husky g used for sale

Spare part, Packing GRACO (WALTHER PILOT) 77725029050 68 x 88 x 40 mm New ! Dimensions : 88 x 88 x 40 mm

Spare part, driver GRACO (WALTHER PILOT) 75473001200 001.085-DP-DRIVE B SATA Vario-Top-Spray 051466 New ! Dimensions : 90 x 35 x 25 mm

Replacement motor for geared motor, electric motor, three-phase motor -Speed: 1400 rpm -Power: 2.8 kW -Design: B14 -Brake -Shaft diameter: 20 mm toothed -Protection class: IP 54 -Weight: 35 kg

Spare part, cylinder, cylinder GRACO (WALTHER PILOT) 76570043001 New ! Dimensions (packaging): 270 x 170 x 120 mm

Spare part, Packing GRACO (WALTHER PILOT) 77725029038 48 x 68 x 40 mm New ! Dimensions : 68 x 68 x 40 mm

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.40 kW 12000 rpm at 200 Hz -Motor: 0.55 kW 18000 rpm at 300 Hz -Receptacle: Collet -Weight: 4 kg

Spare part, rod, rod GRACO (WALTHER PILOT) 76612013002 D 10 L 155 New ! Dimensions : 155 x 10 x 10 mm

Faceplate, faceplate chuck, four-jaw chuck -Mouth size: Ø 320 mm - Mounting thread: Ø 60 mm inside -Weight: 30 kg

Steel holder, clamping plate with T-slot -Tool height: max. 45 mm -Dimensions: 260/160/H220 mm -Weight: 26 kg

Rotary hub drive, center turning device -Outer diameter: 315 -Cone: Ø 105 mm -Bolt circle: Ø 135 mm -Weight: 20 kg

Spare part, rod GRACO (WALTHER PILOT) 76612042002 D 18 L 145 New ! Dimensions : 145 x 18 x 18 mm

MIG/MAG welding machine, MIG/MAG welding machine -Max. welding current: 320 A -2-roller drive -Air-cooled -incl. ground cable -with removable wire feeder -Gas valve -Hose package -Dimensions: 1000/500/H970 mm -Weight: 170 kg

Spare part, bearing cover GRACO (WALTHER PILOT) 75473001040 001.085-DP-Bearing New ! Dimensions : 72 x 72 x 15 mm

Spare part, pressure ring set GRACO (WALTHER PILOT) 76106039001 61.8 x 84.7 x 6.2 mm pressure ring set consists of two pressure rings ! New ! Dimensions (set): 85 x 85 x 14 mm

Open-end wrenches, ring wrenches as remaining stock -various sizes -Weight of tool: approx. 100 kg -Manufacturers: Gedore, Promat, Rahsol -Transport box: 800/450/H320 mm -Weight including packaging: 130 kg

two-arm drill, rotary drill, magnetic drill -Recording: MK2 -Nominal power input: 1150 W -Connection: 230 volts -Max. drill diameter: 23 mm -Dimensions: 460/320/H100 mm -Weight: 6 kg

Magazine screwdrivers, drywall screwdrivers, automatic screwdrivers, automatic drill/drivers -Magazine screwdriver -280 W 0-1100 rpm -with suitcase -Number: 4 screwdrivers available -Price: per piece -Dimensions: 515/285/H75 mm -Total weight: 6 kg/piece

Constant, oscilloscope -220 V 40-60 Hz -Dimensions: 245/270/H185 mm -Weight: 8 kg

Mounting plate, scribing/marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 510 mm -Length: 350 mm -Height: 60 mm -Dimensions: 510/500/H190 mm -Weight: 120 kg

Wood step drill bits, wood drill bits, countersink bits, end mills, drill chucks, click-type quick-change chucks -for: row drilling machine, hardware drilling machine -from: a woodworking shop -15 kg: Milling cutters, drill bits, countersinks, click-type quick-change chucks

Countersink, countersink, deburring countersink -Sizes: 2x20/2x30/3x45/4x60 mm -Countersink: 90° Manufacturer: Bilz -Sale: only complete set -Weight: 5 kg

Radius cutter, milling cutter -Finishing cutter -1x Diameter: 84 mm Height 44 mm R12 mm -1x Diameter: 102 mm Height 53 mm R15 mm -1x Diameter: 114 mm Height 70 mm R20 mm Type: HSS Quantity: 3 pieces -Sale: only complete set -Weight: 5.4 kg

Faceplate, faceplate chuck, four-jaw chuck -Feed size: Ø 450 mm -4: Jaw chuck -Receptacle: Thread -Internal thread: Ø 69 mm -Weight: 40 kg

Plastic sheets, plastic laminate -various sizes -Thickness: 6 mm -Outdoor outdoor area: usable -on: 2 pallets -Sale: only complete set -Dimensions: 1450/3100/H340 mm -Weight: 720 kg

Pipe clamping system, clamps for butt welding machine, butt welding machine, mirror welding machine, pipe welding machine, assembly device for pipes -Capacity: 100-400 mm -Double clamping device: for pipe mounting -Dimensions: 1000/450/H260 mm -Weight: 22 kg

PTO shaft, drive shaft -Discount: You get a 20% discount on this item -Manufacturers: Walterscheid, Jon Deere, Granit -Spare parts: PTO shaft mounts, cross fitting, protective tubes -Partly new, partly used -Sale: only complete set -Price: complete -Weight including packaging: 425 kg

Twist drills, automatic drills GÜHRING UWUK Ø 36 mm HSS DIN 1897 New ! Dimensions: 210 x 60 x 60 mm

Twist drills, automatic drills GÜHRING TKM Ø 38 mm HSCO New ! Dimensions: 210 x 50 x 50 mm

Twist drills, automatic drills GÜHRING FHFK Ø 30 mm HSS New ! Dimensions: 180 x 40 x 40 mm

Twist drills, automatic drills GÜHRING IGD Ø 34 mm HSS New ! Dimensions: 200 x 40 x 40 mm

Twist drills, automatic drills GÜHRING BAP Ø 28 mm HSCO New ! Dimensions: 170 x 40 x 40 mm

Diaphragm valve GEMÜ 690/15/D 02052-1-1106 Dimensions: 280 x 260 x 140 mm

Diaphragm valve pneumatic GEMÜ series 610109 610 / 12 / D1 20 52-1 HP PB 0 - 4,4 5 bar pneumatically operated PST 4 - 7 bar 90°C Dimensions: 110 x 105 x 105 mm

Directional control valve, valve with pneumatic actuator GEMÜ 314/15/M 195-1-1 G1/2 max. 180°C New ! Dimensions: 230 x 100 x 100 mm

Coolant Valve GeMü 514 15D 1 9 51 1

Diaphragm valve GEMÜ 610 / 15 /D28 20 52-1 HP PB 0 - 4.5 bar pneumatically operated PST 4 - 7 bar 90°C Dimensions: 180 x 115 x 90 mm

Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Dimensions: 1000/600/H400 mm -Groove: 45 mm -Weight: 700 kg

Side channel blower, side channel blower, ring blower, vacuum pump -Drive: 1.1 kW -Speed: 2880 rpm -Connection: 1 1/2 inch -Dimensions: 420/280/H340 mm -Weight: 20 kg

Tool holder, milling tool holder -Number: 21x SK50 recording -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills -Sale: only complete set -Weight: 88 kg

Heating elements control unit -for: heating elements -Connection: from the electrode welding machine -Regulator and recorder -Handover in its current condition as inspected -in transport crate -Weight: 80 kg

check valve, check flap -Type: RK 86A -Connection: DN40 -Nominal pressure: PN40 -Total length: 32 mm -Material: stainless steel -Quantity: 1 piece -Weight: 1 kg

Check valve, check valve -Type: RK 86A -Connection: DN15 -Nominal pressure: PN40 -Total length: 16 mm -Material: stainless steel -Number: 2x valves available -Price: per piece -Weight: 0.25 kg

Check valve, check valve -Type: RK 41/44 -Connection: DN15 -Nominal pressure: PN16 -Total length: 16 mm -Material: brass -Number: 2x valves available -Price: per piece -Weight: 0.1 kg

Check valve, check valve -Type: RK 86A -Connection: DN40 -Nominal pressure: PN40 -Total length: 28 mm -Material: stainless steel -Number: 2x valves available -Price: per piece -Weight: 0.75 kg/piece

Check valve, non-return valve -Type: RK 86A -Connection: DN40 -Nominal pressure: PN40 -Total length: 32 mm -Material: Stainless steel -Weight: 0.8 kg

Check valve, check valve -Type: RK 86A -Connection: DN40 -Nominal pressure: PN40 -Total length: 32 mm -Material: stainless steel -Weight: 1 kg

Siemens Sinumerik 840D control system, incl.: Abrasive preparation, hydraulic unit, and portal loading system for loading and unloading the machine, Technical specifications:, Center distance: 600mm, center height: 180mm, maximum grinding diameter: 355mm, maximum workpiece weight: 150kg, maximum Z-axis speed: 11 m/min, minimum Z-axis speed: 0.01 m/min, maximum X-axis speed: 7.5 m/min, minimum X-axis speed: 0.01 m/min, External cylindrical grinding spindle:, Grinding wheel standard (Øa x w x Øi): 600 x 80 x 304.8 mm, Grinding wheel peripheral speed: 5 - 50 m/s, Power consumption of grinding spindle motor: 11 kW, Workpiece spindle:, Taper bore workpiece headstock: MK 5, Power consumption: 2.7 kW, Tailstock:, Taper bore punch point: MK 4, Coolant tank: 2000 liters, lubricating oil: 30 liters, hydraulic oil: 60 liters, Operating voltage: 400 volts, 3 phases, Mains frequency: 50 Hz, Total w ...

Check valve, non-return valve -Type: RK 56 -Connection: DN32 -Nominal pressure: PN40 -Total length: 27 mm -Weight: 0.45 kg

Check valve, non-return valve -Type: RK 86A -Connection: DN40 -Nominal pressure: PN40 -Total length: 32 mm -Material: Stainless steel -Weight: 0.8 kg

Check valve, non-return valve -Type: RK 41 -Connection: DN15 -Nominal pressure: PN16 -Total length: 16 mm -Material: Brass/Stainless steel -Number: 2 valves available -Price: per piece -Weight: 0.1 kg