husky g used for sale

Glass VSM150 Mixer Serial: 2941 150Kg glass mixer, tilting for discharge, stainless lid and sight hole. For marinating and massaging the meat and mixing of liquid, semi-solid and powdery products, with easytouch interval switch for 10 programmes with timer and rest settings, with ,manual, mobile, 3Ph

Qty. 1 Second-hand filtration line Mfc.: Schenk, Anton Paar, Alafa Laval, Gross, Niwa, Pro-Wam Built: 1992 – 2014 Capacity: 250 hl/h

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 32 mm -Stroke: 140 mm -Total length retracted: 460 mm -Admission: hole Ø 23 mm -Dimensions: 460/60/H135 mm -Weight: 8.5 kg

Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 300 mm -Reference: Short cone 8 (139.8 mm) -Dimensions: Ø 300 x 100 mm -Weight: 14 kg

GE Äkta Explorer FPLC 100 Air/General Electric/Cytiva -Box 900 -pH/C 900 monitor -UV 900 UV Detector -UV Flow Cell -P 900 Pump /100ml/min w. Switch Valves Air 900 Control Box -pH Sample -Conductivity Cell -INV 907 Injection V1 Sample Valve V5 Outlet Valve V4 Column Valve V2 Column Valve V 3 -P 960 -M 925 MIxer (2ml) on request 5 and 12 ml) FR 902 Restrictor CU-950 Interface Unicorn Software -Frac 950 Faction Collector warranty

Clamping plate, welding table, welding table, straightening plate -Surface: milled -Cast table -Length: 1995 mm -Width: 1995 mm -Height: 320 mm -Plate thickness: 42 mm -Transport dimensions: 1995/1995/H320 mm -Weight: 1647 kg

Multi-spindle lathe (8 spindles) max. rod diameter 16 mm Guide tubes 4,000 mm Conveyor

GRAFOTRONIC DCL2, Age: 2017/2018  Manufacturer : GRAFOTRONIC  Year of Installation : 2017 with Upgrade 2018  Max. width: 350mm  Unwinding diameter: 1000mm  Web edge control  Semi rotary printing unit  GEW Drying UV  Semi-rotative die-cutting / drawn onto sheet metal  Laminating  Cold foil stamping  Labelshifter  Punching length: 609.6mm  Lattice proofing  manual knife box  Automatic Turret  2 x Spindle

GIDUE Xpannd 1KF 5K0  Flexo/Offset - label printing machine  Year 2010  Max material Width: 370 mm  Max printing Width: 360 mm Equipment:  Unwinder  N. 5 Offset printing units with ink keys remote control  N. 1 Hot foil unit  N. 2 Flexo printing units (one can be screen printing unit)  N. 1 Rotary die cutting unit with Gap Master  Scrap rewinder  Rewinder Accessories:  Offset printing cylinders: 5x (21" – 22" – 23" – 24" )  Flexo printing cylinders: 2x (21" – 22" – 23" – 24" )

Oven Make: Gallenkamp Model OMT150 XX1.C

GALLUS R300  1991  4 colors + varnish  UV  Paper Width: 175 - 310 mm  Laminating width: 295 mm  Die-cutting width: 255 mm  2 x Rotary Die-Cutter  1 x Flat Die-Cutter

New mixing silo: 7000 L. Model: MV-7000, with 4KW geared motor, load auger: 2.2 Kw, discharge auger: 2.2 Kw.

Tumbler Glass Dimensions: 80x100x160cm Electric power: 5kW Volume: 300 liters

CNC pull studs, tool holder, tool holder, milling holder, milling tool -Number: 5 pieces -with: ring groove -for: SK40 holders -Thread: M16 -Price: complete -Weight: 0.28 kg

Machine vise, stable vise, milling machine vise, modular vise -Manufacturer: Gerardi, Modular Vise - Jaw width: 195 mm - Jaw height: 60 mm -Clamping range: 345 mm -Total dimensions: 595/195/H130 mm -Quantity: 1 piece available -Weight: 63kg

Machine vice, stable vice, milling machine vice, modular vice -Manufacturer: Gerardi, Modular Vice -Jaw width: 195 mm -Back height: 60 mm -Clamping range: 450 mm -Dimensions: 695/195/H130 mm -Weight: 70 kg

Rubber mat, rubber plate, stop rubber, stop plate, rubber cover, rubber pad -Gum plate: from pre-tensioning technology -Thickness: 48 mm -Width: 150 mm -Length: 200 mm -Number: 12 pieces -Price: per piece -Weight: 4.3 kg/piece

Gantry milling machine GMB 2560 CNC Manufacturer: Fermat GC: 2023 Control Heidenhain ... TNC 640 Table dimensions ... 6000 x 2500mm Axis X ... 6000mm Distance between stand... 3200mm Passage between .dem table and crossbar... 1900mm ISO 50 Spindle speed ... 40-5500 rpm. Max. table load ... 22000kg Axis Y ... 3200mm Axis Z ... 1250mm Machine weight... 88000kg Main engine power ... 41kW Rapid traverse... 10m/min Total Power Requirement ... 83kVA Average of the grinding piece ... 500x450mm The machine is in good condition, possible to test under electricity.

material width: 500 mm material thickness: 0 mm no. of straightening rolls: 9 weight of the machine ca.: 2 t dimensions of the machine ca.: BxTxH 2000x1500x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Power resistor, wire potentiometer, resistor, braking resistor -Frizlen power resistor: GWADU 320x80-1.7 -Resistance: 300 W 1.7 ohms -Dimensions: 320/80/H15 mm -Weight: 0.8 kg

POWDER COATING LAB HAND GUN WAGNER & GEMA COMPATIBLE, WORKS PERFECTLY WITH THE ORIGINAL CONTROLLER DELIVERY: 100Kv LABO HAND GUN 5m CABLE + COMPATIBLE SOCKET

POWDER COATING HAND GUN Cost effective and long life cascade Made in Turkey

Power resistor, wire potentiometer, resistor, braking resistor -Frizlen power resistor: GWADU 216x120-20 -Resistance: 300 W 20 ohms -Dimensions: 240/140/60 mm -Weight: 3 kg

Flow meter, vibration measurement, display device vibration measurement, monitor display -Manufacturer: Lorenz, measuring amplifier -Type: GM40 -Price: per piece -Number: 5 piece -Dimensions: 75/20/H110 mm -Weight: 0.1 kg/piece

• Weighing area max. 300 g • Belt speed 10-40 rpm • Axis-centre distances feeding belt/weighing belt/outfeed belt 600/200/250 mm • Belt width 100 mm • Resolution d= 0,1 g • Accuracy e= +/- 0,1 g • Temperature area 10-40°C • Weighing cell BF8 D-G-P • Belt direction left to right • Blower discharge • No printer interface • Height adjustable • New belts plastic white • Connection 230V/50Hz

Grafoteam PST 48 pressure plate stacker; good condition; cleaned and tested; Format 811x1200mm; with plate trolley. Plate stacker Grafoteam PST 48; good condition; cleaned and checked; size 811x1200mm; with plate trolley.

Garvens TopLine VS2 inline checkweigher with reject and printer, weight range up to 300 g, calibration value e=0,1 g, accuracy +/-0,1 g, belt width approx. 120 mm, length of infeed & outfeed belt approx. 250 mm, length of weigh cell approx. 200 mm, running from left to right, capacity up to 400 weighings per minute, electrics 230V/50/60Hz, machine floor space approx. 900 x 900 mm (WxD), machine height approx. 1400 mm, machine net weight approx. 85 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder -Manufacturer: GSL, Hydraulic cylinder, tilting cylinder, stroke 1590 mm -Type designation: D040025-Z2 T06 -Piston rod: Ø 25 mm / Mounting Ø 20 mm -Dimensions: 1895/90/110 mm -Weight: 19.5 kg

turn - diameter over facing slide: 450 mm turning diameter over bed: 830 mm turning diameter: mm turning length: 3000 mm control: Siemens total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic pump, oil pump, gear pump -Manufacturer: Garbe Lahmeyer, pump from radial drilling machine Kolb NKR 55 -Type: AV15 / 15 P -Power: 0.6 kW / 1390 rpm -Dimensions: 420/280/180 mm -Weight: 24 kg

Bowl cutter Kramer+Grebe SM 80 Overhauled Technical data overall dimensions 2000x1150x1800 mm; bowl 80 ltr; power supply 400 V, 50 Hz; power: main motor 15/20 kW; bowl motor 1,1/1,4 kW; mixing motor 1,3/1,8 kW; unloader motor 0,75 kW; 2 knives speeds 1500/3000 rpm; 2 bowl speeds; 2 mixing speeds; weight 1500 kg

Condenser Guntner Type: GVH 090.2A/2x5-N(D) Cooling capacity: 1057,2 / 920.7 kW Air flow: 279 000/229 000 m3/h Number of fans: 10 x 900 mm Dimensions: 10200 x 2300 x 1450 mm RPM: 890/700 Volume: 323.8 L Quantity in stock: 2 Stock number: SK 108 Condition: Used

MAX CAPASITY 80 T

Gema, Wagner COMPATIBLE 100kV COST-EFFECTIVE AND VERY LONG LIFE POWDER GUN CASCADES MADE IN TURKEY

Setup station, pallet changing system, pallet changer, pallet storage, tool changer chain, chain magazine, tool changing system, tool magazine -Setup station with: Garant ZERO CLAMP G-11886 -Manufacturer no.: 101545300002672 - 21063 1721559 -Dimensions: 400/400/H810 mm -Weight: 232 kg

Solid state relays, switchgear, switching components -Manufacturer: Gavazzi -Type: RAM1A69D100 3 pieces mounted on heat sink -Price: complete -Dimensions: 300/200/H80 mm -Weight: 3.3 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -LTi REENERGY: Controller E230 G360/1,2 BWrg-CFpux -Power: 1.2 A -Input: 230 V AC 4.5 A -Output: 360 V DC 1.2 A -Price: per piece -Number: 3 pieces -Dimensions: 300/150/H110 mm -Weight: 3.7 kg/piece

PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter -Manufacturer: Phoenix Contact, fiber optic converter -Type: FL MC 10/100BASE-T/FO G1300 ST -Price: per piece -Number: 6 piece -Dimensions: 100/20/H120 mm -Weight: 0.1 kg/piece

drive motor, charging cable, battery cable, battery plug -Battery cable: for electric forklifts -Plug: Type PA6-GF30 -Cable: Arcoflex (J) Spezial H01N2-D25 -Length: 260/590 mm -Weight: 0.5 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 193 mm -Inside: Ø 80 mm -Hole circle: Ø 105 mm -Dimension: Ø 193 x 75 mm -Weight: 4.1 kg

for cap type PCO 28-1881 with Siemens S7 PLC Capacity: approx. 40,000 caps/h with sorting unit with cap control incl. approx. 18 m feeder with 2 blowing stations

Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump -Voltage: 380-415 V 690 W. -Max. Delivery rate: 2 m³/h -Max. H: 36/46 m -Max. Pressure: 6 bar -Max. Temperature: 90 °C -Price: per piece -Number: 2 pieces -Dimensions: 400/143/H203 mm -Weight: 12.4 kg

Brand: GME Triulzi Type: Washing Machine Horizontal Length mm: 6000 Width mm: 3800 Height mm: 5500 Transport size L x W x H: 6,0 x 3,8 x 1,4 Number of brushes: 4 brushes Condition machine : Working disassembled Remaining: Combi with: GME Bavelloni 2x Double Edger (23010)

Grafoteam PST 48 Printing Plate Transport Trolley; Condition New; for panel format 811x1200mm; mobile. Plate trolley Grafoteam PST 48; condition new; for plate size 811x1200mm; mobile.

Crosscut saw, pull saw, chop saw, plunge saw -automatic saw with: burr-free cut -pneumatic tool clamping -Motor power: 0.75 kW -Speed: 1380 rpm -Saw blade: 200 mm -pneumatic workpiece clamping -Max. Cutting height: 40 mm -Dimensions: 1000/930/H1300 mm -Weight: 238 kg

Brand: Zerma, model: GSL 300/800, motor: 18 Kw (25 hp), stepped rotor, year: 2003. With electrical panel and vacuum cleaner: 2.2 Kw (3 hp).

Flange bearing -Bore: Ø 100 mm -Mounting hole: Ø 26 mm -Dimensions: 264/264/H60 mm -Weight: 11.4 kg

Grundfos Water Pump CRN10-02 with Control Pump from 2022, as good as new, complete with control system, 1 available. 0.75 KW, 10 m3/h, 25 bar Manufacturer: Grundfos Model No.: CRN10-02 A-FGJ-G-E-HQQE Serial number: 0001 Type: Water Pump with Control Power [kW]: 0.75 Flow rate [m3/h]: 10 Pressure max [bar]: 25 Pumping height [m] 15 Operating hours [h]: only a few Year of construction: 2022 Weight [kg]: 40

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: NTN -Thread: diameter 32 mm -Pitch: approx. 10 mm -Thread length: 482 mm -Techn. Drawing: see photos -Dimensions: 672/93/H93 mm -Weight: 9 kg

Converter, power supply, power supply unit -Manufacturer: NorthTec GmbH -Type: VCC 3 -Number: 1x available -Price: per piece -Dimensions: 440/255/H135 mm -Weight: 3.1 kg/piece