126,752 used machines on RESALE, but how to find them? Machine Search
GAI vacuum filler + 1 screwdriver head Capacity: 18,000 b / h - 20 ml, 12 fillers
DISPERMAT H-drive Type: 4V30M Power: 0.37 kW Speed: 1400 rpm freely adjustable adjustable even in standstill Life-long lubrication
New. Unused. Adjustable. Dismantled. Inner diameter passage: 155 mm Total height: 190 cm
Graham Radiant Heat Shrink Sleeve Tunnel Tunnel Type: Radiant Electrical: 400 VAC, 3 Phase, 26 Amps Weight: 150kg Conveyor Height min/max: 900 mm/1000 mm Container Height min/max: 50 mm/300 mm Container Diameter min/max: 20 mm/150 mm -Individually controlled radiant heating elements -Polished interior surfaces to maximize heat/radiation reflection -Modular design -Double skin insulated stainless steel construction -Can preheat containers or shrink material after application -Designed to be used over an existing conveyor -Fully controlled internal environment to reduce running costs
Top CONDITION - UEBERHOLT IN 2020 ! Built: 2006 Panel size: 3000 x 1500 x 100mm Power: 2500W Control: Mazatrol Preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. rapid puncture incl. ball roller table incl. 4 fold head change magazine incl. 2 cutting heads Bjgcgttd8s incl. 10x automatic nozzle changer FE: up to 20mm VA: up to 12mm oxide-free designed for high-pressure cutting up to 20bar no foundation ! necessary Optional automatic loading and unloading by Mazak CELL510 is offered with delivery / warranty / commissioning / training always regularly serviced
Spiral kneader Gostol with 2 extendable stainless steel boilers We have 2 kneading machine and 4 boilers in the warehouse. -Stainless steel spiral -Stainless steel boiler -2 speeds -2 timers automatic
Cutting and miter saw • Saw blade diameter: 420 mm • Saw blade holder: 40 mm • Cutting length: 410 mm (at 90°) • Cutting height: 170 mm (at 90°) • Machine can be swivelled on both sides via hand crank (from 90° to left by 45° and from 90° to right by 30° to max. 60°) • HM circular saw blade for wood (420 x 3.4/2.4 x 40 mm 48 WZ neg) • stable cast iron construction • Precise ball bush guidance of the tool slide on hardened and ground steel shafts • Saw feed manually • Miter range horizontal: 45° - 90° - 25° • Miter range vertical: 90° to 45° (left) • re-adjustable fixed stops • Lower saw blade protection can be connected to a suction system (diameter suction nozzle = 100 mm) • incl. machine stand for type 170 N • Weight: 120 kg Engine data: • Power: 3 kW • Speed: 2710 rpm • Voltage: 400/230 V • Rated current: 6.4 ...
Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.
Offer via gebr. outdated pipe cutting and chamfering machine Fabr. GF GEORG FISCHER Type RA8 / RA230 Saw has been completely overhauled and tested. - completely new engine. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.
Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA6 Saw has been completely overhauled and tested. - Engine completely new - Gearbox re-stored and new seals Technical data: Outer pipe diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.
used
Swash-up machine: 2-deck machine: 3.6 m2 / deck product-contacted parts in stainless steel 1.4301 ( AISI ) 2 x Ball knock cleaning Safety clamping screws Lifting device incl. 2 x sied, mesh size as desired: from 0.1 - 5 mm Height of the machine without frame: 1620 kg Weight: 1820 kg. --> Machine completely grounded.
Used forklift Linde H 160 for sale – 16 tons capacity, diesel, built in 1999 We offer a used Linde H 160 forklift for sale, ideal for demanding industrial applications. Technical details: Manufacturer: Linde Model: H 160 Propulsion: Diesel engine Lifting capacity: 16 tons Year of Make: 1999 Equipment: Full cabin Accessories: Long forks This Linde H 160 forklift is particularly robust and reliable, which makes it perfect for transporting heavy loads. Thanks to the full cab, the truck offers optimum driving comfort and protection in all weather conditions. Condition: Used, but well maintained and ready to use. This Linde forklift is an economical choice for operations looking for a reliable material handling solution. Contact us now for more information or to view!
X axis travel 1000 mm Y axis travel 700 mm Spindle travel 300 mm Table dimension 1.100x842 mm Spindle speed 40-2000 rpm Max power input 10 kW Spindle motor 8 HP Total permissible load on worktable 1 ton Machine approximate weight 15 ton
Powder coating system for large parts Example:(all sizes can be changed individually) Space requirement: 30 x 15 meters Part size: L= 6,200mm W= 2,300mm H= 2,000mm Cleaning booth walk-in incl. spray wreath automatic 1 Dimensions of the cabin Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Mass of tanks Length 1,200 mm Width 850 mm Height 1,000 mm 2 Dimensions of the cabin complete Length 9,140 mm including tanks width 5,580 mm Height 4,200 mm Coating booth walk-in, manual coating Lmmuapd8S 1 Dimensions cabin length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions of the cabin including extraction Length 10,125 mm Width 4,500 mm Height 3,400 mm Powder curing furnace 1 Inner dimension length 6,500 mm 2 Inner dimensions width 2,500 mm 3 Internal dimensions height 2,950 mm 4 Outer dimensions incl. thermoblock length 7,600 mm 5 Outer dimensions incl. ...
Our Edwards GV600 dry vacuum pump is after the general overhaul: absolutely new checked according to manufacturer specifications, so all games and dimensions are in the tolerances equipped with new wear parts available at short notice includes one year warranty After refurbishing, our Edwards GV600 Dry pump will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty
Our Edwards GV250 dry vacuum pump is after the general overhaul: absolutely new checked according to manufacturer specifications, so all games and dimensions are in the tolerances equipped with new wear parts available at short notice includes one year warranty After refurbishing, our Edwards GV250 Dry pump will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty
GK90E Mixer Manufacturer : Harburg Freudenberger Maschinenbau Machine type : Internal mixer Model number : GK 90 E Year of construction : 1987 Chamber volume : 90L Standard rotor speed: 10-50 1/min. Rated motor power : 440KW. Main drive 1850 A Rotor geometry : PES-5 Machine parts : Baseplate Mixer Body Feeding hopper Pneumatics system Gearbox KWE Couplings ESCO Gear CST 220 Complete with motor Main drive Leroy Somer Hydraulic unit Gearbox Lubrication unit Dust seals Lubrication unit Grease pump PLC Advise 2.0 (control cabinet) without server
Offer via gebr. outdated pipe cutting and chamfering machine Fabr. GF GEORG FISCHER Type RA8 / RA230 Saw has been completely overhauled and tested. - completely new engine. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.
Edeleanu GmbH / Shell Lube Oil Hydrotreater 1 (LHT-1) (1972/2015) Year: 1972 Make: Edeleanu GmbH / Shell Hydrotreating to produce lubricating-manufacturing oils, sulfur-free, few aromatics, light color, color stability (aging). Year of manufacture 1972 Process Design by Shell Process Engineering by Edeleanu GmbH Feed = Paraffinic or naphthenic distillates (range of Viscosity = 2 – 160 cst/40°C) Throughput max. 550 t/d (approved), 600 t/d possible (yield range 72% – 96%) Operational operating temperature = 355°C (Reactor WABT = Weighted Average Bed Temperature) Operational operating pressure = 140 bar 1987 – Capacity expansion of the C-5401 to 550 t/d (previously designed for 400 t/d) 2015 – Revamp to operate with pure Hydrogen Make-Up gas (99,99%) 2015 – New column C-5407 (separation of slops into HTFR and HTTOPP) 2021 – new furnace (F-5401) 2021 – Const ...
Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.
Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.
Centrifuge Megafuge 1.0 Manufacturer: Heraeus Sepatech GmbH Y.O.M.: 1992 Factory no.: 193398 LWH: 540 x 460 x 380 mm
Attention: Before purchasing a used universal tester / tractor, consider the old, used machine (all?) need new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – an expensive impasse! Purchase, pickup, software update (if possible?), commissioning, modernization are more expensive than a new galDABINI machine Quasar 600 kN incl. load cell 600 kN, Latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 | 200 | 250 for tests on steel, reinforced steel, plastic, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Q ...
Pizza oven with one floor, hood, and fermentation chamber GMG The baking chamber is completely made of refractory stone Temperature range: 50 to 400°C The front side made from stainless steel Digital control Upper and lower heat are separately adjustable Digital monitoring for upper and lower heat settings Digital error code system Heavy-duty temperature-resistant door with tension spring Double-glazing door glass for strengthened insulation and air circulation External dimensions: 149x110x156cm Internal dimensions: 105x70x15cm Electric power: 1 x 8 kW - 3NAC I 400 V Fermentation chamber: 149 x 93 x 90 cm - 3kW and 230 V Weight: 320 kg
Pizza oven with two floors, hood, and fermentation chamber GMG The baking chamber is completely made of refractory stone Temperature range: 50 to 400°C The front side made from stainless steel Digital control Upper and lower heat are separately adjustable Digital monitoring for upper and lower heat settings Digital error code system Heavy-duty temperature-resistant door with tension spring Double-glazing door glass for strengthened insulation and air circulation External dimensions: 149x110x194cm Internal dimensions: 105x70x15cm Electric power: 2 x 8 kW - 3NAC I 400 V Fermentation chamber: 149 x 93 x 90 cm - 3kW and 230 V Weight: 500 kg
Product number: 1832 Type: VM400/30 Serial number: 001 Belt width: 400 mm Capacity: max. 30 strokes/min Air consumption: 6 bar Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2000 x 800 x 1800 mm Weight: 550 kg
RMH G 25 New Manufacturer: RMH Roller cutting width: 1200mm Roller cutting height: 1300mm Dimensions ( L x W x H ): 2200 x 1300 x 2500 mm Drive: 11 KW Manual working procedure Two-handed operating system Cutting force: 25 tons (1x cylinder) Total weight: 3600kg
The machine is in good condition and was only used as a back-up machine for 10 years. It has been cleaned and extensively tested. so that it is immediately ready for use. The scale is calibratable. The conveyor belts are functional but no longer so beautiful. The display and computer were renewed in the last week of production. Type: S3 Rejection: Pusher Year of Make: 2006 Screen: X-Terminal HMI Dimensions: 1330 mm x 900 mm x 1700 mm. (L/W/H) Load cell: TF20 Capability characteristics: • Legal-for-trade design • Classification in up to 7 weight classes • 115/230 V~, 50/60 Hz, 1 phase, 500 VA • Automatic or manual zeroing • Various switchable program languages • 100 item storage • Flexible integration into production lines •Password S-Series Weighing Terminal: • Touchscreen color display, TFT 15 inches, • User-friendly: TachoControl, menu nav ...
Stock - No. 2537 1 used,, functionally tested cutting mill/granulator Manufacturer: Alpine Hosokawa Type: RO 50 / 80 Built: 1993 Material feeding hopper: 500 x 840 mm Opening hydraulic Rotor diameter 500 mm x width 800 mm Rotor semi-open, 4 rotor V-cut - 2 Fixed blades Drive 55 kW Sieve diameter 10 mm Blower and Cyclone Throughput up to approx. 800 kg/h depending Material Machine is ready for demonstration from the Wuppertal plant, Date by appointment More granulators from stock ready to show, Ask for our current stock list or visit : plasticotrading
Qty. 1 Second-hand shot blasting chamber unit Mfc.: Getrasur Blasteco Type: BLASTECO PC-BE 2466 Built: 2007 Stopped: 2022 with complete handling equipment Dimensions: 24.0 x 5.85 x 5.95 m – L x W x H Construction: Modular bolted – steel sheet elements. The frame structure consists of 7 internal frames and 2 edge frames. The edge frames form the gate porticos. Access: Main roller shutter gate (2 pcs.), motorized - electrically driven Gate clearance: 5.0 m x 5.01 m (width x height) Consist of: Control cabinet GETRAFLEX abrasive recovery floor Recirculation machinery Recovery and separation system Lighting (top, side) Automatic gate (x2) Service doors (x2) Cleaner (x2) Dust extraction ventilation
Falcon fryer Model: G1860 Serial: F211990 Stainless, single tank with twin basket, 24L oil capacity, 32.2Kw, natural gas
Grote modular slicer SNP412 Serial: 1117803 Stainless frame, up to 120 strokes per min, product size 101.6mm x 300mm, slice thickness up to 9.52mm, mobile, 1Ph
Hydraulic fish block shredder for frozen fish blocks with cross section 350x100 mm. Design: completely in stainless steel Operating pressure: 140 bar Speed: 50 rpm Oil consumption: 40 l/min. Dimensions: 1002 x 417 x 1148 mm Weight: 150 kg
Preparation vessel for liquids 75L Giusti Capacity: 75 litres Maximum internal pressure: atmospheric Maximum external pressure: 3. 3 Minimum internal pressure: atmospheric Minimum external pressure: atmospheric Internal pressure test: water filling External pressure test: 5. 0 Internal working pressure: atmospheric External working pressure: 3. 0 Internal and external temperature: 150 °C
Pressure air compressor, make CompAir / Geveke, type: VMHD 500, for 735 rpm, 21.5 bar, built 1985.
Pressure air compressor, make CompAir / Geveke, type: VMD 750, for 735 rpm, 8.5 bar, built 1991.
Due to new motorization In the current state Expanded turning hours plus minus 42,000
High-frequency degaussing tunnel - 500x150 mm Properties Article number EDTR501505 Tunnel length 160 mm Passage size 500x150 mm Mounting interface Mounting hole Ø12.5 mm (8x) Material housing Polyurethanes (PUR) Surface treatment/finishing Painted Colour Red (Traffic red): RAL3020 Min./max. ambient temperature -10 to 40 °C Dust/water protection class IP55 Supply voltage 230V AC+N+PE; 50/60 Hz Apparent power 4268 VA Duty cycle 100%, 24 hours/day Control Not included Thermal protection Yes Indicator light demagnetizing on (blue) Yes Depth 230 mm Width 880 mm Height 467 mm Weight 135 kg Read more Price on request Article number: EDTR501505 Product These tunnels demagnetize long products and materials with an irregular surface. For thin-walled products up to 10 mm wall thickness or solid products up to 20 mm thick. High-frequency tunnels demagn ...
20121 - MARINE GEARBOX TK 600S - 571 HP AT 2100 RPM - RATIOS 1.97,2.53, 2.75,3.04, 3.42 Brand Gearbox TK Model Gearbox 600S-1 Ratio 1.97,2.53, 2.75,3.04, 3.42 Power 571 HP RPM 2100 RPM General condition BRAND NEW Status AVAILABLE SPECIFIC INFORMATION Sae housing SAE 1 Flexible coupling YES AND ALU. FLANGE Controls NO SPECIFIC FEATURES Brackets YES Oil cooler YES DIMENSIONS Weight (kg) 600 KG
- Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Threading in steel ST 60 to M 42 - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Drilling spindle speeds infinitely adjustable 60 – 1100 rpm - Right - Counterclockwise rotation - 3 feeds 0.1 / 0.16 / 0.25 mm/rev - Projection 350 mm - Max. distance between drilling spindle – table / base plate 790 / 1210 mm - Table with 2 T-slots 630 x 540 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.8 / 3.5 kW - Space requirement approx. W 600 x H 2050 x D 980 mm - Weight approx. 650 kg - with: - Emergency stop button - - Lighting - keyless chuck 1 - 13 mm - Coolant device - Machine vise - various 20 pcs HSS – Twist drill bits 8 – 20 mm
Brand Gearbox TK Model Gearbox 600S-1 Ratio 1.97,2.53, 2.75,3.04, 3.42 Power 571 HP RPM 2100 RPM General condition BRAND NEW Status AVAILABLE SPECIFIC INFORMATION Sae housing SAE 1 Flexible coupling YES AND ALU. FLANGE Controls NO SPECIFIC FEATURES Brackets YES Oil cooler YES DIMENSIONS Weight (kg) 600 KG
ID3420 Geotec Rotomax XL GTCi year/Baujahr 2012 approx. 10,000 hours/hours 15 t Crawler drilling rig, Flush drilling rig, double-head rig, drilling with protective casing, geothermal energy up to 250 m depth - diameter up to 180 mm, well drilling up to 100 m depth - up to 400 mm diameter, power 168 KW, with 150 m drill pipe (90 mm) and 30 m protective piping (178 mm) Crawler drilling rig, flush drilling rig, double-head rig, drilling with protective casing, geothermal energy up to 250 m depth - diameter up to 180 mm, well drilling up to 100 m depth - up to 400 mm diameter, power 168 KW, with 150 m drill pipe (90 mm) and 30 m protective casing (178 mm)
CNC Lathe Gildemeister CTX 200 Series 2 Immediately free from location: CNC Lathe Gildemeister Type CTX 200 Series 2 Built in 2001 Operating hours 39,000 CNC Control Heidenhain 4290 TP Turning diameter 210 mm Turning length 305 mm Reiststock revolver 12 driven tools Conveyor Bar loading magazine Max travel plan 160 mm Max travel length 350 mm Spindle speeds up to 5000 rpm 2 simultaneous axes with C axis 1 controlled spindle 12 driven tools Collet pliers with hydr. Hollow clamping device up to 43 mm Workpiece pick-up device up to 56 mm very many tools
Automatic powder dispersing system in EEx protection Make: Pierre Guerin Type: Blending System SM 20 Y.O.M.: 1994 Power: 2.5 kW Plant number: 4461 - 4450 Pump supply and output electro-pneumatic valves as good as new on mobile tub bowl Dimensions LWH: 1500 x 1100 x 1150 mm Weight: approx. 700 kg
CHP combined heat and power plant with 2 x 910kVA generator from a biogas plant with gas engine Waukesha Model: P48GLD 1 generator installed in the container 1 generator disassembled as a spare donor (or reconstruction) Manufacturer: Zantingh Groep Holland Type: Tantec 630 HR Motor 1-2 Ser.Nr: 975100 Y.O.M.: 1997 Total weight engine 1: 17000 kg Generator Manufacturer: Stamford Type: HC.1624M2 No./Y.: C077726-02/1997 AVR - Mx321 Power: 910 kVA, 1500 rpm 400 V; 1313.5 A; 50 Hz; IP22 Diesel/gas engine Manufacturer: Waukesha Model: P48GLD No./Y.: 80464-01/1997 Fuel: Nat.-GAS / Biogas Power: 726 kW; 1500 rpm other components - Control/switch cabinet of nib-elektrotechniek with Zantingh Master-Control - Grundfos pumps - Plate heat exchanger - Silencer - various wiring and piping - Housing container with ventilation Container Dimensions Wide approx. 3.70 ...
Waste separation plant - unpacking plant Food Waste Disposal plant / separation and separation plant for food & industrial waste. The innovative wet-separation plant for the treatment and separation of mixed, packaged and unpackaged waste. This plant is a solution for the settlement of the TA municipal waste of the Waste Disposal Ordinance, which prohibits the disposal/landfilling of untreated, organic, biodegradable municipal waste since 1 June 2005. By processing and separating organic and/or municipal waste, we reduce the pollution and provide a larger volume of high-quality biomass for recycling. If waste has previously been landed untreated, such waste is processed and recycled. The organic components are returned as compost or biomass for the production of renewable energies, which leads to a significant reduction in landfilling and thus the associated methane emission. ...
MECHANIC SYSTEM GM6VW industrial air filtration system was built in 2014 in Poland by Mechanic System Sp. z o.o. The machine is used in air filtration from dry impurities generated during various technological processes. Thanks to the use of patron filters with a large filtration area, the machine achieves an efficiency of up to 99.999% in class M, enabling recirculation of cleaned air back to the production hall. Dust accumulated on the surface of the patron filters is cleaned automatically by pulses of compressed air during machine operation. Moreover, the vertical positioning of the filters increases their vitality and significantly reduces operating costs. The MECHANIC SYSTEM GM 6VW dust collector has a fan installed directly on the filter chamber and is offered together with a controller and existing piping. Technical specifications of the MECHANIC SYSTEM GM6VW dust extraction un ...
Precision machining center, control Siemens Sinumerik 840 D Solution Line, travels: X-axis 400 mm, Y-axis 500 mm, Z-axis 425 mm, spindle spacing 400 mm, version with 2 independent Z-axes, 5th axis 2-axis direct driven, 2 - work spindles HSK-A63 1-17,500 rpm, drive system torque motor, equipment including: rotary distributor, tension bridge supports, pressure amplifier pneumatic, tool magazine ges. 120 tool positions (2 x 60), pressure changeover hydraulic, clamping hydraulics basic module, high-pressure pump 70 bar, emulsion mist separation system, automatic loading door, air interrogation control, inductive tool breakage control, tool life monitoring, scraper belt conveyor KNOLL 800 K-1/400, cooling lubricant cleaning compact belt filter KNOLL FKA 1200 and much more.
maximum number of results exceeded
please refine your search
