husky g used for sale

The machine is equipped with controlled B-axis smallest delivery 0.001, swivel range 340, controlled workpiece spindle stick (C-axis)smallest delivery 0.05, max. 42 rpm, equipped with an external grinding spindle (left and right spindle end), 1 internal grinding spindle. For an additional charge, a second internal grinding spindle can be delivered. Z-way 680 mm, X-way 255 mm, smallest delivery of the axles 0.001 mm. Tip height 175 mm, W.-stock MK 5, step. adjustable 1 - 1200 rpm, external grinding spindle 1000 - 3000 rpm, max. grinding wheel perm. 300 mm. The machine is suitable for ideal for the processing of carbide and technical ceramics (SIC and Al 2). Intermediate sale:reservations Delivery time:4-6 months

Low pressure blower GMB 14.8, Y.O.M. 1994, with 11.8 m3/min. volume flow at delta-P = 360 mbar, P1 = 0.64 bar. Drive 44 kW / 1.485 UPM, with check valve, overpressure valve, tank, air filter, base and sound insulation hood.

We have a laser for sale, wery little used. Manufactured year 2000 and complete with documentation. Editec AB

cylinder head completed with valves+springs recondioned at stock now! MIW GmbH Nord-West-Ring 8 D-27404 Zeven-Germany phone: 0049(0) 4281950583 fax : 0049(0) 04281950585 mail: info@miw-zeven

Technical data: Clamping opening max.: 850 mm (950 mm) Clamping claw opening max.: 620 mm Output of the main voltage: hydraulic Cutting length: 6000 mm Number of clamping planks: 4 stubble - Incl. new running rails - stiffened in profl steel construction with cross-beams - Single buck adjustment - Cutting staer adjustment, multi-chain drive and ball-bearing connection shaft by electr. Positioning drive. - Automatic lubrication for saemt rails and Guides. - Low wear and high adjustment speed due to central hydraulic clamping claw adjustment with automatic Clamping pressure reduction in case of retracted clamping claws - Trunk can be in the tense state in the Laengaxis to be aligned - Cutting of conical timber or cutting parallel to the Tree edge possible - 3 pairs of regular turners "Quick Turner" - Wheel mount directly connected to clamping buck bottom, thus  ...

plate heat exchanger Gea Ahlborn with 2 centrifugal-pumps:(hotwaterpump and recirculationspump) Manufacturer: Gea Ahlborn 6 Sections: preheater 1,preheater 2,heater,precooler 1,cooler,hotwater Type: VT 4 P (1.4401) Fabr.Nr.: 177/4113 flow rate: ca. 750 ltr/h (5 to 72/75°C) - 80 % gain of heat day of construction:1994 weight : ca. 220 kg Dimension : length x width x hight: ca. 103 x 44 x 143 cm

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: 1 piece used gas nipring plant, make: Aichelin Useful: 1000 mm Useful length: 3000 mm 2 pieces of retort (one of which is only 4 years old and little used) 1 piece storage shaft 1 piece washing machine All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator informat ...

PVS Micro cut model MC 12 Machine for chopping up of various products engine 9 kW of U / min. 3000 funnels state kind 45 Litre of other funnels größen on wunsch and against surcharge

Roller splitter type RGS 25, RGS 35 and RGS 50 For the efficient recycling of residual and scrap rolls from the paper/packaging industry, printing companies, etc. The hydraulic roller splitter is suitable for cutting paper, cardboard and plastic foil rolls/balls, as well as for aluminium foil and is mainly used for the recycling of residual and scrap rollers, as well as for the crushing of start-up clumps. The roller cutters are available in various performances in terms of cutting force and roller dimensions. Rolls with a maximum width of 3,000mm and a diameter of 1,200mm can be processed. Special models for processing rolls with particularly large dimensions are also available. As an experience, we offer special material feeding techniques, as well as automated feeding and removal techniques. With regard to personal/occupational protection, we offer optional prot ...

Ladies and gentlemen, Offer: TRANSPORT Grain wagons TYPE Uagps For rent All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buyer's own expense and at the buyer's own expense. We cannot be liable for personal injury and damage to property in the case of dismantling by the buyer in this context. Place  ...

Length: 4,700 mm Roll width: 800 mm Roll spacing: 650 mm Roll diameter: 168 mm Recesses: 4 Drive power: 2.2 kW 83 rpm. - mounted with ball bearing rollers on profilesteel frame - Drive by special gear motor - Praezisions roller chain - spring-loaded lashing compensation

The company Centrimax - Winkelhorst Trenntechnik GmbH is specialized for over 30 years on the delivery of used centrifuges, like decanter centrifuges, disc stack centrifuges, peeler centrifuges, pusher centrifuges, worm screen centrifuges etc., of the makes GEA Westfalia Separator, Alfa Laval, Flottweg, Siebtechnik etc. The centrifuges are delivered by us fully reconditioned and with warranty. Our stock includes several hundreds of centrifuges for the clarification and the separation of suspension and liquid mixtures, as well as for the thickening and concentration of sludges. Ask us if you search consultation in the solution of problems in the area of the centrifugal separation technology. Buy from the specialist!

Back-pressure turbine Manufacturer: Fa. KKK First Start-up: 2002 Operating Hours of Turbine: 30,000h Type: CFR5 G6a Power Max: 2500 kW Operational efficiency: 2200 kW Revolution number: 23000 rpm Live steam pressure: 65 bar Live steam pressure temperature: 480 oC Evaporation pressure: 1-17 bar Investments in the year 2002 Entire steam transforming station from 63 bar to 2.5 bar renewed in 2002, El. Generator Leroy Somer, el. Power 2 MW Renewed measuring Entire -, governing and control of the turbine renewed Steam turbine renewed Installed boiler efficiency: Boiler I Hard coal Steam generation: 20 t/h, 63 bar, 495 oC Boiler II Hard coal Steam generation: 13 t/h, 34 bar, 425 oC Boiler III: Combination burner for oil and gas Steam generation: 20 t/h, 17 bar, 285 oC General overhaul of the entire plant from 2002 to 2004 Steam generator renewed automatic cole-loader ...

Ladies and gentlemen, We are pleased to inform you that we are in the fortunate position of being able to offer larger quantities of cereals. Larger quantities of the different varieties could be supplied. Please let us know if you are interested in an offer. When making a request, we ask you to specify exactly what kind of grain, what quality and what quantity you or your customer need. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty  ...

Vertical CNC centre lathe, uses / outdated machine type: Emag VSC 200 control: Siemens 840 C construction year: From the in 1995 to the in 2007 overtakes TECHNICAL DATA: speed area / speeds: [1 / min].: 6,000 Drehmoment:/torque [Nm]: 480 Max dreh-? over bed swing diam .: 290 mms impulse achievement / power: [kW] 34 feed ? / chuck diam. 200 mms revolver / turret: 12-fold, VDI 40, shoemaker powered work witness / driven tools 7.8 kW Verfahrwege: X axis / x-travel: 550 mms Z-Achse/z-travel: 200 mms express way / rapidly travel: (X/Z) [m / min] 30 / 20 prepush / feeds: (X/Z) [m / min]. 11 KN connected load: [KW] 36 kW machine weight: [kg] 6,500 equipment signs: filings sponsor / chip conveyor, crowd

Cylinder head complete with valves in exchange info@miw-zeven.de

Thyssen Krupp model GK270NC Banbury type internal mixer, 4 wing tangential rotors, Year of manufacture: 2003 Latest Continental design chamber! Hydraulic hopper + power pack. Body and hopper only in good condition. Unidrive gearbox and motor can be quoted for if required (same centres as 11D or F270).

Gaulin Microgap Homogenisierventil, mit 2te Stufe. Sehr guten Zustand.

New plastic handles for drawers, tool cabinets, etc. 380 pieces. Partially original packaged. Price reduced VS €/piece

technical data: Rank: 10 90 curved Transport by roller link chain and steel chain wheels Drive without motor

Stock number: UG5830 Used chamber filter press by FILTRI DIEMME model GIGANTE 1500. Frame type 1500 mm x 1500 mm /90. Press has 85 pp plates with bottom feeding inlet. Filtration surface about 321 m2. Press is equipped with control panel, Willet sludge pump designed for work on pressure 10 bar, polymer dosing system, cake washing system, photocell safety system. Plates designed for work on pressure up to 15 bar. Closing pressure 385 bar. Dimensions: length 10 m x width 2 m x height 2 m. Reported output up to 30 m3 of sludge per hour.

used, kpl. 1 year warranty, plate size 630 x 630 mm, 45 plates, open outlet, 25 mm cake thickness, pressure max. 15 bar, capacity approx. 350 liters, filter area 28m2, dimensions 4200 x 1100 x 1700 mm, weight 2 to, motor hydraulics, drip plate, filtrate channel, with or without filter cloths

Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.

VHM shank cutter from Garant (20 3160 - 20) lightly used, DIN 6527, type N, D= 20 mm number of teeth - 8, ask also for other quantities from the cutters. Price for 10 pieces 240,-€ for 1 piece 25,- €

2 pieces of loading cells / storage cells 90 sqm3 Smooth wall with 2 funnels Dimensions: 2600 x 5200 x 6706 mm + funnel and substructure Exit slider 250 mm 250 mm Available Mob. +491715213204

Gaulin 2 stage MicroGap homogenising valve. very good condition.

Crosscut and miter saws with maximum cutting height of 200 mm stable grey cast iron construction precise ball bushing guide of the tool slide on hardened and ground steel shafts Manual saw feed fast up to 65 ° horizontal MITRE setting and 60 ° vertical for adjustable fixed stops lower blade guard to extractor can be connected Machine mounted on mobile machine base with 1,5 mtr. long rollers left and right left side with scale and stop position slider Technical data: Engine: 400 V / 5.0 kW Speed: 2800 RPM Cutting length: 420 mm (at 90 °) Cutting height: 200 mm (at 90 °) Miter range horizontal: 45°-90° - 20 ° Miter range vertical: 60° - 90°-30° Saw blade diameter: 520 mm Dust nozzle: 100 mm Weight: 490 kg

The blower is with side admittance completely with impulse.

Grote & Hartmann, 380V,50 Hz, 0, 45Kw, Fabrikatnr. 5618/84

Bottles-cleansing machine 12000 bottles / h completely V2A

Attachment: Chamber filter press - as good as new, demonstrator Hours of operation: No Usage area: Chamber filter press, pilot plant, wine press Design: page Holm led Filter plate format: 390 x 390 mm Plate number: 14 Filter plates: PP Thickness: 25 mm Filter cloths: optionally available in voting on the medium Procedure: open Filter surface: approx. 2.8 m sq Presses contents: approx. 35 dm3 PCB package length: 391 mm Filter pressure: 15 PSI Plate transport: manually Frame: Steel Product-contacting parts: PP + stainless steel Dimensions: Lxwxh approx. 1695 x 750 x 630 mm Weight: 610 kg (photo identical plant) Pumps: optional Purchase or rent: Tours of the facilities in consultation with us to work. Added: multiple attachments are there about End of April available. Order please, because the demand is very high. You want to rent this facility or to buy? Contact us, we are available.

1 rimless hydro extractor made KRANTZ, type GLEITSCHWINGER 1500 x 600 inside basket diameter 1.500 mm inside basket height 600 mm

Material conveying stations for powdered materials, on movable base, with material dropler in V2A (dimensions 700 mm x 700 mm, incl. protective grille inside), blow-through cell wheel lock in V2A (200 mm , 0.55 kW drive) Fabr. Seeger, AerzenER GMA rotary piston blower incl. drive, air filter, compensating vessel and control cabinet.

Chamber filter pressing rack Filox uses 1200 x 1200 with approx. 100 records

GLIMEK Dough Divider SD-180 - exhibition machine, brand new condition, year of manufacture: 2024 - working range 50 - 1.000 g, 120 - 1.600 g or 180 - 2.300 g, capacity range 750 - 1.800 pieces per hour, frequency converter drive for infinitely adjustable machine speed, 90 liter hopper made from stainless steel, machine covers made from stainless steel, mechanical flour duster made from stainless steel power supply: 1.1 kW, electrical supply: 400V/50-60Hz/3~

Chamber filter pressing rack Netzsch uses benefit length: 3,500 mms record transport unilaterally not available the machine served as a spare part bearer, is entire incl. wheel tins.

R25972/18 GUSCHKY spiral sleeve wap-around arrangement age: 1990 available: immediately wap-around machine manufacturer: Guschky technical details: region inside diameter 20-100mm region wall thickness 5mm Max. belt speed 50 m/min Motor speed ca. 10 kW voltage 220V Three phase system electricity 50 Hz Air pressure 6 bar -------------------- pneum. saw: manufacturer: Guschky age: 1990 technical details: region inside diameter 20-100 region wall thickness 4.5mm Sleeve length 400 – 6100 mm --------------------- Unwinder and Gluestation manufacturer: Gasser age: 1986 technical details: gluer dip coating Number paperweb 8 + 1 seperate cover web Available: sofort

Used rubber extruder make Troester, type GSV 60/k-12-18D-m.S., Execution as desired, with or without vacuum Built in 1991, machine was in operation until the beginning of 2010 Feed roller Kpl. new drive with flat gear motor Screw speed max. 62 rpm. Engine power 22 kW Control with PLC and temperature control new on request Extruder similar to attached photos.

Used Troester rubber extruder type GSV 60/k-12-18 D with feed roll can be modified/overhauled according to customer\s specification, with or without vacuum, year of construction: 1991 machine was in operation until end of 2010. including feed roll, new drive with flat-gear motor screw speed: maximum 62 rpm motor power: 22 kW PLC control and TCU can be renewed, if requested.

The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

Pneumatic valve DN 300 Manufacturer: Jaudt Dosiertechnik Maschinenfabrik GmbH Type: Varioschieber FSV Opening width mm: ø 350 Height mm: 130 Max.Working temp. ° C: 80 Operating pressure MPa: 0.6-1.0 maximum operating pressure MPa: 0 Control voltage V: -. Housing: one-piece cast housing in flange version the round face with coarse good Chicane Sealing: slide sheet implementation for with Adjustable stuffing seal Pressure piece from cast aluminium alloy Blade: Stainless steel 1.4301 Slide sheet: eccentric screws galvanized Finish: Stainless steel and aluminum parts blank Grey cast iron housing painted in RAL 9006 Steel parts zinc plated, 10 & #956; m Plate made of aluminium Housing material: Cast aluminium alloy (AlSi 10 mg) shock-proof up to 5 bar Flanschbohrbild: According to DIN 2501 PN 6 Packing material: ARAMIDE (Tmax 280 ° C) Operation: pneu ...

Capacitive Rod electrode type 23.02 ex with WHG approval Manufacturer: Vega Grießhaber KG Type: 23.02 ex Overfill protection by means of a vibrating level switch as a swing fork sensor in compact design with threaded connection, pipe extension, as well as one in the Sensor housing built-in two-wire electronics. The probe is a general-purpose vibrating level switch for all liquids. Regardless of the mounting position she detects the level of border safe and perfectly. The instrument can be full or empty message, as approved overfill or dry running pump protection be used in containers. The position of the switching point is set via the tube extension. The probe offers highest reliability and security in a wide range of applications. New price: approx. 900

Q Ferquenzumrichter 140kVA ABB - AV GmbH ACS607-0140-3 Fig. 4 quadrant converter (Rückspeisefähig!) compl. built in switch cabinet. Dimensions H = 2010 T = 640 B = 1200 (2-door). Technical data: Eingangsfreq. 46.63 Hz Ausgangsfreq. 0.. 300 Hz U = 380TH. 415V IP21 (Cabinet) Wiring diagrams available ABB Manual: ABC://abc05.ABB.com/global/Scot/scot201.nsf/veritydisplay/fdc8e06693b9 114ac2256df0003fe70e/$file/en_6047hw_5d_scrres_plus_update_note.PDF Net price in FU Wardrobe (2 PCs.) 6,500 Questions under 0170 / 2204056 or fa.raupp@t-online

Heating with hot water and heat exchanger. Air filter and Verteilkänäle. Type I engine number 918005 0720.25.20

Stackable container Manufacturer GEMP and UDE inside polished Pharma Manhole diameter 450 mm Drain valve DN 80 Weight: 300 kg Number of pieces: 8 pieces available

Hydrostatic pressure transmitter with metallic measuring cell Manufacturer: Vega Grißhaber KG Type: D36G 0.2 EXB Continuous level measurement by means of a hydrostatic Pressure transmitter with metallic measuring cell in compact design with Threaded connection, flexible cable extension as well as one in the sensor housing built-in two-wire electronics with analog signal transmission 4 ... 20 mA/HART suitable for a separate evaluation device e.g. type VEGAMET 381 Ex. Scope The pressure transducer is a pressure transmitter for pressure and level measurements of liquids and viscous fillers with higher temperatures in the chemical, food and pharmaceutical industries. The pressure transducer offers the possibility to detect even the smallest measuring ranges from 0.1 bar. Your benefits - Highest measurement reliability even at rapidly changing process temperatures - High ...

Abrbeitsbreite / working width 1250 mm

Silo used approx. 75 m ³ / 75,000 litres polyester silo / GRP silo standing, with or without frame, good condition Dimensions: approx. Ø 3,0 m x 12 m high without frame Bulk density 1, 2 t / m ³, Speidel tank, The container can be used as storage tank for water, liquid food, whey, potato steam skins, molasses, grain, salt, rain collection tank, and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de

79210 Mauzé, France Year of construction: 1996 Type: PV35.Z N691.E6280312 Transmission: SEW USOCOME Type: RF72LP 132S / M Hagenau France n1 = 1400 min-1, n2 = 275 min-1 Engine: Constructions Electrique Nancy Power: 5.5 kW Type: R-132 S-4 No.: 674975 n = 1420 RPM Protection class: Exx