130,271 used machines on RESALE, but how to find them? Machine Search
used
Steering cabin for gate, suspended movable Stock No.: aso879 Make: Möhringer Year of construction: 1994 Machine number: M9401 Dimensions: Width: 2.80 (m) Depth: 1.70 (m) Height 1.90 (m)
Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Passage flap / retractable gate / hinged element Manufacturer: Interroll Condition: Good (Used) Model: Casters - with drive Total width incl. feet: approx. 890 mm Conveyor width: approx. 660 mm Total length: approx. 1300 mm Minimum height of the upper edge of the roll: approx. 700 mm Wheelbase: approx. 75 mm Roll diameter: approx. 50 mm Including 24 V motor Stock: 12 pieces Price per piece The conveyor system has run until it was dismantled. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading ...
Forged gripper, manipulator forged gripper, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 250 mm -Load capacity: 1,000 kg -Quantity: 1 piece available -Dimensions: 730/240/H860 mm -Weight: 118 kg
Hydraulic surface grinding machine Kair TM800x400. Max. table travel: 800mm. Max. cross travel: 400mm. Height over grindstone: 260mm. Main motor power: 3hp. Speed: 2000rpm. Grindstone: 250x40x76mm. Max. dimensions magnetic chuck: 600x300mm. Weight: 1800kgs. Dimensions: 2500x1500x1900mm.
Transnorm belt conveyor belt conveyor 1252-600-500 gate passage RA2049 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 1251 mm nominal/outer width (NB): 600 mm 735 with barings belt width (GB): 500 mm overall height (BH): 85 mm motor height (MH): 110 mm Motor type: Van der Graaf drum motor Motor power: kW 0.25 230/400 V 50Hz Conveying speed: 1,25 m/s Scope of delivery: without supports (if required, please ask) Optional: Supports with dempers Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. ...
Year: 2017 - technically efficient, ready to work - after full service - processing of 2 profiles - support table
Gear motor, electric motor -Speed: 150 rpm -Power: 0.135 kW -Construction: B14 -Shaft diameter: Ø 12 mm -Protection class: -Price: per piece -Number: 4x available -Dimensions: 270/110/H145 mm -Weight: 3.9 kg
adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.08 kW -Speed range: 150 rpm -Construction: B14 -Diameter shaft: 12 mm -Price: per piece -Number: 2x available -Dimensions: 270/110/H145 mm -Weight: 3.9 kg
Gear motor, electric motor -Speed: 568 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 -Dimensions: 260/160/H130 mm -Weight: 5.9 kg
Gear motor, electric motor -Speed: 150 rpm -Power: 0.06 kW -Construction: B3 angle -Diameter hollow shaft: Ø 14 mm -Protection class: IP 54 -Dimensions: 285/120/H165 mm -Weight: 4.1 kg
Taurus 60 Turbine Generator Set Solar Taurus 60 T7301 Gas Turbine Engine Runnig hour 1165 hour after last Overhaul Output Power 5200 Kw Gearbox Solar Gear Unit 1165 hour after last Overhaul Type: Epicyclic Leroy Somer Generator 50 Hz
Gear motor, electric motor -Speed: 8.5 rpm -Power: approx. 0.18 kW -Construction: B3 -Diameter shaft: Ø 40 mm -Protection class: -Dimensions: 565/255/H255 mm -Weight: 44 kg
geared motor, electric motor -Speed: 68 rpm -Power: 0.18 kW -Design: B3 -Shaft diameter: Ø 24 mm Protection rating: Quantity: 1 piece available -Dimensions: 350/175/H190 mm -Weight: 14 kg
Gear motor, electric motor, three-phase motor -Speed: 84 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 33/E -Dimensions: 350/170/H180 mm -Weight: 16.2 kg
Offer 23443 Specifications: - max. working width 1250 mm - max. cutting capacity St 40 3 mm - Cutting angle 2.30° - Cutting gap adjustment by hand - Projection 200 mm - Man.- Back gauge 10 - 500 mm - Drive 400 V / 2.2 kW - Table height approx. 800 mm - Space requirements incl. back gauge -ca. W 1850 x H 1200 x D 1450 mm - Weight approx. 1700 kg
Gear motor, electric motor -Speed: 25 rpm -Power: 0.065 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Dimensions: 405/210/H200 mm -Weight: 17.2 kg
Gear motor, electric motor -Speed: 125 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 22 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 365/160/H200 mm -Weight: 12.8 kg
Gear motor, electric motor, electric gear motor -Speed: 32.5 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 33 -Dimensions: 440/210/H180 mm -Weight: 20.7 kg
SBF grading machine model 3W-586 1100mm with 3 belts: - 1st roller belt D=150mm in 90 shore rubber - 2nd roller belt D=200mm in 65 shore rubber - 3rd roller belt D=200mm in 45 shore rubber - pneumatic on/off of the 3 rollers, from the control panel - Rubber pressure rollers - automatic table positioner, with digital reader - Feed mat in good condition - 2 belt feed speeds - front and rear roller conveyor - total installed power KW 24 , volt 380 - year 1997 , CE standards AVAILABILITY FROM APRIL 2024
Gear motor, angular gear motor, electric motor, electric gear motor -Motor power: 0.37 kW -Speed: 106 rpm -Shaft diameter: 30 mm -Construction: B3 -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 450/210/H200 mm -Weight: 23 kg
Used Rheinhardt Technik Conti Flow Vario 2K for bonding and sealing dosing system !
CAT C32 marine propulsion engines 2 unit available Running hours: 42117 and 43446 In good condition
Gear motor, electric motor -Speed: 32.5 rpm -Power: 0.37 kW -Brake: 415 V -Construction: B5 angle -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Dimensions: 465/195/H150 mm -Weight: 17.7 kg
Key data: 3645
Wartsila 9R32LN generator 1 unit available Year:2005 60 Hz 3645 Kw at 720 RPM
max. ram stroke: 2 - 300 mm groove width: 2 - 32 mm power capacity: 8 kW no. of strokes: 2 - 300 Hub/min throat: ca. 300 mm Max. installation height: ca. 450 mm automatic feeds: 0,01 - 0,15 mm work speed: 0 - 30 m/min return speed: 30 m/min weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2,5 x 1,5 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gear motor, electric motor -Speed: 20/40 rpm -Power: 0.18/0.25 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Length: 253 mm -Protection class: IP 33 -Number: 3x motors available -Price: per piece -Dimensions: 610/200/H175 mm -Weight: 15.4 kg
AVAILABLE COMPLETE CHP JANBACHER 616 - Yeard 2010 With 2500kva transformer Exchanger - CHP - PANEL - complete .
Equipment: Precision Six-Jaw Chuck 1. Cylindrical grinding device Partial Setup Coolant system Instruction manual
Gear motor, electric motor, three-phase motor -Speed: 90 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 54 -Dimensions: 305/195/H150 mm -Weight: 10.8 kg
Gear motor, electric motor -Speed: 31.5 rpm -Power: 0.25 kW -Construction: B5 angle -Brake: 415 V -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Number: 1x motors available -Price: per piece -Dimensions: 445/190/H140 mm -Weight: 16 kg
Protective cover for milling curved parts on the ring etc. This protection device is often recommended by the BG. Maximum milling cutter diameter 160mm With thrust ring, brushes and brake wedge for the inrun bearing Obviously hasn't been used much so far. Year of construction unknown The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".
Gear motor, electric motor -Speed: 125 rpm -Power: 0.55 kW -Construction: B3 -Shaft: Ø 25 mm -Protection class: IP 44 -Dimensions: 525/200/H160 mm -Weight: 20.7 kg
geared motor, electric motor -Speed: 70 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: Ø 25 mm -Wave height: 80 mm -Protection class: IP 44 -Dimensions: 445/205/H160 mm -Weight: 18.1 kg
Grapes, fruit and berry press -Juice and pomace tub on sliding table, (pomace tub with auger, juice tub with pump and control) -Central filling as well as fixed cleaning line -New Prestuch in 2022 -New drainage hoses, stockings in 2021 -New lid seals in 2022 -Various electrical components in control renewed 2021 -Matching pre-juicer to go with it.
Gear motor, electric motor, electric gear motor -Speed: 20 rpm -Power: 0.18 kW -Construction: B3 angle -Diameter shaft: 16 mm -Protection class: IP 33 -Dimensions: 235/185/H120 mm -Weight: 4.9 kg
Gear motor, electric motor -Speed: 120 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 370/215/H170 mm -Weight: 13.1 kg
Gear motor, electric motor, electric gear motor -Speed: 24/48 rpm -Power: 0.15/0.2 kW -Construction: B3 -Diameter shaft: 20 mm -Protection class: IP 54 -Dimensions: 335/170/H180 mm -Weight: 12.1 kg
Gear motor, electric motor, electric gear motor -Speed: 108 rpm -Power: 0.25 kW -Diameter shaft: Ø 16 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 3x available -Dimensions: 305/195/H155 mm -Weight: 10.7 kg
ORMA disc gluing and screwing machine according to CE standards 4-roll gluing machine model I/413 with: - Working width 1300mm - Useful working height 100mm - double motorization, kw 0.75+0.75 - coating rollers D=250mm - dosing rollers D=180mm - with automatic brush washer Disc route with: - Useful working dimensions 3000x1300mm - Mechanical variable speed drive - with final photocells Year 2007, machines according to CE standards.
Gear motor, electric motor -Speed: 290 rpm -Power: 0.37 kW -Construction: B5 angle -Diameter shaft: Ø 14 mm -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 330/200/H180 mm -Weight: 8.5 kg
Long belt sander Hunziker (Ref. No. 517-2697) Format: 2.5 x 1.2 m L x W x H: 5.0 x 2.0 x 1.7 m Weight approx. 480 kg The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12
Gear motor, electric motor -Speed: 18.4 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Dimensions: 360/175/H170 mm -Weight: 13.1 kg
Gear motor, electric motor -Speed: 13 rpm -Power: 0.11 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 33 -Number: 1x geared motors available -Price: per piece -Dimensions: 380/170/H180 mm -Weight: 17.5 kg
Gear motor, electric motor, three-phase motor -Speeds: 119 rpm -Power: 0.12 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: -Dimensions: 340/180/H170 mm -Weight: 11.6 kg
Caterpillar 3516 diesel genset Year of manufacture 2007 1520 Kw 60 Hz at 1200 PRM
Gear motor, electric motor, three-phase motor -Speed: 153 rpm -Power: 0.18 kW -Voltage: 220 V -Construction: B3 angle -Shaft diameter: Ø 12 mm -Protection class: IP 44 -Number: 1x engine available -Price: per piece -Dimensions: 290/125/H180 mm -Weight: 5.7 kg
Gear motor, electric motor -Speed: 85 rpm -Power: 0.37 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 410/200/H205 mm -Weight: 17.4 kg
Perkin Elmer HS 40, Headspace sampler for 40 vials, max. temperature + 210 Celsius, min. +35 Celsius, fits all gas chromator graphs,
Gear motor, electric motor -Speed: 126 rpm -Power: 0.15 kW -Construction: B3 -Diameter shaft: Ø 16 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 300/190/H150 mm -Weight: 9.7 kg
maximum number of results exceeded
please refine your search
