husky g used for sale

SALMON SLICER-PORTIONER, GEBA TYPE: GPS 200 ASW Technical description: Serial number: 6000 204 Year: 2002 Power supply: 380/440 V - 50/60 Hz - 3 Ph Band width: 390 mm (plastic) Weight: 475 Kg Dimensions: 2750 x 1000 x 1490 mm The GPS 200 ASW is the Top Slicer. When the GP series was introduced in 2000 it caused a revolution. The industrial look initiated a new design- era at GEBA. With the new GPS 200 ASW we matched the challenge, to keep on perfektioning this extraordinary line of products, not only optically but also technically. Now you increase your yield and profit with computer-controlled adjustment (ASW) of the slice thickness and the cutting angle.

RÜHLE FROZEN BLOCK CUTTER, TYPE GFR 450 Technical description: Guillotine for cutting frozen meat and other types of frozen blocks such as frozen fish blocks, frozen blocks of vegetables and fruits to minus 20 degrees Celsius. The Ruhle guillotine achieves a capacity of up to 3000 kg/h and has also been adapted for inclusion in the technological line. The device has been equipped with 4 vertical cutting knives, which allows fine shredded cut block. A separate container for felling and very accurate feeding of the trolley to the finished product minimizes the loss of raw material. Maximum cut dimensions of the block: 450×250 (mm)

• Non-EX version • For coating and coating tablets using the film coating process • Drum fully perforated with mixing paddles Smooth SU 4.12, hole diam. 3 mm • Drum material AISI 316L • Drum usable volume 331 litres, drum Ø 1. 450 mm, opening diam. 550 mm • Batch size 79-265 kg (filling volume 30-100%, density 0.8 kg/dm3) • Spray nozzle Glatt GCSD 3.1 with multi-head peristaltic spray pump with pump trolley • Filling chute • SmartScoop discharge with discharge hopper • Supply air system Glatt M6/F9 with temperature and volume flow measurement • Supply air fan • Supply air filter 3. H13 • measuring device for DEHS filter test • Frost protection heating (steam) • Dehumidification 32°C/40% rH, independently controlled • Humidification with preheater • Electric pure steam generator Defensor Mk5 • Bypass shut-off damper during sugar coating • Exhaust air ...

pressure: 125 t chamfer lenght: 3550 mm distance between columns: 3050 mm stroke: 250 mm table width: 120 mm table height: 900 mm column arm: 320 mm return speed: 100 mm/sec working feed: 10 mm/sec control: Cybelec DNC 70 quantity of oil: ca. 250 l total power requirement: 11 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 4 x 2 x 3 m new control Cybelec CypTouch 12 - 3 axes Hydraulic tool clamp Crowning Swivel control, right front free-moving foot control lateral protective device (protective grille) rear protective device (protective grille) Machine is available in about 1-2 months The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Semi-automatic slicer / slicer GRAEF HA 800 / DEKC3 Technical data: 400 Volt / 50 Hz / 2.4 A / 500 W Knife diameter: 300 mm Stainless steel knife Incl. knife sharpener Machine with CERA 3 coating Machine weight: 59 kg Year of manufacture: 2018 Knife speed 229 rpm Feed rate 260 mm Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.

Aufschnittmaschine / Slicer GRAEF MASTER 3370 Technical data: 230 Volt / 50 Hz / 2.2 A / 450 W Cutting thickness adjustment: 0 to 24 mm Knife diameter: 330 mm Stainless steel knife, smooth Power current Machine with CERA 3 coating Weight: 43 kg Cutting size square: 300 x 224 mm Cutting size: Ø 190 mm External dimensions (L/W/H): 660 x 620 x 470 mm Installation area (L/W): 585 x 440 mm Carriage dimensions (L/W): 300 x 340 mm Knife speed: 229 rpm Noise level:

Fully automatic slicer / slicer GRAEF VA 800 / Art.Nr. VA804DE-C3 Technical data: 230 Volt / 50 Hz / 2.4 A / 500 W Knife diameter: 300 mm Stainless steel knife including grinder including underframe trestle Machine with CERA 3 coating Machine weight: 75 kg Year of manufacture: 2018 Knife speed 229 rpm Cutting thickness: 0.5 to 10 mm Stacking up to 4 stacking trays Longitudinal and transverse compartments, variable up to 4 rows, and round shelf Carriage designed for up to 40 cm of food to be cut Condition, see original pictures! If you have any questions, email or call.

Key data: 250 mm

Milling cutter diameter 250 mm Pneumatic workpiece clamps Manual feed weight: approx. 160 kg

A GSW decoiler is available. Load capacity: 3000kg, strip width: 650mm, max. strip cross-section: 107.5mm/0.35mm, machine dimensions Y/Z: approx. 1150mm/2000mm. An on-site inspection is possible.

sheet width: 2500 mm plate thickness: 4 mm weight of the machine ca.: 5.000 kg dimensions of the machine ca.: 3000 x 2000 x 1700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 100 mm turning length: 320 / 345 mm control: Siemens 840 D swing diameter: 145 mm spindle distance: 580 mm slide I:: slide I - cross travel: (X1) 220 mm slide I - longitudial travel: (Z1) 320 mm y-axis: +/- 30 mm rapid traverse: (X/Y/Z) 30/15/30 m/min slide II:: slide II - cross travel: (X2) 120 mm slide II - longitudial travel: (Z2) 345 mm rapid traverse: (X/Z) 30 m/min Subspindle:: Travel subspindle: (Z3) 380 mm vertical stroke: (X3) 145 mm bar material dia.: max. 36 mm rapid traverse: (X/Z) 20/30 m/min power capacity: (40/100 % ED) 26/21 kW spindle turning speed range: 40 - 7200 U/min total power requirement: 42 kVA weight of the machine ca.: 5,3 t dimensions of the machine ca.: m CNC turning and milling centre with Y-axis, 2 turrets, subspindle and bar feeder. A total of over 44,000 EUR has been invested in necessary repairs and maintenance over the last 5 years  ...

Highlights - CNC FANUC 32i - 6 linear axes - 2 programming channels - 2 electrospindles - C-axis standard for main spindle and sub-spindle - 25 Vehicle positions - 4 radial driven tools for slides 1 - 4 radial driven tools for slides 2 - Machining on the main spindle possible with 2 tools at the same time Technical description I-A1023 GILDEMEISTER SPRINT 20|8 CNC Swiss Automatic Lathe CNC CNC FANUC 32i TECHNICAL DATA MAIN SPINDLE Turning diameter max.: 20 mm Stroke Z1: 60 mm 180 (with option I-C1002) Max. speed: 10,000 rpm Nominal drive power S1: 2.2 kW SUB-SPINDLE Turning diameter max.: 20 mm Stroke X2: 220 mm Stroke Z2: 170 mm Max. speed: 10,000 rpm Nominal drive power S1: 1.5 kW CNC-CONTROLLED AXES Rapid traverse speed: 32 m/min Max. acceleration: 5 m/s2 Feed force (S1) axes Z1, Z2, X1, X2: 150 daN Feed force (S1) axis Y1: 370 daN Feed force  ...

Key data: 2790 KG, 3100 mm, 3750 mm

Hello, We hereby offer you a used pallet racking system (multi-station system) from Galler, type OMEGA. Manufacturer Galler Lager- u. Regaltechnik GmbH Type Omega Year of construction unknown Stand load max. 10,800 kg Load capacity/compartment max. 2,790 kg Stand height 3,750 mm Column depth 1000 mm Beam length (truss length) 3,100 and 3,400 mm Scope of delivery: 44 pieces stand 3,750 x 1,000 x 100 mm (H x D x W) 215 trusses 3,100 mm 14 trusses 3,400 mm 14 pieces of upright collision protection elements, long 985 x 120 x 55 mm (L x W x H) 10 pieces of upright collision protection elements, short 500 x 120 x 50 mm (L x W x H) 12 pieces ground bumper corner, green, 500 x 120 mm 13 pieces of ground bumper corner, yellow, 450 x 110 mm 1 piece ground bumper corner, yellow, 450 x 180 mm 2 pieces of uprights for double rows, plate 300 x 250 mm, stand height 350 mm 24 Piece ...

Highlights − Linear actuator for maximum precision, dynamics and cost-effectiveness − 6 + 2 axes, 2 Y-axes as standard − 2 tools in use at the same time − Thanks to the conversion kit, the machine can be used as an adjustable spindle stick Technical description I-J10010 GILDEMEISTER SPRINT 20|8 linear CNC Swiss Automatic Lathe TECHNICAL DATA: MAIN SPINDLE Turning diameter max.: 20 (25 option) mm Stroke Z 1: 80 mm Max. speed: 10,000 rpm Nominal drive power: S1 3.7 kW SUB-SPINDLE Turning diameter max.: 20 (25 option) mm Stroke Z 2: 300 mm Max. speed: 10,000 rpm Nominal drive power S1: 3.7 kW CNC-CONTROLLED AXES Rapid traverse speed: 40 (30) m/min (Y1 only) Acceleration max. X1: 10 m/s2 Feed force (S1) axis Z1,Z2,X2,Y2: 250 daN Feed force (S1) axis Y1: 500 daN Linear axis feed force X1: 60 daN SLIDE 1 Stroke X 1: 50 mm Stroke Y 1: 350 mm 6 P ...

Eppendorf Mastercycler Ep Gradient s Realplex 2 Thermal Cycler Thermal cycler model 5345 + 6300 EPgradient S Weight: 20 kg Voltage: 220V Dimensions 60×30×50 cm Without software

Sequential Analyzer - Global 240 BPC Biosed Colorimetric and enzymatic sequential analyzer for water, soil and wine analysis Equipment in average condition Untested Equipment With many accessories No computer or software

A large-format vacuum thermoforming machine Geiss with two window plates is available. Heating power: 360kW, connected load: 370kW, window plates: 2, min. window plate dimensions 1: 1360mm/860mm, max. window plate dimensions 1: 2460mm/1460mm, window plate adjustment 1 X/Y: 1100mm/600mm, min. window plate dimensions 2: 940mm/520mm, max. window plate dimensions 2: 2400mm/1400mm, window plate adjustment 2 X/Y: 1460mm/880mm, materials: PS/ABS/TPU/PMMA. Total system dimensions X/Y/Z: approx. 9150mm/2350mm/4000mm, total weight: approx. 15500kg, control: Siemens Simatic Panel PC, operating hours (April 2026): approx. 20100h. Documentation available. An on-site inspection is possible. Without vacuum pump, spare parts and temperature control unit. Expected to be available from October 2026.

max. wheel diameter: 406,4 mm gear width: 66 mm max. module: ca. 12,5 min. module: Control: Zyklengesteuert total power requirement: 21 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: 3,3 x 2,5 m The GLEASON 641 G-PLETE bevel gear generating machine is a proven and robust solution for the production of spiral bevel gears, hypoid gears, and Zerol bevel gears usingthe well-established Gleason generating method. Designed for reliable and repeatable machining processes, this machine is ideally suited for small to medium batch production in industrial gear manufacturing. The 641 supports both roughing and finishing operations in a single setup (completing process), ensuring consistent gear quality while reducing handling time. Its mechanical generating system with variable roll ratio and plunge feedmechanism allows precise control of the tooth geometry, making it a depend ...

Cream separator (Skimmer). Self cleaning. Machine comes with the bowl, motor (18,5 kW), water valves (original Westfalia), all inlet/outlet pipes, service tools for maintenance and a several spare parts., Additional features:, Excluding:, - Base plate and feet., - Motor cover., - Control panel., Type of Machine: Cream Separator / Skimmer, Capacity: 10.000 liter per hour, Bowl speed: 5.920 rpm, Motor: 18,5 kW - 230/460 V - 60 Hz - 1.770 rpm - 59 / 29,5 A , Dimensions: 190 x 105 x 190 cm, Weight: 1.800 kg

An optical inspection machine Göpel for the inspection of THT components, THT solder joints and wave-soldered SMD components is available. Component clearance: 120mm, max. component height top/bottom: 80mm/10mm, max. inspection dimensions X/Y: 540mm/450mm, max. workpiece dimensions X/Y: 620mm/510mm, inspection speed: approx. 100cm²/s, machine dimensions X/Y/Z: approx. 1200mm/1400mm/1800mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible.

sheet width: 1250 mm plate thickness: 1,5 mm distance between columns: 1300 mm daylight opening: 80 mm : 155 ° total power requirement: Handbetrieben weight of the machine ca.: 0,18 t dimensions of the machine ca.: 1,4 x 0,8 x 1,3 m Segment-bending machine Segment widths: 2x50mm,1x70mm,2x75mm, 2x100mm,4x150mm, 1x170m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU327X692 LocationBarneveld CEcheck MakeQVF Glasstechnik Main Features MaterialGlass Volume150 Ltr. Specified Features - Vertical tank Closed vertical tankcheck Capacity150 l. Vessel sizesø 450 x 1300 mm Dished topcheck Dished bottomcheck Top connectionscheck Outletcheck MaterialBorosilicate Glass 3.3 Information Type150 l No.VZN 150/450 Mounted on legscheck on frame Floorspace0,80 x 0,70 m Weight400 kgVertical tanksQVF GlasstechnikTanks > Vertical tanksBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Please visit our at Foeth[dot]com for more information about this machine. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Please visit our at Foeth[dot]com for more information about this machine. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Height=2.08 m, Overall length= 2.05 m, Overall width= 1.35 m, Net weight= 421 kg,

Height=1.36 m, Overall length= 1.71 m, Overall width= 1.02 m, Net weight= 757 kg,

Range : ø 20-75 mm (SDR 11 & 13.6) Core diameter : 760-1600 mm Width : 140-500 mm Outer diameter max. : 2700 mm Remark : Incl. cutter, binding unit, ejector

Range : ø 10-40 mm plain pipe; or 40-110 mm corrugated pipe, 20 m/min max. Remark : ID 450-600mm; OD 1200mm Max Width 100-400mm

Key data: 4400 mm, 75 mm

TECHNICAL DATA: Cutting length: 4400 mm Slide stroke: 4300 mm Saw blade protrusion: 90 mm Usable cutting height: 75 mm Saw blade: Ø 330 mm Equipped with scorer: 1.25 kW Main motor: 7.5 hp Control: GVision 2009 06 Collets Collet opening: 115 mm EQUIPPED WITH: 04 Air curtain tables (AIR flow) 01 Fan

Three-knife trimmer for ShortRun and SingleCopy Softcover products and Hardcover book blocks. The ShortRun D.09 Three-knife trimmer has extreme short change over time and no make-ready parts. Products are trimmed in two separate cutting stations, head and tail trim first and then face trim in the second station. Untrimmed : 325 x 430 mm - 92 x 122 mm Trimmed : 300 x 420 mm - 90 x 120 mm Thickness : 60 mm - 2 mm Head trim : 2 - 25 mm Foot trim : 2 - 25 mm Face trim : 2 - 25 mm Speed : up to 2,400 cycles/hour (in short run mode) - up to 1,200 cycles/hour (in single copy mode)

General SKU397X1140 MakeGab Neumann LocationBarneveld CEcheck Type22 l. Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Tube capacity22 l. Max. temperature-30°C/+180°C Shell capacity13 l. Shell diameter400 mm Shell length1090 mm Max. temperature-30°C/+180°C Shell connectionsDia. 125 mm Cover connectionsDia. 25 and 50 mm Information No.28123-21620 Year of construction2010 Weight355 kgShell and tube heat exchangersNew arrivalsGab NeumannHeat exchangers > Shell and tube heat exchangersNew arrivalsBrand > Gab Neumann What you can expect from Foeth: -- Machine is in working c ...

Unit 1 - Geiss CNC FZ 2800 x 1000 - Year of Manufacture: 2013 - Total Weight: 42.05 kN - Voltage: 400V, 3-phase + N, 50Hz - Connected Load: 25.62 kW - Rated Current: 37 Amp - Certification: CE Unit 2 - Geiss CNC FZ 2000 x 1000 - Year of Manufacture: 2012 - Total Weight: 30.22 kN - Voltage: 400V, 3-phase + N, 50Hz - Connected Load: 24.72 kW - Rated Current: 36 Amp - Certification: CE Find more here - / Contact us at -

1.Model : GTM-29 2.Maximum Capacity : Approx. 4600pcs/Hour 3.Dimensions Approx. 2.0m O/D x 1.5m O/H 4. Designed for operate 24 hours 5. c/w UPS for Computer TG Medical Sdn Bhd, F3 If interested, kindly contact Mohna 012 3555489 (mohnambikai@topglove.com) or Ms Arina (arina@topglove.com.my)

Two Geiss CNC machining centers are available. 1) Geiss FZ 2000x1000, year of manufacture: 2012, travel path X/Y/Z: 2450mm/1400mm/800mm, B-axis: 285°, C-axis: 520°, speed: 30000rpm, table dimensions X/Y: 2000mm/1000mm, machine dimensions Y/Z: 2500mm/2450mm, weight: approx. 30500kg. 2) Geiss FZ 2800x1000, year of manufacture: 2013, table dimensions X/Y: 2800mm/2000mm, weight: approx. 42000kg. The Geiss machine with the year of manufacture 2013 has spindle problems. A cost estimate is available for this. The repair can be carried out before the sale or by the buyer. Documentation available. An on-site inspection is possible. Individual sale possible.

1.Model : GTM-29 2.Maximum Capacity : Approx. 4600pcs/Hour 3.Dimensions Approx. 2.0m O/D x 1.5m O/H 4. Designed for operate 24 hours 5. c/w UPS for Computer TG MEDICAL SDN BHD, F3 If interested, kindly contact Mohna 012 3555489 (mohnambikai@topglove.com) or Ms Arina (arina@topglove.com.my)

CNC Lathe Manufacturer: Gildemeister Type twin 42 Year of manufacture 2005 Control Siemens 840D Turning length 210mm 2 X 12-fold turret all places are powered Engine A 83700 Spindle A 50809 Machine has a defect in the pick-up spindle, probably bearing With Breuning Profimat bar loading magazine

Automatic lathe Genini ROTOUR 100 CE Max working length 300 mm Max turning diameter round Ø 140 mm, square 100×100 mm 15hp spindle motor Shank Speed 2050-2800-4100-5600rpm 3HP Pump Motor 0.5hp grinder motor CE mark

Technical specifications, · Crusher: Jaw crusher with an inlet opening of approx. 1,100 × 750 mm (in some variants 1,100 × 800 mm), · Performance: Depending on material and settings, the plant achieves a capacity of up to 400 t/h, · Weight: The transport weight is 44.2 t, · Dimensions: Transport length approx. 14.24 m, width approx. 3.00 m, height approx. 3.35 m, · Antrieb: CAT / 179 kW diesel-hydraulic system with load sensing to save fuel, · Year of construction: 1996, · Operating hours: 12,000 h, · Year of construction: 1996, · Operating hours: 12.000 h

Package Overview Manufacturer: Tracto Models: Grundodrill 18ACS and Grundodrill 15XPT T5 TD73 Year of Manufacture: 2022 Unit 1 — Grundodrill 18ACS - Year of Manufacture: 2022 - Operating Hours: 1,484 - Engine: 123 kW Stage 5 drive motor for travel and drilling - Pulling and Pushing Force: 180 kN - Torque: 7,500 Nm - Undercarriage: Rubber-padded steel track - Cab: Full cab, swivelling, with heating, radio, and air conditioning - Drilling Data: Onboard documentation to DVGW GW 321 - Drilling Mode: Fully automatic - Remote Control: Radio remote control for travel operation - Bentonite Pump: 320 l/min onboard HD pump - Telemetry: Drill data transmission - Anchoring System: With bentonite collection tray - Rod Changing System: Hydraulic clamping and release unit Unit 1 — Measuring Technology - DigiTrak Falcon F5+ System with AF8 Display, DigiTrak Sender FT2, V2 15 inch (F2/F5), Lit ...

bore capacity in steel (diameter): 32 mm throat: 310 mm bore stroke: 175 mm spindle taper MT: MK3 table-size: 570 x 475 mm spindle turning speed - stepless: 60 - 1600 U/min voltage: 400 V column diameter: Ø145 mm quill feed: 0,1-0,16-0,25 mm/U total power requirement: 1,1/1,8 kW weight of the machine ca.: 450 kg dimensions of the machine ca.: 0,70 x 1,10 x 2,10 m - Serial-No.: 121950 - Stepless speed control - Automatic vertical feed - Built-in machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 30 mm, 30 mm, 80 mm

Flat steel shears - Flat steel 2° inclination 300 x 10 mm - Flat steel 5° inclination 200 x 13 mm - Knife length 305 mm Profile steel shears - L-profile at 90° 80 x 80 x 8 mm - L-profile at 45° 60 x 60 x 6 mm - Round steelØ 30 mm - Square steel 30 mm 3-point notching station - Flat steel 7mm - Notching depth 50mm - Notching width 40mm Punching station - Punching capacity 450 kN - Material thicknessØ 27 x 13 mm - Projection 175 mm incl. electric stop

Stamping capacity 550 kN and 280 kN Projection 130 mm or 250 mm

Key data: 230 mm

suitable for mitre cuts on one side Cutting area at 90° round 230 mm, flat 280x150 mm at 60° round 133 mm, flat 130x90 mm Cutting speed 40 + 80 m/min incl. Hydraulic material feed Chip clearing brush, coolant device, roller conveyor piece

A conveyor belt with a cooling tunnel is being sold. Metal chain links. Bj 2022 Width approx. 35cm Band length approx. 235cm Machine dimensions approx. L 265cm W 95cm Price is net VAT Machine can and should be tested on site, as warranty or guarantee is excluded. Loading facilities available Article location Nuremberg

Inv. Num. : 9065 Type: GLS 200 Producer: GOODWAY Created: 2016 Parameters: Control System: FANUC Series Oi-TF Switch-on hours: 15380 h Hours: 7757 h Max. turning length: 300 mm Grinding diameter: 350 mm Maximum turning diameter over bed: 500 mm Maximum turning diameter over support: 380 mm Maximum spindle speed: 4500 1/min Spindle passage: 65 mm Number of tool head positions: 12 Weight: 3200 kg Equipment: Chuck Tool probe Bar Feeder Grips

Terlet Terlotherm T0-4 Scraped Surface Heat Exchangers (SSHE) for inline heating and / or cooling of liquid, viscous and high viscous products with or without whole parts (up to 25 mm), like starch preparations, soups, sauces, dairy products etc. Scrapers can be easily replaced. CIP Cleanable. Inspection without removing seal. Lid can be opened with clamps. Large heating area on limited floor area. Tangetiale inlet. Accelaration and deceleration area. No damage to the product. Maintenance friendly, only one seal and one drive. Product volume: 32 liter. Number of scraper rows: 4. Inner vessel: 0 / 10 Bar - 0 / 150 °C - 32 liter. Jacket #1: -1 / 4 Bar - 0 / 150 °C - 2,6 liter. Jacket #2: -1 / 4 Bar - 0 / 150 °C - 4,6 liter. Motor: 3 kW - n1: 1.456 rpm - i: 43,33 - n2: 34 rpm - 380/400 V - 50 Hz - 6,60 / 3,85 A. Product inlet: 50 mm. Product outlet: 50 mm. Ground clearance: ± 556 mm. Cy ...

This APV Gaulin 145 MC 4-8TPS homogeniser is a 3-cylinder machine which is designed for 550 liter per hour with a maximum pressure of 550 bar. The homogensier is equipped with 2-stages with puppet valve cylinder, 1 stage hydraulic controlled, 1 stage manual controlled. Manometer (max 400 bar). Motor: 15 kW - 380 V - 29,6 Amp - 50 Hz - 1.440 rpm. Oil pumping system inside the machine. Stainless steel cladded., Type of Machine: Homogeniser, Capacity: 550 liter per hour, Stages: 2 Stages, Max. Pressure: 550 bar, Valve cylinder: Puppet valves, Product: Food industry, Piston diameter: 20 mm, Motor: 15 kW - 380 V - 29,6 Amp - 50 Hz - 1.440 rpm, Dimensions: 100 x 70 x 145 cm, Weight: 800 kg

Lamina Gluer, Typ: 1800 GL/WS, Year: 2015, Nordson Gluesystem with 3 x Guns

Screw conveyor to collect from mixer and convey to big bag filling station, 1,5 kw motor, mounted on 2 fixed+2 pivoting wheels, adjustable discharging height 260-280 mm from ground, loading height 700 mm from ground, Used machine, reconditioned, installed power - used power in work: about 60-65% : 1,5 kw

Big Bag, 1-place holding structure, complete with supporting hooks, Constructed in solid, painted carbon steel, single place, Machine reconditioned