hub used for sale

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 50 mm -Piston rod: Ø 22 mm -Diameter eyes: 30 mm -Piston rod thread: M18 x 1.5 -Stroke: 200mm -Quantity: 1x available -Price per piece -Dimensions: 445/90/H80 mm -Weight: 6.7kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Pneumatic cylinder: double-acting, stroke 50 mm -Piston: Ø mm -Piston rod: Ø 12 mm -Number: 2x cylinders available -Price per piece -Dimensions: 115/45/H75 mm -Weight: 0.4 kg/piece

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Jaw coupling PAGUS Ø 140 mm coupling bell: Ø 140 mm, length: 56 mm shaft diameter: Ø 30 mm, shaft length: 56 mm groove width: 8 mm hub diameter: Ø 65 mm, hub length: 13 mm drive disc: Ø 140 mm, length: 83 mm shaft diameter: Ø 30 mm, shaft length: 55 mm groove width: 8 mm hub diameter: Ø 65 mm, hub length: 41 mm New ! Dimensions( total ): Ø 140 x 112 mm

Jaw coupling PAGUS Ø 140 mm coupling bell: Ø 140 mm, length: 56 mm shaft diameter: Ø 30 mm, shaft length: 56 mm groove width: 8 mm hub diameter: Ø 65 mm, hub length: 13 mm drive disc: Ø 140 mm, length: 83 mm without shaft bore ! hub diameter: Ø 65 mm, hub length. 41 mm New ! Dimensions( total ): Ø 140 x 112 mm

Jaw coupling PAGUS Ø 140 mm coupling bell: Ø 125 mm, length: 52 mm shaft diameter: Ø 25 mm, shaft length: 52 mm groove width: 8 mm hub diameter: Ø 60 mm, hub length: 12 mm drive disc: Ø 125 mm, length: 75 mm shaft diameter: Ø 25 mm, shaft length: 52 mm groove width: 8 mm hub diameter: Ø 60 mm, hub length: 38 mm New ! Dimensions( total ): Ø 125 x 101 mm

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Universal Cylindrical Grinding Machine MSO FFM-U 130/1000 manufacturer: MSO type: FFM-U 130/1000 mach.-Nr.: 16219Mv12438 year of construction: ? comm.-Nr.: 3990505/009 stock-nr.: 1841 + Regular Price: 4.750,- € > Reduced Price: 2.375,- € BN + All prices are shown without taxes (net price) The machine can be used for: outer grinding surface grinding cone grinding Technical Data (According to manufacturer) centre height: 130 mm swing-Ø: 260 mm grinding length: 1000 mm between centres: 1050 mm grinding wheel diameter: 300 mm bore-Ø: 127 mm largest width of grinding wheel for plunge grinding: 40 mm largest total width of a grinding wh ...

pressure: 75 t throat: 300 mm stroke: 8 - 110 mm table surface area: 750 x 600 mm ram adjustment: 75 mm ram surface: 430 x 230 mm hole in the table: 250 x 150 mm tool hole in ram: 40 mm no. of strokes: 60 + 90 Hub/min weight of the machine ca.: 4,4 t total power requirement: 4,5 - 6,8 kW dimensions of the machine ca.: 1,95 x 1,1 x 2,35 m distance table/ram: Hub unten, Stöß. unten 19 mm distance table/ram: Hub oben, Stöß. oben 380 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Curved tooth coupling, coupling KTR Kupplungstechnik BoWex M-14 1x hub for shaft diameter: Ø 10 mm, groove width: 3 mm 1x® hub for shaft diameter: Ø 14 mm, groove width: 5 mm hub diameter: Ø 25 mm, length: 12 mm sleeve color: white 2x locking screw: M5 Material: steel Coupling diameter: Ø 40 mm Coupling length: 50 mm New ! Dimensions: 50 x 40 x 40 mm

Steel multi-plate clutch, clutch PAGUS Ø 36 x 66 mm 1x Hub for shaft diameter: Ø 6 mm 1x Hub for shaft diameter: Ø 10 mm Hub diameter: Ø 22 mm, length: 15 mm 2x locking screw: M4 Material: Aluminium, spring steel Coupling diameter: Ø 36 mm Coupling length: 66 mm New ! Dimensions: 66 x 36 x 36 mm

Gear set, spur gear, with hub, 2 pieces PAGUS Module 3 Teeth: 30 Diameter: Ø 96 mm tooth spacing: 9,, 42 mm ( Module 3 ) Tooth depth: 6 mm Tooth width: 25 mm Angle of engagement: 20 ° shaft diameter: Ø 25 mm Wavelength: 45 mm Hub diameter: Ø 50 mm Hub length: 20 mm New ! Dimensions ( one gear ): 96 x 96 x 45 mm Dimensions ( packaging ): 200 x 100 x 50 mm

Gear set, spur gear, with hub, 3 pieces PAGUS Module 3 Teeth: 30 diameter: Ø 96 mm tooth spacing: 9,, 42 mm (module 3 ) Tooth depth: 6 mm Tooth width: 25 mm Angle of engagement: 20 ° shaft diameter: Ø 25 mm Wavelength: 45 mm Hub diameter: Ø 50 mm Hub length: 20 mm Material: PP Other quantities on request ! New ! Dimensions ( one gear ): 96 x 96 x 45 mm Dimensions ( packaging ): 100 x 100 x 140 mm

Gear set, spur gear, with hub, 2 pieces PAGUS WU50d229 module 2 teeth: 21 helical toothed, left-handed diameter: Ø 47,5 mm tooth spacing: 6.28 mm ( module 2 ) tooth depth: 4.5 mm tooth width: 16 mm for shaft diameter: Ø 25 mm Shaft length: 28 mm, groove width: 5 mm Hub diameter: Ø 26 mm Hub length: 12 mm New ! Dimensions ( one gear ): 48 x 48 x 28 mm Dimensions ( packaging ): 50 x 50 x 60 mm

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Hydr. Universal Cylindrical Grinding Machine WMW SU 240×800 manufacturer: WMW SU 240×800 build type: Reinecker type: SU 240×800 mach.-nr.: 02910 year of construction: ? comm.-nr.: 3990699/009 stock-nr.: 1865 + Regular Price: 5.800,- € > Reduced Price: 2.900,- € BN + All prices are shown without taxes (net price) The machine can be used for: outer grinding surface grinding cone grinding edge grinding chamfering plunge grinding Technical Data (According to manufacturer) height of tip: 120 mm swing – Ø: 240 mm width of tip: 800 mm grinding wheel: diameter: 300 mm bore diameter: 76 mm max. width of full grinding wheel during ...

- max. Werkstückhöhe 200 mm - 4 Spannzylinder für Werkstückspannung, paarweise zuschaltbar - Tischabmessung links L =500 mm, B=400 mm - Tischabmessung rechts L =500 mm, B=400 mm - Hub rechter Tisch 40 mm - Hub Zylinder 80 mm - Pneumatikanschluss 8 bar - Gradeinstellung 0C, 22,5, 33C - Fußpedal zum Spannen und Lösen - CE-Ausführung - Abmessungen L=1160, B=500, H=1200 mm - Gewicht 150 kg

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Hydr. hacksaw Kasto EBS 320 U manufacturer: Kasto type: EBS 320 U mach.-Nr.: 273463 year of construction: ? comm.-Nr.: 3990297/509 stock-Nr.: 1836 + Regular Price: 3.650,- € > Reduced Price: 1.825,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) sawing area: Ø 320 mm oder 320 x 300 mm saw blade dimensions: 575 x 45 x 2,5 mm 4 hub speeds: 40 / 57 / 80 / 115 hubs/min. drive power: 3,5 kW weight: ca. 750 kg standing area: B 1,80 x T 0,80 x H 1,10 m machine color: grauweiß / rot Features 4 hub speeds cutting pressure infinitely adjustable closed hydraulic system liquid cooling system ki ...

Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...

The new 19-inch Rack PC SIMATIC IPC847C is equipped with the latest 2010 Intel Core processor technology (Intel Core i). The high computing power and PCI-Express technology make the IPC847C the perfect platform for high-performance applications, such as in measurement technology in test benches or in industrial image processing. The SIMATIC IPC847C also offers maximum system availability, expandability and compactness in 19" IPC technology: - optimal storage space utilization and data security with RAID5 - optional redundant power supply (AC) - Extensive diagnostic and monitoring options - Universal use for industrial workstation and server applications - Variety of integrated interfaces and expansion slots - Lower installation depth for installation in space-saving control cabinets of only 500mm depth The Rack PC is available as a control cabinet device for horizontal and ver ...

DH Robotics PGC-140 Gripper Weight: 1000 g Payload: 3000 g With a stroke of 50 mm and a payload of 3 kg, the DH Robotics PGC-140 is designed to combine intuitive design with practicality. With its impressive accuracy, self-locking, and a host of other features, the PGC-140 is the perfect gripper for lightweight collaborative applications. The PGC-140 is easy to set up and comes with plug-ins for most major robot brands such as Universal Robots, OMRON, etc. Properties The DH Robotics PGC-140 is an electric two-finger gripper designed for both industrial and collaborative applications. The award-winning PGC-140 gripper (Red Dot Award, IF Award) combines progressive design with proven reliability. The PGC-50 offers a stroke of 50 mm and a recommended payload of 3 kg. The DH Robotics PGC-140 is an ideal companion for your cobot with its self-locking function, maximum force li ...

max. wheel diameter: 1600 mm gear width: 457 mm max. module: 12,5 min. module: 2 spindle bore: 222 mm stroke: 15-120 Hub/min roll feed: 0.3 - 0.84 mm/min down feeds: mm/Hub electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 10 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 3,5 x 3,3 x 2,5 m EXTERNAL GEARS: Blank diameter:- Max 63 1600 mm Min 0 0 Face width, double helical 0 - 18 0 - 457 mm Face width, spur or single helical 0 - 10 0 - 254 mm INTERNAL GEARS: Blank diameter:- Max 66 1676 mm Face width 0 - 8 0 - 203 mm P.C.D.:- Max 66- (2 x rim thickness) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 250 mm stroke: 5/95 mm table surface area: 805 x 510 mm distance table/ram: Hub unten - 400 mm tool hole in ram: 45 mm ram adjustment: 100 mm ram surface: 360 x 300 mm no. of strokes: 55 Hub/min total power requirement: 5,5 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 0,83 x 1,7 x 2,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 900 mm grinding width: 510 mm workpiece height: 400 mm table surface area: 800 x 400 mm longitudinal feed of the table: max. 980 mm table speed -stepless-: 1 - 35 m/min grinding wheel size: 355 x 51 x 127 mm cross feed of the table: 460 mm cross feed: 1 - 40 mm/Hub vertical feed autom.: 0,005 - 0,04 mm/Hub rapid traverse vertical: 0,5 m/min grinding spindle speed: 1450 U/min grinding spindle drive: 5,6 kW table load capacity: max. 1000 kg total power requirement: 10 kW weight of the machine ca.: 4,4 t Accessories: magnetic plate 800 x 400 mm, various grinding wheels with and without flanges, wet grinding attachment with paper band filter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Linear actuator REXROTH LA 25 HUB 600 ( LA25HUB600 ) 7900304779 Hub: 600 0 mm carriage: 124 x 85 x 85 mm hole spacing 1: 70 / 170 mm, hole spacing 2: 70 / 105 mm all threaded hole: M6 x 1,0, Depth: 15 mm Track: 64 x 54 mm, Length: 780 mm used, tested ! Dimensions: 900 x 85 x 120 mm

Solid rubber wheel, with rim, 5 pieces PAGUS -? 2x 630 - 220 - 480 outer diameter: Ø 630 mm rim diameter: Ø 480 mm, rim width: 220 mm support width: 190 mm hub diameter: max. 220 mm bolt circle diameter: Ø 275 mm, 8x bore: Ø 27,5 mm 3x 630 - 200 - 480 outer diameter: Ø 630 mm rim diameter: Ø 480 mm, rim width: 200 mm support width: 170 mm hub diameter: max. 164 mm bolt circle diameter: Ø 205 mm, 6x bore: Ø 20.5 mm Material: steel ( rim ), rubber ( tire ) used, tested ! Dimensions ( transport, with pallet ) : 1200 x 800 x 800 mm

Torsionally flexible claw coupling, elastomer coupling, claw coupling JAKOB EKM 60 shaft diameter: Ø 15 / 24 mm 2x divided e Clamping hub Clamping hub diameter: Ø 60 mm, thickness: 22 mm Material: aluminum, elastomer (sprocket ) Coupling diameter: Ø 60 mm New Dimensions( single coupling ): 61 x 60 x 60 mm Dimensions( packaging ): 80 x 72 x 70 mm

Semiflex coupling, torsionally stiff and restoring force-free precision coupling SCHMIDT-KUPPLUNG GmbH Art.Nr. 16861 Shaft diameter: Ø 36 / 38 mm groove width: 10 mm 2x split clamping hub with keyway Clamp hub diameter: Ø 90 mm, thickness: 27.5 mm New ! Dimensions: 104 x 95 x 95 mm

Steel multi-plate clutch, clutch PAGUS Ø 30 x 30 mm 2x hub for shaft diameter: Ø 6 mm hub diameter: Ø 30 mm, length: 5 mm Material: aluminum, spring steel Coupling diameter: Ø 36 mm New ! Dimensions: 66 x 36 x 36 mm

pressure: 100 t throat: 350 mm stroke: 20 - 120 mm table size: 1100 x 700 mm ram head dimension: 750 x 450 mm ram adjustment: max. 90 mm no. of strokes: 70 Hub/min strokes - infinitely variable: 20 - 120 Hub/min daylight, max. stroke above - ram adjustment above: 500 mm hole in the table: 400 x 300 mm hole in bolster plate: 220 x 180 mm Breakthrough in column back: 450 x 300 mm total power requirement: 11 kW weight of the machine ca.: 11,8 t dimensions of the machine ca.: 2,1 x 1,3 x 2,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Coupling device WMW EK IH Connection coupling shaft: outer diameter: Ø 29,8 mm, hollow shaft: wedge hub profile 4 x 18 x 22 x 6 ( TGL 0-5471 ) Flange diameter: Ø 160 mm bolt circle diameter: Ø 142 mm, 5x bore: Ø 9 mm drive shaft ( motor ): Wedge hub profile 4 x 18 x 22 x 6 ( TGL 0-5471 ) Flange diameter ( motor ): Ø 130 mm bolt circle diameter (motor): Ø 90 mm, 4x bore: Ø 9 mm used, tested ! Dimensions: 310 x 240 x 160 mm

Gear set, spur gear, without hub, 21 pieces PAGUS Module 2 Teeth: 24 - 127 Diameter: Ø 52 - 258 mm Tooth spacing: 6,, 28 mm ( Module 2 ) Tooth depth: 4 mm Tooth width: 20 mm Angle of engagement: 20 ° shaft diameter: Ø 27 / 32 mm, with wedge hub profile, 4 wedges, width: 10 mm teeth: 2x 24 / 28 / 30 / 32 / 39 / 40 / 44 / 2x 48 / 52 / 58 / 60 / 64 / 68 / 72 / 76 / 93 / 96 / 100 / 127 < br /> diameter: Ø 2x 52 / 60 / 64 / 68 / 82 / 84 / 92 / 2x 100 / 108 / 116 / 124 / 132 / 140 / 148 / 156 / 190 / 196 / 204 / 258 mm used, tested ! Dimensions ( packaging ): 460 x 260 x 260 mm

Sprocket, double PAGUS Type 11/4-22 Number of teeth: 22 Distance between teeth: 34 mm width: 18 mm Diameter: Ø 138 mm Hub diameter: Ø 140 mm Hub length: 80 mm bore diameter: Ø 90 mm Groove width: 25 mm used, tested ! Dimensions: 138 x 80 x 138 mm

Elastic jaw coupling made of thermoplastic, claw coupling, KUPPLUNGSWERK FREITAL 1,6-16-16 TGL 23252 shaft diameter: Ø 16 / 16 mm bushing length: 29 / 29 mm groove width: 5 / 5 mm 2 clutch halves, hub length shortened on both sides hub diameter: Ø 45 mm coupling diameter: Ø 66 mm Total length: 62 mm Material: aluminium ( bushing ), polyamide ( TGL 20055/02 ) See also KU224, KU226 and KU227 ! Other combination of the clutch halves possible on request ! larger quantities on request ! New ! Dimensions: 62 x 66 x 66 mm

Flexible jaw coupling made of thermoplastic, claw coupling KUPPLUNGSWERK FREITAL 1,1,6-16-18 TGL 23252 Shaft diameter: Ø 16 / 18 mm Bushing length: 29 / 40 mm groove width: 5 / 6 mm 2 clutch halves, hub length shortened on one side hub diameter: Ø 45 mm Coupling diameter: Ø 66 mm Total length: 73 mm Material: aluminium ( bushing ), polyamide ( TGL 20055/02 ) See also KU224, KU225 and KU227 ! Other combination of the clutch halves possible on request ! larger quantities on request ! New ! Dimensions: 73 x 66 x 66 mm

Fan Impeller, Axial Impeller WINGFAN P9TR Diameter: Ø 990 mm Necessary shaft diameter: Ø 48 mm Wavelength: 112 mm Groove width: 14 mm Hub diameter: Ø 100 mm hub length: Ø 70 mm New ! Dimensions: 9990 x 990 x 210 mm

Geared motor variable / adjustable with brake and sliding hub GETRIEBEBAU NORD SK. 9032R-R 150U-90 L/4BR ( SK.9032R-R150U-90L/4BR ) 1.5 kW 2.2 - 14.1 rpm adjustable by handwheel 220 / 400 V IP55 slip hub / slipper clutch MAYR ROBA size 4 adjustable ! shaft diameter: Ø 30 mm used, tested ! Dimensions: 810 x 340 x 640 mm

max. wheel diameter: 180 mm gear width: 45 mm max. module: 4 min. module: 0,5 stroke length max.: 0 - 52 mm spindle taper: innen MK 4 table diameter: 160 mm table bore diameter: 75 mm no. of strokes: 355 - 630 Hub/min feed range: 0,008 - 0,4 mm/Hub dimensions of the machine ca.: 2,30 x 1,50 x 2,36 m power capacity: 6 kW weight of the machine ca.: 2.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brake wheel, brake disc, for electric motors diameter: Ø 250 mm brake pad width: 24 mm hollow shaft diameter: Ø 30 / 27 mm, toothed shaft profile, 18 teeth profile length: 38 mm hub thread ( inside): M36 x 2.0, length: 22 mm hub diameter: Ø 66 / 45 mm, Length: 50 mm spare part for 0.5 and 1.0 t BALKANCAR wire rope hoists ! used, tested ! dimensions: 250 x 250 x 50 mm

max. wheel diameter: 180 mm gear width: 45 mm max. module: 4 min. module: 0,5 stroke length max.: 0 - 52 mm spindle taper: innen MK 4 table diameter: 160 mm table bore diameter: 75 mm no. of strokes: 355 - 630 Hub/min feed range: 0,008 - 0,4 mm/Hub dimensions of the machine ca.: 2,30 x 1,50 x 2,36 m power capacity: 6 kW weight of the machine ca.: 2.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

mechanical coupling, multi-plate clutch TK KUPPLUNGSWERK 4180726 shaft diameter: Ø 40 mm wavelength: 145 mm 1 Groove, width: 12 mm Number of clutch plates: 2x 7 Clutch disc diameter: Ø 112 mm 2x Clutch bell: Ø 135 mm, length: 49 mm shaft diameter: Ø 50 mm hub diameter: Ø 70 mm, hub length: 40 mm used, tested ! Dimensions: 243 x 135 x 135 mm

1 work place certified, very well received., absolutely Mint double girder overhead travelling crane with helical rope stabilized LEG / DEMAG trolley Load approx. 2 x 4,000 = 8000 kg capacity of the hub works about 2 x 6,300 = 12,500 kg Wingspan approx. 10.880 mm Hook path about 10,000 mm Make SCHEFFER Year of production/workshop test 1996/2016 Crane classification H 3 B 4 Crane equipped with: -De-MAG lifting works in FEM 3 m, schrägseilstabiliert -Demag Crane and trolley motors -Radio control -Magnetic control -Magnetic beam with sheet metal magnet -SCHENCK weighing device -Long travel with frequency inverter control Working speeds: Hoist around 1.2/12.5 m / min Trolley gear approx. 8.0/32.0 m / min Crane chassis approx. 5.0 80.0 m / min

1 factory-tested, very well preserved double girder crane with 4 wheels per side to minimise wheel loads Load approx. 100,000/32,000 kg Wingspan approx. 26,700 mm Hook way approx. 14,000 mm Make SKET-year of manufacture/overhaul/workshop test 1981/2000/2016 Very low equipped with high-quality two-rail wind work trolley with main hub usage as a mounted crane 100 t and auxiliary hoist 32 t, cabins - and radio control, ideal wheel load distribution by 4 wheels per side working speeds: Hoist main hoist 100 t up to 0.25/2.5 m / min auxiliary hoist 32 t up to approx. 7.0 m / min Trolley gear approx. 7.0/20,0 m / min Crane chassis approx. 11.0/32.0 m / min

Halbautomatischer pneumatically operated hand filler, ATEX compliant, any filling volumes from 20-1000 ml with different dosage piston, higher dosing volumes with multiple hub possible, suitable for filling liquid and semi-solid products

Technische Daten: - min./max. Schnitthöhe 40 - 250 mm - Schnittbreite 150 mm - Lamellenstärke (abhänig von Holzart) >2,0 mm - Sägeblattlänge 500 mm - Schnittfuge 0,9 - 1,4 mm - Motor 15 kW (20 PS) / 400 V - Vorschhubgeschwindigkeit 0,3 - 1,7 m/min. - Hub des Gatterrahmens 210 mm - Schnittgenauigkeit (60 - 160 mm) +/- 0,1 mm - Schnittgenauigkeit (60 - 250 mm) +/- 0,2 mm - Schnittbreite Seitemlineal 60 - 150 mm - Schnittbreite Mittellineal 2 x 30 - 65 mm - Kanalanzahl 2-4 x 20-65 mm - min. Blocklänge 300 mm - Hubzahl 450 Hübe/min. - max. Anzahl der Sägeblätter (unter 200 mm) ca. 22 Stück - max. Anzahl der Sägeblätter (200-250 mm) ca. 12 Stück - Standzeit der Sägeblätter ca. 4 - 24 Std. - Druckluftanschluss 6 bar - inkl. Turbo Gebläse 0,75 kW (1 PS) - inkl. 7 x Einlaufkanal - inkl. 7 x Auslaufkanal - inkl. 2 x Sägerahmen 500 mm - inkl. Drehmomentschlüssel - inkl. temoeratu ...

45 To-Stoessel performance adjustable 45 mm hub adjustable 8-80 mm table size 690 x 410 mm punch mounting 50 mm unloaded 200 mm height 400 mm electric pneumat. Ortlinghaus single-disc clutch and disc brakes with auxiliary brake, Central grease lubrication system, Hohenverstellbar. Report, Wellenrissprufung, see table, UVV - 2014 - still in use ? see operating instructions, Tech.Zustand - good, ready for use

Technische Daten:   - Doppelte Gehrungen 45C - Einfache Gehrungen, bis 90C - Arbeitsbreite, max.   100 mm - Arbeitshöhe, max.    165 mm - Querschnitt   65/65 mm - Maßskala bis 1.500 mm - Luftdruck     6 - 8Bbar - Luftverbrauch je Hub 9 Liter - Luftschlauch, min.   10 mm - Nettogewicht           90 kg   Beschreibung:   Morsö H Halbautomatische, pneumatische Gehrungsstanze - kein Staub - Kein Lärm. Für Bilderleisten und Möbelleisten mit Falz schneidet Morsö H doppelte Gehrungen von 45C und einfache Gehrungen bis zu 90C. Im handwerklichen Gebrauch ist die Maschine auch zum Schneiden von Zapfen, Einschnitten, überdeckten Gehrungen etc. sehr geeignet. Die Morsö H arbeitet mit Messern \"im ziehenden Schnitt\" (nicht rotierend). Sie arbeitet, ohne Staub zu produzieren. Der Schnittabfall wird über eine Rutsche von der Maschine weggeleitet. Morsö H wird über  ...

Properties The manufacturer's scarce discharger Drive: Pneumatic Condition: fully functional with traces of use Colour: black Material: Steel Expertly disassembled and packed Price per piece Total quantity in stock: 6 PCs. Technical data Total width: 530 mm Height: 580mm Boom length: 590mm The Assembly traverse length: 430 mm Hub depth: 400 mm Wide pusher: 400 mm Tailor-made solutions We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.

- max. Werkstückbreite 200 mm - max. Werkstückdicke 200 mm - max. Hub 200 mm - Druckluftbedarf 6 bar - Steuerung über Fußpedal - Abmessungen L=500, B=490, H=1240 mm - Gewicht 160 kg

Overhauled: 2018 Year of construction: 2001 Blade 315-360 mm Motor power 15 KW Speed 15 - 130 min-1 Cutting speed 350-16.4-142.8 m / min Saw height control: electronic Working range Max square: 120 x 120 mm Workspace flat Max: 160 x 120 mm Work area round maximum: 140 mm Saw speed 0-65 mm / s adjustable Section length 5-970 mm (~ 9999 mm multiple hub) Nachschubgeschw. maximum 300 mm / s Weight 1600 kg Dimensions Lxwxh 1900mm x1250mm x2100mm The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled on request in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive  ...

PLC control: PLC B & R C220 Saw blade 350-400 mm Motor power 15 KW Speed 1500-6000 min-1 Cutting speed 1650-7500 m / min Saw height control: fully electronic Square maximum working range: 130 mm Flat maximum work area: 200 x 100 mm Round maximum working range: 130 mm Saw speed 0-40 mm / s adjustable Section length 5-900 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 350 mm / s (Saw) approximate weight: 2100 kg (Magazine), approx.: 2000 kg Dimensions Lxwxh (saw) approx.: 2000mm x 2000mm x 2200mm (Magazine) about: 7300mm x 3800mm x 1200mm Footprint Lxw 9200 x 4200 mm Fully automatic high-speed sawing machine with supply chain magazine for non-ferrous metals and plastics The machine is efficiently usable by their equipment and construction methods for a wide range of applications. The PLC control ensure a simple and very profitable operation of the system. Due to ...

Overhauled: 2018 Year of construction: 2001 Band saw blade 5800 x 41 x 1,3 mm Motor power approx. 11 KW with frequency control Cutting speed 20-170 m / min Square maximum work area: 430 x 430 mm Round maximum work area: 430 mm Section length 10-600 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 400 mm / s Weight approx. 4500 kg Dimensions Lxwxh 2910mm x3600mm x2200mm The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive -New electric components -Renewal of the pneumatic pipes -New pneumatic components -Renewal of the hydraulic pipes -Overhaul and renewal of hydraulic components -Overhaul of cabin -Overhaul of  ...