hub used for sale

pressure: 40 t dayligth: 250 mm stroke: 8 - 50 mm table clamping surface LxW: 620 x 450 mm table height over floor: 980 mm no. of strokes: 85 - 500 Hub/min distance between columns: 680 mm ram - range of adjustment: 50 mm number of T-slots: 4 ram surface: mm total power requirement: 8 kW dimensions of the machine ca.: 2,3 x 2,2 x 2,8 m weight of the machine ca.: 5,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40 t throat: - mm stroke: 8 - 90 mm table size: 630 x 430 mm ram adjustment: 60 mm no. of strokes: max. 65 Hub/min total power requirement: kW weight of the machine ca.: 2480 kg dimensions of the machine ca.: m - tiltable - table mounting plate - mechan. Overload protection in plunger (break plate) - pneum. clutch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t throat: 440 mm stroke: 20 - 120 mm table surface area: 1050 x 750 mm no. of strokes: 42 u. 62 Hub/min ram surface: 800 x 500 mm tool shank hole (depth x diameter): 85 x 50 mm hole in the table: 355 mm weight of the machine ca.: 11,2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t throat: - mm stroke: 250 mm Table dimensions: 2420 x 840 mm ram surface: 1850 x 650 mm dayligth: 500 mm ram adjustment: 110 mm distance between columns: 1900 mm table height: 170 mm no. of strokes: 25 - 45 Hub/min total power requirement: 22 kW dimensions of the machine ca.: 2550 x 2370 x 3820 mm weight: 30 t - pneumatic clutch - press safety valve, Herion - cam switch, Balluff - chain break monitoring - hydr. overload, Hydac - motor. alide adjustment with digital display - separate control cabinet with safety control ABB - separate two-hand control panel with foot switch - slidable side protective doors - front protection by light barriers vertical + horizontal The machine shown and described above is safe for hand inlays. The machine is also in anorther variant or also can be used as an automatic feeder. Equipment possible according to customer agreement. The data for ...

pressure: 40 t throat: 225 mm stroke: 8-84 mm Table dimensions: 580 x 450 mm ram adjustment: 55 mm no. of strokes: 130 Hub/min ram surface: 185 x 180 mm ram hole: 40 H7 mm hole in the table: 210 x 170 mm T-slots: 22 clamping plate: 570 x 450 x 65 mm total power requirement: 3,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 1,4 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 4,0 mm thickness at Niro-steel: 3,0 mm blade length: 200 mm angle adjustable from - to: 30 - 120 Grad no. of strokes: 60 Hub/min oil volume: 60 ltr. table:: 1000 x 800 mm total power requirement: 2,62 kW weight: 800 kg range L-W-H: 1000 x 1500 x 1440 mm Furnishing: - robust hydraulic notching machine, with adjustable angle - Adjustment range 30 - 120 degrees Adjustment with the 2x front handwheels - hydraulic clamping and locking - Infinitely adjustable cutting depth, with digital display - 2x locking accuracy stop, with stop bars - Stripper for sheet metal cutting - Collecting container for clippings - Freely movable foot pedal for triggering the stroke The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: 235 mm stroke: 6 - 100 mm no. of strokes: 60 Hub/min dayligth: 270 mm distance table - lower edge of ram: 370 mm ram adjustment: 80 mm table-size: 650 x 600 mm ram head dimension: 180 x 230 mm work height max.: 700 mm table hole: 110 mm total power requirement: 4,0 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This high performance Profi Press feature ...

Stop adjustment for Schellinger saw . Due to the frequent requests, the variant New was reissued. Specifications: Hub. 100 mm Lifting capacity. 3000 N (New) Lifting speed 28 mm/s Voltage: 400V 3AC 50Hz Mounting: Piston eye 16 mm body pendulum pin bolt 16 mm Limit switch Adjustable Limit switch Externally designed Thermal protection in the winding Protection class IP54 piston with scraper ring against chip dust

sheet width: 3050 mm plate thickness: 4 mm cutting angle: 1,5 ° table width: 530 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 4100 kg dimensions of the machine ca.: 3,63 x 2,20 x 1,28 m Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 13,0 mm thickness at Niro-steel: 8,0 mm down holder: 14 Stück no. of strokes: 11 Hub/min oil volume: 310 ltr. cutting angle: 2,0 ° throat: 350 mm table height: 900 mm total power requirement: 22,0 kW weight of the machine ca.: 12200 kg range L-W-H: ca. 4100 x 2300 x 2235 mm -------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom ...

sheet width: 3100 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm down holder: 14 Stück no. of strokes: 13 Hub/min oil volume: 260 ltr. cutting angle: 2,0 ° throat: 350 mm engine output: 22,0 kW back stop - adjustable: 1.000 mm weight: 10.575 kg. range L-W-H: 4,05 x 2,5 x 2,17 m -------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.trav ...

sheet width: 3100 mm plate thickness: 10,0 mm thickness at Niro-steel: 6,0 mm down holder: 14 Stück no. of strokes: 13 Hub/min oil volume: 260 ltr. cutting angle: 2,0 ° throat: 350 mm engine output: 22,0 kW back stop - adjustable: 1.000 mm weight: 10.575 kg. range L-W-H: 4,05 x 2,5 x 2,17 m -------------------------------------------------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.trav ...

pressure: 63 t stroke: 10-80 mm no. of strokes: 65-400 Hub/min ram - range of adjustment: 80 mm table surface area: 1030x550 mm ram surface: 920x450 mm hole in the table: 700x200 mm : 420 mm weight of the machine ca.: 10 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t throat: 220 mm stroke: 8-80 mm dayligth: 355 mm no. of strokes: 140 Hub/min ram adjustment: 50 mm ram surface: 220x180 mm table surface area: 160 mm hole in the table: 90 mm total power requirement: 7,5 kW weight of the machine ca.: 2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 10 mm cutting angle: 2 ° down holder: 14 Stück no. of strokes: 13 Hub/min throat: 350 mm oil volume: 260 l control: CYBELEC CybTouch 8 total power requirement: 22 kW weight of the machine ca.: 10.550 kg dimensions of the machine ca.: 4000x2250x2050 mm Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German The data for this ad was created with ModulMWS - the ...

sheet width: 3050 mm plate thickness: 6 mm distance between columns: 3100 mm back stop - adjustable: 750 mm cutting angle adjustment: 0,5 - 3,0 ° no. of strokes: 9 - 17 Hub/min table height over floor: 775 mm total power requirement: 7,5 kW weight of the machine ca.: 4,5 t dimensions of machine L x W x H: 3,75 x 1,65 x 1,7 m Accessories: electr. back stop, angle front stop, table extensions, spare knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 130 t throat: 450 mm stroke: 20-200 mm no. of strokes: 60/80 Hub/min ram - range of adjustment: 110 mm table surface area: 1000x880 mm ram surface: 900x450 mm hole in the table: 400x200 mm table height: 850 mm tool hole in ram: Ø 50 mm total power requirement: 15 kW weight of the machine ca.: 13,5 t dimensions of the machine ca.: BxTxH 1600x2700x3400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2550 mm plate thickness: 3 mm cutting angle: 1,5 ° table width: 510 mm table height: 820 mm back stop - adjustable: 600 mm no. of strokes: 35 Hub/min total power requirement: 3 kW weight of the machine ca.: 2400 kg dimensions of the machine ca.: 3,14 x 2,06 x 1,21 m Basic equipment: - manual backgauge with 600 mm travel - Measuring stop 800 mm - Foot pedal with emergency stop switch - Bracket arms in front for workpieces - Cutting line lighting - Protective demarcation OPTIONS: - Pneumatic sheet metal lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° - engine. Backgauge with NC control and 750 mm travel - engine. Backgauge with NC control and 1000 mm travel - piece counter More sizes at info @ rs-sperling .de The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

External gears workpiece diameter, max.: 130 mm Gear width: 25 mm Module, max.: 4 mm Control: SINUMERIK 840 D Spindle rotational speed: 0 - 30 U/min Helix angle: +/- 45 ? Radial slide travel X: 230 mm Y-axis (column - cross): +/- 25 mm Stroke length max.: 30 mm table turning speeds: 0 - 1000 U/min ram strokes 500 - 2500 Hub/min total power requirement 49 kW Machine Weight: 11500 Kg Required space (W x D x H) mm: 6400 x 4500 x 4400

External gears workpiece diameter, max.: 130 mm Gear width: 25 mm Module, max.: 4 mm Control: SINUMERIK 840 D Spindle rotational speed: 0 - 30 U/min Helix angle: +/- 45 ? Radial slide travel X: 230 mm Y-axis (column - cross): +/- 25 mm Stroke length max.: 30 mm table turning speeds: 0 - 1000 U/min ram strokes 500 - 2500 Hub/min total power requirement 49 kW Machine Weight: 11500 Kg Required space (W x D x H) mm: 6400 x 4500 x 4401

sheet width: 1040 mm plate thickness: 2,50 mm no. of strokes: 63 Hub/min cutting angle: 1,66 ° column arm: 100 mm table height: ca. 750 mm total power requirement: 3,0 kW weight of the machine ca.: 750 kg range L-W-H: 1470 x 1550 x 1020 mm Refurbished - shear blades sharpened like New () Furnishing: - manual backgauge 0-550 mm - with analogue measuring scale and magnifying glass - adjustable in front, by adjusting lever - 1x long side stop 850 mm - free-moving footswitch - Scratch protection on support table The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting dimensions max.: 600 x 1000 mm plate thickness: max. 3 mm cutting angle: 1,5 ° side stop electrical adjustable: 0 - 1010 mm rear stop electrical adjustable: 0 - 610 mm no. of strokes: 60 Hub/min total power requirement: 14 kW weight of the machine ca.: 8,7 t dimensions of machine L x W x H: 2,5 x 2,18 x 2,3 m Accessories: sheet metal stacking device on rails The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1.050 mm plate thickness: 4 mm cutting angle: 2,5 ° table width: 510 mm table height: 820 mm back stop - adjustable: 600 mm no. of strokes: 35 Hub/min total power requirement: 3 kW weight of the machine ca.: 1.100 kg dimensions of the machine ca.: 2,06 x 1,64 x 1,21 m Basic equipment: - manual backgauge with 600 mm travel - Measuring stop 800 mm - Foot pedal with emergency stop switch - Bracket arms in front for workpieces - Cutting line lighting - Protective demarcation OPTIONS: - Pneumatic sheet metal lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° - engine. Backgauge with NC control and 750 mm travel - engine. Backgauge with NC control and 1000 mm travel - piece counter More sizes at info @ rs-sperling .de The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t distance between columns: 2700 mm stroke: 280 mm ram adjustment: 120 mm daylight (stroke down, ram adjustment above): 550 mm table surface area: 2700 x 1200 mm ram surface: 2700 x 1200 mm no. of strokes: 20 - 40 Hub/min total power requirement: 22 kW weight of the machine ca.: 33 t dimensions of the machine ca.: B 3520 x T 2850 x H 4550 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t distance between columns: 2700 mm stroke: 280 mm ram adjustment: 120 mm daylight (stroke down, ram adjustment above): 550 mm table surface area: 2700 x 1200 mm ram surface: 2700 x 1200 mm no. of strokes: 20 - 40 Hub/min total power requirement: 22 kW weight of the machine ca.: 33 t dimensions of the machine ca.: B 3520 x T 2850 x H 4550 m Double-column eccentric press in a special design - size of the GTX 250 S, but only a pressing force of 160 t Furnishing: - hydraulic roller bars - hydraulic Tool clamping above + below - Motorized ram adjustment - infinitely variable speed control - hydraulic overload - Grease central lubrication - Hand oiler for ram weight compensation converted by MAWI GmbH Germany: - Swivel arm with Siemens Touch control panel - Light barrier from Sick - Safety control from Pilz + Siemens - frequency converter - Monitored protection area at the rear  ...

pressure: 15 t throat: 190 mm stroke: 6-80 mm stroke: 8-60 mm no. of strokes: 140 Hub/min ram - range of adjustment: 60 mm table surface area: 590x400 mm ram surface: 230x180 mm hole in the table: 200x140 mm table height: 800 mm tool hole in ram: Ø 40 mm weight of the machine ca.: 1 t dimensions of the machine ca.: BxTxH 1000x1000x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t throat: - mm stroke: 16 - 125 mm max. distance table - ram: 417 mm ram adjustment: 70 mm no. of strokes: im Dauerlauf 80 Hub/min table surface area: 800 x 630 mm ram surface: 500 x 400 mm clamping plate thickness: 70 mm total power requirement: 6 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate width: 3100 mm plate thickness: 6 mm distance between columns: 3150 mm no. of strokes: 20 - 75 Hub/min cutting angle: 0,5 - 1,25 ° down holder: 16 Stück voltage: 380 V frequency: 50 Hz power capacity: 10 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 4,0 x 2,1 x 1,7 m with electr. back stop, spare cutter, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 t throat: 300 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram - range of adjustment: 85 mm table surface area: 920x560 mm ram surface: 540x280 mm hole in the table: 320x190 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,6 t dimensions of the machine ca.: 2000x2000x2600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t throat: 350 mm stroke: 20-120 mm no. of strokes: 40-60 Hub/min ram - range of adjustment: 85 mm table surface area: 1050x690 mm ram surface: 650x320 mm hole in the table: 325x200 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8,6 t dimensions of the machine ca.: 2500x2500x2900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type: CNC lathe Year of construction1987 ControlSiemens Sinumerik 840 DSL(NEW) Mech. Overhaul2021 Machining diameter [mm] 350 Circulation diameter[mm] 400 Turning length [mm] 1000 Support path Z-axis [mm] 1185 Support path X-axis [mm] 370 Main spindle: Technology: DC motor Speed range: 22.4-3550 rpm Gear stages:3 Power: 36kW torque: 1600Nm Spindle head:Size 8 Chuck Diameter:250mm Tool carrier: Technology: Drum turret with directional logistics Tool holders: 12 pieces Tailstock: Pinole diameter:100 mm Pinole Hub:100mm Pinole axial force:15kN Internal cone mount:SK 30 Lunettes: Single and tandem arrangement, self-centering, clamping range:50 –130 mm Hydraulic operating pressure For chucks, drum revolvers, tailstocks and bezels: 60bar Clamping device pressure variable:5 –50 bar Container capacity:60 l Equipment / Accessories: Chip  ...

sheet width: 3000 mm plate thickness: 6 mm distance between columns: 3100 mm cutting angle: 1°15´ no. of strokes: 16 Hub/min down holder: 16 Stück back stop - adjustable: 750 mm total power requirement: 11 kW weight of the machine ca.: 5,7 t dimensions of machine L x W x H: 4,1 x 2,08 x 1,78 m Accessories: electr. back stop with DRO ELGO electric, angle front stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Paper drilling machine Dürselen Corta PB 04 N; good condition; cleaned and tested; 4 drill heads; drilling lubrication and cooling; Speed regulation; Speed table stroke adjuster; Max. Stacking height 50mm; Insertion depth behind drill 42mm; sliding table; Hole spacing 31.7-293mm; optionally with Filofax 7-fold drill head. Paper driller Dürselen Corta PB 04 N; good condition; cleaned and checked; 4 heads; lubrication and cooling system; adjustable drilling speed; adjustable table hub speed; max.pile hight 50mm; depht behind drillers 42mm; sliding table; hole distance 31.7-293mm; for oiption with 7xFilofax drilling head.

pressure: 80 t throat: - mm stroke: 8 - 112 mm table surface area: 830 x 550 mm no. of strokes: 30 - 85 Hub/min ram surface: 630 x 400 mm ram adjustment: 71 mm clamping plate: 990 x 550 mm table height over floor: 810 mm total power requirement: 10 kW weight of the machine ca.: 7,7 t dimensions of the machine ca.: 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table - with roller feed, make PRESSMAC, type MAC 380 P, belt width 300 mm Selling price applies without inspection and without a test run. The machine should be partially overhauled in our house (at an additional cost) - Complete disassembly and review - livery - new control cabinet with PLC and touchscreen including cabling. Price of the machine in partially overhauled condition: € 44,000.00 Delivery time for the partially overhauled machines: by agreement The data for this ad was created with ModulMWS - the  ...

sheet width: 3100 mm plate thickness: 13,0 mm thickness at Niro-steel: 8,0 mm down holder: 14 Stück no. of strokes: 11 - 20 Hub/min oil volume: 310 ltr. cutting angle: 0,05 - 2,0 ° throat: 350 mm table height: 900 mm total power requirement: 22,0 kW weight of the machine ca.: 13.300 kg range L-W-H: 5.110 x 2.570 x 2.400 mm -------------------------------------------------- heavy electr. / hydraulic CNC guillotine shears - guided by a backdrop with CYBELEC CNC touch screen control with electr. / hydr. Cutting gap and cutting angle adjustment -------------------------------------------------- Furnishing: - CNC guillotine guiding shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, includi ...

sheet width: 3100 mm plate thickness: 10 mm rear stop: 1000 mm throat: 350 mm cutting angle: 2,0 ° down holder: 14 Stk no. of strokes: 13 Hub/min total power requirement: 22 kW dimensions of the machine ca.: 4050 x 2500 x 2170 mm weight of the machine ca.: 10575 kg -------------------------------------------------- --------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- --------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.tra ...

sheet width: 3100 mm plate thickness: 6 mm rear stop: 1000 mm throat: 350 mm cutting angle: 0,5 - 1,5 ° down holder: 14 Stk no. of strokes: 16 - 24 Hub/min total power requirement: 11 kW dimensions of the machine ca.: 4100 x 2200 x 2190 mm weight of the machine ca.: 7060 kg -------------------------------------------------- --------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- --------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up a ...

sheet width: 3100 mm plate thickness: 6 mm rear stop: 1000 mm cutting angle: 1,2 ° down holder: 14 Stk no. of strokes: 18 Hub/min total power requirement: 11 kW dimensions of the machine ca.: 4.000 x 2.100 x 1.640 mm ----------------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment ----------------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support ar ...

sheet width: 3100 mm plate thickness: 6 mm rear stop: 1000 mm cutting angle: 1,2 ° down holder: 14 Stk no. of strokes: 18 Hub/min total power requirement: 11 kW dimensions of the machine ca.: 4.000 x 2.100 x 1.640 mm ----------------------------------------------------------- electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment ----------------------------------------------------------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. can be folded up at max.travel, for longer cuts - 1x side stop - 2x front support ar ...

press capacity: 50 KN strokes - infinitely variable: max. 100 Hub/min table-size: 550 x 500 mm distance between columns: 370 x 320 mm height of stroke: 30 mm Control: Touch air pressure - required: 6 bar voltage: 380 V weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2,55 x 1,00 x 2,10 (2,6) m Built-in tool 220 x 230 mm height 75 mm + 60 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 10 mm rear stop: 1000 mm throat: 350 mm cutting angle: 2,0 ° down holder: 14 Stk no. of strokes: 13 Hub/min total power requirement: 22 kW dimensions of the machine ca.: 4050 x 2500 x 2170 mm weight of the machine ca.: 10575 kg -------------------------------------------------- --------- heavy electr. / hydraulic CNC swing cut shears with CYBELEC CNC touch screen control with electr. / hydr. Kerf adjustment -------------------------------------------------- --------- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. Can be folded up at max.tra ...

sheet width: 3020 mm plate thickness: 25,00 mm no. of strokes: 4 - 8 Hub/min back stop - adjustable: ca. 1250 mm work height max.: 1040 mm Control: SC 70 cutting angle: 0,5 - 3,0 ° down holder: 18 Stück engine output: 56,0 kW weight of the machine ca.: 38.000 kg range L-W-H: 4200 x 2600 x 2650 mm good condition - ready to use (!) New price ~ 155.000 euros Furnishing: - heavy hydraulic / link-guided guillotine shears - HACO DNC - control model SC 70 200 programs x 127 sets per program Material library max. 32 materials programmable positioning from the backgauge automatic electro-hydraulic cutting gap adjustment automatic electro-hydraulic cutting angle adjustment automatic retraction from the backgauge automatic and manual programming mode Pivoting control panel, front left - electrical cutting length limitation - front finger protection - Ball casters in the table - 1x extra ...

honing diameter: 1,5 - 165 mm bore length: max. 406 mm spindle turning speed range: 200 - 2500 (12x) U/min stroke speeds: 80 - 310 (5x) Hub/min weight: 0,60 t connected load: 2,5 kW range L-W-H: 2x1,3x1,7 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t throat: 170 mm stroke: 6-60 mm no. of strokes: 160 Hub/min ram - range of adjustment: 40 mm table surface area: 420x320 mm ram surface: 180x140 mm hole in the table: Ø 120 mm table height: 850 mm tool hole in ram: Ø 32 mm weight of the machine ca.: 1 t dimensions of the machine ca.: 1200x1200x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. ram stroke: mm no. of strokes: Hub/min head swivability: ° The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

300 t , Stand distance 1.800 , with rope passage , Installation height 1.000 , Table 1.800 x 1.000 , Ram 1.800 x 1.000 , Hub 600 , Rapid traverse to + From 414 mm/sec. , ram speed 10 - 50 mm/sec. , retraction force 380 kN , table cushion 800 kN , 90 kW , Weight 43.000 kg , ground-level installation

pressure: 125 t stroke: 10-80 mm no. of strokes: 240 Hub/min ram - range of adjustment: 80 mm table surface area: 850x600 mm ram surface: 760x550 mm hole in the table: 850x130 verstellbar mm table height: 1100 mm tool hole in ram: Ø 50 mm total power requirement: kW weight of the machine ca.: 13 t dimensions of the machine ca.: BxTxH: 3000x2000x3300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 20 t stroke: 8-38 mm no. of strokes: 100-1800 Hub/min table surface area: 400x400 mm table pass: 380x80 mm table height: 1000 mm weight of the machine ca.: 4 t dimensions of the machine ca.: BxTxH 1600x1600x3100mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t throat: 400 mm stroke: 8 - 112 mm no. of strokes: 120 Hub/min ram adjustment: 70 mm dayligth: 412 mm table surface area: 850 x 600 mm ram surface: 640 x 400 mm column daylight: (hinten) 680 mm total power requirement: 11 kW weight of the machine ca.: 6,1 t dimensions of the machine ca.: B 1,3 x T 1,9 x H 3,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1500 mm plate thickness: 4 mm back stop - adjustable: 10-1000 mm no. of strokes: ca. 20 Hub/min cutting angle: 1 ° table height: 850 mm total power requirement: 8 kW weight of the machine ca.: 3300 kg dimensions of the machine ca.: 2500x2000x2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.