ht mir used for sale

hydraulic test pump FLUKE Pressure generation up to 700 bar / 10,000 psi Two pressure connections 3/8" female thread Digital pressure gauge up to 400 bar

Continuous mixer, single-shaft mixer, trough mixer for bulk materials used Manufacturer: AVA-HUEP GmbH Type: HTK 2100 Year: 1999 Capacity 2090 l Temp max 80°C Mixer approx. Ø 900 x 2900 mm Outlet approx. 600 x 360 mm Drive with geared motor 55 kW RPM 380/660 V Dimensions Total approx. 6000 x 2000 x 2000 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Plasma cutting machine, plasma cutter for plasma cutting system -Manufacturer: Hypertherm, gas console for plasma cutting machine -Type: 073239 from plasma cutting machine HT2000LHF -Dimensions: 295/175/H370 mm -Weight: 9.9 kg

Zeiss CNC Coordinate Measuring Machine Prismo MP5 Year of manufacture: 8/1999 Last calibration 9/2023 Measuring range: X= 900 mm, Y= 1200 mm, Z= 700 mm Device features, equipment: Control C98 with control panel Sensors RDS with RST Pushbutton Changer Magazine 5-fold RST 5x probing system Dpp7Jl Pushbutton Accessories Measuring ball Calculator with monitor Software Calypso Basic 5.4 Loading system Other accessories Complete retrofit C99 and Calypso possible

Plasma cutting machine, remote current control unit, current selector switch -Manufacturer: Hypertherm, Remote Current Control Unit current selector switch -Type: 073045 from plasma cutting machine HT2000LHF -Dimensions: 230/165/H70 mm -Weight: 1.1 kg

CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 7/2019 At call! Siemens 840D-SL Shopturn Main spindle BigBore spindle passage 76mm KK8 - 4,000 1/min Sub-spindle KK6 - 5,000 1/min 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price! WB mechanics GmbH is a precision mechanics workshop that markets its ...

Roller Chassis - Carrier Chassis YALE Payload 2,000 kg Flange width 66 to 220 mm Flange thickness max. 25 mm Smallest curve radius 1.15 m Hand force at nominal load 7 kg Weight approx. 16 kg 16 units in stock - unit price

CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 10/2017 At call! Siemens 840D-SL Shopturn Main Spindle SuperBigBore Spindle Passage 95mm KK8 - 3,500 1/min Sub-spindle KK6 - 5,000 1/min Milling spindle HSK-T63 12,000 1/min / new milling spindle 2024 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price!  ...

Condition of the machine: The machine is currently in a used, unoverhauled condition. All machine wear parts are replaced, including the feed spindle in the X-axis, and all assemblies are restored to like-new condition. After the overhaul, the machine can be easily compared to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to mint condition. After completion of the work, the machine receives a measurement report according to the original specifications of the manufacturer. Electronics: The electronics and the control cabinet housing will be completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication un ...

Adjustable geared motor, variable speed geared motor, electric motor -Motor power: 0.12 kW -Speed range: 0.09-0.81 rpm -adjustable -Drive shaft: Ø 35 mm -Protection class: IP 44 -Dimensions: 750/250/H270 mm -Weight: 55 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.55 kW -Speed range: 8-72 rpm -Motor: adjustable -Drive shaft: Ø 22 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 650/203/H220 mm -Weight: 30 kg

Troqueladora con hot stamping Fomato Max de papel 760 x 520 mm Formato Min de papel 320 x 260 mm Formato max de troquelado 750 x 510 mm Formato max de stamping 740 x 500 mm Altura de pila de entrada 1280 mm Altura pila de salida 1100 mm Velocidad max 9000 h Presion 250 T 8 zonas independientes de calentamiento Potencia 38 KW Peso 14 Toneladas

High-temperature chamber furnace with an operating temperature of up to 2,000 °C, including water cooling and sequence control with automatic valves. Usable space: 600 mm x 600 mm x 600 mm (= 220 l.), el. Power: 117 kW,

turning diameter over bed: 1250 mm turning diameter over slide rest: 1000 mm turning length: 11000 mm total power requirement: kW weight of the machine ca.: 49 t dimensions of the machine ca.: m Center height 720 mm Center distance 11000 mm Turning diameter over bed 1250 mm Turning diameter over slide 1000 mm Workpiece weight max 12 to Speed 3-315 rpm - stepless Motor power 55 kW (DC) Equipment 1 position indicator HEIDENHAIN | Type ND 780 for 1 axis 1 four-jaw faceplate Ø 1000 mm 1 fixed steady rest 1 ring steady rest with four-jaw faceplate Ø 920 mm 1 Autom. 4-pos. tool holder 1 Chip conveyor 1 Machine lamp 1 Coolant device Operating key | operating manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mixer Manufacturer : AVA Huep GmbH & Co. KG Type: HTL 3 Power: 1.1 kW Content: 4 liters gross volume Technical specifications : Stainless steel mixers for powdery to paste-like products Dimensions Speed 15-400 rpm, rated speed 128 rpm Frequency-controlled Width approx. 512 mm Height approx. 701 mm without table Length approx. 1076 kg Weight approx. 200 kg Documents: available

Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible.

(showroom machine) Main Technical Data Number of Spindles: 4 spindles Gundrilling Diameter Range: 4 - 20mm Working Method of Tool: Rotating Working Method of workpiece: Rotating Clamping Method: Clamping Cone Max. Drilling Depth: 800mm Workpiece Max.Outer Diameter: 300mm Drilling Feedrate: 1-180mm/min Spindle Center Height: 220mm Spindle Distance: 158.75mm Control System: SIEMENS 828Dsl A.C. Spindle Motor Power: 2×15 kW Spindle Speed (Infinitely Variable): Max.5000 RPM Tailstock Spindle Speed: 70rpm Rapid Traverse Speed: 6000mm/min High Pressure Pump Motor Power: 4×7.5 kW Coolant Flow Rate: 4×46 L/min Filter accuracy: 20µm Max.Coolant Pressure: 100 bar Oil Tank: 1200L Weight of Machine: 10000 Kg. Electrical Supply:  ...

rockwell hardness: . brinell hardness: . weight: kg dimensions: mm Hardness tester Rockwell measurement with underframe table all technical data without guarantee The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25227 Specifications: - Pressure capacity 150 t - Working width 3600 mm - Passage between the uprights 3150 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Feed speed 70 mm/sec. - Working speed 7 mm/sec. - Retraction speed 60 mm/sec. - Ram stroke 120 mm - Adjustment range fixed stops 120 mm - Motor power approx. 7.5 kW - Oil filling approx. 300 l - Space requirement approx. W 3850 x H 2300 x D 1600 mm - Weight approx. 8700 kg - with: - Swivel arm – control panel with ATL 550 control - For crimping depth + backgauge -Mot. Backgauge - Crowning device - Lasersafe FIESSLER - 4-fold universal die, split sharpening tool + deer's foot tool - Two-hand control panel, foot switch,

Cylindrical Grinding Machine TSCHUDIN type HTG 400 Between points: 400 mm Centre height: 100 mm Cone: CM4 Spindle speed: from 70 to 500 RPM Max table travel: 420 mm Table orientation at 15° Grinding wheel: Ø 300 mm Retractable tailstock CM3 Machine rebuilt by REWITECH SA (Switzerland) in 1995 Equipped with one settling tank PHILIPS Voltage: 380 V Dimensions (L x W x H): 2000 x 1400 x 1600 mm Weight: approx 1,5 T

Hydraulic guillotine shears STEINER type HTS 30/20 RMasch. No. 315 Year of construction 1982Cutting length 3050 mmCutting thickness 20 mmBack gauge 800 mm controlledMotor power approx. 30 kWNet connection 400 volts, 50 Hz- Back gauge with positioning control ELGO- Back gauge adjustment via ball screws- Safety light barrier SICK front as protection against interference- 3 pieces Material Support arms with ball rollers- Electric foot switch- Replacement knifeSpace requirement of the basic machine L x W x H 4650 x 2610 x 3200

Electrohydraulic Scissor Fork StackerScissor Pallet Truck, Pallet Pallet TruckTOYOTA / BT Type HTH 10 EFabr. No. 481795 year of manufacture 2005Lifting capacity 1000 kgLifting height max. 800 mmOverall height drained 85 mmFork length 1190 mm- Electric stroke via 12 volts Battery operated- Manual stroke via hand lever as on the pallet truck- TOYOTA Industrial Equipment Europe SARL (Made in France)- Long-stroke hydraulic cylinder- with single roller- Integrated charger (mains voltage 230 Volts, with IEC plug)Net weight 140

A total of 6 horizontal bag sealing machines Joke with vacuum and large container function are available. Seal length: 1000mm, sealing method: impulse sealing, sealing performance: 2x0.4mm, seam width: 6mm-8mm, rail opening: 30mm, throat depth: 153mm, machine dimensions X/Y/Z: approx. 1300mm/1100mm/1950mm. Documentation available. An on-site inspection is possible.

ATiB HTUB 80/100-L RF Charger HTUB is the top-of-the-line RF charger designed for the highest performance. This range includes all the main characteristics of RF ranges in terms of efficiency, Power factor, ventilation, internal structure (dedicated 3 compartments) and general flexibility. An integrated digital interface with OLED display and integrated USB enables the best and easiest overview/setting of charging parameters, diagnostic and data reports. Main features AC mains voltage: 480Vac (3ph) 50-60Hz / 600Vac (3ph) 50-60Hz Display: OLED/LCD display, 4 LEDs and 4 control buttons Setting Type: OLED Display: Current, Capacity and 7 pre-set Charging Characteristics Through PC laptop/USB port: advanced programming Data storage: report on the last 50 charges and important technical data (integrated USB port) Cooling System: Dedicated air cooling directly to the heat sink ...

Hardness Tester WOLPERT Testor - HT 1E Brinell: 250 kg Rockwell: 150 kg Projection: 125 mm Workpiece height - max.: 200 mm Machine weight approx.: 70 kg Approx. space requirement: 400 x 200 x 700 mm Test load: 62.5 / 100 / 150 / 187.5 / 250 kg. Brinell Dto. 100 and 150

General SKU401W1244 LocationBarneveld MakeAva-Huep TypeHTC2100 No.5974 Year of construction2009 Main Features MaterialStainless steel Volume2100 Ltr. Motor55 KW Specified Features - Powder turbo mixer Powder turbo mixercheck T-arms10 pieces Capacity2100 l. Useful capacity1600 l. Trough sizesDia. 960x2800 mm Inlet900x1400 mm Inspection hatch550x300 mm OutletDia. 350 mm Max. temperature+5°C/+80°C Glands air purgedcheck Motor55 kW, 400 volt, 1460 rpm Speed mixing shaft35 rpm With lump breakercheck 3x Motor5,5 kW, 400 volt, 1438 rpm (3x) MaterialStainless steel 1.4571 (316Ti) Information Total height1,36 m Weight5000 kg Floorspace5,72x1,76 m Extra SpecificationsWithout outlet lith. paddles are equipped with hardop welding. Powder turbo mixersAva-HuepMixers > Powder turbo mixersBrand > Ava-Huep What you can expect from Foeth: -- Machine is in working conditio ...

General SKU430W1383 LocationBarneveld MakeHuber TypeHTS 30-H6 Pressure Working pressure4.7 Bar Main Features Heating (medium)Electric Capacity30 KW Temp.90 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Heating medium:Water Temperature3°C-95°C Tank capacity44 l., (26 l.) With pumpcheck Capacity240 l/min With temperature controllercheck Information Mach.No.S506504 Mounted on wheelscheck With switchgearcheck Floorspace1,10x1,10 m CEcheck Total height1,20 m Weight270 kg Extra SpecificationsThe HTS has no mechanical refrigeration but is fitted with a circulation pump and a plate heat exchanger. This compact circulator provides low cost cooling with a stable pressure and flow to the application. As no mechanical refrigeration system is fitted (compressor etc.), the machine is silent, efficient and energy saving ...

General SKU211N1317 LocationBarneveld MakeHTT TypeCPS 05-2-28-1-2-S Year of construction1998 Main Features Heating (medium)Oil Capacity28 KW Temp.280 °C Specified Features - Temperature control unit Thermal oil heatercheck Heating medium:Marlotherm LH Heating capacity28 kW With coolingcheck Capacity43 kW Temperature280°C With pumpcheck Capacity7,2 m3/hr With temperature controllercheck Information With switchcheck With switchgearcheck Floorspace1,2 x 0,4 m CEcheck Total height1,2 m Weight250 kgTemperature control unitsHTTHeat exchangers > Temperature control unitsBrand > HTT What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Shrink Tunnel Film Shrink Tunnel Manufacturer: Diez Type: HTC5030D Year of manufacture: 2018 No operating hours! Passage width: approx. 50 cm Passage height: approx. 30 cm Total length: approx. 220 cm

Key data: 800 kN

Clamping force: 80 t. Clamping type: Toggle system. Tie-bar spacing: 270 × 310 mm. Platen size: 310 × 310 mm. Mold height: 150–270 mm. Opening stroke (approx.): 310 mm. Ejector stroke: 70 mm. Screw diameter: 26 mm (to be confirmed), Injection volume: 124 cm³. Injection weight (PS): 60–103 g. L/D ratio: 19–22:1. Approx. machine dimensions: 3500 × 1200 × 1600 mm. Weight: 3000–4000 kg. Machine No.: 200000800292.

Key data: 1500 kN

Clamping force: 150 t. Clamping type: Toggle system. Tie-bar spacing: 470 × 470 mm. Platen size: 700 × 700 mm. Mold height (min–max, approx.): 180–500 mm. Opening stroke: 420 mm. Ejector stroke: 130 mm. Injection volume: 320 cm³. Screw diameter: 42/45 mm (to be confirmed). Heating zones: 4. Machine dimensions: 5000 × 1400 × 2000 mm. Machine weight: 6000–7000 kg.

Heat pump, chiller - air-cooled, Type: Taurus HTAT 055/HE – 130 / 111 kW Manufacturer: MTA S.p.A. Taurus HTAT 055/HE are compact heat pump / water cooling units that are suitable for outdoor installation including with hydronic kit (tank 200 ltr. + P15 pump) for low outside temperature down to -20°C with electron. Fan speed control (EC fans). Heating capacity kW 130 Heating water temp. Exit/inlet: 45 / 40°C Volume flow m³/h 22.5 Available pump pressure bar 1.03 Ambient temperature °C +7 Cooling capacity kW 111 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 19 Available pump pressure bar 1.26 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 60 Max. Current (A) 98 Starting Current Circuit (A) 312 Protection class: IP54 Dimensions: Length mm 3415, width mm 11 ...

A Dornier weaving machine is available. Working width: 3300mm. Documentation available. Including heald frames. Without prewinder. On-site inspection is possible.

- Thermal oil boiler - HTT WTÖ 200 - HTT WTÖ 160D - Daub KO 160 - all with oil burner

Stainless Steel Finish Ulma Etna Model HT280 Capable of 80 packs per minute Touchscreen for quick adjustments Can do clear or coloured film print reg In excellent condition Ideal for food and many other applications

max: 1500 KG min: 10 KG serial number: CO13136LG documentation: keine : 30 € The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The HTST (High-Temperature Short-Time) pasteuriser from Dairy Machinery UK is designed to provide efficient pasteurization of liquid dairy products while preserving their quality and safety. Here are some key features:, - Process Efficiency: HTST pasteurisation involves heating the dairy product to a high temperature (typically around 72°C and other temperatures on request ) for a short time (15-30 seconds and other timings on request ), which kills harmful bacteria and extends shelf life., - Quality Preservation: This method retains the taste and nutritional value of the dairy products better than traditional pasteurization methods, minimizing the impact on flavor and color., - Automated Control: Many HTST systems come with automated controls that monitor temperatures and flow rates, ensuring consistent pasteurisation and reducing human error., - Compliance Standards: Designed to meet  ...

This SMTCL HTC 63300 was manufactured in 2007. A robust horizontal turning machine featuring a swing diameter over bed of 810 mm and over saddle of 580 mm. It includes a 500 mm chuck, a spindle speed range of 50 - 1800 rpm, and an auto turret with 12 tool positions. Ideal for handling large workpieces with its 3000 mm distance between centers. Contact us for more information about this machine.

Band saw Type: HTZ 1000 Manufacturer: Mebor Year: 2003 Cutting length: 8 m Machine in good condition, under power Find more here - / Contact us at -

This Metallkraft HTBS PRO 3113 was manufactured in 2022. Its a hydraulic shearing machine designed for precise cutting of steel and stainless steel plates up to 13 mm thick. Features include a CNC-controlled back gauge, motorized cutting gap and angle adjustment, and built-in LED lighting for enhanced visibility. Ideal for industrial settings requiring high precision. Contact us for more information about this machine.

I am selling a vacuum press filling HTS 065. Very good condition. Lamella system For filling and dosing 200 l hopper. Machine in original condition, fully functional. Possibility of transportation and installation of the device by an external service company. Price negotiable.

Band saw Type: HTZ 1100 Pro Manufacturer: Mebor Year: 2020 MLD round timber conveyor Roller conveyor for sawn timber RC M800 L-P Machine in good condition, fully functional Find more here - / Contact us at -

1 cylindrical grinding machine Make: Tschudin Model: HTG 400 Year of Make: 1967 Center width: 400 mm Tip height: 100 mm Cone: MK4 Spindle speed: 70 – 500 rpm. Max. table travel: 420 mm Table swivel by 15° Grinding wheel: Ø 300 mm Retractable Tailstock MK3 Grinding spindle – Disc diameter: 300 mm – Disc width: up to 50 mm – Disc bore: 127 mm – Disc speeds: 1500 rpm; 1700 rpm; 1900 rpm Weight approx.: 1.5 tons.

One HandTop ultraviolet flatbed printer is available. Print resolution X/Y: 1200dpi/1200dpi, max. material size: 1600mm/1000mm, max. material thickness: 100mm, print speed per hour Draft/Production/Quality: 36m²/27m²/20m², color system: CMYK. Machine dimensions X/Y/Z: approx. 3400mm/2200mm/1250mm, weight: approx. 500kg. Documentation vorhanden. An on-site inspection is possible.

Machine / Stirring Brush REGO 40L 6 Wires Stainless Steel New✠Product Descriptionâœ" Type: REGO, 40 Lâœ" Condition: Newâœ" Material: Stainless Steelâœ" 6 Thick Wiresâœ" for Anchoring Machines of the Manufacturer Regoâœ" Total Length: 450 mmDetails see pictures

Machine / Mixing Broom REGO 40L 12 Wires Stainless Steel Newâ Product Descriptionâœ" Type: REGO, 40 Lâœ" Condition: Newâœ" Material: Stainless Steelâœ" 12 Thick Wiresâœ" for Anchoring Machines of the Manufacturer Regoâœ" Total Length: 450 mmDetails see pictures

Machine / Impact Brush REGO 40L 15 Wires Stainless Steel Newâ Product Descriptionâœ" Type: REGO, 40 Lâœ" Condition: Newâœ" Material: Stainless Steelâœ" 15 Thick Wiresâœ" for Anchor Machines of the Manufacturer Regoâœ" Total Length: 450 mmDetails see pictures

Machine / Stirring Brush REGO 20L 6 Wires Stainless Steel Newâ Product Descriptionâœ" Type: REGO, 20 Lâœ" Condition: Newâœ" Material: Stainless Steelâœ" 6 Thick Wiresâœ" for Anchoring Machines of the Manufacturer Regoâœ" Total Length: 350 mmDetails see pictures

Machine / Mixing Broom REGO 20L 12 Wires Stainless Steel Newâ Product Descriptionâœ" Type: REGO, 20 Lâœ" Condition: Newâœ" Material: Stainless Steelâœ" 12 Thick Wiresâœ" for Sling Machines of the Manufacturer Regoâœ" Total Length: 350 mmDetails see pictures

Machine / Mixing Broom REGO 20L 15 Wires Stainless Steel Newâ Product Descriptionâœ" Type: REGO, 20 Lâœ" Condition: Newâœ" Material: Stainless Steelâœ" 15 Thick Wiresâœ" for Anchor Machines of the Manufacturer Regoâœ" Total Length: 350 mmDetails see pictures