hss used for sale

Drill diameter: 2 - 13 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.18 kW Weight, approx.: 11 kg Dimensions, approx.: 320 x 180 x 190 cm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 11 collet pliers ER 20, 3 - 13 mm - collet holder ER 20

Drill diameter: 13 - 32 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.25 kW Weight, approx.: 28 kg Dimensions, approx.: 490 x 250 x 260 mm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 20 collet pliers ER 40, 13 - 32 mm - collet holder ER 40 Optional extension, at extra cost: - collet set 5pcs. 8.0 / 9.0 / 10.0 /11.0 /12.0 mm

Saw blade grinding machine Schmidt Tempo ECT 502 Handling with robot and 4 charging stations for neutooth and re-sharpening of HSS saw blades. With CBN deep grinding for the highest quality and cost-effectiveness and robot loading for manless grinding. 2019 technically overhauled and prepared for grinding with oil. Grinding range: 60 to 520 mm Saw blade thickness: max. 6 mm Number of teeth: 20 to 999 - Automatic charging system with industrial robot - AUTOPOS: automatic positioning of the saw blade to the grinding wheel - TEMPOTRONIC control - Special tooth shapes: 10 forms freely programmable and stored - Full encapsulation - Separate control cabinet - Data entry for batch processing via PC - Integrated halogen lamp - Automatic central lubrication - Operating instructions and operating tools

Machine for chamfering of HSS and segment circuit saegen - Saegeblatt: 80 - 910 mm - Grinding wheels: 200 x 32 mm - Weight: approx. 1800 kg - Full cladding - integrated wet grinding device - Signal lamp for displaying the end of work - Halogen lamp - Central lubrication - Accessories - Operating instructions

Circular saw blade Anfasautomat The BK 450 circular blade contact machine automatically handles the lateral chamfering or bending of HSS saegee blowers up to 450 mm in diameter. The special feature of the machine is that it is connected to two separate grinding units and thus the saege leaf is fasted on both sides at the same time. This means lower ruest and faster grinding times. Diameter range: 50 - 450 mm Tooth pitch: 2 - 12.5 mm Saegeblatt thickness: max. 4 mm CBN (for groove grinding): 25x 8 and 30x 8 mm CBN or bakelite: 60 x12 mm Weight: approx. 115 kg Dimensions (L x W x H): 735 x 630 x 1350 mm

High performance column boring machine Technical data: - Drilling capacity in steel ST 60 32 mm - Thread cutting device up to M 20 - Drilling spindle holder MK 3 - Feeds 0.1 + 0.2 + 0.3 mm/U - Drilling spindle stroke 150 mm - 12 drilling spindle speeds 80 - 1400 rpm - Extension 280 mm - max distance table - drilling spindle 760 mm - Table with 2 T-slots 550 x 400 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.4 / 2.3 kW - Space requirement approx. W 550 x H 1950 x D 850 mm - Weight approx. 360 kg - with: - coolant device - Quick-release drilling chuck - 20 pcs. HSS div. Drill 8 - 25 mm

grinding range: max. 30 mm angle adjustable from - to: horizontal 0-180 Grad angle adjustable from - to: vertikal 0-45 Grad angle adjustable from - to: negativ 0-52 Grad connected load: 230 V wheel diameter: 100 mm weight of the machine ca.: 55 Kg dimensions: 0,5 x 0,4 x 0,4 m This grinding machine is suitable for: Twist drill (max.13mm), milling cutter and turning tool (max. 30mm) comes with: - chisel grinding tool - Diamond grinding stone for HM. - White whetstone for HSS. - LED lighting - All adjustment tools. - Diamond dresser for sharpening stones. C-5 collet set with the following sizes. 1.5 - 2 - 3 - 4 - 5 - 6 - 7 - 8 -9 -10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding range: 8 - 32 mm sharp cornered angle min./max.: 90 - 140 Grad connected load: 230 V weight of the machine ca.: 16 Kg dimensions of the machine ca.: 0,43 x 0,24 x 0,24 m Drill grinding machine: Additional station for grinding back the drilling cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Hard metals with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running thanks to its heavy weight and rubber feet. Sharpening angle adjustable for all common twist drills. Package dimensions: 430 x 240 x 240mm. Weight 16kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Saw blade chamfering machine Manufacturer: Loroch Type: AK Year of construction: 1991 For chamfering HSS and segment circular saws

Specifications: Drill diameter: 3 - 32 mm Center angle: 90° - 140° Speed grinding wheel: 4800 1/min Connection: 230 V Motor power: 0.25 kW Weight, approx.: 32 kg Dimensions LxWxH, approx.: 360 x 250 x 310 mm Characteristics: - Ideal for grinding HSS/carbide twist drills - Easy to use - Safe operation due to forced grinding process - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including spout alignment for flawless centering of the drill on the workpiece and to reduce the feed force during drilling - Device for back grinding the drill edges to reduce friction between drill and workpiece - Rotor with precision ball bearing - Vibration-free running due to high dead weight - CE Scope of delivery: - Grinding wheel CBN - 30 ER collets ER 40, 13 - 32 mm (suitable for intermediate sizes) - ...

SCM-MINIMAX Universal Combi Model CU410 CLASSIC Specifications: - Useful working width of flush tables 410 mm - total length of the wire plates mm 1800 - Tilting wire guide degrees 90-45 - top dimensions thickness 410x605 mm - feed speed at thickness m/min 7 - min/max working height at thickness 3/230 mm - Dimensions of the spindle moulder table mm 1100x339 - Saw blade inclination 90-45 degrees - max. diam. Saw blade mm 315 - max. protrusion of the saw blade from the table at 90° mm 100 - max. protrusion of the saw blade from the table at 45° mm 80 - max. squaring capacity (basic machine) mm 1465 - cutting width at rip fence 820 mm - Useful spindle length 125 mm - Spindle rotation speed rpm 1400-3500-6000-8000 - max. spindle moulder diameter under the table 210 mm - max. tenoning tool diameter 275 mm - Motor power (n. 3 motors) HP 4 kw 3 Hz 50 Standard equipment - ...

Specifications: Drill diameter: 3 - 20 mm Center angle: 90° - 140° Speed: 4800 1/min Connection: 230 V Motor power: 0.12kW Weight, approx.: 8.6 kg Dimensions, approx.: 290 x 150 x 180 cm Characteristics: - Ideal for grinding HSS/carbide twist drills - Safe operation due to forced grinding process - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including propping alignment to reduce feed force - Device for back grinding the drill edges to reduce friction between drill and workpiece - Rotor with precision ball bearing - CE Scope of delivery: - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - 7 collets ER 24, 4 - 20 mm - Collet holder ER 20, ER 25

Year: ca. 2001 Serial No. R11/47, Roundpile Feeder with Overhead Digital Panet, HSS Gluing System, 1st Station: 4 Pockets, 2nd Station: 4 Pockets, 3rd Station: 2 Pockets, MBO X Mobile Knife for 32 Pages, Pressing Delivery

KÄRCHER ROBO 30 pipe boring machine for pipes, flat material and profiles With this machine, tubes, flat material or profiles can be cut very quickly and accurately in a single pass. can be drilled or milled at an angle or at an angle up to  50° in such a way that filling rods or filling tubes up to 1" can be drilled or milled can be plugged through. With the standard additional clamp for the jaw chuck, you can not only cut pipes, but also transport flat material or other profiles with the feed and at the desired angle up to over Make 50° single-sided holes or through holes. The clamping jaws in the self-centering vice have a recess at the top for flat material. We are unrivalled when it comes to converting to another material! The feed is positioned at 0.1 mm with the counter with absolute or chain gauge. With the ROBO 30, you don't need to set limit switches or cams for ...

Size: 45 x 65 cm Equipments: HSS Gluing Unit Compressor 4 buckle plates

Fully automatic circular saw with miter cut - up to 300 sawing programs - single stroke 1,000 mm, repeatable as desired - Saw blade: HSS 370 x 32 x 3 mm - Blade speed: 5 - 150 1/min - Vice opening 190 mm

offer 22493 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Tapping in steel ST 60 to M 42 - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Drilling spindle speeds infinitely adjustable 60 – 1100 rpm - Right - Left rotation - 3 feeds 0.1 / 0.16 / 0.25 mm/rev - Projection 350 mm - distance drilling spindle – table / base plate 790 / 1210 mm - Table with 2 T-slots 630 x 540 mm - Height adjustable via rack with hand crank - Drive 400 V / 1.8 / 3.5 kW - Space requirement approx. W 600 x H 2050 x D 980 mm - Weight approx. 650 kg - with: - emergency stop button - - Lighting - Quick-change drill chuck 1 - 13 mm - Coolant device - Machine vice - div. 20 pcs HSS – twist drill 8 – 20 mm

Used dyeing machine DM60 from Dyemansion for additive manufacturing for sale. Machine is in very good condition., color range: Unlimited, Color cartridge options: S,M,L,XL, DM Black L-R, throughput time in minutes: 150, Operating temperature: Up to 115°C | Up to 240°F, capacity per pass: E.g. up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200 or almost 1.5 Stratasys H350 build space, process chamber: 80l | 21.1gal, Maximum part size (Ø x H): 390mm x 360mm | 15.3inch x 14.2inch, Dimensions in mm (w x h x d): 950mm x 600mm x 945mm, Compatible Technologies: SLS, SAF, MJF & HSS On request: SLA & DLP & CDLP / CLIP, penetration depth: Depending on the material (approx. 0.2mm for EOS PA 2200)

offer 22054 Specifications: - Drilling capacity - in steel 15 mm - - in aluminium 18 mm - Drilling spindle holder MK 2 - Drilling depth 70 mm - Projection spindle / column 180 mm - Drilling spindle speeds 80 - 4000 rpm - Drive 400 V 0.45 / 0.75 kW - height-adjustable drilling table 280 x 240 mm - Distance drilling spindle / table approx. 360 mm - Distance drilling spindle / base plate approx. 410 mm - Space requirement approx. W 280 x H 1700 x D 600 mm - Weight approx. 85 kg - with : - Quick-change drill chuck 1 - 13 mm - Machine vice - div. Gebr. HSS drill 5 - 15 mm

Oppold Gluing cutter D= 120mm x 59mm x 30mm HSS G&-5043-M31MC VAT not deductible! Special price: net 120,-€

Schneeberger Aries ENP4 CNC Precision Tool Grinding Machine Manufacturer [manufacturer]: Schneeberger Type [ type]: Aries ENP4 Control unit: Fanuc control, 2 CNC axes, simultaneous interpolation 10.4" LCD color touchscreen, RS232 Baujahr[construction year]: 10/2008 Tool and cutter grinder Note: Ideal for tooling and sharpening Optimal grinder for grooving, circumferential, flank, front, rear and flank surfaces Axes Longitudinal travel X mm 400 (CNC) Transverse travel Y mm 260 (CNC) Vertical travel Z mm 300 (CNC) Workpiece rotation A degree free (CNC) C-axis, manual, position indicator integrated in the control unit. Resolution of the measuring system: 0.001°, grinding head ±180° rotatable Center height mm 210 Landing cone ISO50 Spindle Drive power kW 2.2 / 7.5 Double spindle HSK 50 - (2 + 2 grinding wheels) Spindle speed 1/min 9000 Grinding wheel diameter ...

Twist drill, automatic drill GÜHRING UWUK Ø 36 mm HSS DIN 1897 New ! Dimensions: 210 x 60 x 60 mm

Twist drill, automatic drill GÜHRING GHFW Ø 30 mm HSS DIN 1897 New ! Dimensions: 210 x 50 x 50 mm

Twist drill, automatic drill GÜHRING FHFK Ø 30 mm HSS New ! Dimensions: 180 x 40 x 40 mm

Twist drill, automatic drill GÜHRING IGD Ø 34 mm HSS New ! Dimensions: 200 x 40 x 40 mm

Dies, threading dies, hexagonal JBO R1.1/2 HSS Width across flats: 85 mm New ! Dimensions: 98 x 85 x 22 mm

Dies, threading dies, hexagonal JBO R1.1/4 HSS Width across flats: 70 mm New ! Dimensions: 81 x 70 x 20 mm

Cutting dies, threading dies, hexagonal JBO R1 HSS Width across flats: 60 mm New ! Dimensions: 69 x 60 x 18 mm

Dies, threading dies, hexagonal JBO BSP G3/4 HSS Width across flats: 60 mm New ! Dimensions: 69 x 60 x 18 mm

Cutting dies, threading dies, hexagonal EMUGE G3/4 HSS ISO 228 width across flats: 50 mm New ! Dimensions: 56 x 50 x 16 mm

Cutting dies, threading dies, hexagonal EMUGE G1A HSS ISO 228 Width across flats: 60 mm New ! Dimensions: 68 x 60 x 18 mm

Dies, threading dies, hexagonal JBO BSP G1 HSS Width across flats: 60 mm New ! Dimensions: 69 x 60 x 18 mm

Dies, Tapping Dies RAXA 6M R2 HSS Diameter: Ø 105 mm New ! Dimensions: 105 x 105 x 22 mm

Dies, threads PAGUS R1.1/2 HSS Diameter: Ø 90 mm used, tested ! Dimensions: 90 x 90 x 22 mm

Dies, threads RAXA 6M R1-1/4 HSS Diameter: Ø 75 mm New ! Dimensions: 75 x 75 x 20 mm

Dies, threads PAGUS R1 6110-1n HSS Diameter: Ø 65 mm New ! Traces of storage ! Dimensions: 65 x 65 x 18 mm

Dies, Tapping Dies EMUGE R1 HSS Diameter: Ø 65 mm New ! Dimensions: 65 x 65 x 22 mm

Dies, Tapping Dies FW R1-1/4 HSS Diameter: Ø 75 mm New ! Dimensions: 75 x 75 x 20 mm

Taps, single-cut taps, machine taps WMW M36 x 4,0 Total length: 400 mm HSS Number of cutting edges: 4 Number of flutes: 4 Cutting head length: 112 mm Shank diameter: 23 mm square: 22 x 22 mm used, tested ! Dimensions: 400 x 36 x 36 mm

Hob, gear cutter for hobbing machine WMW / PWS Type G Module 3 ( Module 3 ) HSS / Co TGL 29-8002 Bore Ø 40 mm New Dimensions: 110 x 100 x 100 mm

hob, gear cutter for hobbing machine WMW / PWS Type G Module 1,5 HSS / Co TGL 29-8002 Bore Ø 27 mm New Dimensions: 58 x 69 x 69 mm

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 2,25 1575 HSS / Co TGL 29-8002 bore Ø 27 mm New Dimensions: 70 x 70 x 58 mm

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1,5 1844 HSS / Co TGL 29-8002 bore Ø 27 mm New ! Dimensions: 69 x 69 x 58 mm

hob, gear cutter for hobbing machine WMW / PWS Type G Module 2 0175 HSS / Co TGL 29-8002 bore Ø 32 mm New Dimensions: 80 x 80 x 71 mm

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0191 HSS / Co TGL 29-8002 bore Ø 32 mm New Dimensions: 80 x 80 x 71 mm

Twist drill, high-performance drill, drill, 9 pieces WMW diameter: Ø 24,5 / 25.0 / 2x 25.5 / 26.0 / 2x 27.0 / 27.5 / 28.0 mm Cutting material: HSS Surface: Uncoated flute length: 145 / 150 / 160 / 110 / 165 / 185 / 175 mm Coolant supply: External Tool holder: MK 3 Number of cutting edges: 2 Cutting direction: right used, checked ! Dimensions ( Ø 24.5 mm ): 267 x Ø 24.5 mm Dimensions ( Ø 25.0 mm ): 272 x Ø 25.0 mm Dimensions ( Ø 25.5 mm ): 286 x Ø 25.5 mm Dimensions ( Ø 26.0 mm ): 240 x Ø 26.0 mm Dimensions ( Ø 27.0 mm ): 288 x Ø 27.0 mm Dimensions ( Ø 27.5 mm ): 312 x Ø 27.5 mm Dimensions ( Ø 28.0 mm ): 300 x Ø 28.0 mm

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0510 HSS / Co TGL 29-8002 Bore Ø 32 mm New ! Dimensions: 80 x 80 x 71 mm

Offer 23259 Specifications: - Drilling capacity in steel ST 60 30 mm - Thread cutting device up to M 20 - Drilling spindle mount MK 3 - Drilling spindle stroke 160 mm - 9 drilling spindle speeds 98 - 1450 rpm - 3 feeds 0.1 , 0.2 , 0.3 mm/rev - Projection 300 mm - Table with 2 T-slots 500 x 450 mm - max. distance table - drilling spindle 660 mm - max. distance between drill lockers and machined base plate 1600 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 2.3 kW - Space requirement approx. W 600 x H 2100 x D 850 mm - Weight approx. 400 kg - with: - Machine vice - Quick-action chuck - 10 pcs. HSS – Drill 8 – 20 mm

hob, gear cutter for hobbing machine WMW / PWS Type G Module 1,5 0082 HSS / Co TGL 29-8002 bore Ø 27 mm New Dimensions: 70 x 70 x 58 mm

hob, gear cutter for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0234 HSS / Co TGL 29-8002 bore Ø 32 mm New Dimensions: 80 x 80 x 71 mm