hsm 700 used for sale

For vacuum and gas flush, Including tool trolley, Dye: (5x) 148 x 233 mm, Compressed air: 6 - 8 Bar, Power: 3 x 400V, 50Hz, 20kW, Dimensions: 5800 x 900 x 2400 mm, Weight: 3000 kg

General SKU079P422 MakeHaagen+Rinau TypeSO 700 No.8713258 Year of construction1983 Mounted on legscheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume993 Ltr. Motor1.2 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity993 Ltr. Vessel sizesDia. 1000 x 100mm Dished bottomcheck OutletDia. 40mm With jacketcheck Max. temperature160/183 Dgr.C. With propellor stirrercheck Motor0,7/1,2 kW (380 V) Speed mixing shaft425/940 rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) General LocationBarneveld With switchgear(as is) Floorspace2,0 x 1,3 m Total height4,5 m Weight2500 kg Extra Specifications- Mirror polished- Hydraulic lifting cover and stirrerPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalRubberAgrochem ...

General SKU292T670 LocationBarneveld CEcheck MakeVan Tongeren kennemer BV Main Features Motor3 KW Length7000 mm Inlet diameter430 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Tube-typecheck Diameter420 mm Length7000 mm Shaft diameter260 mm Pitch200 mm Inletdia. 430 mm Outletdia. 221 mm Max. temperature100 °C Motor3 kW 219-241/380-420 Volt (Ex) Height between in- and outlet5890 mm MaterialStainless steel 1.4301 (304), Stainless steel 1.4401 (316) With jacketcheck General TypeZ43430 Mach.No.T4404 Year of construction2015 Floorspace0,7x8,9 m Total height0,9 m ATEX designedcheckOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolvents ...

turning diameter: max. 356 mm turning length: 705 mm control: MSX 850 III MAPPS Mitsubishi greates pass round over bed: 923,8 mm Swing dia. over traverse guideway: 755 mm standard turning dia.: 275 mm Main spindle:: max. spindle speed: 4.000 min/-1 power capacity - main spindel: 18,5 / 15 kW spindle nose: JIS A2-8 spindle bearing diameter: 140 mm spindle bore: 91 mm max. bar capacity: 80 mm chucking diameter: 305 mm C-Axis: 0,001 ° Subspindle:: Spindle speed range subspindle: max. 6.000 min/-1 power capacity - Sub spindle: 11 / 7,5 kW spindle nose: JIS A2-5 spindle bearing diameter: 85 mm spindle bore: 43 mm chucking diameter: 210 mm C-Axis: 0,001 ° turret:: number of toolpositions: 12 pos. Number of driven toolspositions: 12 pos. Shank diameter: 26 mm Drill shank diameter: 50 mm Spindle speed - driven tool stations: max. 6.000 min -1 turret change time: 0,25 sec. axis stroke:: x-a ...

Technical data of the pallet rack crossbar: Shelving system: Bito Type: PRO The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Truss Type: PT150M Box profile: 150 x 50 mm Agraffe: 5 HK (hooks) Clear width: 2,700 mm Max. load per pair of trusses 4,250 kg, with the same weight. Distributed load 02x Locking pins, used Design: completely galvanized For securing the longitudinal members Against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Fritsch Cutting Table FT 250 with longitudinal and transverse cutting roller Cutting belt smooth simple, robust design Connection 400V, 16A-CEE plug Dimensions 2500 x 750 x 850 mm, WxDxH Used device

General SKU014G031 LocationBarneveld MakeMachinefabriek Vrieco Zelhem B.V. TypeS 70 RB-S Pressure Working pressure0.2 Bar Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume7000 Ltr. Motor20 KW Specified Features - Conical mixer Conical mixercheck Capacity8700 Ltr (7000 ltr nett) Largest cone diameter2950 mm Cone height4300 mm Dished topcheck Manhole500 mm With stainless steel armcheck Top drivecheck Motor13,0/20,0 kW (380 V) Motor1,1/1,8 kW (380 V) Bottom bearing pintle bearingcheck With jacketcheck Max. temperature120°C Bottom dischargecheck Outlet with sliding valvecheck MaterialStainless steel 1.4541 (321) With jacketcheck General Mach.No.52624 Year of construction1978 Floorspace3,0 x 3,0 m Total height4,3 m Weight±6000 kg Extra Specifications-- RECONDITIONED --Powdered foodsFine chemicalsStarchReconditionedOther chemical ...

Automatic planing and moulding machine WEINIG Powermat 700 Year of construction 2023 Tool arrangement (u-r-l-o-u) 1. Spindle bottom 11 Kw 6,000 rpm 2nd spindle right 11 Kw 7,000 rpm 3. Spindle left together with right spindle driven 7,000 rpm 4. Spindle top 15 Kw 7,000 rpm 5. Spindle bottom 15 Kw 8,000 rpm Feed rate 5 Kw Feed speed infinitely variable 5 - 40 m/min Total connection 60 Kw

Renz Punch 700 Perforator - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Renz Punch 700 Perforator Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Renz Punch 700 Perforator Price: 8750 EUR Download PDF Renz Punch 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Includes a 3:1 perforation tool (4x4mm square) and a hanger cutting module. Side tables are also included. Manufacturer’s description: Perforating machine with a working width of up to 700 mm. Designed for continuous operation and heavy loads. Foot pedal-activated operation. Perforation  ...

The roughing and copying steels are provided with fine adjustments. Template adjustment can be adjusted from the front and rear via fine-threaded spindles. The copy length can be divided into up to 6 sections with different feeds for turning highly profiled workpieces. Drive motor 400V/3kW with electric motor brake Two speed levels can be adjusted via belt belts, within the stages it is possible to work continuously via frequency converter. Speed level 1: 200 - 2000 rpm Speed level 2: 350 - 3400 rpm Center width approx. 1550mm Copy length with bezel approx. 1350mm Bed length approx. 2100mm Feed infinitely adjustable, rapid decline with safety limit shutdown Hydraulic copy carriage with V-lathe steel Spindle with M33 thread and MK3 inner cone Tailstock MK3 and with quick-release device Lots of accessories: Ring bezel with pre-turning steel and insertion aid Four-ja ...

Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine Price: 20000 EUR Download PDF Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spin diamete ...

An optical 3D coordinate measuring machine Keyence is available. Measurement accuracy: +/-10µm, repeatability: +/-2µm, measurement points: 9 million, max. measurement diameter: 300mm, max. measurement height: 200mm, max. measurement dimensions (multiple capture) X/Y/Z: 580mm/300mm/200mm, max. workpiece weight: 50kg, table tilt: 45°. Including control and evaluation software, rotary table and calibration accessories. Documentation available. An on-site inspection is possible. The image is an example.

CONTROLS   CNC controls SLM ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2600 mm   space requirements -front/back-: 1200 mm   total height: 2700 mm 3D metal printer Machines in excellent condition serviced annually by the manufacturer (service reports available). ... Accessories: - HRS050 L/W cooling package, - PSM100 V3 sieving station, - BPH280 handling unit and bottle lift, - Material change kit, - SLM280 2.0 complete including PSM100, - Powder hopper, - Substrate plates (1.2709 & AlSi10Mg), - Additional filter housings and filter elements, etc. Build volume: 280 x 280 x 365 mm minus substrate plate height Machine configuration: Single optic, 1 x 700W Build rate: up to 113 cm³/h (material dependent) Laser lifespan: 1500 h Variable layer thickness: 20 μm - 90 μm Min. feature size: 150  ...

Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part removal ...

Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part removal ...

Key data: 220 kN, 8 mm, 3050 mm

Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part removal ...

- Tool eye - SMW 3 chuck 630-165 mm - SMW Steady rest 85 - 350 mm - LNS Chip conveyor - DORMATEC Air Filter 30 m3

Punching Laser Machine Trumpf TruMatic 7000 Year of construction 2010 Rexroth IndraMotion MTX Controller Laser type: TruFlow 4000 Laser power: 4000 W Working Area:: Punching operation without repositioning: X 3,050 mm Punching operation: Y 1,550 mm Laser operation: X 3,050 mm Laser operation: Y 1,550 mm Combined operation: X 2,500 mm Combined operation: Y 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 280 kg Punching force: 220 kN X-axis speed: max. 100 m/min. Y-axis speed: max. 60 m/min. Simultaneous speed: max. 116 m/min. Maximum stroke rate:: Punching (E = 1 mm): max. 1,200 1/min. High Light: max. 3,000 1/min. Tools:: MultiTool tool change time: 0.3 sec. Number of tools/clamps: 21 /4 pieces Parts removal:: Workpiece size at the part removal flap (punching operation): 500 x 500 mm Workpiece size at the part removal ...

Offer 26117 Technical data: - Worktop approx. W 2000 x D 700 mm - Worktop thickness approx. 45 mm - Working height approx. 850 mm - 2 pcs. Roller bearing drawers - Pull-out of the drawers approx. 80 % - Drawer dimensions approx. W 500 x D 500 x H 150 mm - 2 cupboards with doors - Space requirement approx. W 2000 x D 700 x H 850 mm - Weight approx. 100 kg

Gearbox, planetary gearbox for hydraulic motor, axle drive, geared axle drive, wheel drive, double planetary gearbox -Manufacturer: Chiaravalli, planetary gearbox type CHPL 7003 CPC PAM132 B5 -Translation: i: 53.8 -Hollow shaft: Ø 38 x 80 mm -Bolt circle: Ø 265 mm M12 -Number: 3x gearboxes available -Price: per piece -Dimensions: 630/300/H300 mm -Weight: 102 kg/pc.

CONTROLS   CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC-   X-axis travel: 750 mm   Y-axis travel: 500 mm   Z-axis travel: 600 mm TABLE   table surface (left-right): 1000 mm SPINDLE / HEAD   spindle revolutions (max): 10000 /min   tool fixture: ISO SK 40 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 6000 mm   space requirements -front/back-: 4500 mm   total height: 2800 mm   total weight approx.: 8000 kg Pendulum machining unit 2 x 750 mm Machine in very good and well-maintained condition Only used for machining aluminum or plastic Features: - Various tool holders - 3R clamping system on each side (see photo) - Work area light

Code: 0015 Brand: FRAVOL - ITALY Model: RAPID RX 700 - CE Standard Automatic electronic edge bander for EVA - PUR - POLYURETHANE glue, with grinding unit for applying Pvc, Abs , melamine , veneer , solid strip and roll edges, for joinery workshops, custom furniture, naval furniture, doors, panels, kitchen furniture, bathroom furniture - CE Standard Panel thickness min/max mm 10/120 Panel length min mm 140 Panel width min mm 60 Edge thickness mm 0,4 - 16 Variable feed 10-20 mt/min Automatic presser lift Composition: Touch Screen electronic control 10,7" colour Controlled axis infeed guide Group 2 incoming grinders for perfect panel grinding - Motors Kw 2,2 - Rpm 6000 - Diamond tools mm 100 x 120 x 30 Infrared lamp 0-600 degrees - Watt 600 Cooling anti-adhesive spray system Edge height mm 120 Automatic edge loader Universal gluing unit with pre-melting unit for po ...

Code: 0221 Brand: CENTAURO Model: CO 700 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames , doors, plastics, aluminum, composite materials and various - CE Standard Technical data: Diameter of flywheels mm 700 Width of flywheels mm 40 Max cutting height mm 435 Height of worktable from ground mm 940 Min/max blade length 5040/5180 Motor power Hp 4 Diameter of suction mouth mm 100 Tilting table Overall dimensions: mm 1350 x 800 x 2300 h Weight kg 400

Coming soon! Sheeting machine Fully automatic machine with computer control and TOUCH display Band width: approx. 65cm Band length approx. 180 + 180cm Different belt speeds Coasting speed 56m/min Roll gap 0.5-55mm Dough block processing up to 20kg with flour with reel RIGHT with base frame Machine completely stainless steel - Tested, cleaned, belts NEW

A portable optical Creaform 3D laser scanner is offered. Accuracy: 0.03mm, volumetric accuracy: 0.02mm + 0.06mm/m, resolution: 0.05mm, measurement rate: 480000/s, scanning area X/Y: 275mm/250mm, stand-off distance: 300mm, depth of field: 250mm, weight: 0.85kg. Including HP ZBook, Windows 10 and approx. 50 packs of positioning targets. Calibration at Creaform passed on 16 December 2020. Inspection possible by appointment.

A Hwacheon CNC lathe is offered. Max. turning diameter: 680mm, swing over bed: 900mm, max. turning length: 1986mm, chuck diameter: 380mm, max. bar capacity: 116mm, max. spindle speed: 1800rpm, spindle power: 37kW/30kW, max. spindle torque: approx. 3071Nm/2493Nm, tool turret: 12 stations, tool interface: BMT-75, X/Z-axis travel: 360mm/2050mm, X/Z-axis rapid traverse: 18m/min, coolant tank capacity: 300l, control: Fanuc 0i-TF. Equipment: C-axis, driven tools, automatic in-process tool measurement, programmable tailstock and programmable quill, C-axis spindle clamp, chucking pressure monitoring, centralized lubrication and hinge-belt chip conveyor with chip container. Control ON: approx. 15961h, machining time: approx. 4258h, total part count: 34601. Weight: approx. 15000kg. Documentation available. Inspection possible by appointment.

: 6 St. : 100 kg range L-W-H: 705 x 736 x 1019 mm weight: 126 kg Furnishing: - Tool cabinet with 6 drawers / ball bearings 75 - 125 - 150 - 150 - 200 - 200 mm - drawer extension 88% - Usable dimensions inside: 600x600 mm - lockable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0459 Brand: SICMA - ITALY Model: F 700 N - CE Standard Spindle moulder for milling and jointing operations on wood, plastics, composites and various other materials – CE Standard Table dimensions 1000 x 800 mm Rotational speed 3000/4500/6000/8000 rpm Max diameter 250 mm Mechanical spindle height indicator Motor 4,5 Hp Aluminium guides Safety guard N° 2 suction inlets diameter 120 mm Overall dimensions mm 1100 x 800 x 1100 h Weight kg 800

Torque: 12 Nm volt: 144 V ampere: 11 A power capacity: kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 12 Nm 3 Phase 11A 8 Poles Class F 2000/min 144V Pulse Coder The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 300 mm : 500 m³/h : pa Filter capacity: m² : : The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 700 mm y-travel: 600 mm z-travel: 600 mm table surface area: 630 mm : 360 Grad angle of table min./max.: 45/20 Grad turning speeds: 6300 U/min control: Pfilips type: CNC 432 Tool changer: spindle taper ISO: 40 chip conveyor: total power requirement: 27 KVA weight of the machine ca.: 5,8 t dimensions of the machine ca.: 4,1x2,3x2,4 m Year of manufacture probably 1989 Five-axis machine + swivel head Interface The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. ...

Torque: 23 Nm volt: 146 V ampere: 20 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Model 205 23 Nm, 3Phase, 20A, 8Poles, Class F, 2000/min 146V, Pules Coder The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Torque: 12 Nm volt: 145 V ampere: 15 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Model 105/3000 12Nm, 3Phase, 15A, 8 Poles, Class F, 3000/min, 145V, Pulse Coder The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ampere: 20 A volt: 146 V Torque: 23 Nm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Modell 205 TRQ 23Nm 3 Phase Amp 20A 8 Poles INSULATION Class F 2000/min 146 V Pulse Coder The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 23 kW volt: 127 V ampere: 33 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Model 205/3000 23kW 3Phase 33A 8 Poles Class F 3000/min 127V Pulse Coder The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 29 kW volt: 129 V ampere: 29 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Model 30/2000 29kW, 29A, 3Phase, 8Poles Class F 2000/min 129V Pulse Coder The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Torque: 12 Nm volt: 144 V ampere: 11 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Model 10 12Nm, 3Phase, 11A, 8 Poles Class F 2000/min 144V, Pulse Coder The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Torque: 12 Nm volt: 145 V ampere: 15 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Model 105/3000 12 NM, 3 Phase, 15A, 8 Pulse Class F 3000/min 145 V Pulse Coder The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Presse à injecter NEGRI BOSSI 850T Vector type V850-7000 Année : 2011 Force de verrouillage : 850 T Diamètre vis : 110 mm Pression d’injection : 1670 bars Dimensions des plateaux : 1670 x 1580 mm Distance entre colonnes : 1140 x 1020 mm Course d’ouverture : 1200 mm Epaisseur moule mini : 400 mm Moteur de dosage électrique Interface robot

grinding diameter: 1100 mm grinding length: 7000 mm swing diameter: 1100 mm grinding diameter - min.: 350 mm grinding wheel size: 915 x 100 x 304,8 mm grinding wheel turining speeds: 400 - 1200 U/min grinding motor: - kW spindle headstock drive: - kW Control: Siemens 840D SL workpiece weight max.: 18000 kg total power requirement: 110 kVA weight of the machine ca.: 68 t dimensions of the machine ca.: - m - 2011 retrofitted with new eletctric/mechanic and new CNC - CNC System Siemens 840D sl - Lismar Measuring System - Chuck dia 700mm - 4 steadies - Tailstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New Batch Pasteurisers custom made on request. offers new Batch pasteurisers for the Food and beverage industry. Our BPT Series is capable of Milk Pasteurisation, Ice cream mixing, Ice Cream Fermentation, Sauces, Brewery industry,etc., Applications:, - Dairy Processing: Most commonly used in the dairy industry to pasteurise milk and milk products., - Cheese Production: Used before cheese-making to ensure safety., - Ice Cream Production: Pasteurises the base mixture before it is churned into ice cream., Advantages of Batch Pasteurisation:, - Cost-Effective: Often less expensive than continuous pasteurisers for small to medium operations., - Flexibility: Suitable for small batches or varied products and recipes., - Quality Control: Allows for greater control over the pasteurisation process., Volume capabilities (litres): 700, Control panel: Stainless steel Control box, Controls, Thermomete ...

Manufacturer: Trumpf Year of Manufacture: 2005 Model: TrumaBend S 700-45 Type of Machine: CNC Hydraulic Press Brake Technical Specifications: - Working Length: 4,550mm - Pressing Force: 7,000 kN (approximately 700 tonnes) - Weight: 49,000 kg - Oil Quantity: 700 liters - Operating Voltage: 3 x 400V AC, 50Hz - Control Voltage: 24V - Control Type: ModEva 12S (Cybelec) - Main Fuse Nominal Current: 200A - Connected Load: 69 kW - Distance Between Machine Frames: 3,500mm - Maximum Bending Length: 4,550mm at a bending depth of 590mm - Bending Arm (without tool): 490mm. Obstruction edge protrudes 300mm from the bending arm. - Maximum Bending Depth at 3,500mm Length: 1,750mm for single bends, 1,250mm for Z-bends Hours are being check, but it was used in 2x shift operation. Will be available end of the year. No tools included, only the machine The machine has been running continuously for  ...

Creasing & Perforating machine, Kroll, Model 700, Year 1960´s, Working width 700 mm, Tools some tools, but not worth mentioning, Available direct, Working width: 700 mm, Tools: some tools, but not worth mentioning

General SKU261Y385 CEcheck Pressure Working pressure2.5 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume700 Ltr. Motor45 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacityeffective cap.: 150—500 l. (700 l.) Dished bottomcheck With covercheck Top connectionscheck OutletDN80 With jacketDouble jacket, volume 65 l. With propellor stirrercheck Motor5,5 kW/4 kW, 400 V Speed mixing shaft7—36 rpm / 17—86 rpm With homogenisercheck MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) With jacketcheck General MakeFryma Koruma Serial2481 TypeDisho 170/700 Year of construction1998 Mounted on legscheck With switchcheck Floor space2,00 x 3,00 m Total height3,70 m Extra SpecificationsVolume 730 l., allowable pressure -1/2,5 bar, allowable te ...

roll diameter: 700 mm roll length: 2200 mm rolls drilled: Kernbohrung Nip adjustment: hyraulisch 0 total power requirement: 160 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: max. 356 mm turning length: 705 mm control: M730 UM Mapps CELOS greates pass round over bed: 920 mm Swing dia. over traverse guideway: 742 mm Main spindle:: turning speed range - main spindle: 4.000 min/-1 power capacity - main spindel: 18,5 / 15 kW spindle nose: JIS A2-8 spindle bore: 80 (91) mm C-Axis: 0,001 ° Subspindel:: Spindle speed range subspindle: 6.000 min/-1 power capacity - Sub spindle: 11 / 7,5 kW spindle bore: 43 mm C-Axis: 0,001 ° axis stroke:: x-travel: 260 mm z-travel: 795 mm Y - Axis: +/-50 mm rapid traverse ( X / Y / Z ): 30 / 10 / 30 m/min turret:: number of toolpositions: 12 pos. Schank height for square tool: 25 mm Drill shank diameter: 50 mm turret change time: 0,27 sec. Driven Tool Positions:: Spindle speed - driven tools: max. 10.000 min -1 power capacity - driven tools: 5,5 / 4,2 kW total power requirement: 41 kVA weight of the machine c ...

turning diameter: max. 366 mm turning length: 705 mm control: M 730 BM MAPPS IV greates pass round over bed: 920 mm Swing dia. over traverse guideway: 742 mm Main spindle:: turning speed range - main spindle: 4.000 min/-1 power capacity - main spindel: 18,5 / 15 kW spindle nose: JIS A-8 spindle bearing diameter: 140 mm spindle bore: 91 mm max. usable bar diameter: 80 mm chucking diameter: 250 mm Subspindel:: Spindle speed range subspindle: 6.000 min/-1 power capacity - Sub spindle: 11 / 7,5 kW spindle nose: JIS A2-5 spindle bearing diameter: 85 mm spindle bore: 43 mm max. usable bar diameter: ( - ) mm chucking diameter: 170 mm axis stroke:: x-travel: 260 mm z-travel: 795 mm Y - Axis: +/-50 mm rapid traverse ( X / Y / Z ): 30 / 10 / 30 m/min turret:: number of toolpositions: 12 pos. tool taper: BMT 60 Schank height for square tool: 25 mm Drill shank diameter: 50 mm turret change time: ...

length: 700 mm width: 700 mm height: 630 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 1300 mm table load: 7.000 kg Frontal Loading Center (A): 150 mm Side Loading Center (B): 150 mm Rotating speeds: 0,1 - 0,9 UpM T-slots: 6 x M24 Tilt Angle: 90-180-100 ° Tilting Speed: 30 sn min./90° weight of the machine ca.: 3.050 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 700 mm table width: 400 mm x-travel: 450 mm y-travel: ? mm total power requirement: 0 kW weight of the machine ca.: 0,36 t dimensions of the machine ca.: 1,210,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.