hsm 700 used for sale

Roller conveyor, conveyor belt, roller track -Roller width: 700 mm -Conveyor length: 5020 mm -Roller diameter: 80 mm -Axle spacing: 100 mm -driven: via belt -Geared motor: 0.55 kW -Speed: 12.6 m/min -Number: 1x roller conveyor available Price: per piece -Dimensions: 5380/1050/H450 mm -Weight: 450 kg

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, bus modules, bus module -Manufacturer: Siemens Simatic S5 Bus Module Ovp -Type: 6ES5 700-8MA11 -Number: 2 modules available -Price: per piece -Cardboard dimensions: 165/100/H40 mm -Weight: 0.3 kg/pc.

Control board, output board, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, AS-Interface actuator module, AS-Interface sensor module, AS-Interface sensor/actuator module, sensor/actuator module, connection, electronic modules, PLC controller, digital input, single block, double block -Manufacturer: Siemens, Simatic C1 Double Block Electronic Module -Type: 6EC1 700-3A -Quantity: 1 module available -Dimensions: 65/20/H100 mm -Weight: 0.1 kg

Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders, clamping cylinders -Manufacturer: Festo, standard cylinder type DNC-100-700-PPV-A -Lifting stroke: 700 mm -Piston: Ø 100 mm -Piston rod: Ø 25 mm / M20 x 1.5 -Max. Pressure: 10 bars -Dimensions: 925/110/H165 mm -Weight: 12 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 211 mm, without take-up shaft -Transport width: 700 mm -Shaft: Mounting Ø100 mm, hole spacing 145 mm M12 -Quantity: 1x transport roller available -Total dimensions: Ø 213 x 700 mm -Weight: 46 kg/piece

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø200 x 210 mm -Item no.: 843 329 65 -Heating power: 7000 W -Voltage: 230-400V -Dimensions: 285/215/H185 mm -Weight: 3.4 kg

drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, full-extension ball guide, roller slide guide -Drawer rail: roller slide guide length 700 mm -Load capacity: kg -Quantity: 3x set available -Price: per set -Transport dimensions: 700/70/H45 mm -Weight: 6,3 kg/set

Tray trolley, paint drying trolley, specialized transport trolley, transport trolley, platform trolley, carrying arm trolley -Hardware trolley: Heavy-duty paint drying trolley with 15 levels -Total length: 1660 mm -Total depth: 700 mm -Total height: 2040 mm -Quantity: 1x transport trolley available -Weight: 93 kg

Shock absorber, gas spring, shock absorber, start-up damper, impact damper -Manufacturer: Bansbach, gas pressure spring easylift type HONOF32-700-1447-001 050N -Piston: Ø 22 mm -Total length: 1465 mm -Piston rod: Ø 10 x 700 mm -Number: 2x gas pressure spring available -Price per piece -Dimensions: Ø 22 x 1465 mm -Weight: 1.0 kg/piece

Tray trolley, paint drying trolley, specialized transport trolley, transport trolley, platform trolley, carrying arm trolley -Hardware trolley: Heavy-duty paint drying trolley with 16 levels -Total length: 1200 mm -Total depth: 700 mm -Total height: 2000 mm -Number: 9x transport trolleys available -Price: per piece -Weight: 60 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog assembly, analog module, analog output, interface module, bus module, bus module -Manufacturer: Siemens Simatic S5 bus modules -Type: 6ES5 700-8MA11 -Number: 9x module available -Price: per piece, minimum order 2 pieces. -Dimensions: 165/90/H40 mm -Weight: 0.3 kg/piece

clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, cranked clamps -Manufacturer: AMF, clamping iron DIN 6314-26x200 2 pieces -Order No.: 70094 -Clamping bracket: 200/70/H30 mm -Groove: 80 x 26 mm -Price/Delivery: complete -Transport dimensions: 200/70/H60 mm -Total weight: 5.2 kg

container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turntable and tilting table, welding turning device, welding turntable tilting table -Handover: in current condition as viewed -Condition: without drive motors / control, see photos -Welding rotating device: pivoting -Turntable: Ø 700 mm -Projection: 930 mm -Transport dimensions: 1240/730/H1640 mm -Weight: 643 kg

Roller conveyor, roller track, powered roller conveyor, roller track -Roller conveyor: driven, with sensor switch / without control -Drive motor: 0.37 kW -Speed: 18 m/min -Roller width: 700 mm -Roller diameter: 64 mm -Axle spacing: 200 mm / adjustable -Conveying length: max. approx. 2730 mm -Overall dimensions: 2800/775/H515 mm -Weight: 201 kg

PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S5 Digital Input Digital Input 2 pieces with bus module -Type: 6ES5 421-8MA11 / 6ES5 421-8MA12 -Bus module: Siemens 6ES5 700-8MA11 -Number: 1x double module available -Dimensions: 165/100/H125 mm -Weight: 0.7 kg

Workbench, work table, assembly bench, assembly table, worktable, mobile workbench, sewing machine table -Work table: Electrically height-adjustable work table, solid construction with casters -Tabletop: 1400 x 700 mm -Height: 810 to 1180 mm -Drive motor: Baifu 51K120GU-CM-P 230V 120W -Base: 4 swivel casters with locking brakes -Transport dimensions: 1400/700/H810 mm -Weight: 62 kg

Workbench, work table, assembly bench, assembly table, work table -Manufacturer: Lista, workbench with vise / solid construction with drawers -Worktop: approx. 1250/700/H850 mm -Drawers/Cabinet door: lockable, without key / Layout/height see photos -Vice: Heuer Front, height-adjustable and rotatable -Clamping jaws: 180 x 30 mm, clamping range 230 mm -Transport dimensions: 1250/960/H1140 mm -Weight: 138 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagon with single-axle turntable steering -Platform: 7000/2000/H730 mm -Load capacity: 15 t -Tires: Solid rubber dual tires 425/150-305 see photos -Overall dimensions: 8665/2000/H730 mm -Transport dimensions: 7000/2000/H730 mm -Weight: 1940 kg

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: Plan, heavy-duty transport wagon with 1-axle turntable steering -Platform: 7000/1500/H735 mm -Load capacity: 15 t -Tires: Solid rubber dual tires, 4 pieces, 425/150-305, see photos -Overall dimensions: 8570/1500/H735 mm -Transport dimensions: 7000/1500/H735 mm -Weight: 1840 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Stamp: for Herrenknecht tunnel boring -Piston diameter: approx. 150 mm -Piston rod: Ø 110 mm -Stroke: 700 mm -Usable: universal -Number: 2 cylinders available -Price: per piece -Dimensions: 950 x 300 mm -Weight: 150 kg/piece

Manufacturer: Bürkle, Type: RCLS 700, Year: 2014, Finished product: Betonplatten, Work piece width min-max mm: 700, Min.-max. workpiece height in mm: 3 - 80, Min.-max. workpiece length in mm: 400, Feeding speed min-max m/min: 2 - 10, Control: Bürkle, Inlet conveyor: no, IR-Trockner 1: 20 x 3 kW, Transport 1: Band/Stange, Lackwalze 3: RCLS 700, UV Trockner Lampen/Watt: 120, UV Trockner Lampen/Watt: 120, Paint rollers overall: 2, UV Trockner gesamt: 2, IR-Trocker gesamt: 1, UV Trockner gesamt: 2, UV dryer: Easy Cure UV 700, Conveyor belts: 0, FREE TEXT: einschl. Dosierwalzenheizung, Year :2014

Manufacturer: Comil, Type: Astro 700, Hochschränke und Hänger: 680, Work piece width min-max mm: 300 - 2500, Min.-max. workpiece length in mm: 300 - 1300, Min.-max. workpiece height in mm: 800, Working width min min mm: yes, Hydraulical/pneumatical: yes, Min.-max. pressing length in mm: 1300, Min.-max. pressing depth in mm: Pressbalken, Cylinder horizontally: no, Pre-assembling conveyor: 22,5, Feeding speed continous adjustable: jyes, Distribution carriage: yes, Pufferband Länge mm: automatisch, Assembly line 1 tall cabinets: 6, Discharge belt roller conveyor height: 7, Machine rigging: 2860, Press power kg /cm²: 7500, Weight approx. kg: inkl. Auslaufband 800 X 200,

Transnorm roller curve conveyor 90°-770-700 IR800 Make: Transnorm Type: TS 2712 Year of construction: 1996 Conveying speed V= 0,58 m/sec Conveying angle: 90° Roller width: 600 mm Outer width/nominal width (NB): 680 mm Inner radius: 800 mm Drive chain drive Rollers: plain bearings with conical plastic molded part Transport weight: 130 kg on Euro pallet Transport mast: L x W x H = 1800 x 900 x 450 mm Scope of delivery: without supports (please enquire if required) Optionally available supports Side guides Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Antrieb: SEW Getriebemotor Running direction: links/ rechts nominal voltage: 380-500V Construction year: 1994 Drive type: Kette condition: very good (used) Nominal / inner radius in mm: 800 Nominal / outside width in mm: 770 Roll width in mm: ...

Pressure total: 800 ton Ram stroke: 700 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1500 mm Free frontal opening L-R: 3800 mm Free lateral opening F-B: 1450 x 1100 mm Table surface area : 3500 x 1900 mm Slide area: 3500 x 1900 mm Die cushion capacity in table: 150 ton Die cushion stroke: 250 mm Die cushion pad area: 2780 x 1570 mm Number of strokes: 7 - 18 s.p.m. Required power: 120 kW Height over floor approx.: 9510 mm Weight of machine approx.: 260 ton

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering -Platform: 7000/2000/H910 mm -Load capacity: 21 t -Tires: Vorwerk 645/300-410 solid rubber -Drawbar length: 1900 mm -Transport dimensions: 7000/2000/H910 mm -Weight: 2630 kg

Linde used chirogenic spiral food freezer Crygoline series type XF 700.

Description 2nd folding unit MBO T 700-2-68-4 from 2009 with high-speed roller table and 4 Combiplates 68cm with downstream single knife shaft thru-axle

General SKU098F495 MakeProvatech GmbH (Waldner) TypeVakuum Trockenschrank VTP 700/930 :Ex: Year of construction1997 LocationBarneveld Pressure Working pressure0.025 Bar Vacuum possiblecheck Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume260 Ltr. Surface1 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housing(1.4571) Stainless steel traysMirror polished Heating surface1,0 m² Drying chamber capacity260 Ltr Drying chamber sizes700x445x930mm Max. temperature80°C. With jacket27 Ltr. Max. temperature80°C. Number of trays4 (+ bottom) Tray sizes500x400mm Distance between the trays150mm With 1 door, With electric (water) heating Connection for the vacuum pumpcheck With vacuum pumpmake SIHI Motor± 0,25 KW MaterialStainless steel 1.4571 (316Ti) With jacketcheck General With switch(as is) Floorspace1,9x1,2 m Tot ...

Description R+S Verpackungstechnik Side sealing machine FAS 700 with shrink tunnel VAST 652 from 2013/2014 1 Minitec conveyor belt built in 2013, L approx. 5,000 mm, W 200 mm, w. sideways Guide rails, 1 conveyor belt R+S TB 2000, built in 2014 SN RS-46010, L 2,000 mm, W 350 mm, base frame height-adjustable, w. lateral. adjustable guide rail, 1 side welder R+S VAS700 built in 2014, SN RS-45943 1 shrink tunnel R+S VAST652 built in 2013 SN RS-47085 1 conveyor belt R+S TB 2000 built in 2014 SN RS-46004 L 2,000mm, W 350 mm, w. 2 sides adjustable guide rails, height-adjustable base frame

Transnorm belt conveyor GF 3250-700-600 RA2470 Technical data: Conveyor length (NL): 3250 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): 0.5 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 1994 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 3250 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Ampere: 1,30 scope of delivery: without support ...

Digital Microscope Controller for VHX-7000 Series Console for VHX-7000 Camera Unit High Performance Camera VHX 7020 Tripod (motorized in XYZ 100mm) VH Zoom Lens 20x-200x Tripod adapter for VH-Z20 Polarization adapter for VH-Z20 3D Measurement Software for VHX-7000 Bracket for VHX-S770E/750E Viewing by telef. Arrangement possible used, bought as seen, without warranty Price = 53000.00 € + VAT Invoice due upon readiness for shipment or delivery

A dough sheeting machine Fritsch for folded dough sheets for subsequent processing is available. Belt width: 700mm, working width: 650mm, roller gap range: 0.3mm-50mm, roller diameter: 98mm, max. dough block weight: approx. 20kg, belt speed: 50m/min, machine dimensions X/Y/Z: approx. 3300mm/1250mm/1550mm, weight: approx. 500kg. An on-site inspection is possible.

Cutting height: 195 mm saw-blade dia.: 550 mm Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 700 , 1670 , 110

Screw diameter: 110 mm Injectable volume / Shot volume: 4750 cm3 Injectable weight / Shot weight: 4320 g Injection pressure: 1670 bar Column passage / Bettween tie bar: 900 x 1000 mm Mold Thickness /Tickness tie bar: 400-1000 mm Opening stroke: 1000 mm Ejection stroke: 350 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor

This 3-axis Akira Seiki RMV 700 APC was manufactured in 2013. It features an X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine includes a robust table size of 700 mm x 400 mm with a maximum load capacity of 160 kg. If you are looking to get high-quality machining capabilities, consider the Akira Seiki RMV 700 APC vertical machining centre we have for sale. Contact us for further details.

COMPLETE WASTE WOOD DISPOSAL LINE RUDNICK & ENNERS – built in 2011 For sale is a complete waste wood disposal plant of the Rudnick & Enners brand, built in 2011. The line consists of 20 positions and was used for the automatic removal, sorting and processing of rinds, chips and waste wood in a sawmill. The plant has a modular design, dismantled, in very good condition and immediately available. Technical Overview – Items 1 to 20 01 – TKF offset by reducer, W 600 mm 02 – Viborinne 1 trimming line, L 13.0 m, W 650 mm 03 – Viborinne 2-trimming line, L 15.0 m, W 650 mm 04 – Viborinne creel line, L 8.50 m, W 500 mm 05 – Viborinne 1-gang line, L 10.0 m, W 500 mm 06 – Viborinne 2-creel line, L 9.0 m, W 500 mm 07 – Viborinne creel roller table, L 7.50 m, W 500 mm 08 – Viborinne resawing line, L 11.0 m, W 650 mm 09 – Viborinne recut li ...

Ref. №: 4222 Portion cutting machine for meat with/without bone, bacon, ham, diary products, fish, vegetables Cutting chamber size (LxWxH): 700 x 220 x 240 mm Cut-off length: 0-70 mm Machine width: 90,0 cm Machine length: 200,0 cm Machine height: 145,0 cm Motor power: 3,4 kW Operating voltage: 380 V, 50 Hz

Untha LR 700 Machine is like new, was not used, has only 1 hour of operation. For sale is a UNTHA LR 700, a robust and powerful single-shaft shredder for wood waste, chipboard, MDF and production residues. The machine impresses with its compact design, high efficiency and reliable continuous operation – ideal for carpentry, wood processing and recycling. Technical data: • Drive power: 18.5 kW • Rotor length: approx. 700 mm • Rotor diameter: approx. 250 mm • Hydraulic Gate Valve 2 • Weight: approx. 1,500 kg • Proven UNTHA cutting system The LR 700 is known for its durability, low-maintenance technology and uniform shredding results. Machine is immediately ready for use For 25 years, we have specialized in the sale of woodworking machinery. Each of our machines is extensively tested before sale to ensure the highest quality and reliability. The satisfact ...

The Eriez drum separator comprises a magnetic element which is fixed on a steel shaft to form a magnetic unit and which remains stationary during operation. The magnetic unit is completely enclosed in a rotating cylindrical stainless steel shell.

Transnorm Rising falling Incline belt conveyor with leading belt GF 800+1275+1005-700-600 RA2499 Technical data: Conveyor length (NL): 2980 mm ( 830 +150 mm arch + 1200 mm riser segment + 800 mm leading ) frame width (NB): 700 mm, 900 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 2980 ( 800 + 1275 + 1005 ) Nominal / outside ...

ID3780 STS Scheltzke MS2-700 E-A-AUT year/Baujahr 2021 approx. 900 hours/hours Fully automatic mixing station, continuous twin-batch mixing plant, total batch capacity (mixers 1+2): 36 m³/h, total power consumption: approx. 30 kW Fully automatic mixing station, continuous double-batch mixing plant, total batch output (mixer 1+2): 36 cbm/h, total power consumption: approx. 30 KW

Machine tool manufactured in 1999. This STAHLI FLP 700 features a copper plate with a diameter of 700 mm. If you are looking to get high-quality machining capabilities, consider the STAHLI FLP 700 machine we have for sale. Contact us for further details.

Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7

WITTMANN SPRUE WP80 X-100 Y-700 Z-90

max. format 68 x 104 cm Year of construction 2003 Navigator Control Rapidset - motorized format adjustment of the folded pockets Pallet feeder FP 700 Vaculift Vivas (Vacubelt + Vacutable) 1st station: 6 fold pockets 68 cm Downstream knife shaft 2nd station: 4 fold pockets 68 cm Downstream knife shaft Gluing device HHS for cold glue Shed Extension ASP 66-2 ME Delivery date: immediately from stock

WITTMANN SPRUE WP80 X-100 Y-700 Z-90 ROBOT

Engine Brand: MTU, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Injection Type: ECU (Electronic Control Unit) , Generator KVA: 700 , Generator Hz: 50 , Generator Volts: 230/400 , Generator Amps: 1010 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/mtu-12v1600g10f-generator-700k va-used/589, , = More information =, , Type number: 12V1600G10F GENERATOR 700KVA

Table milling machine fields type F 700 M Technical data: - Milling spindle swivel: 90 degrees / 45 degrees - Spare milling spindle: included

Used NFC juice extraction line. New 2018. Line capacity: 500–700 L/h Suitable for cold-pressing juice from most fruits and vegetables. The line includes: -Belt press made by Stalmont, type: PT 1000 Technical descibtion: The PT-1000 belt press is a device used for pressing apple must. This process takes place between the belt and the press's rollers, which are arranged appropriately. The pressed juice is pumped into the pasteurizer tank. Kebi N Hefglxxemm Helt Technical specifications: Capacity: up to 900 kg of apples/h (approx. 700 l/h) Juice yield from pressed apples up to 75% Installed power: 1 kW 230V Dimensions L x W x H (mm): 2230x1190x1250 Weight: 700 kg Belt width: 500 mm Belt speed: adjustable Juice tank with a sieve (mesh diameter = 1 mm) Juice pump -Grinder, -Crate-pallet maker. Very good condition. Equipment is well-maintained and clean. Regularl ...

Continuous fusing press for sale. Working width: 700mm, factory overhauled: April 2012, control: PLC control. Equipped with infeed conveyor, discharge conveyor. Weight: approx. 650kg, overall dimensions X/Y/Z: approx. 3350mm/1250mm/1200mm. Inspection possible by appointment.