hs used for sale

General SKU429U1376 MakeFlottweg LocationBarneveld TypeZ42 Z3L Main Features MaterialStainless steel Motor22 KW Specified Features - Decanter 3-Phase decantercheck Screw diameterMax. 420 / min. 226 mm Screw length1245 mm InletDia. 46 mm Liquid outlet110 mm Solids outlet700 x 260 mm Motor18,5/22 kW, 400 volt With variable speed drive1465/2935 rpm With hydraulic unitcheck Motor11 kW, 380 volt, 1460 rpm MaterialStainless steel 1.4307 (304L) General No.F 738 Year of construction1978 Mounted on framecheck With switchcheck With switchgear(as is) Floorspace1,4 x 2,8 m Total height2,1 m Weight3000 kgConsumer wasteStarchBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersOrganicsPaper & otherE-waste & metalAnimal feedDyes & pigmentsPlastic & rubberMinerals & inorganicDecantersFlottwegIndustries > Recycling > Consumer wasteIndustries > Food & Feed > StarchIn ...

sheet width: 3100 mm plate thickness: 6,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Motorized backgauge with digital display Manual kerf adjustment Variable cutting length Cutting edge illumination New blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU366W1272 LocationBarneveld CEcheck MakeFerrum TypeHSZ PH 1000 Main Features MaterialHastelloy Motor30 KW Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity215 kg Basket sizesdia. 1000x600 mm Max. loading weight215 kg Motor30kW, 380 volt, 1475 rpm, (Ex) Max. basket speed1500 rpm With scrapercheck Hydraulic operatedcheck With hydraulic unitOelhydraulilk SA 1565 with 2 pumps/motors Motor0,25kW, 400V, 1355 rpm (EX) (2x) Inletcheck Solids outletDia 250 mm Liquid outletDia. 100 mm MaterialStainless steel 2.4602 (Hastelloy C-22) General No.Z-175886 Year of construction2007 Mounted on foundation platecheck Weight5000kgGeneric medicinesPeeling centrifugesBiotechnologyCatalysts & fillersFeed additivesCosmeticsFood additivesSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalAPIMinerals & inorganicFerrumIndustries > Pharmaceutical > Generi ...

sheet width: 2600 mm plate thickness: 5 mm rear stop: 1000 mm cutting angle: 1°06 ° no. of strokes: 45 Hub/min voltage: 380 V / 50 Hz total power requirement: 5,5 kW weight: 4500 kg dimensions of the machine ca.: 3600 x 2200 x 1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU250X199 MakeOuto Kumpu TypeHS10-64:50 No.07-312 Year of construction2007 Mounted on framecheck Main Features MaterialStainless steel Dia/Width600 mm Specified Features - Metal detector Metal detectorcheck Electric capacity2 kW, 220 volt Tunnel sizes600 Belt width600 mm Belt length300 mm With motor2 kW, 180 volt, 1750 rpm With variable speed drivecheck InletDN100 Outlet170x160 mm MaterialStainless steel General LocationBarneveld With switchcheck Floorspace1,20x1,30 m Total height1,00 m Extra Specificationsbelt is equipped with permanent magnetic rollers.Oils & fatPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchBiotechnologySpicesFeed additivesMetal detectorsOther pharmaceuticsCosmeticsFood additivesSugarDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesBiopharmaceuticalAPIOuto Kumpu Technology USAIndustries > Food & F ...

HSE 30-1100 ZE Cleaver Clamping force 26t Cylinder stroke 880 mm Gap length maximum 1100mm Split material diameter: 350mm Flow speed 3.7 - 12.5 cm/s Return speed 6.7 cm/s PTO and engine Drive power 400V 50Hz 5.5kW LxWxH 1050 x 1700 x 2500mm Weight 373kg G&STÜ-5981031

Inv. Num. : 8497 Type: HSLX 3008 Producer: HACO Created: 2016 Parameters: Maximum cutting length: 3000 mm Maximum cutting thickness: 8 mm Back gauge: 1000 mm Equipment: Set of knives Truck with rear handling

For sale is a powerful HST homogenizer, which has so far been used reliably in a cheese dairy. The device was built in 2016 and is in very good, well-maintained condition. It has been regularly serviced and is ready for immediate use. Line data: - Conveying capacity: 1,700 - 3,500 l/h - Maximum permissible operating pressure: 480 bar - Power main motor: 55 kW - Weight: 3,000 kg

Offer 25500 Specifications: - Cutting length 3050 mm - Cutting thickness at 400 N/mm², strength 13 mm - Cutting thickness at 400 N/mm², strength up to 1000 mm, length 15 mm - Cutting angle 0.5 - 3 ° - Number of sheet hold-downs 18 pcs - Stroke rate 10 - 23 min -Mot. Back gauge up to 1000 mm - Rear area protection with light barrier - Front angle stop 1000 mm - HSLX version: - CNC control HACO SC 5 controller when entering the sheet thickness in mm -Auto. Cutting angle adjustment according to sheet thickness - Cutting length limitation -Auto. Positioning of the backgauge (8 programs – 80 sets) with - Digital display and autom. Backgauge retraction - Possibility of mot. Adjustment of the backgauge by 2 push buttons - Drive 400 V / 22 kW - E - Footswitch - Space requirement without support arms approx. W 4200 x H 2250 x D 2200 mm - Weight ...

Technical data Maximum pressure: 9 tons Year of Make: 2010 Channel cross-section: 500 x 500 mm Dimensions of the tailgate: 400 x 450 mm Power connection: 400 V/ 50 Hz Machine is fully functional after technical supervision. Feel free to contact us! Machine is fully functional after technical supervision.

Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts.

tool adaptor: HSK 63 weight: . kg material: . Approx. 78 pieces The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: HSK 63 weight: . kg material: . Approx. 42 pieces The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: HSK 63 weight: . kg material: . Approx. 60 pieces The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used vertical packaging machine made by Velteko model HSV 101S1. New 2002. The machine is equipped with auger dispenser and a date dispenser + receiving conveyor + PRISMA 08D3 checkweigher. TECHNICAL PARAMETERS: The HSV 101S machine is designed for packing loose and small goods into bags, which the machine forms from a roll of packing material. The machine is designed for normal working environment protected from the influence of atmospheric agents with temperature regulation (-5 to +40°C) -AB5, AC1, AD1, AE1, BA4, BOI, BE1, CA1, CD1 - according to HD CENELEC 384.3 S 1 The parts of the machine coming into contact with foodstuffs are made of stainless steel (17 240 Cr-Ni) suitable for contact with foodstuffs. The capacity of the machine depends on the grade of packaging material, the goods being packed, and the capacity of the dispenser. - Performance of the machine (layered  ...

A hydraulic 3-roll plate rolling machine Omcca is available. Working length: 2050mm, max. plate thickness rolling/pre-bending: 8mm/6mm, roll diameter: 200mm. Machine dimensions X/Y/Z: approx. 3200mm/900mm/1500mm, weight: approx. 3300kg. On-site inspection is possible.

A self-cleaning disc stack centrifuge (disc separator) GEA is available. Drum speed range: 4000-4800rpm, drum diameter: 682mm, max. feed density liquid/solids: 1.1kg/dm³/1.3kg/dm³, drum volume: 125l. An on-site inspection is possible.

Maximum Trimmed Size: 355 × 340 mm, Minimum Trimmed Size: 120 × 75 mm, Maximum Folded Size: 360 × 350 mm, Minimum Folded Size: 130 × 105 mm, Included: Integrated MBO Folding Unit with Control Console, Equipped with: Central Control Panel with Touchscreen and Function Keys, Hohner Stitching Heads, Gathering Station with Multiple Feeders, Folding and Stitching Section by MBO, Three-Knife Trimmer, Delivery Unit with Conveyor and Stacking Table

Demonstration machine:Technical data:Grinding width 450 mmmax. Workpiece thickness 125 mmmin. Workpiece thickness 8 mmFeed infinitely variable 2-6 m/minGrinding roller diameter 82 mmSanding belt dimensions 457 x 1003 mmMotor output power 3 kW S6 (2.2kW S1 100% ED)Suction nozzle 100 mmDimensions L x W x H 1030 x 1000 x 1740 mmWeight 215 kg

This LVD HST 25/6 hydraulic shearing machine was manufactured in 1993. It is a robust and reliable piece of equipment, ideal for shearing applications. Consider the opportunity to buy this LVD HST 25/6 hydraulic shearing machine. Contact us for more information.

This HSM ABW-ROTA-2200 was manufactured in 2012. A used foil cutter featuring a cutting width of 2200 mm, it includes an IR preheating zone and a cooling unit. The semi-automatic roll change at the front and automatic stacking of sheets on pallets at the rear enhance its functionality. Consider the opportunity to buy this HSM ABW-ROTA-2200. Contact us for more information.

General SKU293X402 MakeZirbus TypeHST 6X6X9 No.4000 Year of construction2016 LocationBarneveld Pressure Working pressure2.8 Bar Vacuum possiblecheck Working pressure jacket2.5 Bar Technical specs Temperature138 °C Main Features MaterialStainless steel Volume525 Ltr. Pressure2.8 Bar Specified Features - Autoclave Horizontal autoclavecheck Capacity525 l. Internal width650 mm Internal depth970 mm Internal height700 mm Max. temperature-10°C/140°C With jacketvolume 48 l. Max. temperature-10°C/138°C Electric capacity380 volt With pumpcheck Motor1,5 kW, 230/400 volt, 2910 rpm MaterialStainless steel With jacketcheck General With switchgearcheck Floorspace0,98x1,10 m Total height1,95 m Weight505 kg CEcheck Extra Specificationswith Festo stainless steel air pressure vessel, volume 20 l., 16 bar, test pressure 24 bar, allowable temperature -10°C/+100°CG ...

Manufacturer: Sturtz Model: HSM - 30 / 40 Compact + Year of Manufacture: 2011 Electrical Specifications: - Input Power / Tension: 400 V 50Hz - Connection / Raccord: 25A - Phase: 3~ / N / Pe - Air Pressure / Service Pressure: 7 bar Find more here - .ucymachines/ Contact us at - sales@ucymachines

Offer 25032 Technical data: - Drilling capacity in steel ST 60 50 mm - Drilling capacity in steel ST 60 65 mm - Tapping device up to M 60 - Drilling spindle holder MK 5 - Drilling spindle stroke 240 mm - Projection 400 mm - Table with 2 T-slots 720 x 560 mm - max distance table – drilling spindle approx. 850 mm - 4 feeds 0.1 - 0.2 - 0.3 - 0.4 mm/rev - AZ continuously variable transmission with manual transmission - Drilling spindle speeds infinitely adjustable 40 - 1600 rpm - Drive 400 V / 5.5 kW - Space requirement approx. W 850 x H 2480 x D 1350 mm - Weight approx. 1450 kg

Offered is an ILLIG HSA 30 RD - high-performance continuous sealing machine for blister packaging: blister films: PVC, PET APET/PETG, PS, film thickness: 150µm-600µm, lid materials: heat-sealable cardboard, aluminum composite films, Tyvek, sealing area X/Y max. approx. 500mm/300mm, forming depth max. approx. 100mm, 8-18 cycles/minute. Inspection possible by arrangement. Available starting June 2026.

Max. X-axis stroke 200 mm Max. Y-axis stroke 220 mm Max. Z-axis stroke 280 mm Max. workpiece diameter 200 mm Max. workpiece height 200 mm Max. workpiece weight 100 kg

This 5s FEHLMANN PICOMAX 90-HSC + Erowa automation was manufactured in 2005. It features a table size of 1260x490 mm, with an impressive spindle speed of up to 36,000 rpm and a control system by Heidenhain TNC 530. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 90-HSC + Erowa automation we have for sale. Contact us for further details.

This 5-axis KERN HSPC EVO was manufactured in 2005. It features a spindle speed of 50,000 RPM, a tool magazine with 95 pieces, and a workpiece magazine with 24 pieces. The machine includes a Heidenhain iTNC530 control system and HSK 25 special holder. Note: the changer arm requires repair. If you are looking to get high-quality milling capabilities, consider the KERN HSPC EVO machine we have for sale. Contact us for more information.

6 feeders, Hand feeder, Cover feeder, Stitching unit, 2x 52/8 stitching heads, Trimmer, Spare knifes, books tools and standard parts Machine nr: 08.004

EXERON DIGMA HSC 600 milling center was built in 2010 in Germany by Exeron GmbH. It is an extremely versatile yet compact machine designed for the production of precision tools and moulds. A number of state-of-the-art technical solutions, combined with extensive equipment, guarantee excellent repeatability of the manufactured parts over many years of intensive operation. The EXERON DIGMA HSC 600 is distinguished by its extremely rigid gantry structure, made of polymer concrete. The entire workspace has been fully maximised to ensure maximum freedom of operation. It features all the necessary equipment, i.e. a reliable electro-spindle, a 30-position tool magazine and a large work table with a length of 900 mm and a width of 550 mm. The machining process is performed fully automatically in HSM (High Speed Cutting) technology. This technology allows a significant reduction in cycle ti ...

Max. Drilling diameter: 40mm, grinding wheel diameter: 200mm, grinding wheel width: 40mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 1200mm/850mm/1400mm, weight: approx. 350kg. Including cooling lubricant device and 10x spare grinding wheels. Documentation available. On-site inspection is possible.

amount: 1 STK Dimensions (HxWxD): 300 x 190 x 190 mm diameter: 60 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 x 6 x HSN skid, 1 oil cooler, 1 condenser, 2 x 50kw evaporators, 2 x 90kw evaporators, 1 electrical cabinet, 2 x Munters dehumidifiers.

1 x 4 x HSK 342KW skid at 7/-3°C, 1 x condenser, 1 x oil cooler

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minSpindle taperHSK-A 63 Rapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...

Used machine HSC70 linear Machine Type: CNC 5-Axis Milling Center Model: HSC70 linear Manufacturer: DECKEL MAHO Control:3D control Heidenhain TNC 640 Year of Make: 2016 #001347 Equipment: - Spindle speed up to 28,000 rpm - Production package 980I with ICZ and temperature control 01 - Rinsing gun for swarf rinsing - Electronic handwheel - Tropical Pack This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Used machine Universal Machining Center Machine type: DMG HSC 75 linear Control: Heidenhain i-TNC530 Year of Make: 2008 TECHNICAL DATA: Travels: X-axis: [mm] 750 Y-axis: [mm] 600 Z-axis: [mm] 560 Feed: (X/Y/Z) [m/min.] 90 Rapid Traverse: (X/Y/Z) [m/min.] 90 / 90 / 90 A-axis -10 B-axis +110 C-axis 360° Speed range: [1/min.] 28,000 Tool Changer Tool holder: HSK-A63 Tool positions: 60 Tool diameter: [mm] 80 / 140 Tool length: [mm] 300 NC rotary table Ø 750 Max. table load: [kg] 800 Table size: [mm] fixed tabe: 950 x 650 Max. table load: [kg] 1,000 Features: Chip conveyor This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Color: Yellow Single length 1.80 m Original packaging Price per single length (1.80 m) = 4.00 € + VAT Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Yellow Single length 2 m Original packaging Price per m = 5.00 € Minimum purchase quantity = 8 m Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Yellow Single length 2 m Minimum purchase quantity = 8 m Used Price per m = 3.00 € + VAT Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Drill bit, twist drill bit, drill bit, for drilling rig, drilling center -Quantity: 53x NC twist drills with tightening thread -Diameter: 8x Ø32mm 9x Ø34mm 8x Ø36mm 6x Ø38mm 1x Ø39mm 8x Ø40mm 7x Ø41mm 6x Ø42mm -Intake: MK4 -Type: HSS -according to pictures - Sale: only complete -Weight: 84kg

Running gear, jockey wheel, tandem load wheel, load rollers, heavy-duty rollers, heavy-duty wheel, tires, forklift drive wheel -Manufacturer: Sichelschmidt, 2 heavy-duty wheels from electric stacker M 1510 V -Wheel: Ø 225 mm -Width: 105mm -Intake: Ø 35 mm -Delivery/price: complete -Weight: 20 kg/pc.

Motor grinding spindle, grinding spindle, high-performance grinding spindle -Manufacturer: FS / JE, motor grinding spindle from CNC machining center Santenberg GTC S 2 -FS Heinz Fiege: Type: HSP 190 182.532.01 -JE Jaeger- engineering: Type PS 200/6300min/1 GS-100-0009 -Spindle: JE type 9SH1020A042000 -Dimensions: see photos -Number: 2x spindle available (1x right, 1x left) -Price per piece -Dimensions: 820/610/H530mm / 820/500/H520mm -Weight: 185kg / 180kg

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, presetting device -Milling holders: Adapter for tool presetting device 7 pieces -Types: HSK 63 HSK 100 SK 40/50 ANSI/CAT see photos -Levy/Price: complete -Total dimensions: 500/300/H170 mm -Weight: 34.4 kg

Square broaching tool, multi-wedge broach, broaching tool, broaching needle, grooving tool, keyway broaching tool, keyway broaching needle -Manufacturer: HS Hasseay Savage, broach push broach -Type: 11620 J9 HSS M-2 -Keyway width: 20 mm -Quantity: 1 piece available -Dimensions box: 495/50/H50 mm -Weight: 2.8 kg

Square broaching tool, multi-wedge broach, broaching tool, broaching needle, grooving tool, keyway broaching tool, keyway broaching needle -Manufacturer: HS Hasseay Savage, broach push broach -Type: 11622 J9 HSS M-2 -Keyway width: 22 mm -Quantity: 1 piece available -Dimensions box: 495/50/H50 mm -Weight: 2.8 kg

Robopac HS30 wrapper, complete, with original documentation. Professionally dismantled

Height=1.36 m, Overall length= 1.71 m, Overall width= 1.02 m, Net weight= 175 kg,

max. format 34 x 35.50 cm Year of construction: 2011 Computer control with touch screen 6 Investors VF Sheet monitoring 1 CF 1 transfer feeder Stapling station with 2 stapling heads Clamp control Three-knife trimmer T3 Stacker Rima RS 1012-S

Channel baling press with manual and automatic operation Bale length adjustable 400,600,800,1000mm Year of manufacture 1987 Machine has been overhauled by us, Master cylinder resealed Bonding 3-fold horizontal Instruction manual with electrical and hydraulic plan available, Control Siemens S 5 Filling opening 580mm w x 900 mm l Bale format 500mm w x 600 mm h