136,829 used machines on RESALE, but how to find them? Machine Search
Technical data of Used Universal cylindrical grinding machines Cometa HSP 2000: Wheel diameter: 762 mm Max diameter working: 800 mm Center height: 410 mm Working lenght: 2000 mm Wheel power: 15 hP Weight: 11 ton
Cutting machine HSM type ABW-ROTA-2200 Specifications: • for foils, cork, veneer, etc. • Rotational cross-section • Cutting width max. (mm): 2100 • Heating: included • Cooling: included
Baler HSM, type HL 7009 ST/A, year of construction 2021 Technical data: Manufacturer: HSM Type: HL 7009 ST/A Year of Make: 2021 Hours: 1118 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Filling opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (WxHxL) Bale weight: up to 600 kg Binding: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (LxWxH) Weight: 7500 kg Materials: paper, cardboard, foil Note: The press is in good condition and has been inspected and tested by us. You can find a video on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance paymen ...
used cabinet press Manafacture: HSM Type: V-Press 840 plus Year of construction: 2011 Machine No.: 6147.244. Serial No.: 340001635 Z specifications: Pressing force: 36 t / 356 kN Transport length approx. 1,780 m Transport width approx. 1,247 m Transport altitude approx. 2,985 m Insertion opening width approx. 1,195 m Insertion opening height approx. 0.65 m Drive power 4 kW Weight approx. 1.8 t Bale weight up to approx. 360 kg Binding: 4-fold vertical (Subject to errors in the technical data)
Press force: 10t, loading aperture dimensions X/Y: 580mm/900mm, bale width/height: 500mm/600mm, bale weight depending on material: approx. 100kg, motor power: 6.8kW, Control system: Siemens SIMATIC S5-100U. Machine dimensions X/Y/Z: 4700mm/1000mm/1540mm, weight: approx. 1200kg. The machine has been overhauled and is in good condition. Documentation available. An on-site inspection is possible.
Shredder HSM FA 500.3 - the paint renovation Specifications Cutting width: 10.5x40-76mm Productivity: approx. 600-650 sheets (DIN A4, 70g/m²) Cutting speed: 210mm/s Power supply: 400 V / 7.5 kW Year of construction: 2014 Price: on request the security level: P-2, O-2, T-2, E-2
Siat HSD 312 - S Semi-Automatic Plate Winding Machine Version with horseshoe turntable for easy loading with a pallet truck Manufacturer: Siat Type: HSD 312-S Model A 400 Volt / 50 Hz Year of construction: 2000 Capacity: 1200 kg Turntable: with fork recess Turntable diameter:1500 mm Adjustable rotation speed of the turntable Motorized foil pre-stretch adjustable to 100% or 200% Turntable height: 75 mm Winding programs Program 1: Double wrapping with raising and lowering of the film trolley Program 2: Double wrapping with lifting – pause to attach the top cover of the pallet – and lowering the film trolley Program 3: Easy wrapping with just lifting the foil trolley Program 4: Easy wrapping with lifting of the foil trolley and pause to attach the top cover More items - new and used - can be found in our shop! International shipping costs on request!
Bitzer refrigerant compressors unit Type: HSK7461-80-40P (x3) Volume: 220 m3/h (x3) Cooling capacity for R404A: 560 kW at - 5°C/40°C, 477 kW at -10°C/40°C, 338 kW at -20°C/40°C Dimensions: 4500 x 1200 x 2300 mm Condenser Thermofin Type: X-TCH 100.1-25-B-N(D5/S5) Cooling capacity: 963/852 KW Air flow: 295 000 / 234 000 m3/h Number of fans: 10 x 1000 mm Dimensions: 9800 x 2300 x 1600 mm Volume: 229.3 L Weight: 1 929 kg Control panel Dimensions: 2400 x 600 x 2000 mm
MTP HSH-6x3200 hydraulic guillotine shears were built in 2016 in Poland by Metal Technics Polska s.c. The machine is designed for the precise cutting of sheet metal with a maximum length of 3200 mm and a thickness of 6 mm. The cutting process is performed by cutting knives with high wear resistance, which provide accurate, repeatable results even during intensive operation. The work table is fitted with built-in balls to facilitate the positioning of the material in the working area. The MTP HSH-6x3200 also features an ESTUN E21S CNC controller with an intuitive interface and many functions designed to facilitate machine operation. All this is complemented by a robust design which, combined with a 9 kW motor, ensures reliable operation of the machine in demanding industrial conditions. The HSH 6x3200 guillotine shears weigh 7200 kg. Technical specifications of the MTP HSH-6x3200 guill ...
Technical data press: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2010 Operating hours 3,817 hours, as of August 2026 Number of bales pressed 36,001 bales, as of August 2026 Press force main press 1000 kN Specific pressing force 120 N/cm² Press force cutting edges free kick 121 kN Dimensions of the insertion tray 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 to 2000 mm Drive power 2 x 45 kW, frequency-controlled Connected load 110 kW Current consumption, total 213 A Fuse 250 A slow blow Tying 5-fold horizontally, fully automatic throughput capacities with a Bulk density of 20 kg/cbm 12.86 t/hour Bulk density of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depending on t ...
Bitzer refrigerant compressors unit Type: HSK7471-90-40P (x3) Volume: 250 m3/h (x3) Cooling capacity for R404A: 531 kW at -5°C/40°C, 435 kW at -10°C/40°C, 280 kW at -20°C/40°C Dimensions: 4500 x 1200 x 2300 mm Condenser Thermofin Type: X-TCH 100.1-26-B-N(D5) Cooling capacity: 1103 / 997 KW Air flow: 354 000 / 281 000 m3/h Number of fans: 12 x 1000 mm Dimensions: 11 800 x 2300 x 1600 mm Volume: 276 L Weight: 2 400 kg Control panel Dimensions: 2400 x 600 x 2000 mm
HSK63 Mounting Device Condition: Good
This 4-axis HITACHI SEIKI HS630 was manufactured in 2001. It features a travel of 850 mm on the X-axis, 800 mm on the Y-axis, and 850 mm on the Z-axis. The machine has a table work area of 630 x 630 mm and a maximum pallet load capacity of 1200 kg. If you are looking to get high-quality machining capabilities, consider the HITACHI SEIKI HS630 horizontal machining centre we have for sale. Contact us for further details.
Specifications Maximum pressure: 54 tons Power supply: 400V / 7.5 kW Press force: 5.62 kg/cm² Year of construction: 2005 Bale size: 1200x800x1200 mm Productivity: approx. 2 bales/hr Bale weight: approx. 500 kg Price: on request Machine is fully functional, after technical supervision. Price also includes paint renovation.
Hobart HSM40 Planetary mixer Planetary mixer, variable speed, 2x 40l stainless bowls, three attachments beater, hook, whisk, mesh safety guard, 3Ph
Wilco WILCOMAT R HSA 02/R 20 VISION fully automatic system for test vials which combines two test methods in the following steps: 1. Headspace Analysis (HSA) to determine the oxygen content in the test specimen (1 test station), 2. VISION for the detection of manufacturing and cosmetic defects (3 cameras), main machine components: 1. Interface with the HMI control panel, 2. In-line feed conveyor, 3. Bypass system, 4. HSA test rotor with the HSA 1 single-head HSA test station, 5. ‘HSA Reject’ and ‘HSA Not Inspected’ trays, 6. Acceleration screw conveyor from HSA to VISION, 7. VISION test rotor with three VISION test stations: Cap 1, Flip-Off, Cap 2, 8. ‘VISION Grey/Uninspected’ tray with star wheels, 9. In-line outfeed conveyor followed by a tray loader, 10. Three (3) electrical control cabinets, 11. One (1) vacuum pump. The following trays are provided for: Tray-HAS Defective ...
Specifications Maximum pressure: 12 tons Power supply: 380V/ 5.5 kW Press force: 2.5 kg/cm² Year of construction: 1985-1993 Bale size: 800x600x(600-1000)mm Productivity: approx. 3 bales/hr Bale weight: approx. 100 - 200 kg Price: on request Machine is fully functional, after technical supervision.
Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa
Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, C-axis rotation range: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, power-on hours: 56612h, spindle operating hours: 21206h. The machine is located in the United Kingdom. Inspection possible by appointment.
Refrigerant compressors system Bitzer Type: HSK 6461-60 (x3) Volume: 165 m3/h (x3) Cooling capacity for R404A: 351 kW at -5°C/40°C, 287 kW at -10°C/40°C, 185 kW at -20°C/40°C Dimensions: 3500x1000x2150 mm Items in magazine: 2 Reference number: Z64 Condition: Used in good condition
Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa
Baler HSM 8 TE; good condition; cleaned and tested; Pressing force 80 KN; Bale size 650x505x500mm; with strapping. Baling press HSM 8 TE; good condition; cleaned and checked; pressing power 80 KN; bale size 650x505x500mm; with strapping tape.
Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 60 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for par
Cabinet press incl. tilting device Manufacturer: HSM Type: V-Press 860 TimeSave Year of construction: 2021 Specifications Press force: 594 kN Specific pressing force: 63.46 kN/cm² Drive power: 7.0 kW (4.0 + 3.0 kW) Voltage/Frequency: 400 V / 50 Hz Press capacity idle (theoret.): 26.25 m³/h Bale dimensions: 1,200 x 780 x 1,200 mm Bale weight: up to approx. 430 kg Type of feeding: autom. Lift-tilt device with lattice trolley Machine dimensions: 2,202 x 3,584 x 3,004 mm (W x D x H) Binding: manual with quick-link wire Suitable for: cardboard + mixed paper
pressure: 40 t distance between columns: 695 bzw. 215 mm stroke: 100 mm table surface area: 650 x 440 mm ram surface: 580 x 285 mm dayligth: 400 mm total power requirement: 15 kW weight of the machine ca.: t dimensions of machine L x W x H: 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Control: iTNC 530 Max.travel range: X 450 mm Y 650 mm Z 460 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon machine has spindle cooling, Erowa clamping system is available, measuring probe for pa
with pallet changer for 20 pallets. Control: iTNC 530 Max.travel range: X 885 mm Y 600 mm Z 600 mm A -10 / + 110? C nx 360? Spindle speed ? 28000 rpm Taper ? HSK 63 Tool changer ? 120 positon Exchange of pallets: 20 pallets Coolant tank: 1000l machine ha
Control: iTNC 530 Max.travel range: X 850 mm Y 700 mm Z 500 mm A +/- 115? C nx 360? Spindle speed ? 18000 rpm Taper ? HSK 63 Tool changer ? 38+44 positon Coolant tank: 900l machine has spindle cooling, Erowa clamping system is available, measu
coil weight: 30.000 kg band width: 300-1300 mm coil outside dia.: 900-2.000 mm diameter of the mandrel: 570-630 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...
This 3-axis Exeron HSC 300/3 was manufactured in 2017. It features impressive travels of 550 x 340 x 355 mm and a clamping table size of 470 x 400 mm with a maximum load of 500 kg. The machine is equipped with a high-frequency spindle capable of speeds up to 42,000 rpm and a tool magazine with 40 positions. If you are looking to get high-quality machining capabilities, consider the Exeron HSC 300/3 vertical machining centre we have for sale. Contact us for further details.
High Speed Cutting - Special machining center with FANUC® nano-contour technology for the fashion accessories and jewelry industry and similar industrial processes where the greatest possible precision is required, such as dental technology – medical technology – mold making. For the processing of precious metal alloys, as well as aluminium – copper – brass – bronze and similar non-ferrous metals. The raw material to be processed is forged – cast or rolled flat bars up to 150 mm wide and maximum 500 mm long, which are stored in a blank magazine. Automatic loading of flat bars (raw or raw material), material thickness from 1 mm to 15 mm – automatic unloading of finished flat bars. Milling spindle drive power 8 kW Milling spindle speeds up to 36,000 rpm Tool holder HSK40 Tool magazine for 24 pieces of tools - Automatic pneumatic flat bar clamping - Automatic ...
Perkin Elmer HS 40, Headspace sampler for 40 vials, max. temperature + 210 Celsius, min. +35 Celsius, fits all gas chromator graphs,
Type: Milling Machine/Machining Center Ident Number: 22592 Category: Milling Machines Manufacturer: Exeron Model: HSC 500 Year of construction: 2016 Travel: 620 x 570 x 350 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Spindle mount: HKS 40-E Spindle speed: 42000 rpm max. workpiece weight: 350 kg ITNC 530 Software 30-speed WZ changer Spindle HSK40 Blumlaser Tool Measurement Renishaw Probes Aspirator Oil mist extraction Minimum quantity lubrication
Type: Milling Machine/Machining Center Ident Number: 22367 Category: Milling Machines Manufacturer: Mikron Model: HSM 500 Year of construction: 2006 Travel: 500 x 450 x 360 mm [ X x Y x Z ] HSC Machine Number of axles: 3 Control: Heidenhain iTNC 530 Spindle mount: HSK 32 E Spindle speed: 54000 rpm Table size X: 550 mm Table size Y: 450 mm max. workpiece weight: 200 kg Tool changer: 40 speed Conveyor Laser probes for tools Probe PS 32 Infrared / HSK 32 E Minimal lubrication Oil Mist Extraction Device APS Advanced Process System ITC Intelligent Heat Control Mobile handwheel
SECOND-HAND PROFILE SHAPER AND SANDER BALESTRINI CP8/HSC - CE RULES - positions 1-2 milling units - positions 3-4 milling units - positions 5-6 sanding units - positions 7-8 sanding units - positions 9-10 trasversal sanding units - working length mm. 2500 - working height mm. 180 - n. 10 pneumatic locking cylinders - SN 0 133 H2 - CE rules (year 2001)
Sturtz welding and cleaning line Left-to-right direction SE-HSM-30/26 Compact 0.2mm 3000x2600mm P-260-WST 4AS-JC WST 25
Key data: 4050 mm, 10 mm, 1000 mm
brand new, with control SC100T Specifications: max. cutting length 4050 mm max. sheet thickness for ST 45 10 mm Cutting angle 0.5 - 3° degrees Cutting gap adjustment 0.05 - 1 mm Hold-down 23 Back gauge area 1000 mm Stroke rate 7 - 11 strokes Length of the angle stop 1000 mm Weight approx. 13,000 kg Standard equipment: - SC 100T control - Cutting length limitation - Motorized back gauge 1,000 mm - Electronic cutting gap adjustment - Cutting line lighting with wire - Electro-hydraulic cutting angle adjustment via 2 push buttons or CNC - Angle stop 1,000 mm with scale, T-slot and fold-down cam - Scissor table with square supports and roller support - Mobile foot pedal for easy and safe handling - Hydraulic and mechanical overload protection - Finger guard made of round steels with recessed grip - Light barriers and protective fences - Machine according to CE ...
Specifications Maximum pressure: 6 tons Press force: 2.5 kg/cm² Bale size: 600x400x500 mm Bale weight: approx. 50 kg Power connection: 400V / 2.2 kW Year of Make: 1995 Productivity: approx. 3 bales/hour Shredder Cutting width: 5.8 mm Power connection: 380 V/ 4 kW Year of Make: 1994 Safety level: DIN 66399-1, 5.2 P-3 /O-2/T-2/E-2/
power capacity: - kW volt: - V ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Inv. Num. : 7796 Type: HSA 200 T Producer: Hidroliksan Created: 2022 Parameters: Operating hours: 1600 h Compressive force: 200 t Maximum stroke: 450 mm Top table length: 1600 mm Top table width: 1400 mm Speed (high): 250 mm/s Speed (down): 160 mm/s Working speed: 5-18 mm/s Machine height: 5000 mm Machine length: 3650 mm Machine width: 3400 mm Machine weight: 18,000 kg
Carpentier HSA/60-2/V4 and GV-HM + 2 head folding carton erector HSA/60-2/V4 hot melt and straight seamer GV-HM hot melt + 2 stamp sets for 2 formats available: 188 x 150 mm and 195x 145 mm + meler micron 4/4-120P hot glue machines, incl. manual glue gun + Operating instructions and circuit diagrams available + Siemens S7-300 + Simatic Panel HMI + Videojet coding + Built in 2009 + Like-new condition sartorius EWK 3010 Checkweigher + Built in 2009 + Mint condition Conveyor belts, curved belts + Stainless steel link chains + Drive + Mint condition At call
Foldable mechanical heating press with pressing surface approx. 150250mm. Stable press frame made of generously dimensioned aluminium plates and steel joints. Closure of the press plate and heating plate with ratchet. 2 pre-tensioning beams for locking hinges by means of eccentric clamps. With electric aluminum heating plate 400 watts, 1.74 A, heating area approx. 150 250 mm to 250°C, connection 230 V. With sensor and temperature control. Pressure-resistant insulating plate for use in presses. Suitable for pressing, welding transport belts and plastic straps.
maximum number of results exceeded
please refine your search
