hs used for sale

x-travel: 600 mm y-travel: 450 mm z-travel: 300 mm CNC-control: Roeders RMS6 table-size: 700 x 550 mm max. table load: 800 kg spindle taper ISO: spindle turning speed range: 42.000 U/min feed stepless: 0 - 30.000 mm/min rapid traverse: 30 m/min drive capacity - spindle motor: 14 kW tool change unit: Pick-up 18 Pos. voltage: 400 V total power requirement: 20 kVA weight of the machine ca.: 5,2 t dimensions of the machine ca.: 3,00 x 2,30 x 2,70 m - Serial No.: 88231-83 - HSC spindle Fischer MFW1230/42 - Dust extraction system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ė engine capacity exceeding 1.1 kW (900 RPM). 310 x 250 mm grinding shaft. 2 clamping ė velen styles (the rubber surface), diameter 30 mm. the preparation of Į (i) the measurements x 350 x 655 mm, 505. the preparation of Į weight 20 kg.

Specifications Cutting width: 7.5x40-80 mm mm Year of construction: 1999 Productivity: approx. 300 sheets (A4, 70g/m²) Price: on request Cutting speed: 250 mm/s Safety level: 2+1 wg DIN 32757 P-2,O-2,T-2 due to DIN66399 Power supply: 400 V / 6 kW Maximum pressure: 9 tons Power supply: 400V/4kW Press force: 3.64 kg/cm² Year of construction: 1999 Bale size: 550x450x350 mm Productivity:- Bale weight: - Price: on request

Specifications Maximum pressure: 6 tons Press force: 2.5 kg/cm² Bale size: 600x400x500 mm Bale weight: approx. 50 kg Power connection: 400V / 2.2 kW Year of Make: 1995 Productivity: approx. 3 bales/hour Shredder Cutting width: 5.8 mm Power connection: 380 V/ 4 kW Year of Make: 1994 Safety level: DIN 66399-1, 5.2 P-3 /O-2/T-2/E-2/

Cutting range round: 12-273mm, square: 12-200x12-200mm, rectangular diagonal: less than or equal to 273mm, profile cutting: U-, L- and H-profiles with flange lengths less than or equal to 180mm, maximum weight of a single tube: 200kg, remnant length (tailing): greater than or equal to 150mm, maximum manual loading length: 7100mm, maximum acceleration: 1.2G, maximum travel speed: 120m/min, positioning accuracy: +/-0.03mm/m, machine dimensions (with loader): 12,500x4,700x2,600mm. Equipment: Raycus 3 kW laser source, HSG Blade laser cutting head, Rexroth/SANYO DENKI/Inovance servo motor, Shimpo rack-and-pinion drive, linear guide, HSG machine platform, HSG automatic self-centering chuck, HSG X9000 control system, TTN nesting software, MOOXEE/Lanny proportional cutting gas valve (6kW), water chiller and installation kit, with documentation. The machine has not been used and an on-site inspec ...

Machine configuration 1. 6kw Raycus Fiber Laser Source 2. HSG Laser Cutting Head P10 3. HSG Alpha T-Bus Control 4. HSG-NEST nesting software 5. Monitor with touch function 6. Aluminum crossbeam 7. Hiwin Linear Guide 8. Inovance servo motor and driver 9. SMC Oxygen Control Valve 10. Collision protection 11. Automatic lubrication 12. Ergonomic remote control 13. WLAN / LAN connection 14. Electronic components from Schneider, Eaton and Noark 15. Pneumatic components from Aventics 16. Fault monitoring of the main machine, laser source as well as chiller 17. Cutting gas low pressure alarm function 18. Water Chiller 19. Extraction system Interchangeable table system: 1500mm x 3000mm Further configurations are available with regard to the fiber laser power output and the processing area

Vertical baler HSM V-Press 860 plus, built in 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of Make: 2021 Hours: 450 Pressing force: 60 t Drive power: 4 kW Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (WxDxH) Weight: 2213 kg Materials: foil, paper, cardboard boxes Note: The press is in good condition. It has been checked and tested by us. You can find a video on our website or Youtube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. Th ...

Vertical baler HSM V-Press 860 plus, built in 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of Make: 2021 Hours: 423 Pressing force: 60 t Drive power: 4 kW Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (WxDxH) Weight: 2213 kg Materials: foil, paper, cardboard boxes Note: The press is in good condition. It has been checked and tested by us. You can find a video on our website or Youtube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. Th ...

Manufacturer: HSM Model: HSM V-Press 1160 eco Type of machine: Cabinet Press Year of manufacture: 2011 Pressing force: 532 kN Voltage: 3 phase, 400 V, 50 Hz Motor: 7.5 kW Rated current: 15.5 amps Find more here - .ucymachines/ Contact us at - sales@ucymachines

In the pipeline HSM baler, type HL 7009 ST Re, year of manufacture 2017 Technical data: Manufacturer: HSM Type: HL 7009 ST Re Year of Make: 2017 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Filling opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (WxHxL) Bale weight: up to 600 kg Binding: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (LxWxH) Weight: 7500 kg Materials: paper, cardboard, foil Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, without warranty or guarantee.

Baler HSM 8 TE; good condition; cleaned and tested; Pressing force 80 KN; Bale size 650x505x500mm; with strapping. Baling press HSM 8 TE; good condition; cleaned and checked; pressing power 80 KN; bale size 650x505x500mm; with strapping tape.

Baler HSM, type HL 7009 ST/A, year of construction 2021 Technical data: Manufacturer: HSM Type: HL 7009 ST/A Year of Make: 2021 Hours: 1118 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Filling opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (WxHxL) Bale weight: up to 600 kg Binding: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (LxWxH) Weight: 7500 kg Materials: paper, cardboard, foil Note: The press is in good condition and has been inspected and tested by us. You can find a video on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance paymen ...

Good day We hereby offer you a used baler from the manufacturer HSM, type VK 4812. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: HSM Type VK 4812 Year of construction: 2011 Operating hours 20,580 hours Pressing force main press 48 t Drive power 30 kW Machine weight press 12 t The machine documentation is available in German. A viewing is possible by appointment in our workshop. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH

HSG Store Pro Smart automation for modern production Fits 3015 and 4020 available. The HSG STORE Pro is an intelligent and flexible automatic loading and unloading system designed to effectively address common production challenges such as staff shortages, limited space and low machine utilization. With a tower height of only 4.4 meters and up to 10 storage positions, you can use your space up to 70% more efficiently. Synchronized processes minimize waiting time and maximize machine capacity – ideal for higher outputs even in the second or third shift. The STORE Pro supports a variety of sorting strategies and grows modularly with your production needs. Affordable, secure and easy to use – the perfect automation solution for every step of your process. Automation reduces waiting times because logistics employees have less manual material. At the same time, our system ensu ...

This HSM ABW-ROTA-2200 was manufactured in 2012. A used foil cutter featuring a cutting width of 2200 mm, it includes an IR preheating zone and a cooling unit. The semi-automatic roll change at the front and automatic stacking of sheets on pallets at the rear enhance its functionality. Consider the opportunity to buy this HSM ABW-ROTA-2200. Contact us for more information.

Balers, HSM, 30 tons Pressing force – used - : Price from location: only 2.950.-€ (net) Manufacturer: HSM Type: 225.1 VL Year of Make: 1999 Machine number: 6124.834. N Serial Number: 200014505 Press pressure: 30 tons 400V, 5.5kW, Condition: good Available: from Q4/2026 Location: Hamburg

Tube cutting machine manufactured in 2021. This HSG HS-TL220 features a powerful 3000 W fiber laser and a maximum no-load speed of 110 m/min. It is capable of processing round tubes with diameters ranging from Ø20 to 210 mm and square tubes from 20 × 20 mm to 150 × 150 mm. If you are looking to get high-quality tube cutting capabilities, consider the HSG HS-TL220 machine we have for sale. Contact us for further details.

Available from the end of August 2026 Baler HSM VK 4812P, year of manufacture 2018, without hopper Manufacturer: HSM Type: VK 4812P Year of manufacture: 2018 Press force: 48 t Drive power: 22 kW Total power: 27 kW Filling opening: 1020 x 1250 mm (WxL) Capacity: 50 kg/m³: 7.5 t/h Bale size: 1,100 x 750 x 600-1200 mm Bale weight: 300-550 kg Binding: 4-fold, automatic Transport dimensions: approx. 7,530 x 2,400 x 2,400 mm (LxWxH) Weight: approx. 10,000 kg Materials: PET bottles, cardboard, paper, foil An operating manual and EC declaration of conformity are available in German. Note: The machine is currently still in use and can be viewed by appointment. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and ca ...

VERTICAL BALLER FOR SALE OR RENT! (Rental available in Lithuania, Latvia, Estonia, and Poland)! Technical Information: Manufacturer: HSM Model: HSM 500 VL Pressing Force: 54–540 kN Roll Size: 1200 x 800 x 1200 mm Roll Weight: approx. 500 kg Max. Roll Size: approx. 1200 x 800 x 1200 mm (W x D x H) Pressing Chamber Dimensions: 1200 x 800 x 1520 mm (W x D x H) Motor: 7.5 kW Year of Manufacture: 2005 PRICE AVAILABLE UPON REQUEST!

Vertical Baller HSM 45 VL for SALE/RENT! Producer: HSM Type: 45 VL Year of production: 1995 In total we have 6 pcs.

Channel baler HSM VK 4812P, year of construction 2018 Manufacturer: HSM Type: VK 4812P Year of manufacture: 2018 Hours: 6765 Press force: 48 t Drive power: 15 kW Total power: 18 kW Filling opening: 1020 x 1250 mm (WxL) Capacity: 50 kg/m³: 7.5 t/h Bale size: 1,100 x 750 x 600-1200 mm Bale weight: 300-550 kg Binding: 4-fold, automatic Transport dimensions: approx. 7,530 x 2,400 x 2,400 mm (LxWxH) Weight: approx. 10,000 kg Materials: PET bottles, cardboard, paper, foil Note: The press has been checked and tested by us. You can find a video on our website or YouTube channel. An operating manual and EC declaration of conformity are available in German. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revo ...

Fraesspindel HSD ES805 8.5 kW with admission HSK63

Automatic baler Manufacturer: HSM Type: VK 4012 Year of construction: 2005 specifications: pressing force: 45 t Channel format: 720 x 900 mm (W x H) Setting: 4 x horizontal Filler: 1.000 x 650 mm Power: 22 kW with Superchargers Throughput capacity at 40 kg/m³ bulk density: maximum approx. 12.8 t/h Bale dimensions: approx. 720 x 900 x length (600-1.200) mm including funnel in special execution for the purpose of manual loading

automatic baler Manufacturer: HSM Type: VK 8818 R-FU, 100 t Year of manufacture / delivery date: 12/2012 Operating hours: approx. 13,500 specifications: Press force: 1000 kN Specific pressing pressure: approx. 120 N/cm² Channel format: 1,100 x 750 mm (W x H) Binding: 5-fold horizontal Wire push-through: seen in the direction of pressing on the left side Filling opening: 1,800 x 990 mm Drive power: 2 x 45 kW Control: S7-300 Theoretical throughput: - At 20 kg/m³ bulk density: approx. 12.86 t/h - At 50 kg/m³ bulk density: approx. 32.15 t/h Cycle time: approx. 8.3 sec. Bale dimensions: approx. 750 x 1,100 x length (600-1,200) mm Bale weights: approx. 500 - 750 kg Machine weight: up to approx. 30,000 kg including: - Remote maintenance system - Wire Slot Maze - Press box double-walled with replaceable HARDOX 500 sh ...

Cardboard press, paper press Horizontal version bale size 60x70x70 cm with cutting device Make HSM 14 to Presskraft older model year unknown. Very comfortable due to Insertion shaft and cutting device. The finished bale can be placed directly on a Pallet can be pushed out. Has a large hydraulic agregat runs very fast and quiet. Sale without guarantee/liability or warranty for VB 3.600,--€ plus VAT VAT. Peter Knam Sweden 7 D-88085 Langenargen peterknam.de 07543/4242

used cabinet press Manufacturer: HSM Type: V-Press 825 plus pro Year of construction: 2018 Machine no.: 6152.324. Series No.: 570001118 specifications: Pressing force: 25 t Filling opening: 1,195 - 540 mm (W x H) Press box dimensions - 1,200 x 780 x 1,300 mm (L x W x H) Bale size: 1,200 x 780 x max. 700 mm Bale weight: up to 280 kg Drive power: 4 kW Cycle time at idle (theoretical): 39 sec. Binding: 4-fold - vertical with polyband Machine dimensions: 1,700 x 1,248 x 2,370 mm (W x D x H) Machine weight: 1,210 kg (Subject to errors in the technical data)

used cabinet press Manufacturer: HSM Type: VL 155.2 Year of construction: 2006 Machine No.: 6114.144. Series No.: 270174730 U specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling chamber - 1100 - 700 x 1130 mm Bale size: 1.100x700x950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Capacity: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

automatic baler Manufacturer: HSM Type: VK 42/800 Year of construction: 2002 specifications: Pressing force: 42 t Channel format: 700 x 800 mm (W x H) Binding: 4-fold horizontal Filling opening: 800 x 650 mm Drive power: 30 kW Optionally with conveyor belts

used cabinet press Manafacture: HSM Type: 155.1 VL Year of construction: 1998 Machine no.: 6118.114. 01217M Serial no.: 6118.01217 specifications: Pressing force: 18 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

used cabinet press Manafacture: HSM Type: VL 155.2 Year of construction: 08 / 2003 Machine No.: 6114.734. R Serial No.: 240141893 specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1,100 x 700 x 950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Output: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

used cabinet press Manafacture: HSM Type: V-Press 840 plus Year of construction: 2011 Machine No.: 6147.244. Serial No.: 340001635 Z specifications: Pressing force: 36 t / 356 kN Transport length approx. 1,780 m Transport width approx. 1,247 m Transport altitude approx. 2,985 m Insertion opening width approx. 1,195 m Insertion opening height approx. 0.65 m Drive power 4 kW Weight approx. 1.8 t Bale weight up to approx. 360 kg Binding: 4-fold vertical (Subject to errors in the technical data)

Shredder HSM FA 500.3 - the paint renovation Specifications Cutting width: 10.5x40-76mm Productivity: approx. 600-650 sheets (DIN A4, 70g/m²) Cutting speed: 210mm/s Power supply: 400 V / 7.5 kW Year of construction: 2014 Price: on request the security level: P-2, O-2, T-2, E-2

Cutting machine HSM type ABW-ROTA-2200 Specifications: • for foils, cork, veneer, etc. • Rotational cross-section • Cutting width max. (mm): 2100 • Heating: included • Cooling: included

automatic baler Manufacturer: HSM Type: VK 8818 R-FU Year of construction 2021 Operating hours: approx. 81 Technical data: Press force: 1000 kN Specific pressing pressure: approx. 120 N/cm² Channel format: 1,100 x 750 mm (W x H) Binding: 5-fold horizontal Wire push-through: seen in the direction of pressing on the left side Filling opening: 1,800 x 990 mm Drive power: 2 x 45 kW Control: S7-300 Theoretical throughput: - At 20 kg/m³ bulk density: approx. 12.86 t/h - At 50 kg/m³ bulk density: approx. 32.15 t/h Practical throughput: approx. 50 % of the previously mentioned theoretical performance Cycle time: approx. 8.3 sec. Bale dimensions: approx. 750 x 1,100 x length (600-1,200) mm Bale weights: approx. 500 - 750 kg Machine weight: up to approx. 30,000 kg Optionally with: Press feed belt Manufacturer: ? from ...

Cabinet press incl. tilting device Manufacturer: HSM Type: V-Press 860 TimeSave Year of construction: 2021 Specifications Press force: 594 kN Specific pressing force: 63.46 kN/cm² Drive power: 7.0 kW (4.0 + 3.0 kW) Voltage/Frequency: 400 V / 50 Hz Press capacity idle (theoret.): 26.25 m³/h Bale dimensions: 1,200 x 780 x 1,200 mm Bale weight: up to approx. 430 kg Type of feeding: autom. Lift-tilt device with lattice trolley Machine dimensions: 2,202 x 3,584 x 3,004 mm (W x D x H) Binding: manual with quick-link wire Suitable for: cardboard + mixed paper

Mechanical Sheet Metal Shears HSK/W Small mechanical slag shears Capacity 1030×2.5mm With electric rear and forward stop With extra knife Can be viewed under power

HSG Fiberlaser Model Laser Power G12025FA 12-60kW Working range : 12100×2500mm or G12035FA 12-60kW Working range : 12100×3500mm o Up to 45 degrees 3D machining optional. Perfect to replace your old plasma cutting machine. 12-60kW Cutting Head 3D(Optional) Max. Linkage Acceleration 0.5G Max. Linkage Speed 80m/min more information on request

For sale is a powerful HST homogenizer, which has so far been used reliably in a cheese dairy. The device was built in 2016 and is in very good, well-maintained condition. It has been regularly serviced and is ready for immediate use. Line data: - Conveying capacity: 1,700 - 3,500 l/h - Maximum permissible operating pressure: 480 bar - Power main motor: 55 kW - Weight: 3,000 kg

Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: HSAJET, Power Supply for Inkjet Printers -Type: Minitouch MTHP4 MTHP4PSU V2.0 402C0B -Input: 100-240 V -Dimensions: 200/120/H95 mm -Weight: 1.5 kg

LVD HST-C 3100 x 6 mm Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Strokes/min: 12 > 50 str/min Adjustable cutting device: 0,05 > 0,8 Backgauge: electric - 1000 mm Adjustable cuttingedge: 0,5 > 2,0° Electric motor (power): 9,5 kW Length: 4110 mm Depth: 1820 mm Height: 1850 mm Weight: 5,5 ton Number of sheet holders: 21x

Baler V8 | 8t pressing force. Press for cardboard, foil, paper. V8 MEDIUM-SIZED BALER Our V8 baler is versatile and offers medium-sized companies that need to process a range of materials, including bulky objects and packages of different sizes, with excellent value for money. The V8 produces bales that fit perfectly on a Euro pallet and is suitable for pressing cardboard, plastic, textiles, paper, polystyrene and food waste Recommended for supermarkets, gas stations, department stores, hotels, factories and logistics centers. Bale size: 800 mm H × 950 mm W × 600 mm D Bale weight: 100–180 kg Pressing time: 33 seconds Pressing force: up to 8 tons Dimensions: 2270 mm H × 1100 mm W × 745 mm D Filling opening: 950 mm W × 485 Integrated bale ejection mechanism Weight: 425 kg Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Noise: 70 decibels E-Power DIN EN  ...

Baler V20X | 20t press for cardboard, foil, paper, waste Baler, packaging press V20X | 006 With a pressing force of up to 25 tons, the V20X can efficiently compact cardboard, plastic, paper, textiles and food waste. Recommended for markets, department stores, hotels and all other users who have to deal with average amounts of waste and have to work at low ceiling heights. Bale size: 800 mm H (variable) × 1100 mm W × 750 mm D Bale weight: 200–300 kg Pressing time: 35 seconds Pressing force: up to 25 tons Dimensions: 1970 mm H × 1695 mm W × 865 mm D Filling opening: 1100 mm W × 625 mm H Integrated bale ejection mechanism Weight: 980 kg Power supply: Three-phase, 380/400 volt 3 kW motor Noise: 74 decibels DIN EN 16500 IP54 protection class E-Power Standards PLC light indicator "Bale full" and "Automatic pressing process"

Maximum pressure: 14 tons Pressing force: 2.92 kg/cm² Bale size: 800x600(600-1000) mm Bale weight: approx. 100 - 200 kg Power supply: 380V/7.5kW Year of construction: 1993 Productivity: approx. 3 bales/hour Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Maximum pressure: 54 tons Pressing force: 5.62 kg/cm² Bale size: 1200x800x1200 mm Bale weight: approx. 500 kg Power supply: 400V / 4 kW Year of construction: 1999, 2000 Productivity: approx. 2 bales/hour Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Maximum pressure: 16 tons Pressing force: 2.08 kg/cm² Bale size: 1100x700x950 mm Bale weight: approx. 150-250 kg Power supply: 400V / 4kW Year of construction: 1993 Productivity: approx. 3 bales/hour Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Cutting width: 5.8 x 50 mm Year of construction: 2003 Productivity: approx. 120 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 354 mm/s the security level: 3 Power supply: 400 V/4 kW

Maximum pressure: 5 tons Pressing force: 2.17 kg/cm² Bale size: 590 x 390 x 485 mm Bale weight: approx. 25 - 35 kg Power supply: 400V / 2.2 kW Year of construction: 2003 Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Specifications Cutting width: 3.8 x 50 mm Year of construction: 1997 Power supply: 400 V/ 4 kW Price: on request the safety step: DIN 66399 O-2/P-3/T-3/E-2/

Cutting width: 5.8 mm Year of construction: 1993 Productivity: approx. 100 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: 354 mm/s the safety standard DIN 66399: P2 Power supply: 400 V / 4 kW Machine is fully functional, after technical inspection. Price also includes the paint renovation. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!