129,821 used machines on RESALE, but how to find them? Machine Search
S. No.: 12991843 // Power : Up to 13,000 #10 envelopes/hour in draft quality Up to 13,000 #10 envelopes/hour in letter quality Up to 12,000 #10 envelopes/hour in executive quality Image Area: 9.4" x 15" (23.876 x 38.1 cm) Equipment / Additional information: Media Size: Width: 3” minimum to 12.25” maximum Length: 5” minimum to 15” maximum Thickness: Up to 1/4" (subject to weight) Print Resolution: 150, 200, 300, 600 dpi horizontal, 600 vertical Print Modes: Draft, Letter, Executive Documentation
Keyence Agilista 3200W High Resolution Industrial 3D Printer Material Jetting AR-M2 AR-G1L AR-G1H Type: Agilista - 3200W Manufacturer: Keyence Corporation, Japan Date of purchase according to invoice: 18.05.2017 Operating time: 40,985 h Printing time: 1,907 h Specifications: - Printing material: AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (silicone rubber [low hardness]), AR-G1H (Silicone Rubber [High Hardness]) - Support material: AR-S1 (water-soluble support material) - Build space: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 μm, normal Resolution AR-M2: 20μm, AR-H1: 20μm, AR-G1L/H: 30μm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: color touch panel - Dimensions 95 x 70 x 136 cm - Weight 188 kg 3D, 3D Printer, 3D Printer, Agi ...
Cloud m600 advanced inkjet printer, 3 print heads and cables, - Cloud-m600 advanced inkjet printer, 230V AC, - I/O connection cable control voltage 5V+24V DC, - Three print heads red, one without scraper plate, - Three print head cables 3m, - Connection cable for rotary encoders,
Label Printers Industrial Printers Thermal Transfer Direct Thermal Printers 1 x Honeywell Label Printer DMX-A-4212 New from Spare Stock 1 x Honeywell Label Printer DMX-A-6310 New from Spare Stock
ACKLEY TABLET PRINTING MACHINE, MODEL 01511-00038 Year of construction: 2016 Precision rotogravure printing system for tablets and capsules. For pharmaceutical, nutraceutical and confectionery products. Perfect for mid-sized productions. CHARACTERISTICS • adjustable ramp Feed Angle, based on product flow characteristics • continuous motion, multiple-lane carrier bar conveyor feed system that exposes the top surface of the product for inspection and printing • safety enclosure with interlocked doors and enclosed beam path • quick changeover of 60 minutes • requires only compressed air and power for operation • user friendly Operator Control Interface with 17” touch-screen HMI • programmable settings for up to 50 products PRODUCTION • Output: Up to 150,000/h • Printing: alpha-numeric text or graphic logos; can print with solvent or water based ink solutions ...
● System : ANYCUBIC Photon Mono X ● Operation : 3.5 inch touch screen ● Build Volume: 192mm(L)120mm(W)245mm(H) ● Light-source: high-quality filament (wavelength 405nm) ● XY Res.: 0.050mm 38402400(4K) ● Z Axis Res.: 0.01mm ● Layer Res.: 0.01-0.15mm ● Printing Speed: MAX 60mm/h ● Rated Power: 120W ● Material: 405nm UV Resin ● Software : ANYCUBIC Photon workshop ● Connectivity : USB ● Technology: LCD-based SLA ● Printer Size: 270mm(L)290mm(W)475mm(H) ● Net Weight: ~10.75kg
Manufacturer: Fujifilm Model:Acuity LED 1600 Year of Manufacture: 2016 Certifications: - ETL Intertek 3080219 - CE marked Conforms to UL STD 60950-1 - Certified to CAN/CSA STD C22.2 No.60950-1 Find more here - / Contact us at -
Lumex Avance-25 by Matsuura The Lumex Avance-25 is an excellent solution for those who want to enter the world of hybrid additive manufacturing in the premier class. It combines laser sintering and milling in one machining center. They help you efficiently produce complex and precise parts, while benefiting from the flexibility and versatility of additive manufacturing. Details: Year of manufacture: 2015 Spindle hours: 12439 Laser Hours: 3476 Size 250x250x185 Gallery with manufactured components: alesco-gmbh.de/leistungen/additive-fertigung-3d-druck/ With its rugged build and proven performance, the Lumex Avance-25 is an investment worth it. It offers a combination of reliability, precision, and efficiency that makes it an excellent choice for any shop floor or production line. Please do not hesitate to contact us for more information or to arrange a visit. We ...
used
The year of build is 2018. The machine is shrink wrapped in a warehouse, so I cannot get to the meter reading. The last one I have is from 2022. We have not used it very much since that date…probably less than 3 rolls of paper. Color 337 B/W 669 Find more here - / Contact us at -
Label printer, barcode printer, printer, logistic labeling system -Labeler Anvos Model PB 101 FlagTag Type: HA101FTS -Barcode printer manufacturer SATO type: CL408e-2A -Max. Print width: 110 mm -Dimensions: 880/560/H1365 mm -Weight: 104kg
Koenig and Bauer Alphajet Into Inkjet printer MID060 2020, Stainless inkjet printer, auto jet closure, heated ink chamber, touch screen controls, extremely low solvent consumption - 2ml/h (at 20'C) high quality bar codes and 2D codings, 1Ph
Small-character inkjet printer -Machine: is untested and sold as a source of spare parts -Dimensions: 500/600/H1750 mm -Weight: 40 kg
TRUMPF TruPrint 3000 3D Printers GENERAL Project No.: 905844 Quantity: 1 pcs. Manufacturer: TRUMPF Type: TruPrint 3000 Year of Make: 2016 Condition: Used machine Approx (hrs): 3571 DESCRIPTION LASER Laser power Preheating substrate plate 200 degrees Diameter buildable area 300 mm Overall height 400 mm 2 pcs. removable construction and storage cylinders Adjustable layer thickness 20-150/1000 mm GENERAL TECHNICAL DATA Mains fuse 32 A Machine dimensions (LxWxH) approx. 3385 x 1750 x 2070 mm Machine weight approx. 4300 kg NOTE Suitable for stainless steels, tool steels, aluminum, nickel-based or titanium alloys We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as non- ...
Manufacturer: Mimaki Model: TS500-1800 Year of Manufacture: 2013 Type of Machine : Textile Printer Find more here - / Contact us at -
used
Manufacturer: Mimaki Model: UCJV150-160 Type of Machine : UV-LED printer / cutter (160 cm) Condition: good working condition, normal wear Print hours: less than 1,000 Ink: currently no ink in the machine Find more here - / Contact us at -
The operating times are specified with 1387 h. However, this is the time that the printer was connected to the network. The pure printing time is 40 h The printer was serviced regularly until last year in March 2022. Technical data Model AGILISTA-3200W Printing material AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]) Support material AR-S1 (water soluble support material) Installation space 297 × 210 × 200 mm (A4 size × 200 mm) Resolution 635 × 400 dpi Layer thickness High resolution AR-M2: 15 µm Normal resolution AR-M2: 20µm AR-H1: 20µm AR-G1L/H: 30µm Power supply Supply voltage 100 to 240 VAC, 50/60 Hz Power consumption Max. 750 VA Interface Ethernet 10BASE-T / 100BASE-TX Operation Interactive color touch panel Software Name Mode ...
I think the machine dates from the 1990s. The machine was used until last year. It has been replaced by a newer machine. Have a nice day, This is an MPM Corporation screen printing machine. The model is as follows: UP2030. Find more here - / Contact us at -
DTG PRINTER Kornit storm HD6 YEAR 2017 MADE IN ISRAEL EQUIPMENT: TEXTILE DIGITAL PRINTER MODEL: STORM HEXA SERIES LOCATION: (Mexico City) Specifications DTG T-Shirt Printing Machine Prints one t-shirt in approximately 40 to 60 seconds Features 2 pallets for nearly simultaneous printing Equipped with 2 control monitors Requires a two-phase plug Initial setup assistance for printing Does not come with inks or spare parts Printing time per t-shirt: 60 to 90 seconds Is already packed and stored Find more here - / Contact us at -
2021 Videojet 1520 TubeWriter 360 and Videojet 1520 Labels can be damaged or even peel off altogether when exposed to storage conditions or machinery, disrupting experiments when unidentifiable samples need to be replaced. Any tube, any vial, any size: The TubeWriter 360 prints on anything that fits underneath the inkjet printhead, including the side or top of any tube, vial, histology cassette, microscope slide, cryovial and much more with clear labels that ensure you ensure that they are easy to identify and reduce the risk of confusion. This machine, after installation, was only used for training purposes and never for operational purposes. So it can be seen as a brand new machine. The photo below shows different molds/holders that may contain different materials that you want to label. Find more here - / Contact us at -
We sell 25 x Intermec PX 4i printer In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and components in refurbished conditions from all these manufacture ...
Essemtec SP600 SMT stencil printer Find more here - / Contact us at -
Component size: Length 1700 x Width 1050 x Height 1050 mm Printing method: The patented VFGF (Variable Fused Granulate Fabrication) technology is a further development of pellet 3D printing with variable nozzle opening. It prints in high resolution only where necessary, for example on visible surfaces, and efficiently fills inner areas with thicker webs. In this way, VFGF combines the advantages of FDM (Fused Desposition Modeling) for fine details and complex geometries with those of granulate printing (high application rates, material variety, lower costs). Intelligent algorithms ensure the right amount of material in the right place at all times, even for complex shapes with overhangs or support structures. Areas of application: For prototypes, individual parts, small series and also for higher quantities. By melting in a specially developed screw extruder, high throughputs ar ...
Manufacturer: EKRA Model: X4 PROF Weight: 920 kg Year of Manufacture: 2008 Nominal Voltage: 230 V AC Frequency: 50/60 Hz Working Voltage: 24 V DC Number of Phases: 1 Power: 1.2 kW Circuit Breakers: 16 A Pressure: 6 bar Maintenance status: Machine is not currently serviced, but is fully functional Operating hours: unfortunately no counter in the system; machine has been running on average in 1-shift operation since the beginning of 2008 Accessories: 2x squeegee 220mm, 65°; 2x squeegee 350mm, 65°; 2x squeegee 350mm, 45°; 2x squeegee 450mm, 65°; 2 support plates 275mm Documentation: complete system manual in paper form Operating system: WIN XP Software version: SCBDRV V6.11-2 Find more here - / Contact us at -
Hollanders - ColorEdge 230 Precision cutting system for textile applications The ColorEdge 230 from Hollanders is a professional cutting system specially developed for the precise cutting precise cutting of textile materials. With a working width of 230 cm, This machine is ideal for roll-to-roll applications and guarantees clean, precise cuts, that meet the highest demands. Technical highlights: - Working width: Up to 230 cm. - Cutting technology: High-precision roll-to-roll cutting for even and accurate results. results. - Material compatibility: Suitable for a wide range of textiles (e.g. polyester). - Operation: Simple and efficient processing for maximum productivity. - Construction: Robust, durable design for continuous professional use. - Dimensions & weight approx. 320 x 200 x 130 cm (WxHxD), approx. 800-850 kg Spare parts renewed - PVC transport rollers (11/2023) ...
description: For printing of labels, bottles, packaging etc: prints only in black colors, incl. frame Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking forward to hearing from you. All information is supplied without guarantee.
HR 2K inkjet printer barcode labeling RA2309 Printer manufacturer: REA-JET Printer type HR Operation: Control unit with control panel Print type: Inkjet printer interfaces: Eternet Stainless steel control unit in IP65 design Full-color graphic display, diagonal of 14.4 cm (5.7 inches) Graphic user guidance in many languages Support for True Type Fonts (TTF) and Unicode character set Operation: ten-key keypad, cursor block, push and turn operation REA JET HR 2K (with 2 writing heads, up to 25.4 mm writing height) Maximum speed of the system: 762m/min at 60 dpi resolution. 142m/min at 300 dpi. Maximum is 600 dpi. Condition: Worked until dismantling, we have no cartridges available for prior testing. Electrically everything seems to work perfectly (see photos) Abrasion on the rotary encoder (see photo) and USB cover is missing (see foro). Prices net plus VAT ex central warehouse Dr. Sonn ...
used
Manufacturer:Prodways Model: ProMaker LD10 Year of Manufacture: 2018 Type of Machine : 3D Printing Machine Find more here - / Contact us at -
maximum number of results exceeded
please refine your search
20 € 
