hp printer used for sale

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Spare part: hydraulic control block comes from an Atlantic press brake type: HPT 13536 -Manufacturer: Rexroth -Valve type: S-4WE 10 F32 CG24/9Z4 C -Manufacturer: Sauer Sundstrand -Valve type: D24 SWH-G02-B2- -20 -Voltage: V -Pressure max: bar -Price: for all 5 pieces of valves -Dimensions: 600/700/H600 mm -Weight: 67 kg

hydraulic PRESS with hot platens by with thermal oil model COLOMBO REMO second hand machine DRILLED SOLID STEEL PLATEN for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3450 x 1400 n.08 cylinders diam.mm. 80 max. thrust Ton. 150 intermediate worktop ( 3 worktops , 2 work compartments ) hydraulic pump motor power Hp 4 heating by with thermal oil weight kgs. 9.500 volt. 380/50

Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg

pressure: 200 t nominal power: 2000 kN stroke length max.: 1700 mm working feed: 50 mm/sec weight of tools max.: 50000 kg voltage: 400 V table-size: 4.800 x 2.400 mm total power requirement: 99 kW weight of the machine ca.: 113 t dimensions of the machine ca.: m passage width: mm stroke: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Handover: in the current state as viewed -Use: as a spare part stock -Hydraulic unit: from Gruse lifting table ELT 1.5-10-1 -Motor: HPI 2.3 kW/2750 rpm -Hydraulic pump: HPI A5087577 -Price: per piece -Number: 2 pieces -Dimensions: 550/700/H180 mm -Weight: 39 kg

I am selling a panel sizing saw HOLZMA HPL380/38/22, built in 2007. Cutting surface 3800x2200mm + rear lift table. Cutting height 90mm. Max saw blade diameter 380 + 200mm Joint area W.5924mm x D.9963mm 8 pcs gripper with pneumatic regulator Side positioning roller from below. Cadmatic 4.1 optimization software included. Very good condition. Available the same.

Pressure intensifiers, pressure medium converters, flow control valves -Operating pressure ranges -Hydraulic part (power part): 2 - 32 bar -Pneumatic part (control part): 3 - 10 bar -Volume flow: max. 16 l / min. at (6 bar inlet pressure, load-dependent) -min.: 2 cc/min. (Hydraulic oil with a viscosity of 21 mm³/s [3°E] at 50 °C) -Screw connections hydraulic side: G3/8 pneumatic side: G1/8 -Dimensions: 140/70/H68 mm -Weight: 1.1 kg

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from order picking forklift type ECE 20 -Hydraulic pump: Type 50125677 -Motor: Type AU3480 24V 1.5kW -Dimensions: 200/175/H360 mm -Weight: 9.7 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from picking truck type ECE 118 -Hydraulic pump: type 50125677 -Motor: Type AU3480 AMJ5729 24 V 1.5 kW -with: tank and control valve -Number: 4x unit available -Price per piece -Dimensions: 200/180/H370 mm -Weight: 10 kg/pc.

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from picking truck type ECE 20 -Hydraulic pump: type 5090979 -Motor: Type AU3480 24V 1.5 kW -with: tank and control valve -Dimensions: 200/180/H370 mm -Weight: 9.8 kg

Control cabinet - cooling unit, control cabinet air conditioning unit, distribution cabinet, heat exchanger spindle cooler -Manufacturer: Harbor, heat exchanger spindle cooler from CNC machining center Santenberg GTC S 2 -Type: HPW-10AR -Voltage: 110V 50/60Hz -Dimensions: 250/75/H580 mm -Weight: 5.7 kg

Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light alloy cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, hydraulic short-stroke cylinders, telescopic cylinders -Manufacturer: Lukas FH, 3-stage telescopic cylinder type HP20/T180 -Total stroke: 180 mm -Height: retracted 175 mm -Dimensions: 230/200/H175 mm -Weight: 30.2 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Yale, hydraulic pump hand pump -Type: HPS-1.7 -Pressure range: max. 700 bar -Tank capacity: 0.7 l -Quantity: 1x hand pump available -Dimensions: 720/200/H170 mm -Weight: 8.5 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from electric high lift truck Linde L 12 -Hydraulic pump: Type A5088869 -Motor: 24 V 2.2 kW -Hydraulic tank -Dimensions: 305/157/H540 mm -Weight: 11.6 kg

General SKU360U949 MakeÄktaprocess LocationBarneveld CEcheck Main Features MaterialStainless steel Motor0.37 KW Specified Features - Miscellaneous filter Motor0,37kW, 220-240/380-420Volt, 1370rpm Capacity6Ltr/h Miscellaneous filters MaterialStainless steel General No.29000032 Year of construction2011 Mounted on wheelscheck Floor space1,7x0,90 m Total height1,64 m Weight370 kg Extra information Max system pressure 6 bar at 40°C, 3 bar at 60°C, pneumatic supply 3-6 bar, max power 1500 VA, 230 volt, with B&:R touchscreen display, stainless steel keyboard, Lewa pump unit, type EEC0000-13, cap. 6 ltr/hour, Endress+Hauser flowmeter Powdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyPlastic & polymersAgrochemicalsSpicesCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCo ...

General SKU440W1452 MakeAgilent Technologies LocationBarneveld CEcheck Type1100 series Specified Features - HPLC Capacity100x 2 ml vials in 1 tray, 40x 2 ml vials in 1/2 tray, 15x6 ml General No.DE43628255 Year of construction2005 Floor space1,00x0,60 m Total height0,80 m Weight100 kg Extra SpecificationsHPLC with autosampler.UV-visible detectors, pumping system, fluorescence detector, LC/MSD unit, refractive index detector, GPC/SEC system, Micro plate sampler, 220, Chem station&:nbsp:all product nr:s:G1314AG1312AG1379AG1316AG1367AG1330BPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyPlastic & polymersHPLCAgrochemicalsSpicesCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeverages ...

Press force: 135t, bending length: 3000mm, nominal bending length: 2600mm, frame width: 2600mm, throat depth: 250mm, ram stroke: 120mm, working speed: 7mm/s, machine weight: approx. 6800kg. An on-site inspection is possible.

Manufacturer: Oerlikon Model: Plasmatome 20 HPC ( without cutting table ) Year of Manufacture: 2012 Cutting Range: 2,000 mm x 6,000 mm (2 x 6 meters) Material Thickness Capacity: Up to 35 mm Cutting Method: Plasma Cutting Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Hydrap Model: HPSK 80 Year of Manufacture: 1994 Type of Machine : Hydraulic Press Condition: Used Operating hours: 27,436 h Press Performance - Nominal force: 800 kN - Maximum ram stroke: 300 mm - Overrun distance: 30 mm - Overrun time: 120 ms - Safety distance: 196 mm - Drive type: Hydraulic - Press orientation: Vertical - Number of cylinders: 1 - Cylinder diameter: 210 mm Working Area - Throat depth to ram centre: 250 mm - Minimum daylight table to ram: 500 mm - Clamping table length: 700 mm - Clamping table width: 500 mm - T-slots to DIN: 650 mm - Slot width: 22 mm - Slot arrangement: Diagonal - Clamping plate thickness: 150 mm Electrical Data - Voltage: 400 V - Frequency: 50 Hz - Current type: DC - Drive power: 22 kW - Rated current: 45 A - Mechanical Data - Weight: 6.5 tonnes - Oil viscosity: HLP 46 - Oil quantity: 485 litres Find more here - .ucymachines/  ...

General SKU042B298 LocationBarneveld MakeCINC - Costner Industries Nevada Corporation TypeModel V5-HPHT (High Pressure High Temp.) No.05HPHT01 Main Features MaterialStainless steel Motor5.5 KW Specified Features - Separator Separator:Centrifugal Separator: (1x) Motor/drive unit make Fluid, type MD-55.22 Max. rotor speed3600 Rpm Mounted on stainl. steel framecheck MaterialStainless steel 1.4404 (316L) General Year of construction2001 Floorspace0,6x0,6 M Total height1,7 M Weight300 ATEX designedcheck Extra information - Max. pressure 20 bar (test pressure 27,3 bar) - With jacket (I= 2,5 + 0,8 Ltr vacuum/16 bar, test pressure 22,1 bar) - Max. temperature 200 Degr. C. - Motor 5,5 KW, 400 Volt (Ex) - Capacity 6,5 Ltr - With mechanical sealGeneric medicinesBiotechnologyFeed additivesDiscountCosmeticsFood additivesLubricants & oleoDairySolid pharmaceuticsBeveragesDyes & p ...

Inv. Num. : 9123 Type: OPTIMAT HPL 11/43/22 Producer: HOLZMA Created: 2003 Parameters: Saw blade diameter: 450 mm Table dimensions: 4300 x 2200 mm Equipment: Loading platform

Robot Yaskawa Motoman HP6 NX100 control complete Year of Make: 2004 Control: NX100 Max. load capacity. 6 kg Max. working range: approx. 1378 mm Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Horizontal panel saw with pressure beam Type: HPP 200/32/32 Manufacturer: Holzma Year: 2015 Avaílable: 10/2026 Cross section: 3200x3200 mm Optimization directly on the CADPLAN 4 saw - JUST IN TIME Large PICA II printer Two engines, main unit 13kw, pre-cut 1.1kw Package for cut-outs Grooving package Additional two-finger collet for the 175mm position 3x set of disc and pre-cut Machine in good condition, fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

bushing cut-off , PKO diameter range 10-22 mm number of dies 4 number of stations (incl. cut off) 7 cutting length 200 mm shaft length under head 160 mm output - pieces/min 60 max. thread length 95 mm max. width acros flats 32 mm

Panel saw manufactured in 2018. This HOMAG PROFI HPP 300 / 43 / 43 features a cutting length of 4,300 mm and a cutting width of approximately 4,250 mm. It has a maximum saw carriage feed speed of 130 m/min and a maximum saw blade diameter of 350 mm. If you are looking to get high-quality panel cutting capabilities, consider the HOMAG PROFI HPP 300 / 43 / 43 machine we have for sale. Contact us for further details.

Panel saw manufactured in 2008. This HOLZMA HPP 350/43/38 features a saw blade projection of 80 mm and a cutting length of 4300 mm, providing efficient cutting capabilities. It includes a powerful main saw motor of 13.5 kW and a scoring saw motor of 2.2 kW. If you are looking to get high-quality panel cutting capabilities, consider the HOLZMA HPP 350/43/38 machine we have for sale. Contact us for further details.

Impressions=0 m, Condition= New , Availability= 2026-07-07, 16” Large full touch LCD screen. Fully automatic paper cutting function. Program storage capacity of up to 300 programs. 90,000 motion storage capacity. Maximum trench speed 36m/min. Cutting speed: 42-45 pcs/min Trench precision 0.01mm. Fully automatic paper cutting function. Eight language options. Measurement and blade movements can be seen on the screen. Metric system options. Data transfer via USB and programming and adjustment by PC. New modern design. It has many security measures. German security photocells. German hydraulic system. Italian oil pump. Panasonic servomotor. Siemens PLC. Italian balance valve.

PRESS FORCES   total force (nominal): 1000 to PRESS TABLE   table surface (left-right): 1800 mm   table surface (front-back): 1300 mm SLIDE   stroke: 500 mm

A Schneeberger CNC profile and tool grinding machine including robot cell, coolant filtration system and cooling unit is available. Travel X/Y/Z: 420mm/310mm/340mm, spindle power: 15kW, speed: 6000rpm, spindle interface: HSK80, robot: Fanuc, tool positions: 10. Machine dimensions X/Y/Z: approx. 2500mm/2500mm/2200mm, weight: approx. 9000kg, control: Fanuc 160i-MB, software: Schneeberger Quinto 4, operating hours: approx. 31893h. Documentation available. An on-site inspection is possible.

Panel saw manufactured in 1999. This HOLZMA HPV11 features a maximum panel dimension of 2,100 x 4,100 mm and can cut up to 6 panels simultaneously. It includes lifting tables and a Liftomat, along with an automatically height-adjustable clearing table. If you are looking to get high-quality cutting capabilities, consider the HOLZMA HPV11 panel saw we have for sale. Contact us for further details.

A hydraulic two-column press brake Atlantik is available. Press force: 135t, bending length: 3000mm, throat depth: 250mm, ram stroke: 120mm, overrun time: 84ms, safety distance: 134mm, machine dimensions X/Y/Z: approx. 3500mm/1700mm/2300mm, weight: approx. 6800kg. An on-site inspection is possible.

ATEX filter press from the TEPSA brand model HPLE of 3.3 m2, made of iron. Technical characteristics HPLE Model Year of manufacture 2017 Working pressure of the hydraulic unit 312 bar Number of Plates 15 Maximum plate capacity 15 Plate dimensions 470x470 mm Maximum filtration pressure 16 bar Equipment Setup ATEX Electrical panels Hydraulic power plant Closed execution Working conditions Pressure In your state

Key data: 250 KW, 400 V

SES Gas CHP HPC 250 N Natural gas electricity and heat generator from 2015, unknown operating hours, closed module with pump station. 1 available 239 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: Leroy Somer LSA 46.2VL12 C 6/4, 315 KVA Manufacturer: SES Model: HPC 250 N Type: Natural Gas CHP Serial Number: P15024 Power [KWel]: 239 Power [KWth]: 365 Engine: MAN E2842E312 Engine power [KW]: 250 Year of Make: 2015 Operating hours: unknown Weight unit [kg]: 4,000 Dimensions LxWxH [m]: 4.50 x 1.85 x 2.45 AC Generator Leroy Somer LSA 46.2VL12 C 6/4 Manufacturer: Leroy Somer Model: LSA 46.2VL12 C 6/4 Type: AC Synchronous Generator Serial Number: 323575/1 Power [KVA]: 315 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 455 Speed [1/min]: 1,500 Year of Make: 2015 Weight [kg]: 885

pressure: 100 t Working width max.: 300 mm serial number: 55505 voltage: 380 V weight: 5000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 300 t chamfer lenght: 4100 mm distance between columns: 3710 mm stroke - stepless adjustable: 250 mm column arm: 330 mm dayligth: 500 mm table height: 940 mm table width: 250 mm working feed: 7.0 mm/sec return speed: 90.0 mm/sec Control: konv. operating pressure: max. 305 bar voltage: 380 V total power requirement: 22.5 kW weight: 25200 kg range L-W-H: 4320 x 2100 x 3370 mm well-maintained condition () - in checked condition - machine video - https://www.youtube.com/watch?v=rPOBwTfVReo Equipment: - simple, conventional hydraulic press brake - swiveling control panel, left front - electro-motoric back stop (X axis) adjustment via front control panel (button) with analog position display fine adjustment via handwheel, front - with 3x stop fingers, manually adjustable - electro-motoric depth adjustment (Y1+Y2 axis) with analog position display - 1x split set of 85° deer foot ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 20400 € : 391.68 € : 80 mm : 245 mm : 3 : 4 kW : 6 m/min : 100x20 mm / 2000 mm, 80x2 : 125x25 mm / 600 mm, 60x5 : 45x45 mm / 500 mm, 15x15 : Ø 50 mm / 500 mm, Ø 15 mm : Ø 100x2,5 mm / 1.200 mm, : 80x25x3 mm / 800 mm, 25x1 : 70x70x3 mm / 1.300 mm, 25 : 80x80x8 mm / 800 mm, 30x3 : 70x70x7 mm / 700 mm, 30x3 : UPN 140 / 1600 mm, UPN 12 : UPN 140 / 1.600 mm, UPN 1 : IPN 120 / 600 mm, IPN 80 : 1450 mm : 1000 mm : 1400 mm : 1700 kg 3 motor driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rolls positions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to the CE regulations WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTe ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 51900 € : 980.91 € : 120 mm : 390 mm : 3 : 15 kW : 2/7,5 m/min : 125x25 mm / 1.200 mm, 30x : 200x50 mm / 1.000 mm, 100 : 65x65 mm / 750 mm, 20x20 : Ø 80 mm / 850 mm, Ø 20 mm : Ø 160x4 mm / 2.800 mm, Ø : 120x40x4 mm / 1.800 mm, 3 : 90x90x5 mm / 1.800 mm, 30 : 120x120x12 mm / 1.200 mm, : 100x100x10 mm / 1.200 mm, : UPN 220 / 1.000 mm, UPN 1 : UPN 220 / 1.200 mm, UPN 1 : IPN 220 / 1.000 mm, IPN 8 : 2000 mm : 1650 mm : 1900 mm : 4450 kg 3 rolls driven (hydromotor and planetary gearbox) shafts made of special steel,hardened and ground hydraulic adjustment of the 2 lower rolls hardened universal rolls lateral rolls hydraulic adjustable in 3 axes horizontal and vertical operation mobile operating panel 2 working speeds digital read out (3 axes) machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE M ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 34200 € : 653.22 € : 100 mm : 315 mm : 3 : 7.5 kW : 7 m/min : 100x20 mm / 800 mm, 30x10 : 200x30 mm / 1.200 mm, 160 : 60x60 mm / 750 mm, 15x15 : Ø 75 mm / 800 mm, Ø 15 mm : Ø 125x2,5 mm / 1.400 mm, : 100x40x4 mm / 1.300 mm, 2 : 80x80x5 mm / 1.500 mm, 25 : 100x100x12 mm / 1.000 mm, : 100x100x10 mm / 1.000 mm, : UPN 180 / 900 mm, UPN 30 : UPN 180 / 1.000 mm, UPN 3 : IPN 180 / 1.000 mm, IPN 8 : 1465 mm : 2000 mm : 1700 mm : 4000 kg 3 hydr. driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rollspositions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to theCE regulations WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoT ...

pressure: 1.000 t nominal power: 10.000 kN stroke length max.: 1.650 mm working feed: 62 mm/sec weight of tools max.: 40.000 kg voltage: 400 V total power requirement: 420 kW weight of the machine ca.: 254 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 11800 € : 226.56 € : 60 mm : 215 mm : 215 mm : 3 : 1.5 kW : 4 m/min : 80x20 mm / 1200 mm, 40x10 : 120x25 mm / 600 mm, 50 x : 50x50 mm / 800 mm, 20x20 : Ø 50 mm / 800 mm, Ø 20 mm : Ø 100x2 mm / 1600 mm, Ø 6 : 80x40x3 mm / 1400 mm, 40x : 70x3 mm / 1600 mm, 40x2 m : 70x70x7 mm / 1000 mm, 40x : 70x70x7 mm / 1200 mm, 40x : 1000 mm : 1400 mm : 1650 mm : 950 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 260 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2026 : 090180 : prompt, Zwischenverkauf v : Türkei : 8300 € : 160.19 € : 1 : 50 mm : 152 mm : 162 mm : 3 : 1.1 kW : 4,5 m/min : 60x10 mm / 600 mm, 20x10 : 100x15 mm / 600 mm, 50 x : 35x35 mm / 600 mm, 15x15 : 35 mm / 600 mm, Dm. 20 mm : 70x2 mm / 1200 mm, Dm. 25 : 70x30x3 mm / 1500 mm, 30x : 50x50x3 mm / 1600 mm, 20x : 50x50x6 mm / 600 mm, 30x3 : 50x50x6 mm / 900 mm, 30x3 : 810 mm : 950 mm : 1500 mm : 500 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 15900 € : 305.28 € : 50 - 60 mm : 180 mm : 180 mm : 180 mm : 3 : 3.75 kW : 6 m/min : 60x10 mm / 500 mm, 20x5 m : 80x20 mm / 500 mm, 50x5 m : 32x32 mm / 400 mm, 12x12 : Ø 35 mm / 350 mm, Ø 10 mm : Ø 60x2 mm / 600 mm, Ø 15 : 50x25x3 mm / 450 mm, 20x1 : 45x3 mm / 600 mm, 20x2 mm : 60x60x6 mm / 650 mm, 30x3 : 50x50x5 mm / 550 mm, 30x3 : UPN 80 / 600 mm, UPN30 / : UPN 65 / 600 mm, UPN 30 / : IPN 80 / 600 mm : 1200 mm : 850 mm : 1200 mm : 955 kg 3 mech. driven rolls (brake motor) hardened shafts lower rolls hydraulic adjustablehardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation digital read out for the position of the lower rolls machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech ...

MIKRON HPM 800 U ist ein 5-Achsen Bearbeitungszenter für Präzision, hohe Genauigkeit und Zuverlässigkeit. Tisch 630×440 mm, 5 T-Nuten, Last 800 kg; Verfahrwege X800 Y800 Z550 mm; A +91/-121°, C 360°. HSK-A63, Abstand 600 mm; 115 Werkzeuge, Ø max 80 mm (160 frei), L 350 mm. 0–20000 t/min; Vorschub 0–20000 mm/min; Eilgang 45 m/min; Beschl. 6 m/s; Vorschubkraft 6000 N; 3×400V 50Hz; 55 kW; Gewicht ~15000 kg; Abm. 3505×3100×2980 mm. Zubehör: Hochdruckkühlung, Papierfilter, 2 Paletten, Werkstücktaster, Laser Werkzeugkontrolle, Späneförderer. Für enge Toleranzen in Automotive, Luftfahrt, Medizintechnik, Uhrenbau Technische Daten ohne Gewähr

Impressions=0 m, Condition= New , Availability= 2026-08-20, Max. Width: 1300 mm Max. Sheet Size (L × W): 1200 × 900 mm Min. Sheet Size (L × W): 500 × 400 mm Max. Sheet Height: 1600 mm Min. Sheet Height: 700 mm Max. Lifting Capacity: 2000 kg Voltage: 380/220 V Power: 12 kW Net Weight: 3400 kg Machine Dimensions (L × W × H): 292 × 202 × 222 cm Packing Dimensions (L × W × H): 310 × 220 × 210 cm Air-Blowing and Vibrating System

Impressions=0 m, Condition= New , Availability= 2026-08-20, 16” Touchscreen Fully automatic paper cutting function Storage capacity for up to 100 programs Storage capacity for up to 10,000 operations Maximum back gauge speed: 36 m/min Cutting speed: 45 cuts/min Two HSS blades Display resolution: 0.01 mm Positioning accuracy: 0.01 mm Back gauge speed: 16 m/min 8 language options Data transfer via USB and PC programming CE and FCC certified Panasonic servo motor Siemens PLC American (AB) safety photoelectric cells French (TE) main electronic components German (WESSEL) hydraulic system Japanese (OMRON) electronic system Italian oil pump Italian balancing valve Excellent condition

pressure: t distance between columns: mm stroke: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Homag SawTeq B-300 flexTec equipped with Yaskawa D200 Robot panel manipulator Manufacturer: Homag Type: B-300 flexTec/Profi HPP300/43/43/F M-Nr..: 0-240-69-1263 Year: 2020 Control: Cadmatic 5 Ardis Datensteuerung Labelling: Pica II im Druckbalken YouTube:

Offer 26289 Technical data approx. : - CNC flame cutting machine with 2 burners as shown - 2 burner heights + tilt adjustable - Track gauge approx. 4.2 m - Track length approx. 7.5 m - Track height approx. 0.5 m - Space requirement approx. L 8 x W 7.5 x H 2.3 m - Weight approx. 3 T - Without support table

Holzma HPL380/43/22 Profi Manufacturer: Holzma Type: HPL380/43?22 Profi M-Nr..: 0-240-06-8971 Year: 2010 Machine control: Holzma CAD Matic 4 – Professionel, 2D/3D, Ethernetanschluss Windows XP embedded 19″ TFT touchscreen DVD, USB Power: ca. 28 KW – 40A – 3 Ph/50Hz Saw length: 4.300 mm Dept/- panelwidth: 4.300 mm Main saw: 18 KW Bookthickness: 95 mm Max. saw thickness: 82 mm Saw feed speed: 130 m/min Scoring saw: 2,2kW Scorer saw blade: 180 4,6 45 mm Side press: Automatic Holzma patented side press system Pressure beam: Automatic , with programmable pressure Clamps: 7 Sclamps, 75/275/475/1050/1850/2650/3450 Programmable Programmable panel beam: stepless 1-80 m/min. Air cushion tables: 4 tables Table dimensions: 2.170650 mm Label printer: Pica 108 Loading: Rearside automatic lift table . Dimensions: 4.300 2.200 mm, fitted with heavy duty rolls Destacking: Panel surface protecti ...

pressure: - t distance between columns: - mm stroke: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.