hp printer used for sale

Mitutoyo SJ-400 Surface Roughness Meter with Many Accessories: 12 additional buttons 11 Comparison Tiles Some printer rolls The device is fully functional. #8061 Net prices plus VAT

• 1-door style, chamber size 650 x 650 x 650 mm • Adjusted for sterilization process B for dry good products for production, clean room supply and production support • 1 loading cart with 3 wire shelf, without transfer trolley • Pressure vessel primary 272 ltr., secondary 69 ltr. • Permissible working pressure 0.31 MPa, permissible working temperature 145 °C • 3-channel plotter Yokogawa • PLC Siemens S7-300, Siemens Simatic Multi Panel Touch • Printer • GMP-compliance, GAMP4-compliance, CE-compliance according to EU-Machine Directive 2006/42/EC, EU Low Voltage Compatibility 2006/95/EC and Electromagnetic Compatibility 2004/108/EC • Available documentation: FAT Procedures and Results, Control System Validation, Pressure Vessel/Piping Manufacturing Documentation • Electr. conection 400V/50Hz

• Weighing range max. 30,000 g • Weighing surface approx. 400 x 660 mm • Resolution D= 2 g • Accuracy e= +/- 10 g • Belt speed 42 m/min (adjustable) • Load cell SB 60.2 • Stainless steel version • Without printer • Drive 230V/50Hz

• Weighing range max. 750 g • d=0.05 g • e=0.1 g • Load cell EC 2000 • Belt run from left to right • Belt width 145 mm • Centre distances infeed belt/weighing belt/outfeed belt 480/240/480 mm • Bad ejection by blowing nozzle • Without printer • Non calibratable • Drive 230V/50/60Hz

• Weighing terminal ID7 • Weighing capacity max. 150 kg • Load cell KCC150s, max. 150 kg • Weighing surface w x d 600 x 800 mm • Printer GA46 • Mounted on stainless steel table • Last maintenance 10/2021 • Connection 100-240V/50/60Hz

• Weighing range max. 750 g • d=0.05 g • e=0.1 g • Load cell EC 2000 • Belt run from left to right • Belt width 190 mm • Centre distances infeed belt/weighing belt/outfeed belt 480/240/480 mm • Bad ejection by pneum. ejector • Without printer • Not calibratable • Protective cover weighing range removable • Height adjustable • Drive 115/230V/50/60Hz

• Weighing range max. 750 g • d=0.05 g • e=0.1 g • Load cell EC 2000 • Belt run from left to right • Belt width 190 mm • Centre distances infeed belt/weighing belt/outfeed belt 480/240/480 mm • Bad ejection by blowing nozzle • Without printer • Non calibratable • Drive 230V/50/60Hz

• Weighing range max. 750 g • d=0.05 g • e=0.1 g • Load cell EC 2000 • Belt run from left to right • Belt width 145 mm • Centre distances infeed belt/weighing belt/outfeed belt 480/240/480 mm • Bad ejection by blowing nozzle • Without printer • Non calibratable • Drive 230V/50/60Hz

• Weighing range max. 750 g • d=0.05 g • e=0.1 g • Load cell EC 2000 • Belt run from left to right • Belt width 145 mm • Centre distances infeed belt/weighing belt/outfeed belt 370/270/470 mm • Bad ejection through pneumatic pusher • Without printer • Non calibratable • Drive 230V/50/60Hz

Herma132M HC wrap-around labeling machine for vials, etc. (400/min.) Herma132M HC wrap-around labeller (400/min.), with infeed rotary table suitable for PP-trays with inner dimensions of 428 x 244 x 42 mm (LxWxH), Videojet DataFlex 6530 thermal transfer printer (up to 3 lines each of max. 18 variable alphanumeric characters) for printing the variable data on the labels (expiry date, batch no., etc.) with camera print and code checking, luminescence sensors for checking the presence of the labels with reject system, Siemens IPC 277E 12 color touchscreen, Siemens S7-1500 PLC, includes format parts for 2R vials (diameter of 16 +/- 0.25 mm x height of 35 +/- 0.5 mm) and 3 ml. vials (diameter of 16.25 +/- 0.15 mm x height of 35 +/- 0.5 mm), vials are leaving the labeller at 90° feeding (in as-new” condition)

• Set up for bottles • Throughfeed with indexing stars for object diam. 24 and 29 mm • Without conveyor belt • Weighing range 2 - 500 g • Capacity max. 200 weighings/min • e=d 0.1 g • Passage from left to right • Paper printer • Bad ejection by pneumatic pusher • Various interfaces (Ethernet, USB, CAN, RS 232, RS 422) • HC operating terminal • Calibrated until 2014 • Height adjustable • Connection 115/230V/50Hz

Garvens TopLine VS2 inline checkweigher with reject and printer, weight range up to 300 g, calibration value e=0,1 g, accuracy +/-0,1 g, belt width approx. 120 mm, length of infeed & outfeed belt approx. 250 mm, length of weigh cell approx. 200 mm, running from left to right, capacity up to 400 weighings per minute, electrics 230V/50/60Hz, machine floor space approx. 900 x 900 mm (WxD), machine height approx. 1400 mm, machine net weight approx. 85 kg

Print roller, printer roller, spindle, anvil roller, pressure roller -Print roller: unfortunately no type designation -Technical dimensions: see photos -Dimensions: 295/100/H100 mm -Weight: 5.7 kg

Digital Inkjet roll printer Make HP - Hewlett Packard Model Designjet Z6100 - 60` Working width 60" or 150 cm Available Direct

Overview This whole brewery, including a complete can filling line, a complete glass filling line, and other extensive brewing equipment was built up in 2015. Most of the equipment is from 2017, is still installed and can be visited. CANNING ROOM Canning line, Wild Goose MCE-250 4-head + accessories, conveyor belts, flow meters, labelling machine, date coder, air compressor,stare parts, etc. CCT tank, 20 HL IFIND CCT tank, 30 HL, Staes   CIP installation CMC-KUHNKE SEAM Scanner + Laptop 1 2020 Labeller, self-adhesive, CDA VIDE /ROOF Glycol tank, pipes, pumps (3), control unit, etc. Kaeser airboxcenter, compressor, airdryer, oil/water seperator, etc. 3x Chillers Cool Tower ICS Cool Energy Small air compressors, pump, storage racks, etc MALT STORAGE Air compressors, storage racks, pipes, etc. MALT GRINDER Complete with all pipes, transportsysteem, blowers, etc. BREWERY Brewhouse Johan Alb ...

AlTech Labeler Top and Bottom incl. Sato Printer Top and Bottom The machine is in stock and is immediately available.

Etis System 4 Labeler KBA Printer Top Bottom Applizer Etis System 4 Labeler with KBA printing system - several in stock

Top Labeler with Long Split Ribbon Allen Printer Control and Device to Glue Labels Over Corner

Bottle labeler with 3 roll system incl Markem Imaje printer and 2 plates

Used production line for packaging juices. The line consists of: - TRIBLOCK ARROW PET 9/9/3, NC9 SCRUBBER (9 GRIPPERS) , NEPFILLER (9 POURERS), CAPPER (3 HEADS) STM 2014 - BUFFER TANK 1000L STM 2014 - CIRCULATION TANK 80L STM 2014 - PUMPS WPS 4 - 2 PCS, RETURN PUMP CIP WPS 6 1 PCS STM 2014 - NUT FEEDER BCF1 STM 2014 - AIR CONVEYOR SET STM 2014 - PLATE CONVEYOR SET STM 2014 - ROTARY COLLECTING TABLE STM 2014 - PET BOTTLE ORIENTATOR SB6000 STM 2013 - SCREW CAPPER ZB 6000, NUMBER OF HEADS 6, OUTPUT 6000/HOUR STM 2013 - PRINTER HITACHI INK JET UX HITACHI 2016 - LABELLING MACHINE EC-09/ LABELER EC-09 BIENKOWSKI 2018

Fully hydraulic closing system, MC 4 control system with color monitor, integrated control panel and built-in disc drive. 1 complete plasticizing system for thermoplastics with a screw diameter of 45 mm - Levels for the foundation of the Nolato machine - Hydraulic blockade of reverse rotation of the auger - Hydraulic auger drive with standard speed - SVO open nozzle in 2-piece design (nozzle body with screw-in nozzle). - A device for sorting good and defective parts. Pneumatic pendulum. Pendulum speed approx. 3 sec. Free-standing device under the machines discharge shaft. Including electrical standard connector and software (Pos. 42.42). - Single pneumatic valve on the movable mold clamping plate for the blowing function (1 piece of 3/2 separating valve with 1 magnetic coil). Control to choose between road/time or time/time. Possibility to manually set the flow using 1 thrott ...

Sell multi-format, multi-capacity bottling line for milk or other highly sensitive products. Including: bottle infeed and outfeed conveyors, gravity and weight-controlled filling vibrating bowl for cork removal integrated, disengageable screwer labeling machine inkjet printer for DLC on bottles stainless steel cabinet for storing other bottle formats spare parts and instructions. output: 750 to 1250 units per hour

MAIN FEATURES: In its current state, our innovative line is suitable for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. The production line is a compact, fully equipped system, from bottle-blowing to water treatment to shrink wrapping, all production stations are integrated in the line. The entire production line is a coordinated system, made of the highest quality stainless steel (316L), which can be cleaned with a bulit-in CIP system. Apart from its main elements, it is completely individually designed and controlled by PLC. TECHNICAL PARAMETERS: • only 3 persons per shift are required to operate the whole production process • production capacity: 500 - 1250 liters / hour • product  ...

Complete automatic PET bottling line with capacity of 10.000 b/h, with 2 sets of tools for bottling 0,5L and 1,5L. PET LINE -Tikves Winery- Spec. Equipment Producer Type Year of prod. Capacit. 1 Preforms transporters M. TANNER 1999 15.000p/h 2 BLOW MOULD KRONES- CONTIFORM KBM8 1999 10.000b/h 3 Chiller for moulds KKT-Kraus KLC-s 38 N 1999 38KWhr 4 Air transporter KRONES- 1999 5 Unscrambler LANFRANCHI L1ST 1997 12.000b/h 6 OZONER for rinsing water BERTOLASO OM1002 1997 7 Monoblok Rinser+Filler+ capper RINSER BERTOLASO NV 1R 10 1997 10.000b/h FILLER ORTMAN+HERBST HANSA B B56/8Z-144 1997 10.000b/h CAPPER ZALKIN PCO 1997 10.000b/h 8 Bottles transporters KETTNER 1997 9 MIKSER ORTMAN+HERBST 1978--- 2005-Refurb. 15.000l/h 10 LASER PRINTER ALMARK 880 11 Labeller KRONES CANMATIC- WRAP AROUND 2002 10.000b/h 12 PVC Packer BAUMER 1997 12.000b/h 13 ...

The BX series machine is a high-speed intermittent operation vertical filling sealing machine. Its maximum speed is 100 bags per minute. Servo driven end seal jaws operating and transporting the film PLC controller with touch screen interface for easy operation Hot printer and film feeding system work together synchronously One-piece bag former, quick change, no tools needed Exact warning function for product taken Photo sensor for automatic tracking of eye marks Stainless steel for excellent durability and hygiene

Sell 187 ml and 250 ml slim canning line A washer for empty cans A filler-seamer with Siemens touch screen control A liquid nitrogen doser with Siemens touch screen control A washer for full cans A dryer An industrial inkjet printer A sleever A thermal shrinkage tunnel with steam power plant A set of conveyors

Laetus ’ MV-70 offers a range of features to meet demanding requirements for secure marking of folding boxes in the packaging line. Up to two different print positions can be set up, permitting simultaneous printing of the front and the back sides of a folding box. Features include the following: • Secure pack handling system • One user-friendly operating panel to control all modules • Space savings due to slim dimensions • Extensible with modules • Simple maintenance due to GMP-compliant design • Format adaptation without tools The MV-70, combined with a Hapa redcube printer, a FlexLink conveyor belt option, and Laetus software S-TTS (Secure Track & Trace Solutions) ensures reliable serialization of folding boxes in packaging lines. The redcube printer’s DOD technology and the UV-hardened ink achieve high print quality, according to t ...

Mettler Viscometer complete case with all attachments. The Rheomat RM180: is a portable, easy to use viscometer, used primarily for quality control and product development. It can be used manually using simple push buttons on the keypad or using a personal computer and optional software. The Rheomat can use concentric cylinders, TV spindles and ISO 2555 measuring systems. It uses a rechargeable battery for portability or in the laboratory it has it’s own stand and power supply. The data is displayed on the Rheomats’ Liquid Crystal Display and can be downloaded to printer or personal computer. Displayed instruction is available in English, French, Spanish, German, Italian or Dutch. Typical applications for the Rheomat include cosmetics, food and coatings.

Bench top autoclave LABOKLAV25 V, 25 litres ; - INTERNAL LABOKLAV 25 PRINTER ; - Tank 265x465 ØxD mm, outer dim. WxHxD 440x540x660, mm ; - Weight appr. 65 kg ; - Power supply 230 V-50 Hz ; - 20 programmes, all customisable, standard programmes according to version; - All LABOKLAVs are equipped with an external steam generator according to the principle of a dry stone (the heating elements are not in the water, the consumption of the energy consumption is reduced and the service life is increased); - They are also all delivered with a water condensation system at the drain. (pipe protection).

weighing range max. 300 g, resolution e= 0,1 g, accuracy from +/- 200-640 mg, speed adjustable, weighing cell BF 8, belt direction left to right, belt width 120 mm, axial distance feeding/weighing/outlet belt 420/260/420 mm, pneumatic discharge, printer, new belts, drive 230V/50Hz

Horizontal fully automatic machine for 3-edge and 4-edge sealed pouches for filling and packaging powdery products in double pouch operation (with perforation): • Format range double bags (W x H) min. (2x50) x 260 mm, max. (2x80) x 260 mm • Output max. 100 double bags/min (depending on bag size) • Screw dosing SD 70/2 for double bags • Main dosing min. / max. 2.5 - 90 g per bag • Micro-dosing min. / max. 0.3 - 5 g • Max. Roll diam. 600 mm • Core diam. 76 mm • Max. Roll width 520 mm • Gluing table with splice detection • 2 pcs. Thermal transfer printer Allen Coding 5 line cliché, individually switchable • Longitudinal and cross seam hot sealing tool, head seam hot sealing tool • Sealing stations manually adjustable • Print mark control • Tear aid with a needle • Bag inflator • Bag opening control • Filling nozzle • Trickle protection by sheet shear  ...

- Compressed air: 6 bar - Transport speed: 3 - 30 m/min - Welded frame dimensions (LxW): 580 x 440 mm - Film core diameter: 76 mm - max. film rolls diameter: 300 mm - Max. product height: 180 mm - Film thickness: 7 to 60 mμ - Max. foil width: 550 mm - Cycle rate: 40 cycles/min. - Total power: 3.7 kW - Machine weight: 560 kg - Space requirements (W x D x H): 2.05 x 1.72 x 1.48 m - Condition: good Details Angle welding machine fully automatic, permanently heated welding knife, DELTA color touch screen, horizontal and vertical photocells, film material polyolefin fine shrink films, PVC, PLA and other bio-films, with labeler / barcode printer SATO M8485Se Accessories no other accessories, documentation

Intermittent motion cartoner for folding boxes. Machine incl. feeder for pre-folded leaflets, inkjet printer (year: 2005). Output: max. 75 cartons/min.

Suitable for measuring and presetting all types of cutting tools as well as for measuring grinding wheel packages. The Zoller image processing saturn set incl. Camera system allows a fast and operator-independent measurement of any tool cutting edge. Accessories: ZOLLER measuring machine control »Pilot 4.0« Panel PC with 24 multi-touch display., Industrial computer with Windows 10 64-bit operating system., SK 50 high-precision spindle, concentricity 0.002 mm, spindle brake, 4 x 90 ° spindle indexing,, Autofocus CNC drive in the C-axis for operator-independent cutting edge focusing and automatic, Measurement of multi-edged tools, Rotary encoder for high-precision position determination in the C-axis, Software pilot 4,, Monitor holder for ZOLLER measuring machine control, mouse and keyboard shelf., Under table system,, Maintenance unit,, Thermal label printer., Z-axis travel: 420 mm, Tr ...

NÜVE NC 40 M steam autoclave for sterilization of liquid media and solid materials used in laboratories. Autoclave unpacked but unused. External dimensions (W x D x H): 570 x 660 x 1200 mm Autoclave chamber dimensions (diameter x depth): 320 x 520 mm Capacity: 40 l Temperature range: 105-135 degrees Celsius Display: 4.3, color, LCD Programming: 2 defined programs for liquids and 3 for solid materials, possibility of adding 1 program for liquids and 1 program for solid materials Possibility to program a delayed start Power consumption: 2500 W Built-in USB port RS232 computer connection with the possibility of connecting a printer Saving the last 25 cycles in internal memory Warranty until 2026

Aseptic Production and Filling Line for Non-Carbonated Drinks 2500 bph This production line is designed for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. This line is used for green tea based drinks, flavoured with various fruit juices. Production equipment includes two tea brewing vessels, mixing tanks, UHT pasteurizer, product filter, water treatment plant with reverse osmosis, oxygen generator and product tank which are the part of the delivery. UHT pasteurizer is heated with thermal oil boiler. The filling line is semiautomatic (blow moulder operation, empty PET bottle feeding and palletizing is made manually). Current owner designed the line from individual machines and rebuilt aseptic filling block ...

Travel Z - axis (tool length) max. 500 mm Travel X - axis (tool diameter) max. 330 mm Tool holder (basic holder) SK 50 With calibrated adapter for tool holder SK 40 with calibration edge With label printer, incl. replacement labels POS-CAM II camera system The camera system was renewed in 2020 The tool presetter is in a very neat condition, checked, cleaned, ready for immediate use. Manuals and instruction manuals are available The camera system can also be used to inspect the tool cutting edges (last picture).

NEX QC - Energy Dispersive X-ray Fluorescence Spectrometer (EDXRF) Excitation • 50kV X-ray tube • Maximum power 4W • 6 filter positions with a shutter Detection system • High performance semiconductor detector • Thermo-electric cooling using the Peltier effect • Optimal balance between spectral resolution and the maximum number of pulses counted Sample chamber (possibilities) • Large internal dimension of the sample chamber: 190 x 165 x 60 mm • Single station for 32 mm diameter samples • Single station for 40 mm diameter samples • 6-position sample feeder with a diameter of 32 mm • 5-position sample feeder with a diameter of 40 mm • Single station for 32 mm diameter samples with sample rotation • Analysis in air or helium Environmental conditions • Temperature 10-35°C (50-95°F) • Relative humidity ≤ 85%, non-condensing • Vibratio ...

Toshiba B-EX4D2 Direct Thermal Label Printer -Printing technology: Direct thermal -Resolution: 203 dpi -Max. print speed: 305mm/sec -Max. print width: 104mm -Max. print length: 1,498mm -

Optima ImmuFill filling & closing machine for plastic bottles used for Test Kits in diagnostics with screw cap and labelling, bottle diameter max. 55 mm, bottle height max. 130 mm, screw cap diameter max. 28 mm, filling station for microdosing via a peristaltic pump (filling accuracy +/-5% at 0,5 ml.), torque controlled screw capper, Wipotec weighing cell for checking the weight of the filled bottles, label applicator with Domino V230i thermotransfer printer, capacity up to 1,500 bottles per hour with a filling volume of 10 ml., machine floor space approx. 2820 x 2500 mm (LxW), machine height approx. 2200 mm

COMPLETE BOTTLING LINE GLASS Speed: 18.000 bph Bottle formats: 0.25 LT | 0.5 LT | 0.75 LT | 1.0 LT Depalletizer Acmi Rasar D180 | 1991 Decrater Acmi Deinser 6 | 1993 Cap unscrewer Alcoa | 1996 Depalletizer Acmi Stratos | 1994 Bottle-Washer Simonazzi Atlantic | 1985 Bottle inspector Krones Linatronic | 1997 Saturator Premix Jaku | 1999 Rinser Sbr (Bertolaso) | 1991 Monoblock Eurostar 70.15 Isobaric | 1992 Capper Alcoa | 1996 Labeller Krones Prontomatic | 1991 Ink-Jet Videojet Cicrespi | 2009 Crate washer Bohrer | 1999 Case packer Acmi | 1996 Palletizer Acmi Rasar P 130 | 1991 Pallet wrapper Borbinder Peter Born Ag | 2005 Labeller Bancale Bornbinder Peter Born Ag | 2005 Case packer Dimac Starwrap R25 | 1986 (Circa) Ink-jet printer Tradex | 2014 Pasteurization plant | 1997 Air compressor Atlas Copco GA 45 | 1991 Air compressor Atlas Copco GA 37 | 2010

Used line for packing product into cups by FDPm type PAK 2LTF. New 2015. Power supply 3 x 400 V Power 6.5 kW Pressure 6-8 bar Weight 3400 kg Technical specifications: 1. the control of the machine is supervised from the control panel Mitsubishi controller. The machine operates in an automatic cycle. The controller has the following operating programmes: - automatic operation mode with control of the product level in the tank - presence of packages - cyclic operation mode - one cycle - dose regulation The control system switches off the dispensers in the following cases: - lack of pressure - opening of covers - lack of packaging The control system is also equipped with: - visual and acoustic signalling of the operating state 2. Control cabinet - IP 65, located inside the unit, equipped with ventilation and a heat sink. In addition, the electrical cabinet an ...

Year: 2018 - technically efficient - cutting length: 6000mm - discs: 550 mm - E580 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cut according to the external dimension, without correction - cooling installation - vertical pneumatic clamps - automatically lowered and raised shield shields - sawdust extraction - label printer

Xeikon 3300 Digital label printer in excellent condition 5 colours Digital label press CMYK + white Manufacturer: Xeikon Year of production: 2012 Web width: 330 mm Installed colours: 4+1 CYMK + white Equipment: 5 colours digital printing Unwinder Web guide and splice table Rewinder Machine is available immediately 

8 Colours Flexo printer 3 Screen printing unit (interchangeable) 1x Schober Perforation unit 1x Rotary die cutter A4 2x Rotary die cutters 1x Double Slitting unit 8 x IST UV Sensotec Registercontrol BST Webguide BST Bahnbeobachtung Teknek Web cleaning 2x Corona treater 1x turning bar 2x Double unwinder – Double rewinder 1x extra rewinder 15 coating cylinders Ca. 480 clichee cylinders Ca. 50 Magnetic cylinders 30 Anilox cylinders

HOLWEG RS 25 PAPER BAG PRODUCTION MACHINE Holweg RS 25 bag machine Year: 1991 Busch paraffin machine – 1991 Holweg IS 80 flexo printer – 4 colors – completely rebuilt in 2000 Holweg unwinder – 1991 Machine is available immediately

Measuring range Z-axis 500 mm Measuring range X-axis 400 mm Adapter SK50 Compressed air connection 4-6 bar Tool weight max. 31 kg Dimensions L-W-H 1300 x 700 x 1900 mm Weight 300 kg Manual focus (= no autofocus for Cris measurements) Last maintenance + review of Zoller 12.2020 Accessories: HSK 63 Adapter Printer

Used EFC Bottling Line For Beer 2014 The line was built by the EFC in 2014 Speed in BPH depends on the format With 0 33L we reach almost 2000 bph foam permitting It utilizes gravity filling with a possibility of slight depression The labeling machine is an Enos Base mounted on the same conveyor belt with an inkjet printer just overhauled we also have 2 kits for making conical bottles 9 taps with the possibility of using depression 26 and 29 mm crown capper 7 bottle format changes 2 kits for labeling 0 33 and 0 50 conical FRIZZ type bottles Electro pneumatic inlet valves and ball valve for the total emptying of the bell 9 nozzles with level adjustment Used Efc Bottling Line For Beer 2014 this line is in very excellent conditions and ready immediately for sale [...for more information send your inquiry to the seller.] refno: LC340

Used Complete Bottling Line Alfatek 2018 HPE HIGH PRESSURE ELECTRONIC MONOBLOCK FILLER CROWN CAPPER ALFATEK Mod 9 1 Machine suitable for bottling fermented beer in the autoclave The complete bottling line for wine and beer is supplied ready with connection points for air product discharge point and electrical connection Max production 900 1000 BPH with carbonated product e 0 33 cl bottles Maximum valves flow rate l h 1250 Maximum machine rotation speed 400 2000 Filler pitch diameter 600 mm Pitch capper diameter 410 mm Maximum bottle diameter 115 mm N B Production may vary according to the type of product to be bottled bottling pressure product temperature type of bottle etc Condition of the beer product a constant and adequate pressure b constant temperature 0 2 c rested product not overflowing The monoblock is composed of FILLER Series BHPE ELECTRONIC ISO BARICA HIGH PRESSURE 9 valves S ...

Used Eurostar Canning Line up to 3000 cph Technical Analysis The Used Eurostar Canning Line up to 3000 cph is an industrial grade bottling machinery that offers advanced performance and functionality for companies in the beverage industry Production Speed of the Used Eurostar canning line up to 3000 cph The Used Eurostar Canning Line is capable of operating at an impressive speed of 3000 bottles per hour BPH This high speed makes it ideal for large scale bottling operations Type of Containers Supported This machine is designed exclusively for can bottling making it highly specialized for this application Can Formats supported by the Used Eurostar canning line up to 3000 cph Versatility is a strong point of this bottling line as it can handle a wide range of can sizes including 0 20 L 0 25 L 0 33 L and 0 44 L cans plus 0 15 L slim sizes can also be added if necessary This flexibility allo ...