hp hewlett packard used for sale

Pallet Truck JUNGHEINRICH Ant HPT A20 Load Capacity 2,000 kg Year 2019, S/N n.b., Colour Blue

Pallet truck JUNGHEINRICH Ant HPT A20 load capacity 2,000 kg built in 2022, S/N 77142106/0022, colour blue

Pallet truck STILL HPT 25, load capacity 2,500 kg, S/N HLI0293573, year 2016, colour yellow

Trailer STEMA HP350, first reg. 01.07.85, 350 kg GVW, FIN 114089, box size outside 130x110 cm, vehicle documents available, deregistered 08.01.18, HU 07/15

Please note! Some lamps have been used. Auction-ID: A1-41278-782

Please note! Some lamps have been used. Auction-ID: A1-41278-784

Auction-ID: A1-48540-981

Complete PerkinElmer Series 200 HPLC (High Performance Liquid Chromatography) installation. Consisting of: (1x) PerkinElmer Series 200 LC Pump, type N2910100, (1x) PerkinElmer Series 200 Autosampler, type N2930100, (1x) PerkinElmer Series 200 Column Oven S200 Heat Only, (1x) Showa Denko RI-101 Refractive Index Detector, (1x) PerkinElmer Series 200 Vacuum Degasser, (1x) LC Controller / control module. Includes: Various hoses and connections, Desktop PC and printer. Auction-ID: A1-48358-1

Only two seasons The sale will take place in the existing condition. Interested parties are advised to: to inspect the item before placing a bid and to check the condition, completeness and suitability. All information is provided to the best of our knowledge, but without guarantee. There is no assurance of specific properties or functionality. Auction-ID: A1-48672-3

Equipped with vacuum lifter without vacuum pump. Total column height 313cm, total arm length 308cm. Already disassembled. Auction-ID: A1-48235-105

Working parameters: HPR130 plasma cutting source/system; 5 A/82 V to 130 A/132 V output; 100% duty cycle; I2 130 A; U2 150 V; no-load voltage U0 311 V Equipment included: power source box, ArcGlide THC control module, CNC I/O connectors, Plasma I/O, OP CON I/O, lifter and associated cables visible Compliance: CE marking; EN60974-1.10 standard indicated; IP21 rating Power supply: 3~ 50/60 Hz, U1 400 V, I1max 32 A, S1 22 kVA, cos φ 0.92 Year & Manufacturer: HYPERTHERM, engineered and assembled in the U.S.A.Remarks : No. 078542; serial no. 130XD-001849; used equipment with visible signs of use. Auction-ID: A1-48608-6

Häner Bulldozer HPH-R 140 Excavator class: 1 - 6 t Dimension A: 480 mm Dimension B: 750 mm Dimension C: 1400 mm Working pressure: 160 - 200 bar Oil flow: 30 - 50 l/min Rotation: 360° Auction-ID: A1-48797-720

Häner pulverizer HPX1500 Primary and secondary demolition For carrier equipment from 16-22 t 360° hydraulic rotation The hydraulic rotation enables high accuracy and flexibility in work Opening width: 735 mm Interchangeable tooth plates made of HB450 Interchangeable blades made of HB600 Overall height: 1235 mm Overall length without mount: 1830 mm Rear clamping force: 140 t Front clamping force: 60 t Weight without mount: 1350 kg Open/close operating pressure: 280-320 bar Oil flow rate open/close: 70-120 l/min Operating pressure rotation: 70 bar Oil flow rate rotation: 15-20 l/min Turning Hose Size: 3/8 inch Size of hoses close/open: 3/4 inch Auction-ID: A1-48797-415

Pallet Fork MS10 - Symlock 331kg Weight Prong length: 120cm Width of carrier plate: 1,100 mm Load capacity: 2,500 kg max. Auction-ID: A1-48797-1450

Häner pulverizer HPX4000 Primary and secondary demolition New For carrier equipment from 35-50 t 360° hydraulic rotation The hydraulic rotation enables high accuracy and flexibility in work Opening width: 1070 mm Interchangeable tooth plates made of HB450 Interchangeable blades made of HB600 Overall height: 1940 mm Overall length without mount: 2820 mm Rear clamping force: 240 t Front clamping force: 120 t Weight without pick-up: 4000 kg Open/close operating pressure: 300-340 bar Oil flow rate open/close: 180-230 l/min Operating pressure rotation: 70 bar Oil flow rate rotation: 20-25 l/min Turning Hose Size: 3/8 inch Hose Close/Open Size: 1 inch Auction-ID: A1-48797-430

Not being able to test working condition Auction-ID: A1-41959-122

Häner pulverizer HPX2600 without pick-up Primary and secondary demolition For carrier device from 24-35 t 360° hydraulic rotation the hydraulic rotation enables high accuracy and flexibility in work Opening width: 900 mm replaceable tooth plates made of HB450 interchangeable knives made of HB600 Overall height: 1617 mm Overall length without pick-up: 2360 mm Closing force rear: 200 t Clamping force front: 80 t Operating weight with pick-up: 2600 kg Open/close operating pressure: 300-340 bar Oil flow rate open/close: 150-200 l/min Operating pressure rotation: 70 bar Oil flow rate rotation: 20-25 l/min Hose rotation size: 3/8 inch Hose closing/opening size: 1 inch Auction-ID: A1-48797-420

Häner pulverizer HPX2000 without pick-up Primary and secondary demolition For carrier device from 18-26 t 360° hydraulic rotation the hydraulic rotation enables high accuracy and flexibility in work Opening width: 800 mm replaceable tooth plates made of HB450 interchangeable knives made of HB600 Overall height: 1370 mm Overall length without holder: 2050 mm Closing force rear: 160 t Clamping force front: 70 t Operating weight with holder: 2050 kg Operating pressure open/close: 280-320 bar Oil flow rate open/close: 120-180 l/min Operating pressure Rotation: 70 bar Oil flow rate Rotation: 18-25 l/min Size hose turn: 3/8 inch Size hoses close/open: 3/4 inch Auction-ID: A1-48797-417

Screw drive mounted compactor HPC1500RJ New device Weight class: 17 - 30 t Weight: 1200 KG Centrifugal force: 150 kn (15 ton) Vibration frequency: 2000 rpm Oil flow: 120-170 l/min Oil flow engine: 27 l/min Operating pressure imbalance: 150-300 bar Engine operating pressure: 45-80 bar Hose connections: 1/2 inch Base plate: 1350 x 900 x 30 mm Height: 1500 mm incl. holder Attention: A hammer line (pressureless return) is required. Scope of delivery: Operating instructions Spare parts list CE Declaration of Conformity Auction-ID: A1-48797-790

HPC300 Mounted Compactor (without rotor) New device Weight class: 1.5 - 3.5 t Weight: 115 KG (without pick-up) Centrifugal force: 30kn (3 ton) Vibration frequency: 2000 rpm Oil flow: 30-60 l/min Operating pressure: 100-130 bar Hose Connectors: Inch Base plate: 600x370x25mm Height: 670mm Attention: A hammer line (pressureless return) is required. Scope of delivery: Operating instructions Spare parts list CE Declaration of Conformity Auction-ID: A1-48797-805