hp 100 used for sale

Grinding disc flap disc 125x22mm, metal, grit 80, in packaging Auction-ID: A1-40418-275

round 8cm, 100 cm long, unused will be delivered as a package Auction-ID: A1-40418-454

Machou, SA beer keg 20 liter deposit (empty), Alhambra Reserva 1925 . normal value deposit €30 each Auction-ID: A1-40418-439

Lashing straps 5 tonnes 9 metres, short ERGO, CE. Unused in box Auction-ID: A1-40418-157

Unused BYHV-230SAC all-in-one battery energy storage (BESS) with EMS integration Specifications: Type: BYHV-230SAC Version: all-in-one battery energy storage system (BESS) Status: unused Connection: standard 3-phase 400V Power: 100 kW Capacity: 230.4 kWh Nominal battery specifications: 768V / 300Ah / 230.4 kWh Maximum charge and discharge current: 170A continuous Rated Frequency: 50Hz/60Hz Manufacturer's warranty: 5 years or 8000 cycles, whichever comes first Features: Battery module Inverter / PCS Battery Management System (BMS) Cooling Fire protection EMS integration via WiththeGrid Teleport Local EMS for on-site control Cloud link for energy trading Real-time monitoring and control BESS 24/7 monitoring service by WiththeGrid Particularities: Suitable for peak shaving, increasing connection capacity, emergency power supply, grid balancing and capacity  ...

Please note, the first 3 photos are standard photos -> the actual package can be seen in the last photo(s). 40/1000mm, 140/1250mm Auction-ID: A1-43752-37

1000kg length 100cm with shackle rope 12mm Auction-ID: A1-46501-410

200 x 100 3 pieces 1470 long 200 x 100 4 pieces 2100mm long With Atlas connectors on the front side Auction-ID: A1-46501-2622

Working width approximately 140cm; roll diameter approximately 14cm; width approx. 205cm Auction-ID: A1-40137-386

Please note, the photos are standard packages -> the actual package may vary slightly. Auction-ID: A1-43752-47

qty 100 pcs Auction-ID: A7-46448-56

Concerns lot Asbestos-free corrugated sheets without drill holes various sizes. approximately: 100m2 Auction-ID: A1-40137-368

Granite top size 1570x900 mm RENISHAW PH10M Measuring Head With accessories, measuring instruments and office furniture DISMANTLING AND LOADING COST: EURO XXXXXXXXXX Note: The functionality of the goods has not been verified. They are sold in their existing state, without warranty of operation. Auction-ID: A7-45789-27

Water pump with petrol engine, 100mm connections, capacity approx. 100M/hour. unused Auction-ID: A1-40418-506

Material stake trolley steel 3 pcs. each approx. 100x145 cm, without contents

Electric chain hoist, crane, overhead crane, assembly crane, manual trolley, trolley, trolley drive, crane drive, crane travel, trolley -Manufacturer: Abus, electric chain hoist with driven chassis -Chain hoist: Abus type GM3- Load capacity 1000 kg -Main stroke: 5 m/min -Fine stroke: 1.3 m/min -Chain length: 3.5 m -Electric chassis: Abus S11148 34/153 rpm -Beam width: max. 310 mm Dimensions: see photo and technical drawing -Electrical accessories: Connection cable (see photos) -Transport dimensions: 450/780/H400 mm -Weight: 56 kg

Chip extraction system SPÄNEX SMU 100 built in 2019, 10,000 m³/h, 3,000 Pa, 400 V 15.0 kW, dead weight approx. 930 kg, control Siemens Simatic HMI, stands on a gallery, with briquette press SHB 70R, briquette capacity approx. 60 - 90 kg/h, size briquette D 70 mm, L= 30-70 mm, purchased 08/2019 for ? 65,000 net, presumably. incl. installation costs

Allimex cable clamp Allin 10 boxes with 1000 pieces Total: 10000x bolt + 10000x knurled nut M8 Stainless steel Auction-ID: A1-46359-491

End clamp Allimex Allislide 1 box of 100 pieces Auction-ID: A1-46359-477

Roof hook Allimex Allislide 2 boxes with 50 pieces Auction-ID: A1-46359-452

Kverneland LD 100-200-19-HD Full reversible plough – 5 coulters – heavy-duty professional plough Powerful reversible plough for professional tillage Robust HD construction for heavy floors High area performance due to multi-coulter design Ideal for large farms Equipment: Full body with inserts Additional pre-peelers available Scheibensech Rear Tracking Wheel Hydraulic frame swivel cylinder Hydraulic Packer Arm Cat. III Lower Link Connection Technology: Model No.: LD 100-200-19-HD Multi-coulter plough (approx. 5 coulters recognisable) Hydraulic adjustment Stable frame for high loads Condition: Used Wear parts partly at wear limit Typical signs of wear (rust, abrasion) Auction-ID: A7-46606-1552

Lot of 101-132, 300-311, 1005, 1114-1122 Dimensions in cm; Dimensions per Cargo Scooter; All data, as well as all descriptions, can be found in the respective lots; This lot has not been tested for functionality. Parts may be damaged or missing. The seller does not assume any warranty for the condition and functionality of the lot; Auction-ID: A1-46599-1

Allimex Allislide Mid Clamp 1 box of 100 pieces Auction-ID: A1-46359-482

Mention : PLEASE NOTE ! Unchecked products .Unknown operation ! All itmes are sold as is . No complaints or claims will be accepted after purchase. The buyer is invited to view the lots before auction day ! Auction-ID: A7-46458-1044

Viewing by appointment Unused Auction-ID: A1-40377-80

The goods include different product categories. Unchecked: Functionality unknown (functional, incomplete, damaged, can be used as a spare parts dispenser). Come to the viewing day to get an accurate picture of the reason for the return. Auction-ID: A7-46615-11

Golf hook Allimex 1 box of 100 pieces Auction-ID: A1-46359-472

Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm WEMO manipulator NOT included. MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800 × 1900 × 2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-4665 ...

Unused; ATS; rated output 80kw/100kva; standby 88kw/110kva; P.F. 0.8; RPM 1500; 135 liter tank; 3 PHASE; altenator type 274C; ATS 160A; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; 4-Stroke; V In-line; Water Cool; Electric start; 6742 Auction-ID: A1-46415-91

Dim. 700x1200x30 mm with horizontal shelves Auction-ID: A1-46266-308

table adjustable 0-45°, including 4 sanding drums Auction-ID: A1-45502-67

Equipped with nr. 2 material trolleys, loading platform, new spare gasket for the door. Internal compartment volume: 1.5m³; internal measurements: 1000 x 1000 x h 1500mm; internal capacity: 400 Kg; Rated temperature: 250° C; maximum absorbed power: 29 Kw. Serial: 90256 Estimated weight: 1200 kg Approximate dimensions: 1800x1500xh2550 mm 1400x1200xh1000 mm Auction-ID: A7-46655-55

Clamping Force: 100 Ton Holding force: 110 Ton Maximum opening stroke: 380 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Distance between plates: 610 mm Plate size: 600×600 mm Distance between columns: 420×420 mm Maximum weight supported: 700 kg Extraction stroke: 100 mm MORETTO receiver-hopper NOT included. WITTMANN granulate dispenser NOT included. SESOTEC metal detector NOT included. Screw diameter: between 25 and 35 mm - not accurately detected. Warning: the information reported has been taken from the manual and may not correspond to actual performance. For further information, on-site inspection is suggested. Approximate body dimensions: 4800×1900×2600 mm. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-46657-699

Dim. 700x1200x30 mm with horizontal shelves Auction-ID: A1-46266-307

with Netmak ST 4 feeder. including pallet with accessories Auction-ID: A1-45502-86

PBM Charger for Forklifts. Estimated weight: 70 kg Approximate dimensions: 1200x800xh500 mm Auction-ID: A7-46655-57

Unused; ATS; rated output 80kw/100kva; standby 88kw/110kva; P.F. 0.8; RPM 1500; 135 liter tank; 3 PHASE; altenator type 274C; ATS 160A; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; 4-Stroke; V In-line; Water Cool; Electric start; 6742 Auction-ID: A1-46415-5

EDM machine. Serial: 203 Estimated weight: 2000 kg Approximate package dimensions: 2300x1900xh2100 and 1200x800xh2200 mm Auction-ID: A7-46655-165

Machine defective - reason unknown Auction-ID: A7-46022-2509

Machine defective - reason unknown Auction-ID: A7-46022-2511

Clamping System: SK40 30-position tool changer Minimum and maximum tool diameter: 76/125 mm Maximum tool length: 280 mm Maximum tool weight: 7 kg Including tool holders and related drills/cutters. With the possibility of converting clamping system to the desired type, subject to a quote from the product representative. Assorted quantities and types, as shown in the photo. The total availability of individual visible elements is not guaranteed. Auction-ID: A7-46538-10

Hand bending machine Height 100mm Weight 60 kg Dimensions 0.8 x 0.6 x 0.3 m Auction-ID: A7-46642-49

Lifting magnet, load capacity 1000Kg, see pictures. Condition: never used / new (5) Auction-ID: A7-46642-143

Angle vise Jaw width 110 mm Clamping range 100 mm Clamping height 60 mm Weight 11.5 kg Dimensions L x W x H 280x280x100 mm Condition: never used / new (5) Auction-ID: A7-46642-138

Manufacturer DMG Mori, article name KGT5020R1301127.6FF Auction-ID: A1-46666-547

Roller block with Load capacity 1000 kg Workpiece diameter 20 - 800 mm Drum diameter 200 x 50 mm Feed rate 80 - 1600 mm/min Total power requirement 0.23 kW Dimensions 600x500x500mm Condition: never used / new (5) Auction-ID: A7-46642-62

Kepco JQE 100-5 M Power Supply Power Supply Laboratory Power Supply Power Supply Auction-ID: A7-46327-95

Technical data Manufacturer: ARBURG Model: ALLROUNDER 1200 T 800 - 100 Serial Number: 209339 Year of manufacture: 01/2009 Operating voltage: 400 V / 3~ / 50 Hz Control voltage: 230 V / 50 Hz Control voltage (2): 24 V Rated current motor/heater: 60 / 11 A Total rated current: 71 A Total connection: 37 kW Country of manufacture: Germany Configuration Hydraulic injection moulding machine of the ALLROUNDER series Machine size: 1200 T Version: 800 - 100 Auction-ID: A1-46503-322

Model No.: CTMADC-100 Voltage: 220V AC, 50/60Hz Type: Foot Switch/Pedal Switch for Machine Control Material: Metal housing, robust Connection: Cable with industrial connector Condition: New, in original box Weight incl. packaging approx. 4kg Auction-ID: A1-46686-1055

Welding table / hole table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Sidewalls 165mm Height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. incl. floor storage Accessories optional Surface flatness 0.2 - 0.4mm to 1000mm. Very stable base, so the table with pallet truck. The accessories shown are optional Table length 2000 mm Table width 1000 mm Table height 850 - 900 mm Machine weight approx. 0.45 t Condition: never used / new (5) Auction-ID: A7-46642-88