hp 100 used for sale

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", subject to change, reserved for intermediate sale, below: 1 piece used gas nipring plant, make: Aichelin Useful: 1000 mm Useful length: 3000 mm 2 pieces of retort (one of which is only 4 years old and little used) 1 piece storage shaft 1 piece washing machine All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator informat ...

Cat.-Nr. 10-1735 in a very good condition with Mixer on the top With Manhole on the top 400 mm With Airlock DN 300 With CIP Cleaning System With Inlet DN 50 With thread Connector DN 50 With Level Indicator With Mixer on the side With Conical Bottom with Outlet DN 50 On 4 Adjustable Feet Measurements: Total Height: 4000 mm Body Height: 2450 mm Diameter with out Mixer: 2400 mm Diameter with Mixer: 2800 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 09-1049-3 in a very good condition standard equipment: material: V2A (AISI 304) 1.4301 with chill coat 600 mms wide with entrance 1 AG with manhole on top m.6 screws DN 50 and DN 25 with outlet DN 50 - exit 1 ? AG with conical subsoil resistant to pressure 1.5 cash DxH: 1050 x 1,950 mms of weight: 126 kg Surcharges: fermentation connector DN 50 fermentation lock sample valve CIP cleaning blind cap DN 50 temperature controll unit The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat No. 12-2800(132) New made of V2A - KUBISCH - pressureless Standard equipment with: • External dimensions: 1000 x 1000 mm • Height tank body: approx.1000 mm • Height tank with feet: approx.1480 mm • Material V2A AISI 304 - Material thickness: tank 1.5 mm / feet 2.5 mm / transport eyelets 2.5 mm • Weight: 130 kg • Capacity: 1000 litres • Top manhole 400 mm - lid with 4 screws and clamping bracket with screw and fermentation spandy NW 50 • Underbody deep drawn • with residual outlet DN 65 • Corner reinforcement 150 mm/150 mm from bottom to top tank • Surface: marbled outside - inside 3D • stackable - transportable with hand-held trucks • In the filled state of: 1 + 1 • In the empty state of: 1 + 3 Supplement/piece (prices on request): Disc valve DN 65 Disc valve DN 50 Blind cap Reduction piece NW 65/40 or 65/ ...

Cat. No. 09-1590-3 new standard equipment: With rest outlet with sloping seat discs valve DN 50 With cylindrical conical ground below and on top Test pressure: 1.5 cash – admitted working pressure: 0.49 bar Material V2A AISI 304 - surface inside and outside IIIC With manhole DN 400 m. 6 screws thread connection carbines DN 25 and with sloping seat discs valve DN 25 diameter: 1,000 mm contents: 1,000 mm height: 1,720 mm weight: 102 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

We can provide them with suitable Glass Bestcut for Busser MKH Finecut and for Stephan Micro-cut machines Supplying suitable sheath heads and cutting rings Furthermore, it is also Karl Schnell Finest Shredder Type FD 175 and FD 225 with 3 step cutting system in these the last stage as rotor / stator system is installed. Just like repair / refurbishment / and sharpening as well as regrinding of the cutting heads

Cat.-Nr. 11-1045 Capacity: 500 up to 1000 Litres COMPLETE For producing juice and filling in from fruits and vegetables For Washing/Grinding, Pressing, Storing, Pasteurizing, Filling Complete Production Line with following machines: Cat-Nr 10-2346 - Eurolux Big-Box Dumper for emptying fruits and vegetables from wood or OVC boxes LxWxH: 1680 x 1480 x 1220 mm Cat-Nr 10-2347 – Eurolux Wash and Grinding Mill Unit Capacity: 2000 kg/h - Motor Power: 3,0 kW Cat-Nr 10-2337 – Eurolux Automatic Continuous Belt Press EL-500 for producing fruit juice and fruit wine, cider from apples, pears Capacity: 500 up to 1000 kg/h Cat-Nr 06-1101 – Eurolux Floating Lid Tanks 2 x 1000 Litres Floating Lid Tanks 2 x 500 Litres Floating Lid Tanks 2 x 300 Litres Floating Lid Tanks Cat-Nr 10-2350 – Eurolux Pasteurizing Machine EL-1500 with Plate Heat Exchanger Capacity: 10 ...

Cat. No. 06-1101-6 new with Floating Cover - round vertical on Feet Cat-Nr.06-1101-6 available : 5 Standard Features: • Manufacturer: Eurolux GmbH • Material: 1.4301 acc.DIN 17440 AISI 304, inside 3IIId = 2B – outside marbled • Surface fully pickled, passivated and neutralised • All welds are treated and not porous to prevent the occurance of unwanted bacteria. • Firm Legs that ensure stability of the whole vessel • Drain Port DN 50 • Level Indicator • Floating Lid with Accessories • Xiring-escape Valve • Air Pump • Transport Hooks for Lid on/off Volume: 1000 litres Diameter: 920 mm Height Cyl: 1500 mm Total Height: 1910 mm Feet Quantity: 3 Surcharges/unit: (Prices upon request) Butterfly Valve DN 50 Clap Lid Crane Support for Ladder Connecting Pipe for Clap Size 37 with Butterfly Valve DN 40=Clea ...

Cat-Nr. 12-2765 in a very good condition With Cooling Jacket Surface: Outside and Inside: 2B=IIIC Upper Bottom: With Manhole Lid round 400 mm with Clamp With Inlet Connector DN 25 Tank Body: Mit Threaded Connection for Cooling Jacket DN 23 Lower Bottom: With Flat Conical Bottom with Central Outlet With Outlet Discharge DN 65 reduced to DN 50 Butterfly Valve With Threaded Connection with Outlet on Cooling Jacket DN 15 Measurements and Weight: Height x Diameter: 1560 x 1220 mm Height Tank Body: 960 mm Weight: 270 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 08-1210 made of V4A - round standing - Condition: good Content: approx. 25,000 litres 1 tank unit consisting of 4 chambers Dimensions: Width: 460 cm Depth: 580 cm Height: 435 cm For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Cat-Nr. 10-2460 in a very good condition Material: V2A - AISI 304, 1.4301 Surface: inside: IIID, outside marbled Upper Body: with Manhole Lid DN 400 with 4 Screws with Clamp Closure, with Fermentation Lock DN 50, with 4 Eye Hooks Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Height: 1570 mm Outer Dimensions: 800 x 1200 mm Weight: 130 kg The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat.-Nr. 11-3330 in a very good condition for Cosmetic and food stuff Max.Pressure 3 bar Double Jacket : 6 bar with agitator adjustable speed 160°C temperature resistant Manhole and sight glass with lighting CIP cleaning injection nozzles aso For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Approx. 30 lfm shelf shepherd, type R 3000 Over 300 meters present as good as new, 50 cm depth present Negotiation price: € 2,330.00 net Offer consists of: Approx. 30 lfm shelf, 2.3 m high, 50 cm deep, 100 kg load/compartment. Field width approx.100 cm 31 pcs stand or frame, 2.3 m , galvanized 150 pcs. shelves, 100kg load/compartment, galvanized 7 St. Cross Associations for Stiffening. 5 levels per field (several are of course possible at an extra cost) Other compilations possible. Heights 2.3m, 2.5m or 3m available. Shipping/transport costs on request Visit possible at any time by appointment. (changes and errors in the technical data, information prices and intermediate sale reserved! See our Terms and Conditions, all prices excl. VAT from stock) Purchase / Sale We are looking for, or offer numerous items from various areas on an ong ...

Kat. No. 12-2170 in very good condition with anchor agitated mixer insulated DxH: 2650 x 4,300 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-2135 in a very good condition Bi-Aseptic with Mixer on the side DxH: 2100 x 5200 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

We offer metal trays, which are used as subjects in heavy duty and pallet racks. technical data: Width: 890mm Depth: 1120mm Number of sticks: 3 units Capacity: At box 500kg, when setting up a pallet of 1000 kg Weight: 6, 8kg / PCs. Net price â?¬13.00 per piece Product available now We have also other Rack Accessories, as well as other racks on sale. Do you need something? Like to take contact with us. On request, we can organise transport. After entering the zip code, we will charge you the delivery cost. To the purchase price, transport costs must be considered. Offer is valid until stocks last. Before you click buy, you record please contact with us, to confirm the availability of the product.

Treif Felix CE-100, Dicer, capacity 0, 8 t / h, 1, 0kw, very good condition. The machine is immediatley available and can be inspected in our facility in Koblenz, Germany.

Eurolux Beer Tanks / Fermentation Tanks in AISI 304 test pressure: 1,5 bar, operating pressure: 0,99 bar with Cooling Jacket with Isolation - Capacity: 1000 Litres NEW Material: V2A (AISI 304) 1.4301 Upper bottom: with Manhole with 6 Screws incl. thread connection DN 50 according to DIN 11851 with over- and underpressure valve Tank Body: with Cooling Jacket 600 mm wide with inlet 1” external thread with Isolation Lower bottom: With Conical Bottom and rest outlet underneath with a forklift and pallet truck Measurements and weight: WxH: 1150 x 1950 mm Zyl. height: 850 mm weight: 170 kg Surcharges/unit (price upon request): Fermentation Connector DN 50 Fermentation Lock Butterfly valve DN 40, DN 50 Sample Valve CIP Cleaning System Blind Cap DN 50 Immersion socket for temperature control Temperatur ...

Stainless steel pipe screw with 250 mm diameter and 2,100 mm conveyor length (measured from mid inlet to middle outlet), inlet and outlet 270 mm each, with drive via intermediate gearbox and claw coupling.

Electro-mechanical scale for liquids, with Hottinger load cell, pressure control valve, pneumatic outlet valve and solenoid valve. In support frame with feet.

New magnetic tape, E-or hydraulic drive, if you have questions 0049016044 44300

Used storage container made of steel according to DIN 6616/2 in double-walled design (with test certificate), for above-ground storage, with fifth feet, 1 dome with PE blind lid, seal, screws and nuts (stainless steel). Container is expertly cleaned by us and equipped with an inner shell suitable for the storage of liquid fertilizer. Content: 100,000 litres Diameter: approx. 2,900 mm Length: approx. 15,750 mm Weight: approx. 18,800 kg On request, we can provide the container with a new exterior paint finish and equip it with a ladder with operating platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective box for holding the LWG • Basic fittings Liquid fertilizer consisting of filling, removal, venting and bearing pipe • Liquid fertilizer pump made of polyester 2" • Installation of the liquid fertilize ...

Rotary vane vacuum pump Manufacturer: Busch Type: RA 0100F Status: Preliminary Performance: 12 months Delivery time: by arrangement; ready for use

Unused gearboxes, angular gearboxes, partly without electric motors, partly with electric motors. Manufacturers e.g. PWH Plants + Systems GmbH These types and others pre-raetig: 1. PWH 90KW Type K2SZG250 n1=1500 rpm n2= 75 rpm i=20 P=90 KW Length over everything: 120cm Width over all approx. 55cm Height approx. 56cm Diameter of shaft rear (lies laengs) 45mm Transducer of the shaft front (lies transverse) outside 160mm Transducer of the shaft front (lies transversely) inside 140mm Weight-cooked 1,000kg 2. PWH 45KW Type KSZG200 n1=1470 rpm n2= 73.5 rpm i=20 P=45 KW All over: 94cm Pq7hwm Width over all approx. 45cm Height approx. 46cm Diameter of shaft rear (lies laengs) 50mm Transducer of the shaft front (lies transverse) outside 150mm Transducer of the shaft front (lies transverse) inside 120mm, passage 100mm Weight-cooked 600kg 3. PWH 37KW Type KSZG180 ...

New oil tank 100,000 liters for sale. Above-ground heating oil tank system 100,000 litres, D=2,900 mm Above-ground tank systems from Dehoust according to EN12285-2 (CE), class B, tank type D, for heating oil. Cyl. Storage tank made of steel, double-walled, with filled control liquid Glymin NF (approval no. BAM 1.4/12481-5.1/6035). Standard with a Dom DN 600 with dome cover, gasket and screws. Container inside raw, outside all parts sandblasted and with simple primer. Incl. synthetic resin paint on the outside in RAL colour. Complete tank system equipped with: - welded-on saddle feet - optical leak detector type LAS, approval no. Z-65.24-381 including Test and control liquid for refilling. (up to Ø2000mm pre-assembled) - Tank fitting for heating oil (pre-assembled up to Ø2000mm), consisting of: Filling tube 2" with TW closure Suction combinatio ...

Wash wa whisk WA LC40 with raetzmuehle RM40 for packing press 100P2 rotary bend nominal power up to 2000 kg/h engine power 6.2 (8.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2000 mm width 70 0 mm Hoe he 2200 mm He Assumption 800 mm Weight 285 kg Material 1.4301 / AISI 304 Connection for cleaning 1/2 inner connection for washing 2 outside He he mash release 1260 mm Maximum fruit release 800 mm Scope 12mm cutting sieve ; New machine - best condition

Ladies and gentlemen, we have various transformers for sale services of 630KVA to 3500kva Voltage 10KV 15Kv 20KV 22kv, 30kv 33KV immediately available and nationwide available TEL. 01727265324

Rotary vane vacuum pumps lubricated Manufacturer: Busch Type: RA 0100F Status: Demo Warranty: 12 months Delivery time: Please enquire; ready for operation

500L EMULSIFYING MACHINE 1. Capacity: 500KG/batch 2. Agitator: 5HP x 415V x 50Hz x 4P. TECO induction motor. Output speed 0 to 110 RPM. 3. Tank: Full capacity 640L, Mixing capacity 150 to 500L, SUS 304 heater 6kx4 unit. Max product heating temp 950C 4. Lobe pump: 2HP x 415V x 50Hz x 4P speed 1500L/Hr 2 bar. 1000L EMULSIFYING MACHINE 1. Capacity: 1,000KG/batch 2. Agitator: 7.5HP x 415V x 50Hz x 4P. TECO induction motor. Output speed 0 to 120 RPM. 3. Tank: Full capacity 1300L, Mixing capacity 300 to 1,000L, 4. Lobe pump: 2HP x 415V x 50Hz x 4P speed3000L/Hr 2 bar. 5. Material machine: Contact Part (inside tank) SUS 316, others SUS 304 6. Thickness: ≥3mm

Doka 3-ply sheets provide the basis for many Doka formwork systems and have a wide range of uses. Doka has the right solution for all requirement, covering anything from standard applications to rentable panels. Multiple use and prevention of positive imprints through closed surface on both sides coated with high-quality melamine resin. Lower costs for finishing work based on high dimensional and angle accuracy. Type: 3-ply formwork sheet made of spruce, crosswise glue-bonded, with edge strip Surface: urea-melamine resin adhesive high degree of format accuracy

Steel tank, used approx. 100 m³ / 100,000 litres underground tank, water tank, firefighting water tank, water cistern. In good condition, underground storage tank for horizontal placement. capacity: approx. 100 m³ / 100,000 litres material: steel tank dimensions: approx. Ø 2.9 m x 15.8 m long weight: approx. 17.0 t other: exterior with bituminous insulation or bitumen painting The tank is used and has been emptied and professionally cleaned inside. According to the age traces of use are present. It is in good condition, yet slight insulation damage caused by transport may be present on the outside. This steel tank / container can be used as a storage tank for many different media. Also we can modify the tank to suit your demands, e.g. as a fire-fighting water tank, just ask us. Price upon request. Transport can be arranged at low cost. It is not possib ...

Mixing vessel Total volume: 100 l speed-controlled agitator Speed 335-1920 rpm Engine 3000 rpm Lid outlet on the ground very high quality Dimensions LWH: 500 x 500 x 1800 mm Weight: approx. 150 kg

Sell Steel pipes DN 1200 wall thickness 20 mm, outer PE sheathed and coated inside and elbows DN 1200 Steel pipes DN 1000 wall thickness 14.8 and 16.8 mm, outer PE coated and internal coated Elbows DN 1000 from 10 to 45°

The AutoDoor AD100 is a powerful, electrically operated door opener for CNC machines with a stroke of 1000 mm. The system offers an integrated safety function in accordance with EN ISO 13849-1 PL d and does not require external light barriers or safety edges. Thanks to the standard mounting brackets and Harting connectors, the AD100 can be quickly installed and seamlessly integrated into any CNC machine. Standard features: - Available in 3 different lengths as standard. - Standard brackets for quick and easy installation. - Available with machine-adapted brackets for different machines. - Standard for 180 kg door weight, stronger options available. - Single or double door function. - Can handle different stroke lengths in double-door operation (option). - Fits all CNC machines on the market. - No light barriers or terminal strips are required; the safety function is integrat ...

USED GLATT STAINLESS STEEL 1000 LITRES BICONICAL MIXER REF.: C6525 Bicone mixer made of stainless steel manufactured by GLATT with a total capacity of 1000 liters. General characteristics: Manufactured by GLATT Type Biconical mixers Material Stainless steel Year built 1998 Weight 1030 kg Transport dimensions: Total height: 2200 mm Total length: 2430 mm Total width 1500 mm Bicone dimensions: Body diameter: 1300 mm Body height: 350 mm

Adjustable crossbeam, crane crossbeam, crossbeam for pillar jib crane, indoor crane, workplace crane, chain hoist, crane hook crossbeam, load crossbeam -Manufacturer: Seil Becker, crane traverse -Load capacity: 100 kg -Steel rope: Ø 4 mm -Dimensions: 1015/80 / H440 mm -Net weight: 9.2 kg

Engine A1050024 Motor for BOFA suction systems: Type: AD 500 IQ, AD 1000 IQ , AD 1500 IQ Engine A1050024 MA-201067 New original engine

Electric chain hoist, chain hoist electric, with roller chassis used Manufacturer: LIFTKET Type: 071/53 Year of construction: 2008 Payload: 1000 kg two-strand lifting height approx. 5 m, single strand 10 m Lifting speed: 5.0 / 1.25 m/min with roller chassis Net weight approx. 60 kg Dimensions approx. 510 x 270 x 600 mm The chain hoist was only used for possible repairs in a mixing plant. So little has been used. All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.

Available in stock 1 x Used Rehobot Hydraulics 1000 bar Two stage Hand Pump Type PHS-374.36. The equipment is used but in good working conditions.

Heavy-duty casters, heavy-duty wheel, tires -Roll size: Ø 200 x 50 mm -Inner diameter: 20 mm x 64 mm -Price: per piece -Quantity: 2 wheels available -Weight: 4.5 kg/piece

used crane hooks for sale 20 - 80 -100 tons

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 50 to 100 mm -Load capacity: 6000 kg -Quantity: 1 piece available -Price: per piece -Weight: 29 kg/piece

Gear motor, electric motor, electric gear motor -Power: 0.37 kW -Diameter shaft: 22 mm -Speed shaft: 100 rpm -Construction: B5 -Protection class: IP 54 -Number: 1x engine available -Price: per piece -Dimensions: 370/140/H200 mm -Weight: 12 kg

Gear motor, electric motor -Speed: 100 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 44 -Brake: 220 V -Number: 1x available -Price: per piece -Dimensions: 520/150/H210 mm -Weight: 20 kg

Gear motor, electric motor -Speed: 100 rpm -Power: 0.11 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Number: 2x gear motors available -Price: per piece -Dimensions: 335/170/H160 mm -Weight: 9.2 kg

Gear motor, electric motor, electric gear motor -Speed: 23/100 rpm -Power: 0.15/0.6 kW -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: 560/230/H200 mm -Weight: 30 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Hollow shaft: Ø 14 mm -Construction: B5 -Number: 1 motors available -Price: per piece -Dimensions: 370/190/H215 mm -Weight: 15 kg

adjustable gear motor, variable speed gear motor, electric motor -Engine power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Shaft diameter: Ø 14 mm -Design: B5 -Number: 2 motors available -Price: per piece -Dimensions: 410/187/H200 mm -Weight: 20 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range: 190-1000 rpm -Motor: adjustable -Shaft: Ø 14 mm -Design: B5 -Number: 4 motors available -Price: per piece -Dimensions: 460/200/H200 mm -Weight: 22 kg