hp 100 used for sale

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -DSG type: 167/100/600 -Piston: Ø 100 mm -Piston rod: Ø 32 mm -Stroke: 600 mm -Number: 1x cylinders available -Price: per piece -Dimensions: 115/115/885 mm -Weight: 12.45 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 40 mm -Piston rod: Ø 25 mm -Stroke: 100 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 355/80/H50 mm -Weight: 3 kg

Drill stand, drill stop, drill press stand, drill jig, drill bushing jig -Quick release device -Max. Height: 100mm -Dimensions: 400/240/H220 mm -Weight: 22 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Span width: 0 to 100 mm -Load capacity: 1250 kg -Number: 4x sheet metal clamps available -Price: per piece -Dimensions: 300/310/H80 mm -Weight: 13 kg

Bench Grinder - Diamond grinding wheel MAPE BDS.100 Machine for sharpening cutting tools Rotation: 3000 RPM Integrated lubricant pump Equipped with: 2 diamond grinding wheels Ø 110 mm + 1 spare wheel (see abacus) Voltage: 380 V Length: 1000 mm Depth: 700 mm Total height: 1400 mm Weight: approx 200 kg

width of the strips: 100 mm band length: 915 mm dimensions of grinding wheel: 100 x 915 mm work table:: 225 x 155 mm total power requirement: 0,44 kW weight of the machine ca.: 0,018 t dimensions of the machine ca.: 0,56 x 0,26 x 0,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nominal force 100 t Stroke - 250 mm motor 3 kW more info on request

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 100 mm -Piston rod: Ø 45 mm -Stroke: 100 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: 480/145/H130 mm -Weight: 19 kg

Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube -for: scribing plate, clamping plate, straightening bench ... -Number: 1 prism available -Dimensions: 100/120/H60 mm -Weight: 5 kg

table diameter: 350 mm table load: 100 / 50 Kg swivelling range: 0 - 90 manuell Grad turning speeds: 0,5 - 5,0 U/min spindle bore: 30 mm Torque: 75 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with - Footswitch - tilt over winch - Speed continuously adjustable - 500 amps welding current transmission The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine vise, sturdy vise, drill vise -Span width: 100 mm -Jaw width: 135 mm -Back height: 40 mm -Dimensions: 400/310/H130 mm -Weight: 34 kg

Lamellar aprons, samurai aprons, machine protection, protective cover, bellows, protective cover system, protection system, guide protection, -Cover comes: from a WMW boring mill -for guide inside dimensions: 100 x 725 mm -Extractable: mm -Dimensions: 950/820/H150 mm -Weight: 30 kg

Lens, lenses -Number: 6x lenses -packed: individually -Dimensions: 110/110/H35 mm -Price: complete for all 6 pieces -is only sold complete -Weight: 0.3 kg/piece

Equipment: 1 sledge feeder on the right 3 press modules á 180 kN = 540 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 10 mm Belt width: up to 100 mm Feed length: up to 250 mm Power: up to 132 rpm

Multiple limit switches, buttons, limit switches -Type: BNS519-B5D16-100-1 -Price: per piece -Number: 2x available -Dimensions: 170/120/H107 mm -Weight: 2.9 kg

Specifications: - Load capacity 100 kg - Face disc diameter 400 mm - Faceplate infinitely tiltable - Table height with horizontal position approx. 470 mm - Rotational movement electr. infinitely variable 0 - 2.5 m/min - Welding current transmission 400 A - Drive 400 V - Right - Left rotation - Foot switch with foot roller controller for speed regulation - Ground cable - Space requirement approx. W 700 x H 700 x D 600 mm - Weight approx. 100 kg

thickness of jaw: 100 mm total power requirement: - weight of the machine ca.: - daylight opening: 90/105 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Micrometer, micrometer screw, measurement of tooth width, plate measuring surfaces -Measuring range: 100-125 mm -One revolution of the drum corresponds to: 0.5 mm -without locking device -large measuring areas -Measuring force: ratchet -Including case Setting mass -also other sizes available -Weight: 1.0 kg

Depth gauge, dial gauge, depth gauge, depth caliper, caliper, vernier caliper -Measuring range: 0-100 mm -Fine-tuning -long measuring jaws -Transport box -Dimensions: 365/180/H40 mm -Weight: 1.15 kg

Consisting of : - 3 tanks of 18000 litres - 3 tanks of 15300 litres - With walkways - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manhole DN 400 (cylindrical part) - Total emptying: ball valve Ø 40 Friedrich no 2 - Partial drain: ball valve Ø 40 Friedrich no 2 - Taster - Recirculation with ball valve Ø 40 Friedrich no 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, with a cylinder-grid fixed inside (to keep the mash cake wet) Dimensions : - 3 tanks 18000 litres: Ø 2000 mm, height 5600 mm - 3 tanks 15300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

A fully equipped line for the production of polypropylene yarn type Technorope 1000/100/PP-300: Manufacturer: Sima Srl Useful width of the cutting head: 1000 mm Capacity: up to 300 kg/h, depending on the type of yarn Twister: 16 (with 16 batteries) Yarn types: from 5000 to 120 000 denies

Vat boilers for spiral kneader Kemper ST 100 A -Kneading kettle with wagon and handle -for spiral kneader Kemper ST 100 A -Boilers are made of stainless steel -Boilers are for max. 100kg flour or 160kg dough

-extendable spiral kneader Kemper ST 100 A -with 2 automatic timers -with flour dust cover -Boiler right left rotation -Stainless steel spiral and guide rod -with 2 stainless steel boilers -per boiler for max. 100kg flour or for max. 160kg dough -Boiler manual locking

Polygraph kama folding glue machine with 3 points format 104

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 100 mm -Piston diameter: 40 mm -Piston rod: 14 mm -Connection piston rod: M12x1.75 -End position cushioning: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 45/H310 mm -Weight: 1.2 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 100 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Total length: 300 mm -Total length extended: 400 mm -Price: per piece -Number: 1x available -Dimensions: 95/95/H300 mm -Weight: 3.6 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DC-100-0140PPV -Piston: Ø 100 mm -Stroke: 140 mm -Pressure: max. 12 bar -Pneumatic damping: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 138/H395 mm -Weight: 8.5 kg

Offer up to 2 plasma power supplies here. Technical data, as shown in the picture.

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 100 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm -Total length: 290 mm -Total length extended: 390 mm -Dimensions: 48/48/H290 mm -Weight: 0.9 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp, -Stroke: 100 mm -Piston: Ø 50 mm -Piston rod: Ø 18 mm -Total length: 340 mm -Total length extended: 440 mm -Dimensions: 66/66/H340 mm -Weight: 2.1 kg

Oven, wood chip stove, biomass stove, boiler used Manufacturer: MAXXTEC Type: IT-A-550-100-V Year of construction 2001 550 kW 350°C 540 l Diameter approx. 1700 mm Dimensions: approx. 3000 x 1700 x 4500 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 100 mm -Piston diameter: approx. 100 mm -Piston rod: Ø 25 mm -Total length: 355 mm -Total length extended: 455 mm -Number: 1x available -Price: per piece -Dimensions: 117/117/H355 mm -Weight: 4.25 kg

automatic case erector + case sealer T-100 BDE, case sealer T-10 year 1999, pallet loader PD-120, Thermal ink jet system Diagraph IJ 3000 ES autmatic erecting station + carton seamer T-100 BDE, carton sealer T-10 year of construction 1999, Layer palletizer PD-120, Thermal ink jet system Diagraph IJ 3000 ES

Available in stock 1 x Used Capstone ECM Board. Most commonly used for Microturbines C60. The board is complete with all parts. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 2 x Capstone Dump Valve. Complete with flexible tube. Most commonly used for Microturbines C30. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request. Voltage: 12 VDC Amps: Unit 1 - 0.135 Amps / Unit 2 - 0.750 Amps Power: 9 W Pressure: Unit 1 - 200 PSI Air/Gas / Unit 2 - 140 PSI Air/Gas

Available in stock 9 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C60. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 1 x Used Capstone TET. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 3 x Used Capstone Digital Power Controller (DPC Board). 1 unit is complete and the other 2 are missing the control board. The units are used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

We offer you an agitator (waste water technology) from the company Højmark. - Model RVPG S 100 - Power: 4 KW - Wings are made of stainless steel - Speed 1500 min/-1 - Slow running The prices include VAT (VAT can be demonstrated) and are non-binding If you have any further questions, please feel free to contact us or visit us Errors and information Errors excepted! No guarantee or warranty. Prior sale and errors excepted. GTC Trade & Service Inh. M. Schönau Halbmondsweg 3 99885 Ohrdruf, Germany

Heating oil tank - tank system - steel tank - diesel storage brand new - 100m³ capacity - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII), 1 ladder and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage fluid. The container is completely repainted - RAL 7011 iron grey. (Other RAL colours are also possible on request!) L = approx. 15.80 m - D = 2.90 m - weight approx. 19.0 to. - ex works, freely charged - (For transport reasons, dome covers an ...

Gear motor, electric motor -Speed: 3.55 rpm -Power: 0.25 kW -Construction: B5 -Diameter shaft: Ø 40 mm -Protection class: IP 54/55 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 600/250/H280 mm -Weight: 43 kg

Technical data for the pallet rack traverse: Shelving system: Elektrolux The scope of delivery includes: 01x pallet rack traverse, used Material color: orange Box profile: 100 x 50 mm clear width: 1,900 mm Design: Head traverse

Milling machine MACMOM M 100, year of construction 1970. Without table. At call.

Three-phase motor, electric motor -Power: 3 kW -Speed: 1420 rpm -Shaft: Ø 28 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 390/250/H280 mm -Weight: 37 kg

Technical data for the pallet rack traverse: Shelving system: Elektrolux The scope of delivery includes: 01x pallet rack traverse, used Material colour: silver grey Box profile: 100 x 45 mm clear width: 1,900 mm Design: Head traverse

end mill, end mill, milling cutter -Condition: Like new -Diameter: 50 mm -Working height: 100 mm -carbide-tipped -Recording: SK50

Heidelberg Stitchmaster ST 100 Year of construction.: 2004 6 Investors 1x Turnaround feeder Trimmers with central groove Stacker

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 100 i Supply voltage 3 x 400 volts Adjustment range 30 – 100 amperes Duty cycle 50 % ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable separation cut 50 mm quality cut 35 mm Cooling inverter by built-in fan Cooling burner compressed air cooled Portable assembly system version Fuse 32 Ampere Dimensions L x W x H 560 x 265 x 400 mm Weight with burner 24 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 105 RTX, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece instruction manual Warranty 24 months from date of delivery List price directly ex works 3.020,00 € + VAT Price kpl. with above accessories 2.5 ...

DALEX 50Hz AC welding transformer 100kVA Rated Power: 100kVA/50%ED Voltage Prim.: 380V50Hz Voltage sec.: 8.2V Weight: 165kg

Stock No. 2587 1 used pelletizing plant, functionally tested, Throughput up to approx. 600 kg/h depending on the material, consisting of: 1 volumetric dosage Extruder Plastmachines Type PME 100 Single screw Ø 100 mm – 35 L/D Drive 134 kW – DC 1x degassing zone Melt filter BKG type K-SWE 121 RS – backwasher incl. Hydraulics 3 kW Strand head with holes 20 x Ø 3.5 mm Continuous cooling pool 400 x 4000 mm with strand guide rollers Strand extraction Strand pelletizer SG 300 ResoTec control / control cabinet Viewing by arrangement - at short notice More pelletizing lines / extruders available from our Wuppertal plant & ready for demonstration