hp 100 used for sale

Steam Boiler CHP Power Plant with 240 MW Pyroflow CFB Boiler A combined heat and power (CHP) plant in very good condition, with an electrical capacity of 88 MVA and a thermal capacity of 240 MW. The plant is designed to operate primarily on wood-based biomass, with coal as a backup fuel. This is a complete power plant, still in full operation, and includes all technical systems from fuel feeding to the dispatch of electricity and live steam. The equipment has been exceptionally well maintained and extensively upgraded throughout its lifetime, meeting the most stringent modern quality standards. The steam boiler utilises Circulating Fluidised Bed (CFB) technology with the commercial-type PYROFLOW, manufactured in Finland by Ahlström in 1989. This CFB boiler delivers a steam flow of 100 kg/second at a pressure of 137 bar and a temperature of 535ºC. The primary fuel has been wood-ba ...

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible.

Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P175 Profile dimensions: 100 x 75 x 2.50 mm Incl. cross and diagonal struts, and footplates The stands are pre-assembled (screwed truss) Height: 7,100 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Net price: 16.800,- € Gross price: €19,992 - - - - - Iveco Emergency Power Generator 100 / 110 kVA - NEW - - - - - Engine: - Iveco (Italy) - Model: NEF45 - 4 cylinders - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Leroy & Somer (France) - 100 / 110 kVA - 230 / 400 volts - 50 Hertz - AVR regulator - - - - - Control / Start Unit: - Digital start unit - With automatic start function - Generator monitoring: volts, amps, hertz, kW - Engine monitoring - Hour meter - Maintenance timer - Integrated battery charging function - - - - - Other data: - Dimensions: 267 x 113 cm - Weight: 1390 kg - Tank capacity: 290 litres - Sound level: approx. 66 dB (7m) - Consumption: 12.5 l/h (50%) / 17.6 l/h (75%) - - - - - Other: - An integrated socket package (see pictures) can be ordered for an extra charge - - - - - Scope of de ...

Net price: 20.000,- € Gross price: €23,800 - - - - - Iveco Emergency Power Generator 100 kVA - NEW + + incl. 1000 litre large tank + + - - - - - Engine: - Iveco (Italy) - Model: NEF45 - 4 cylinders - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Leroy & Somer (France) or Linz (Italy) - 100 / 110 kVA - 230 / 400 volts - 50 Hertz - AVR regulator - - - - - Control / Start Unit: - Digital ComAp AMF25 Start Unit - With automatic start function - Generator monitoring: volts, amps, hertz, kW - Engine monitoring - Hour meter - Maintenance timer - Integrated battery charging function - - - - - Other data: - Dimensions: 267 x 113 cm - Weight: approx. 1570 kg (without large tank) - Tank volume: 1000 litres - Sound level: approx. 66 dB (7m) - Consumption: 11.3 l/h (50%) / 15.9 l/h (75%) - - - - - Other: - An integrated socke ...

Inv. Num. : 6169 Type: Motoman DX 100 Producer: YASKAWA Created: 2011 Parameters: Switch-on hours: 12800 h Operating hours: 6000 h Axle number: 6 Max. horizontal reach: 1717 mm Min. vertical reach: 3063 mm Maximum load: 20 kg

Exhibition machineThe Holzprofi dehumidifier HT-100 is ideal for drying wood, but the dehumidifier can also be used for drying basements, construction sites, etc. Advantages and features:- High drying performance even at low temperatures, thanks to hot gas defrosting- Good dehumidification even at low humidity- High efficiency for energy-saving operation- High-quality machine from the industrial sector, durable and suitable for many applications.- The practical control system switches the

Inv. Num. : 8914 Type: MA 1400 - DX 100 Producer: Yaskawa Created: 2012 Parameters: Maximum arm reach: 1434 mm Number of axles: 6 pieces Maximum load capacity: 3 kg Machine weight: 130 kg

pressure: 100 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 400 mm table height: 925 mm stroke: 200 mm control: Cybelec DNC 8805 output: 11 kw total connected load: 15 kW weight of the machine ca.: 9,0 t range L-W-H: 5,2 x 2,1 x 2,9 m Used CNC- press brake - some upper tooling (no lover tooling) - Infrared security device - documentation - hydraulic Crowning - 2 axis backgauge X + R The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 2150 mm turning diameter over slide rest: 1800 mm turning length: 10000 mm speed: 1 - 300 U/min faceplate diameter: 1800 mm spindle bore: 200 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m - 4-jaw face plate Ø 1800 mm - 2 Steady rest Ø 100 to 560 mm and Ø 1.3 to 1.8 m - 4-way toolpost - tailstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Pulsotronic metal detector for liquid and pasty products in pipeline systems is available. Pipe diameter: 100mm, max. operating pressure: 10bar, max. operating temperature: 80°C, version: EX. Machine dimensions X/Y/Z: 1250mm/550mm/700mm, weight: approx. 50kg. On site inspection is possible.

General SKU412W1302 MakeHosokawa Alpine Type100AFG No.13576/1 Year of construction1988 Main Features Vacuumcheck Specified Features - Jet Mill Grindercheck Grinding room sizeDia 100mm With hoppercheck InletDN40 Feeding with rotating valvecheck K-Tron S 200 Motor0,25kW, 380V Speed12.000-22.000rpm Jet Mills MaterialStainless steel 1.4306 (304L), Stainless steel 1.4541 (321) Information Mounted on framecheck LocationBarneveld With switchgearcheck Floor space2x1,2 m Total height1,9 m Weight600 kg Extra Specificationsdata fluidized bed counter jet mill with classifier:grinding chamber diameter: 100mmnozzle diameter: 3x 1.9mmgrinding air flow rate 50-60m³/hfilling quantity molen: 0,8lspeed classifier: 2200-22.000rpmclassifying wheel dia: 50mmfines discharge Ø: 20 mmmotor: 1kW, 220V cyclone data:alpine cyclone GAZ140cyclone diameter: 140mm filter data:alpine filter k ...

This lathe was manufactured in 2017. The DMG MORI WASINO G 100 | 300 features a maximum turning diameter of 285 mm and a standard diameter of 60 mm. It supports bar work up to 38.1 mm and offers rapid traverse rates of 12000 mm/min on the X-axis and 20000 mm/min on the Z-axis. With a spindle speed up to 6000 min⁻¹, this machine is ideal for efficient operations. For more information about this lathe, please reach out to us.

This Takamaz X-100 was manufactured in 2006. A robust horizontal turning machine featuring a max turning diameter of 203 mm, spindle speed up to 4500 rpm, and a chuck diameter of 153 mm. Weighing 2500 kg, it underwent a spindle and ball screws overhaul in 2021. If you are looking to get high quality turning capabilities consider the Takamaz X-100 machine we have for sale. Contact us for more information.

This 5-axis Mazak Integrex 100 IV ST was manufactured in 2011. It features a main spindle with a 6 hydraulic chuck, 4,000 rpm max speed, and 30 kW power. The second spindle matches these capabilities. Its milling spindle can reach up to 20,000 rpm. Includes a high-speed ATC with a 20-tool capacity, expandable to 120. Ideal for single-setup machining with its heavy-duty construction and MAZATROL MATRIX CNC control. Contact us for more information about this machine.

This 5-axis HEDELIUS RS 100 K MAGNUM was manufactured in 2009. It features a travel range of 3500 x 1000 x 770 mm and a rotary-tilting table with a 1200 kg max workpiece weight. The spindle operates at speeds up to 6000 rpm, and the machine includes a 50-tool capacity magazine. If you are looking to get high-quality milling capabilities, consider the HEDELIUS RS 100 K MAGNUM machine we have for sale. Contact us for more information.

This 3-axis EMCO FamUp MCP 100-50 vertical machining center was manufactured in 2007. It features a Siemens 840-D control system, a 2-fold pallet changer, and a 30-fold tool changer with holders. The machine includes a screw chip conveyor and a fully protected cabin with safety doors. Ideal for operations requiring a table load up to 600 kg and speeds up to 10,000 rpm. Reach out for further details regarding this vertical machining center.

A Treif dicing and strip cutter for meat is available. Rated throughput capacity: approx. 800kg/h, cutting length range: 0.5mm-32mm, cutting chamber dimensions X/Y/Z: 96mm/96mm/30mm, grid set range: 4mm-96mm, machine dimensions X/Y/Z: approx. 1000mm/800mm/1000mm, weight: approx. 200kg. On-site inspection is possible.

General SKU251X209 MakePall LocationBarneveld CEcheck TypeNiro 600/100 B40 o.D. Pressure Working pressure6 Bar Main Features MaterialStainless steel Pressure6 Bar Surface6 m2 Specified Features - Filterpress MaterialStainless steel 1.4571 (316Ti) Filter presscheck Stainless steel platescheck19x thickness 20/40 mm Internal platen sizes590x590 mm External platen sizes600x600 mm Central inletDN50 With outlets on platenscheck Hydraulic closingcheck Information No.2111 Year of construction2007 Mounted on wheelscheck Floorspace0,80x4,10 m Total height1,40 m Weight750 kg Extra SpecificationsWith 19x9 mm stainless steel plates and 20/40 mm frames, 18x25 mm antistatic Polypropylene chamber plates and 18x40mm frames, 12x polypropylene chambers and 9 frames, Hydraulic unit, LP160, max operating pressure 700 bar, compression pressure 400 bar, : 6 bar, allowable temperat ...

This 5-axis TOS VARNSDORF W 100 A was manufactured in 1999. It operates on a voltage of 3PE ~ 400 V, with a frequency of 50 Hz and a current of 22 A. The machines power capacity is 15 kVA, and it weighs 70 kg. Consider the opportunity to buy this TOS VARNSDORF W 100 A horizontal machining centre. Contact us for more information.

This 5-axis DMG DMC 100 H was manufactured in 2005. It features a Siemens 840D powerline control with Shopmill, a 1,000 mm travel in X, Y, and Z axes, and a speed range up to 8,000 rpm. The machine includes a HSK 100 tool holder, 270/360 tool positions, and two 800 x 800 mm pallets. Consider the opportunity to buy this DMG DMC 100 H horizontal machining centre. Contact us for more information.

Folding box cartoning machine Uhlmann C 100 LA • Format range folding box W 30-100, H 15-75, L 70-200 mm • Output 15-100 folding cartons/min • For offset buckle on both sides • Product feed for blister via blister stacking chute • Code reading Laetus Argus for 2x brochure code (front + back), 1x folding box code, 1x brochure presence in folding box • Brochure folding and inserting machine from the GUK FA 21/4 Cartonac 91 magazine • Colour embossing station for folding flap opposite the insertion side, 2 lines, with embossing numbers • Poor ejection with ejection counter-control • Vacuum generators • PLC Eberle PLS 514 • Connection 400V/50Hz Optional: - New hardware/software Mitsubishi with 8" color touch panel - Code Reader Cognex Camera Reader System - Validation documentation - Hot melt machine

This 5-axis DMG DMC 100 H was manufactured in 2006. It features a Siemens 840D powerline control with Shopmill, and robust traverse paths of 1000 mm in X, Y, and Z axes. Equipped with a high-speed range up to 8000 rpm, dual gear stages, and an HSK 100 tool holder with up to 360 positions. Includes two 800x800 mm pallets and a B-axis at 0.001° precision. Contact us for more information about this machine.

greates pass round over bed: 1050 mm dist. between centers: 6000 mm centre height: 520 mm turning length: 4810 mm workpiece weight max. (main spindle): 6000 kg Maximum workpiece weight with steady rests: 8000 kg max. torque on the spindle: 12500 Nm number of spindle speeds: 2,8-560 1/min Speed range 24 levels: feed per revolution: 0,08-56 mm chuck diameter: 630 mm Maximum travel distance of the longitudinal slide: 4810 mm Maximum travel distance of the cross slide (suppor: 530 mm Maximum travel distance of the tool slide (support: 340 mm Tailstock quill diameter: 150 mm total power requirement: 31 kVA weight of the machine ca.: 10500 kg dimensions of the machine ca.: 7860 x 1970 x 1480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 380 mm table surface area: 1100x424 mm dayligth: 180/750 mm distance between columns: 1100 mm diameter of piston: 90 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU446W1483 LocationBarneveld CEcheck Main Features Motor0.75 KW Inlet diameter10 mm Specified Features - Jet Mill MaterialStainless steel 1.4306 (304L) Jet Mills Grinding room sizeDia. 100x16mm InletDia. 10 mm Motor0,75 kW, 230/400 volt, 1400 rpm, (Ex) With variable speed drivecheck Speed18/59/147 rpm Information MakeMicro-Macinazione SA TypeLU 100 IR BD Number0106100.1046.2070 Year of construction2006 Mounted on wheelscheck With switchcheck Floor space0,80 x 1,40 m Total height2,15 m Weight490 kgJet MillsMicromacinazioneMills > Jet MillsBrand > Micromacinazione What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Mechanical hole punch with a punching force of 1000 kN. Tool holder for punches up to 90 mm can be mounted on request. A large assortment of stamps and dies is included in the scope of delivery.

2 x Arburg 320 K 700-100 injection moulding machines 2001 and 2003

The CS-Matic 100 is offered with an accompanying feed belt (conveyor belt) Audion ACC2000/4, built in 2021. The machine is only electrically operated, no pneumatics, no compressed air necessary, the machine is very quiet in operation. Packaging capacity: up to 4200 packs per hour (depending on product size, package composition and film type) Speed of the conveyor belts: 10 - 30 m/min Maximum packing height: 200 mm Maximum packing width: 400 mm Maximum package weight: 30 kg Length of sealing: 500 mm Maximum size of film: 600 mm (centrally folded - ø 350 mm) Usable films (films): polyolefin (up to 30μ), polyethylene (from 15 to 80μ with optional sealing strip for PE) Size of the machine (L x W x H): 2170 x 1875 x 1665 mm Machine weight: 715 Kg Automatic adjustment of the center seal Automatic control of the weld bar height User-friendly LCD control panel, a 7" color touchs ...

This 6-axis KUKA KR 100-2 HA 2000 was manufactured in 2007. It features a TRUMPF TruDisk 6002 laser with a power range of 120–6000 W and a wavelength of 1030 nm. The robot arm is mounted on a KSL-2000/2700 linear axis, enhancing its operational flexibility. If you are looking to get high-quality welding capabilities, consider the KUKA KR 100-2 HA 2000 machine we have for sale. Contact us for more information about this machine.

General SKU212T481 MakeOchsner TypeCNY 100-340 Mach.No.49065 Main Features MaterialStainless steel Volume32000 Ltr. Motor12.5 KW Specified Features - Centrifugal Pump MaterialStainless steel Centrifugal Pumps Pumpcheck Number of pumps:1 Capacity32 m³/h With motorcheck 11/12,5 kW 380-420/440-480 Volt (ABB: type: MBT 160M) InletDN100 OutletDN65 Information Mounted on framecheck LocationBarneveld Floorspace1,5x0,65 m Total height0,6 m Weight600 kgCentrifugal PumpsOchsnerPumps > Centrifugal PumpsBrand > Ochsner What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This Sahinler HKP-Z 100 was manufactured in 2016. A robust C-frame PLC controlled deep drawing press, it features a pressure force of 1000 kN and a stroke of 500 mm. The machine includes a large table size of 900x600 mm and a throat depth of 300 mm, suitable for diverse punching and bending tasks. Consider the opportunity to buy this Sahinler HKP-Z 100 punching and bending machine. Contact us for more information about this machine.

General SKU412X1247 MakeCF Scheer & CIE LocationBarneveld TypeSGS 100-E Main Features Motor3 KW Width950 mm Specified Features - Pelletiser Pelletisercheck Rotor width100 mm Rotor diameter80 mm, 200 mm Number of rotor knives1 With roll feedingcheck Motor3 kW 220—240 380—420 V 1420 rpm Rotor speed0—1430 rpm Information No.21058787/8 Year of construction1992 Floorspace1,2 x 1 m Total height1,5 m Weight340 kgPelletisersScheer & CieMills > PelletisersBrand > Scheer & Cie What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 6-axis NAKAMURA WT-100 was manufactured in 2019 and features dual spindles with a speed of 6,000 rpm and a motor power of 11/7.5 kW each. It boasts a bar capacity of Ø42 mm and a maximum turning diameter of Ø190 mm. The machine includes a dodecagonal drum turret with 24 indexing positions and rapid traverse rates up to 40 m/min. If you are looking to get high-quality turning capabilities, consider the NAKAMURA WT-100 machine we have for sale. Contact us for more information.

This cable peeler is an immediately available used machine. It is workshop-tested and equipped with new knives. The Maxi 100 is an enormously versatile cable slitting machine with vertical cutting blades. No matter how thick or thin the insulation is, the cables are peeled to a tenth of a millimeter. Due to the strong interlocking, the cables do not slip, but are transported reliably. Damaged or thinner or thicker areas in the wiring harness are also well transported by the spring-mounted pull wheels. Blunt knives can be easily and inexpensively resharpened with a standard grinder. The Maxi 100 is suitable for practically any cable. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info

This 5-axis DECKEL MAHO DMC 100 T was manufactured in 2003. It features X, Y, Z travels of 1,180 mm, 710 mm, and 710 mm respectively, a SK40 tool magazine with 32 positions, internal coolant supply, and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMC 100 T vertical machining centre. Contact us for more information about this machine.

This Warcom DINAMICA 100.30 press brake was manufactured in 2016. It features a maximum force of 100 Ton, a working length of 3200 mm, and a motor power of 11 kW. Weighing 10,500 kg, it operates with a maximum working pressure of 250 bar. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 100.30 machine we have for sale. Contact us for more information about this machine.

Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible.

This 3-axis Flow MACH 100-4020 was manufactured in 2021, featuring a cutting area of 4020 × 2020 mm and a cantilever structure. It includes a FlowMaster® license, Flow PASER® 4 cutting head, and a Hyplex Prime 30 pump with a maximum pressure of 4,150 bar. Ideal for abrasive waterjet cutting with less than 800 operating hours. If you are looking to get high-quality cutting capabilities, consider the Flow MACH 100-4020 machine we have for sale. Contact us for more information.

A vertical carousel storage system (office lift) Hänel with front access is available. Trays: 18, tray arrangement: 4-lane, max. stack load per tray: 132kg, machine dimensions X/Y/Z: approx. 3300mm/1000mm/2850mm, weight: approx. 3000kg, control: MP0A. Documentation available. An on-site inspection is possible.

Manufacturer: Deckel Maho Model: DMC 100 U duoBLOCK Year of Manufacture: 2011 Find more here - / Contact us at -

TURBINE FLOWMETER DN100 Flow L1510404 Brand : IMARI

From the Gütersloh site, we offer a well-preserved eccentric press Pressure 100 t Projection 330 mm Stroke 10-130 mm Stroke rate 56 stroke/min Plunger adjustment 80 mm Table surface 830x600 mm Plunger area 250x130 mm Table height 870 mm Peg hole in plunger 50 mm Machine weight approx. 11 t Space requirement approx. WxDxH 2100x1900x3000 mm

Combined Cycle CHP Power Plant 12.5 MWe + 1.6 MW Chilled Water This combined cycle CHP plant consists of one Dual Fuel Solar Turbine Mars 100 with 40 bar steam boiler, Siemens SST 060 Back Pressure Steam Turbine and one Double Acting LS Absorption Chiller with electrical, mechanical and control auxiliaries. Plant is maintained according to manufacturer’s instruction. Gas turbine engine was changed to Solar refurbished unit in June 2023 and it has accumulated only about 16000 hours since that. Both the gas turbine and the steam turbine were last overhauled by OEM service in mid-2025 and thus equipment is in good operational condition. This combined cycle CHP (trigeneration) plant delivers 10 MWe of primary electrical output from a Solar Turbines Mars 100 dual-fuel gas turbine, with an additional 2.5 MWe from a Siemens SST 060 back-pressure steam turbine and 1.6 MWth of chilled w ...

Manufacturer: Widmann Model: SI 100 - Top Year of Manufacture: 2022 Certification: CE Electrical Data: - Apparent Power: 42 kVA - Frequency: 50/60 Hz - Voltage: 3 x 400 V / N / PE - Current: 80 A Machine Cycles: 695,067 - Total Cycles: 810,321 - Total Operating Hours: 268 h Find more here - / Contact us at -

BILLION HERCULE 100 T Reference: H260/100 Condition: Very good Technical Specifications: Clamping force: 100 T / 1000 KN Tie bar spacing: 445 x 445 mm Platen dimensions: 630 x 630 mm Mold thickness (Min/Max): 180- 400 mm Opening stroke: 380 mm Injection volume: 139 cm³ Injection pressure: 1843 bar Screw diameter: 35 mm L/D ratio: 20 Dimensions & Weight: Weight: 5 100 kg

Ref. no.: 17540 Hersteller: ARBURG Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg

Code: 0297 Brand: COSMEC Model: SM 100 Automatic multi blade saw for wooden boards, sawmills, carpentry workshops, wooden window frames and various Technical data: Conveyor belt width 100 mm Max cutting height 100 mm Min/max sawblade diameter mm 250/300 Hole 60 Motor 20 Hp Blade feed speed 5/30 mt/min Feed motor 1 Hp Non-return protections Conveyor belt lubrication pump Weight kg 1200

Technical data: Travel X/Y/Z: 700 / 250 / 430 mm Top slide travel: 630 mm Spindle speeds: 45 - 1660 1/min Spindle holder: SK 40 Control: conventional Feed table: 24 - 402 mm/min Milling head rotatable: 360° Table size: 1120 x 260 mm Spindle drive: 2.2 kW Total power requirement: 2.4 kVA Dimensions (WxDxH), approx.: 1600 x 1700 x 1700 mm Weight, approx.: 1200 kg Equipment: - Digital display - Machine light - Coolant device - Machine shoes

GT-5290 Ripper - Brand: SCOINER - Model: 150/1300/100 - With horizontal hydraulic pusher and vertical hydraulic pusher - Rotor length: 1450 - Diameter: 500 - Engine: 100 hp (75 kw) - Dice: 30x30 - With hopper - With electric control - Year: 2000