hp 100 used for sale

Manufacturer: Widmann Model: SI 100 - Top Year of Manufacture: 2022 Certification: CE Electrical Data: - Apparent Power: 42 kVA - Frequency: 50/60 Hz - Voltage: 3 x 400 V / N / PE - Current: 80 A Machine Cycles: 695,067 - Total Cycles: 810,321 - Total Operating Hours: 268 h Find more here - / Contact us at -

Ref. no.: 17540 Manufacturer: ARBURG Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg Further information: Laboratory Machine with Exceptionally Low Operating Hours The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes. The control system shows only approximately 100 operating hours and just 867 machine cycles. The machine is equipped with a hydraulic drive system and the proven ARBUR ...

Code: 0297 Brand: COSMEC Model: SM 100 Automatic multi blade saw for wooden boards, sawmills, carpentry workshops, wooden window frames and various Technical data: Conveyor belt width 250 mm Max cutting height 100 mm Min/max sawblade diameter mm 250/300 Hole 60 Motor 20 Hp Blade feed speed 5/30 mt/min Feed motor 1 Hp Non-return protections Conveyor belt lubrication pump Weight kg 1200

Technical data: Travel X/Y/Z: 700 / 250 / 430 mm Top slide travel: 630 mm Spindle speeds: 45 - 1660 1/min Spindle holder: SK 40 Control: conventional Feed table: 24 - 402 mm/min Milling head rotatable: 360° Table size: 1120 x 260 mm Spindle drive: 2.2 kW Total power requirement: 2.4 kVA Dimensions (WxDxH), approx.: 1600 x 1700 x 1700 mm Weight, approx.: 1200 kg Equipment: - Digital display - Machine light - Coolant device - Machine shoes

Centrifugal pump, diesel fuel Pressure 6 bar, Pump capacity 200 m3/h el.mootor Siemens 55 kw , 2940 rpm , 100 A 6 pcs.

This automated label applicator was used for inline labeling of products.

Key data: 3 , 40 , 14

Capasity 14,4 m3 Pressure 40 bar rpm 1450 power demand 3,6 kW

General SKU409X1297 LocationBarneveld CEcheck Specified Features - Miscellaneous CapacityMax. Irradiation intensity up to 3.000 mW/cm2 Motor100-240 volt CapacityWavelength: 365,385,395,405 and 460 nm Information MakeHonle TypeLed Cube 100 Floor space1,00x0,40 m Total height0,45 m Weight25 kg Extra SpecificationsWith 3x UV chambers, type led cube 100 with led spot, chamber size 195x186x195 mm, : 1x powerdrive, type 120 MiscellaneousDr. HönleMiscellaneous > MiscellaneousBrand > Dr. Hönle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU242U269 LocationBarneveld CEcheck MakeEmde Main Features MaterialStainless steel Volume190 Ltr. Motor3 KW Specified Features - Ribbon blender Ribbon blendercheck Capacitymax. 190 Ltr. Inletdumping cabinet: 850x450 mm Outlet315x230 mm Motor3 kW 220-240/380-415 Volt Speed mixing shaft26 rpm MaterialStainless steel Information TypeESM80/ST100 No.A108 0905-11/A108- 0905-12 Floor space2,1x1,2 m Total height1,6 m Weight700 kg Extra Specificationswith lump breaker: motor 4 kW 220/380: speed: 1400 rpm Ribbon blendersEmde NassauMixers > Ribbon blendersBrand > Emde Nassau What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU416W1314 LocationBarneveld CEcheck MakeLessine Main Features Motor7.5 KW Inlet diameter100 mm Width100 mm Specified Features - Pin Mill Pin disc millcheck Rotor size270 mm Grinding room size320 mm Number of pins on house side:45 Number of pins on door side:100 Pin diameter12 Housing dimensions Dia. 400 mm InletDia. 100 mm Motor7,5 kW (400 V, 1470 rpm) Speed3000 rpm Pin Mills MaterialStainless steel 1.4306 (304L) Information TypeEL 100 No.21-1132 Year of construction2021 Mounted on framecheck Floor space0,70x1,30 m Total height0,70 m Weight500 kgPin MillsLessineMills > Pin MillsBrand > Lessine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld f ...

General SKU366W1225 LocationBarneveld Main Features MaterialGlass Volume100 Ltr. Specified Features - Vertical tank Closed vertical tankcheck Capacity100 l. Vessel sizesdia. 500x1000mm Top connectionsDN80/DN40 OutletDN40 MaterialGlass With jacketcheck General MakeGVF Glasstechnik Floorspace0,65x0,65 m Total height1,4 mVertical tanksQVF GlasstechnikTanks > Vertical tanksBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU354T1021 LocationBarneveld Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume100 Ltr. Motor0.3 KW Specified Features - Stirring vessel Open stirring vesselcheck Capacity100 Ltr. Vessel sizesdia. 500x690 mm Conical bottomcheck Outletdia. 60 mm With jacketcheck With anchor stirrercheck Motor0,3 kW 220/380 Volt Speed mixing shaft20-120 rpm MaterialStainless steel With jacketcheck General Makeunknown: missing nameplate Mounted on legscheck Floorspace0,8x0,6 m Total height1,7 m Weight300 kgStirring vessels-Stirring vessels > Stirring vesselsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machin ...

Key data: 100 mm, 1600 mm, 1120 mm

Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1200 rpm Axis W ... 900mm Axis Z ... 1250mm Spindle mount... ISO 50. Clamping table surface... 1250 x 1250mm Max. table load ... 3000kg Main engine power ... 11kW L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14 000kg The machine is in good condition, possible to test under power.

B&A REF: 9269 TON: 60 SCREW DIAMETER: 25MM SHOT WEIGHT: 45 STROKE VOLUME: 49CM3 INJECTION PRESSURE: 2240AR PLATEN SIZES: 446 X 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT: 200MM MOULD OPENING STROKE: 350MM MAX DAYLIGHT: 550MM EJECTOR STROKE: 125MM AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 4.9KW SCREW DRIVE: HYDRAULIC

EDM machine Charmilles Robofil 100

This 3-axis Baublys Control Laser UL 65QR/NC 100 50 50 SOMA was manufactured in 2008. It features a Q-switched solid-state Nd:YAG laser, capable of reaching frequencies up to 50 kHz. The machine includes a round transfer table of approximately 75 cm and is housed in a 2.4 x 2.6 meters enclosure. If you are looking to get high-quality laser marking capabilities consider the Baublys Control Laser UL 65QR/NC 100 50 50 SOMA machine we have for sale.Contact us for more information.

General SKU408S978 LocationBarneveld MakeKoruma Maschinenbau GmbH (D) TypeDisho In-Line 0/100 Main Features MaterialStainless steel Motor5.5 KW Inlet diameter32 mm Rotor100 mm Specified Features - Inline mixer Continuous reactorIn Line Dispersing and Homogenising Rotor sizesdia. 100 InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Rotor speed2885 rpm With vesselcheck Capacity40 ltr. Vessel sizesdia. 390x400mm with stirrer 0,55 kW 230/400 Volt 309-1539 rpm MaterialStainless steel 1.4571 (316Ti) Inline high shear mixers InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Speed2885 rpm With propellor stirrercheck Motor0,55 kW 230/400 Volt With variable speed drivecheck Speed309-1539 rpm Information No.5389 Year of construction1995 Mounted on framecheck With switchcheck Floorspace1,2x0,6 M Total height1,7 M Weight200  ...

General SKUR1300 MakeL.A. Wolf Spezialmaschinen GmbH (D) TypeMK 2/100 Year of construction1989 LocationBarneveld Main Features MaterialStainless steel Volume100 Ltr. Motor7.5 KW Inlet diameter250 mm Specified Features - Kneader Paddle mixercheck Double shaftcheck Useful capacity100 ltr Trough sizes700x600x500mm With covercheck Inletdia. 250mm Outletdia 150mm With jacketcheck With adjustable packing glandscheck Motor7,5 kW 380 Volt With jacketcheck Kneaders Jacketcheck Inletdia. 250mm Bottom outletdia. 150mm Capacity100 ltr. Double shaft kneadercheck Trough sizes700x600x500mm With adjustable packing glandscheck With covercheck Motor7,5 kW 380 Volt MaterialStainless steel General With switchcheck Floorspace1,5x1,4 M Floor space1,5x1,4 M Total height1,7 M Weight1500 KgKneadersL.A. Wolf SpezialmaschinenKneaders > KneadersBrand > L.A. Wolf Spezialmaschi ...

General SKU289P522 LocationBarneveld MakeVötsch Industrietechnik GmbH TypeNTSD 75/100 Main Features MaterialStainless steel Volume562 Ltr. Max.temp.280 °C Specified Features - Drying oven Drying oven:hot air sterilizer: Max. temperature280 degr.C. Number of compartments:1 Capacity562 dm3, (Total steam capacity 1,19m3) Internal width750mm Internal depth750mm Internal height1100mm Electric capacity16,2 KW Number of doors:1 + 1 (Sterile and non-Sterile side) With air circulationcheck With fancheck Motor1,1 KW, 400 Volt With racks(3x) With timercheck MaterialStainless steel 1.4301 (304) With jacketcheck General Machine number577 81049 Year of construction1998 With switchcheck With switchgearcheck Floorspace1,6x1,3 M Total height2,1 M Weight900 KG Extra SpecificationsRated capacity 16,2 kW, with circulating air Fan 1,1 KW, 400 VoltDrying ovensVötschDryers ...

Swisstool 100 x 3 mm (fixed) Capacity : 100 x 3 mm Strokes/min: 110 str/min Fixed angle -- variable angle: fixed angle Driven: pneumatic

pressure: 100 t distance between columns: 400 mm stroke: 20 - 140 mm table surface area: 900 x 710 mm ram surface: 560 x 450 mm ram adjustment: 80 mm dayligth: 470 mm no. of strokes: 70 Hub/min total power requirement: 10,5 kW weight of the machine ca.: 9 t dimensions of machine L x W x H: 1,98 x 1,60 x 3,10 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKUR1123 MakeWLS Gabler Maschinenbau KG (D) TypeDE 100/100 No.12482 Year of construction1992 LocationBarneveld Main Features Motor18.5 KW Inlet diameter100 mm L/D9 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter100mm L/D9.4 Co-rotatingcheck Number of heating zones:2 AC-motor18,5 kW 380/660 Volt Feeding with hoppercheck MaterialStainless steel With jacketcheck General With switchgear( as is ) Floorspace2,5x1,3 M Total height1,7 M Weight2150 Kg Extra SpecificationsIncluding 1 piece Single Temperiertechnik heating units STW 150 / 1-9-20-K1S 9 kW 400 Voltincluding 2 spare screwsDouble screw extrudersWLS GablerExtruders > Double screw extrudersBrand > WLS Gabler What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ...

TECHNICAL SPECIFICATIONS Description: Cement silos / building material silos Number of silos: 3 pcs. Version: 2 x single chamber / 1 x double chamber silo Capacity: 3 x 100 tons. Number of screw conveyors: 4 pcs. SPECIFIC COMMENT - Also available individually - Incl. pneumatic compressed air filling - Incl. dedusting filter

Key data: 100 t

For sale is a used spotting press from the manufacturer Reis with an adjustable press force of up to 100 t. The 4-column press has a table size of 1600 × 1300 mm, a maximum open height of 950 mm and an ejector in the table, making it particularly suitable for spotting, tuning and tool work in mould and tool making. Here are the technical data of the offered machine: Technical data + information: Spotting press – REIS TUS 80-100 Allgemeine Disclosures - Name: spotting press - Manufacturer: REIS - Type: TUS 80-100 - Type: 4-column press - Year of construction: 1998 - Press force: 26–100 T (adjustable) - Retraction force max.: 45 T - Table size: 1600 x 1300 mm - Max. table load: 5,000 kg - Open height max.: 950 mm - Overall dimensions (WxDxH): approx. 3400 x 4200 x 3700 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm Hydraulik - Hydraulic pum ...

The machine is in very good technical condition, testing is possible by prior arrangement.

• Year of manufacture: 2020, • Operating hours: about 2,200 h, • Rotor: Diameter 860 mm, Width 830 mm, • Drive: Direct drive via coupling, • Crusher box: 4 impact bars, 2 impact plates, • Rear leg unit (in RS): 2.44 m × 1.2 m (8 × 4) with oversize backfeed, • Task opening: 860 mm × 720 mm, • Transport weight: approx. 30 t, • Application: concrete, asphalt, construction debris and natural stone, Task funnel, • Hopper capacity: 2.6 m³, • Task height: 3.0 m, • Width at the back: 2.0 m, • Sieve area: 1,080 × 810 mm, • Year of construction: 2020, • Operating hours: approx. 2,200 h, • Drive: Direct drive via clutch, • Crusher box: 4 strike bars, 2 impact plates, • Transport weight: approx. 30 t, • Funnel capacity: 2,6 m³, • Task height: 3,0 m, • sieve surface: 1.080 × 810 mm

A repair-required CNC press brake Amada is available. Press force: 1000kN, max. stroke: 200mm, working width: 3100mm, passage: 2690mm, throat depth: 400mm. Machine dimensions X/Y/Z: approx. 3600mm/2100mm/2600mm, weight: approx. 6500kg, operating hours: approx. 37661h. The cylinder control has a defect. Documentation available. An on-site inspection is possible.

through-put width: - mm working heigth: - mm : - serial number: 2044 total power requirement: - kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 4770 mm swing diameter: 10000 mm turning height: 3500 mm table load: 100 t turning speeds: 40 U/min table drive: 125 kW Control: Siemens type: 840 D Rest: 1 slide adjustment: 1421 mm ram head dimension: 250x250 mm inclination: +/-30 ° live tooling: 16 Kw spindle taper ISO: 50 spindle turning speed range: 3000 U/min chip conveyor: total power requirement: 150 kW weight of the machine ca.: t dimensions of the machine ca.: m Machiney Refurbished 2003 Table extension up to 8000 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, ...

ID3691 Atlas Speedcut 100 year/Baujahr 2013 Wire saw, engine defect Wire saw, motor defect

For sale is a hydraulic single-column press (C-frame) with a press force of 100 t. The machine has a table size of 700 × 750 mm, a maximum installation height of 550 mm and a stroke of 400 mm, making it suitable for a wide range of pressing, assembly and forming work in industry and production. Technical data + information: Hydraulic Single Post Press – C-Frame – 100 T Allgemeine Disclosures - Type: Single column press / C-frame - Press force: 100 T - Table size: 700 x 750 mm - Max. distance plunger – table: 550 mm - Working height: 1000 mm - Overall dimensions (WxDxH): 1200 x 1150 x 2550 mm - Total weight: approx. 5,800 kg - Frame: welded steel frame - T-slots / holes: DIN 650 / 22 mm Hydraulikzylinder - Stroke: 400 mm - Piston rod Ø: 80 mm - Cylinder Ø: 140 mm - Max. working pressure: 270 bar - Replaceable crimping head: Ø 100 mm Hydraulikaggregat ...

(1961) 100t Müller-Weingarten Eccentric Press High-Precision Mechanical Press This Müller-Weingarten model is a versatile industrial workhorse featuring a variable stroke and a high-performance 11 kW motor. Designed for heavy-duty applications, it can process material thicknesses up to 12 mm with a consistent operating speed of 55 strokes per minute. Technical Details ‍ Machine Type: Eccentric Press Manufacturer: Müller-Weingarten Model: ER 100 Year of Manufacture: 1961 Nominal Force: 100t Maximum Material Thickness: 12 mm Stroke Rate: 55 strokes/min Ram Stroke (Adjustable): 8 mm – 112 mm Ram Adjustment: 80 mm Shut Height (Die Space): 355 mm – 407 mm Overrun Time (Stopping Time): 0.174 Seconds Safety Distance: 278 mm Motor Power: 11 kW

(1975) 100t IWK Eccentric Press Industrial Eccentric Press for High-Capacity Stamping This 100-ton eccentric press from 1975 features a robust electrical configuration designed for versatile industrial manufacturing. Technical Details ‍ Machine Type: Eccentric Press Manufacturer: IWK Model: PEDRS 100 Year of Manufacture: 1975 Machine Number: 22/20076/3 Circuit Diagram Number: 911 871 Nominal Force: 100t Mains Connection 1: 380 V, 3-Phase, 50 Hz, 36 A Mains Connection 2: 220 V Max. Back-up Fuse: 80 A Control Voltage: 220 V (AC) / 24 V (AC) / 24 V (DC) Lighting Voltage: 220 V

(1963) 100t Müller-Weingarten Eccentric Press High-Precision Mechanical Press This Müller-Weingarten model is a versatile industrial workhorse featuring a variable stroke and a high-performance 11 kW motor. Designed for heavy-duty applications, it can process material thicknesses up to 12 mm with a consistent operating speed of 55 strokes per minute. Technical Details ‍ Machine Type: Eccentric Press Manufacturer: Müller-Weingarten Model: ER 100 Year of Manufacture: 1963 Nominal Force: 100t Maximum Material Thickness: 12 mm Stroke Rate: 55 strokes/min Ram Stroke (Adjustable): 8 mm – 112 mm Ram Adjustment: 80 mm Shut Height Range (Die Space): 355 mm – 407 mm Overrun Time (Stopping Time): 0.154 Seconds Safety Distance: 246 mm Motor Power: 11 kW

(1984) 100t Müller-Weingarten Eccentric Press High-Speed Single-Column Eccentric Press with Versatile Stroke Adjustment This Müller-Weingarten press is a highly adaptable industrial machine, featuring a 100-ton nominal force and an impressive stroke rate of 60 per minute. Technical Details ‍ Machine Type: Eccentric Press Manufacturer: Müller-Weingarten Model: ARP 100 Year of Manufacture: 1984 Nominal Force: 100t Stroke Rate: 60 strokes/min Throat Depth (Projection): 375 mm Frame Passage (Front to Back): approx. 570 mm Max. Distance (Table to Ram): 384 mm Adjustable Ram Stroke: 8 mm – 137 mm Intermediate Strokes: 8, 23, 43, 63, 81, 97, 111, 122, 130, 135, 137 mm Ram Adjustment: 80 mm Ram Clamping Surface (W x D): 700 mm × 450 mm Ram Shank Hole (Ø x Depth): 50 mm × 85 mm Ejector Travel: 55 mm Table Clamping Surface (W x D): 920 mm × 660 mm Tabl ...

(1979) 100t Müller-Weingarten Eccentric Press High-Utility Eccentric Press for Flexible Stamping and Forming Operations This Müller-Weingarten model is a versatile single-column (C-frame) press designed for high-speed production with a stroke rate of 60 per minute. It features a comprehensive range of 11 adjustable stroke settings, making it highly adaptable for various industrial metalworking tasks from shallow blanking to deeper forming. Technical Details ‍ Machine Type: Eccentric Press Manufacturer: Müller-Weingarten Model: ARP 100‍ Year of Manufacture: 1984‍ Nominal Force: 100t‍ Stroke Rate: 60 strokes/min‍ Throat Depth (Projection): 375 mm‍ Body Passage (Front to Back): approx. 570 mm‍ Max. Distance (Table to Ram): 384 mm (at bottom of stroke, adjustment at top)‍ Adjustable Ram Stroke: 8 mm – 137 mm‍ Intermediate Strokes: 8, 23, 43 ...

(1979) 100t Heilbronn Eccentric Press High-Speed Eccentric Press for Precision Metalworking This Heilbronn eccentric press combines a high stroke rate of 60 per minute with a versatile adjustable ram stroke, making it ideal for rapid stamping cycles. Technical Details ‍ Macine Type: Eccentric Press Manufacturer: Heilbronn Model: EPR 100 Year of Manufacture: 1979 Nominal Force: 100t Stroke Rate: 60 strokes/min Ram Stroke (Adjustable): 6 – 100 mm Ram Adjustment: 80 mm Overrun Time (Stopping Time): 0.140 seconds Safety Distance: 224 mm Motor Power: 5.5 kW

(1995) 100t Paul Müller Eccentric Press C-Frame Press with Hydraulic Clutch System This Paul Müller press is characterized by its hydraulic clutch system and a 60 strokes-per-minute cycle rate, making it a high-utility asset for precision stamping and blanking operations. Technical Details Machine Type: Eccentric Press Manufacturer: Paul Müller Model: EXP 100 RF-HK Year of Manufacture: 1995 / 2015 Nominal Capacity: 100t Working Capacity: 9,530 Nm Stroke Rate: 60 strokes/min Adjustable Ram Stroke: 10 – 100 mm Ram Adjustment: 60 mm Shut Height: 390 mm Throat Depth: 300 mm Table Clamping Surface (W x D): 900 mm x 600 mm Table Passage: 300 mm x 200 mm Ram Clamping Surface (W x D): 440 mm x 235 mm Ram Spigot Hole (Ø x Depth): 50 mm x 85 mm Max. Material Thickness: approx. 12 mm Max. Upper Tool Weight: 160 kg Drive Motor: 7.5 kW Hydraulic Clutch: Type  ...

A robot-assisted welding system from Cloos with a Kuka robot is available. Robot weight: 1155kg, control system: Qirox C Romat 520, control weight: 300kg, robot axes: 6. Documentation available. An on-site inspection is possible.

pressure: 100 t table length: 1800 mm table width: 1550 mm table travel: 2000 mm dayligth: 1800 mm total power requirement: 19,5 KVA weight of the machine ca.: 22 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Treif Dicer Type Felix 100 With cutting set 24x24 mm Year of construction 2009 Other cutting set sizes on request

A laser cross-welding system is offered. Fiber laser 1500W water-cooled, cooling unit integrated, pallet truck guide, shielding gas supply, weld seam pressing device, remote access RMACC01 SECOMEA, strip width max.: 110mm, strip material: steel: 0.25mm-3.0mm, C steel: 0.25mm-2.5mm, aluminum: 0.25mm-2.5mm, copper: 0.20mm-1.2mm, dimensions W/H/L: 650mm/2054mm/1050mm, weight: approx. 650kg. Inspection possible by appointment.

General SKU223Y099 LocationBarneveld MakeAlpine Main Features Motor1 KW Inlet diameter35 mm Width100 mm Specified Features - Jet Mill Grindercheck Rotor sizeø 50 mm Grinding room sizeø 100 mm With hoppercheck Inletø 35 mm Motor0,25 kW, (380 V, 2860 rpm (Ex)) With variable speed drivecheck With jacketcheck Jet Mills MaterialStainless steel 1.4541 (321) General TypeAFG-100 Year of construction1985 Mounted on wheelscheck With switchgearcheck Floor space1,70 x 1,10 m Total height2,40 m Extra SpecificationsWith K-Tron dosing screw, type T20A, 0.25 kW:Becker vacuum pump:Alpine stainless steel filter, type K6R, 2.4 m²:with spare rotors and parts:Jet MillsAlpineMills > Jet MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome  ...

An Arburg plastic granulate dryer with integrated material conveying is available. Hopper volume: 100l, max. drying temperature: 150°C, heating capacity: 4.5kW, air capacity: 90m³/h, conveying height: approx. 3000mm, machine dimensions X/Y/Z: approx. 950mm/600mm/2000mm, weight: approx. 150kg. An on-site inspection is possible.

pressure: 100 t stroke: 300 mm table surface area: 1070 x 260 mm column travel between the guideways: 1070 mm ajustment speed: 8.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec oil volume: 90.0 l engine output: 5.5 kW weight of the machine ca.: 1500 kg. dimensions of the machine ca.: 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand  ...

CNC Press Brake Manufacturer: Blemas Type: 100-33 Year of Make: 1994 CNC control: Cybelec DNC 74 PSG Pressing force: 100 tons Working width: 3 m Weight approx. : 8 to. Approx. dimensions: 3,600 x 1,600 x 2,600 mm

Inv. Num. : 8997 Type: SKT 100 Producer: KIA Created: 2006 Parameters: Control System: FANUC Series Oi-TB Switch-on hours: 65471 h Hours: 19209 h Max. turning length: 300 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 550 mm Maximum turning diameter over support: 350 mm Maximum length of travel in the X-axis: 210 mm Maximum feed in the Z-axis: 330 mm Maximum spindle speed: 6000 1/min Spindle taper: Morse 4 Max. rod diameter: 45 mm Lathe chuck diameter: 165 mm Weight: 3800 kg

Key data: 100 KW, 220 kVA, 400 V

Kuntschar & Schlüter gas-fired CHP GTK 100 Gas electricity and heat generators from 2016, 46,197 operating hours, with electrical cabinet and silencer. 94 KWel x 1,500 rpm, 400 V / 50 Hz. AC Generator: MarelliGenerators MJB 250 LA4, 220 KVA Manufacturer: Kuntschar & Schlüter Model: GTK 100 Type: Natural Gas CHP Serial number: 01345 Engine: HMG 645 S Engine power [KW]: 100 Electric power [KW]: 94 Thermal power [KW]: 143 Year of Make: 2016 Hours: 46,197 Dimensions LxWxH [m]: 3.5 x 1.05 x 2.00 Total unit weight [kg]: 3,850 AC Generator: MarelliGenerators MJB 250 LA4 Manufacturer: MarelliGenerators Model: MJB 250 LA4 Type: AC Synchronous Generator Serial Number: MDMO1565 Power [KVA]: 220 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 318 Speed [1/min]: 1,500 Year of Make: 2016 Hours: 46,197 Weight [kg]: 650

x-travel: 1.150 mm y-travel: 710 mm z-travel: 710 mm b-axis: +30 / -120 ° surface area: 1.500 x 795 mm milling head: universal, stufenlos spindle: 28 kW turning speeds: 20 - 18.000 U/min tool changer: auto. number of tools: 60 Control: HEIDENHAIN iTNC530 weight of the machine ca.: 12 t dimensions of the machine ca.: 6 x 3,2 x 3,4 m CNC universal milling machine in a very stable ‘monoBLOCK’ design, ideal for single-part and small-batch production with swivel spindle, NC dividing head and tool magazine. • NC-swivel milling head hydraulically clampable, with HSK-A63 spindle taper and 18,000 rpm motor spindle • LEHMANN vertical NC dividing head mounted on the machine table for 5-axis simultaneous machining with tailstock • DMG ERGOline® Control with 19 screen and HEIDENHAIN iTNC530 3D contouring control • Production package with RotoClear viewing window, 600-litre coolant tank, ...

Aroma system Isernhäger A 100 Isernhäger A 100 for thermally guided pre-doughs for the individual production of swelling, broth, cooking and flavouring pieces Simple controls Robust technology Machine mobile Connection 400V, 16A-CEE plug Used machine