hp 100 used for sale

Type 100 Briquette diameter 70 mm Press capacity 90 - 120 kg / hour Briquette length approx. adjustable 45 mm Hopper volume 0,75 m3 Pump motor input 11 kW Power consumption 8,2 kW/ hour Required input voltage and current 3x400V, 32 A Oil cooler yes Operation continuous Automatic reverse of support wheels yes Automatic switching-out yes Maximum percentage of moisture 15 % Specific weight of briquettes 900-1100 kg/m3 Maximum noise level 68 dB Transport dimensions 2220 - 1200 – 1510 mm Weight 810 kg

grinding length: 6000 mm grinding width: 500 mm workpiece height: 250 mm speed of grinding head: 0,02 - 30 m/min table width: 700 mm segment head diameter: 630 mm grinding motor: 110 kW grinding wheel speeds: 1500 U/min magnetic clamping plate: 6200 x 200 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m Precision vertical surface grinding machine equipped with : - segment grinding head - magnetic table 6200 x 200mm - inclinable - Traction drive grinding head by direct current via toothed rack - Coolant tank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutter Rex Düker Hydro 100, completely in stainless steel, with ejector, bowl capacity 100 litres, Stepless knife speed, mixing gears, Connection 400V, main motor 35kW, weight approx. 1750kg, good used condition, fully functional

An electric rapid steam generator made by Jumag is offered. The steam generator has run little and is in good condition. Technical data: - max. permissible Pressure PS 12.5 bar - Test pressure PT/PP 32bar/24bar - max. permissible Temperature TS: 200°C - Max. electric heating power: 100 kW - Weight: 395kg For more data on steam output, etc., see the pictures.

Thermoforming press Jochnick & Norrmans 150/ton upper cylinder 100 Ton Lower Cylinder Table 1000x1000mm Built in 1973 New electrical cabinet in 1998 With light screen and wiring diagram Now in stock Price is freely loaded

Technical data see Pictures attached

PRESS DESIGN   drive system: hydraulic   frame design: C-frame, single sided   table cushion: yes   opening in table: yes PRESS FORCES   total force (nominal): 100 to PRESS TABLE   table surface (left-right): 710 mm   table surface (front-back): 560 mm SLIDE   slide force: 100 to   table surface (left-right): 560 mm   table surface (front-back): 450 mm   spigot hole diameter: 50 mm   stroke: 320 mm   thickness of bolster plate: 150 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 340 mm/s   working velocity max.: 32 mm/s   return velocity max.: 330 mm/s SLIDE EJECTOR / CUSHION   nominal force: 2 to   stroke: 40 mm DIE CUSHION (TABLE CUSHION)   cushion force: 10 to   stroke: 80 mm TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 455 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 300 mm   sheet t ...

A container with agitator including three smaller mobile tanks and a small control cabinet is available. Large tank volume: 1000l, large tank diameter: 1000mm. Small tank test pressure: 1.5bar, small tank operating pressure: 1bar, small tank volume: 150l, small tank year of manufacture: 1999. An on-site inspection is possible.

A complete low-pressure steam boiler system Viessmann is available. 1) Condensate unit Viessmann TWA-T LS 0,9, max. operating pressure: 0.1bar, test pressure: 0.2bar, max. temperature: 110°C, water volume: 400l. 2) Dosing system Schweizer-Chemie EMP 2.5l E60. 3) Steam generator Viessmann Vitoplex 100-LS, year of manufacture: 2019, nominal heat output: 460kW, steam capacity: 700kg/h, water volume: 960l, operating pressure: 1bar, test pressure: 4.8bar. 4) Control cabinet Viessmann Vitocontrol HS. 5) Steam accumulator/pressure vessel Viessmann RBS/1 1000 So. steam, volume shell space/tube space: 990l/17l, max. operating overpressure shell space/tube space: 10bar/2.5bar, max. operating temperature shell space/tube space: 95°C/130°C, test pressure shell space/tube space: 13bar/4bar. Documentation available. An on-site inspection is possible.

pressure: 100 t stroke: 300 mm table surface area: 1070 x 315 mm column travel between the guideways: 1070 mm ajustment speed: 8.0 mm/sec working feed: 5.0 mm/sec return speed: 10.0 mm/sec oil volume: 90.0 l engine output: 5.5 kW weight of the machine ca.: 1870 kg. dimensions of the machine ca.: 2050 x 1000 x 2200 mm Furnishing: - Robust electro-hydraulic workshop press, with adjustable cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hy ...

The Automatic Liquid Filling and Capping Machine by YQ MACHINERY CO LIMITED offers an inline solution for efficient packaging. Designed for easy operation and reliability, this machine is perfect for businesses in the material handling and packing industries, ensuring accurate filling and capping of liquid products. Where It’s Used: Beverage industry (bottled water, soda) Pharmaceuticals (medicine bottles) CBD/hemp oil bottling Cosmetics (shampoo, lotion bottles) Vape e-liquid production

General SKU366W1212 MakeQVF Glasstechnik TypeVSV 100 No.B1.31 LocationBarneveld Main Features MaterialGlass Volume100 Ltr. Specified Features - Vertical tank Closed vertical tankcheck Capacity100 l. Vessel sizesdia. 600x700 mm Dished bottomcheck Top connectionsDN150 OutletDN40 MaterialBorosilicate Glass 3.3 With jacketcheck General Floorspace0,60x0,60 m Total height1,00 mVertical tanksQVF GlasstechnikTanks > Vertical tanksBrand > QVF Glasstechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Largest grinding length 1200 mm Longest grinding length with table dresser 1000 mm Largest grinding width 600 mm Grinding height (table bottom edge grinding wheel) 550 mm Table load with magnetic pallet 975 kg Table load without magnetic plate 1200 kg Table speed 1 - 40 m/min Grinding spindle Motor spindle 11 KW Grinding wheel 406 x 152.4 x 100 mm Speed 1400 rpm Longitudinal axis (z-axis) Rapid traverse 5 m/min Adjustable feed rate 1 - 50 mm Infinitely adjustable feed 0 - 2000 mm/min smallest infeed 0.001 mm Perpendicular axis (y-axis) Rapid traverse 1.5 m/min smallest infeed 0.001 mm Space requirement approx. 4450 x 2935 x 2540 mm Total weight approx. 6700 kg Equipment: - Electropermanent magnetic clamping plate 1000 x 500 mm incl. electron. Control module and potentiometer - Coolant cleaning system with paper filter and magnetic separator 350 l - fl ...

Key data: 100 mm, 3000 mm

Radial drilling machine CSEPEL RFH-100 / 3000 – technically flawless Description: For sale is a used radial drilling machine / column drilling machine / column drilling machine from the manufacturer CSEPEL, type RFH-100 / 3000. The machine is technically flawless and ready for use in the workshop or production. It is ideal for drilling work on medium to large workpieces. Technical data: Manufacturer: CSEPEL Type: RFH-100 / 3000 Drilling capacity: 100 mm Projection: approx. 3,000 mm Speed range: 18 – 1,800 rpm Spindle holder: MK6 Spindle stroke: approx. 400 mm Feed rate: 0.0375 – 2.0 mm/rev Connected load: 15 kW / 380 V Dimensions (L × W × H): approx. 4,400 × 1,600 × 4,200 mm Condition: technically perfect Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Technical data of the pallet rack stand: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P175 Profile dimensions: 100 x 75 x 2.50 mm Incl. cross and diagonal struts, and footplates The stands are pre-assembled (screwed truss) Height: 7,100 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible.

Net price: 16.800,- € Gross price: €19,992 - - - - - Iveco Emergency Power Generator 100 / 110 kVA - NEW - - - - - Engine: - Iveco (Italy) - Model: NEF45 - 4 cylinders - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Leroy & Somer (France) - 100 / 110 kVA - 230 / 400 volts - 50 Hertz - AVR regulator - - - - - Control / Start Unit: - Digital start unit - With automatic start function - Generator monitoring: volts, amps, hertz, kW - Engine monitoring - Hour meter - Maintenance timer - Integrated battery charging function - - - - - Other data: - Dimensions: 267 x 113 cm - Weight: 1390 kg - Tank capacity: 290 litres - Sound level: approx. 66 dB (7m) - Consumption: 12.5 l/h (50%) / 17.6 l/h (75%) - - - - - Other: - An integrated socket package (see pictures) can be ordered for an extra charge - - - - - Scope of de ...

Net price: 20.000,- € Gross price: €23,800 - - - - - Iveco Emergency Power Generator 100 kVA - NEW + + incl. 1000 litre large tank + + - - - - - Engine: - Iveco (Italy) - Model: NEF45 - 4 cylinders - Diesel - Water-cooled - 1500 rpm - - - - - Generator: - Leroy & Somer (France) or Linz (Italy) - 100 / 110 kVA - 230 / 400 volts - 50 Hertz - AVR regulator - - - - - Control / Start Unit: - Digital ComAp AMF25 Start Unit - With automatic start function - Generator monitoring: volts, amps, hertz, kW - Engine monitoring - Hour meter - Maintenance timer - Integrated battery charging function - - - - - Other data: - Dimensions: 267 x 113 cm - Weight: approx. 1570 kg (without large tank) - Tank volume: 1000 litres - Sound level: approx. 66 dB (7m) - Consumption: 11.3 l/h (50%) / 15.9 l/h (75%) - - - - - Other: - An integrated socke ...

Inv. Num. : 6169 Type: Motoman DX 100 Producer: YASKAWA Created: 2011 Parameters: Switch-on hours: 12800 h Operating hours: 6000 h Axle number: 6 Max. horizontal reach: 1717 mm Min. vertical reach: 3063 mm Maximum load: 20 kg

Exhibition machineThe Holzprofi dehumidifier HT-100 is ideal for drying wood, but the dehumidifier can also be used for drying basements, construction sites, etc. Advantages and features:- High drying performance even at low temperatures, thanks to hot gas defrosting- Good dehumidification even at low humidity- High efficiency for energy-saving operation- High-quality machine from the industrial sector, durable and suitable for many applications.- The practical control system switches the

Inv. Num. : 8914 Type: MA 1400 - DX 100 Producer: Yaskawa Created: 2012 Parameters: Maximum arm reach: 1434 mm Number of axles: 6 pieces Maximum load capacity: 3 kg Machine weight: 130 kg

A Pulsotronic metal detector for liquid and pasty products in pipeline systems is available. Pipe diameter: 100mm, max. operating pressure: 10bar, max. operating temperature: 80°C, version: EX. Machine dimensions X/Y/Z: 1250mm/550mm/700mm, weight: approx. 50kg. On site inspection is possible.

turning diameter over bed: 2150 mm turning diameter over slide rest: 1800 mm turning length: 10000 mm speed: 1 - 300 U/min faceplate diameter: 1800 mm spindle bore: 200 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m - 4-jaw face plate Ø 1800 mm - 2 Steady rest Ø 100 to 560 mm and Ø 1.3 to 1.8 m - 4-way toolpost - tailstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This lathe was manufactured in 2017. The DMG MORI WASINO G 100 | 300 features a maximum turning diameter of 285 mm and a standard diameter of 60 mm. It supports bar work up to 38.1 mm and offers rapid traverse rates of 12000 mm/min on the X-axis and 20000 mm/min on the Z-axis. With a spindle speed up to 6000 min⁻¹, this machine is ideal for efficient operations. For more information about this lathe, please reach out to us.

This Takamaz X-100 was manufactured in 2006. A robust horizontal turning machine featuring a max turning diameter of 203 mm, spindle speed up to 4500 rpm, and a chuck diameter of 153 mm. Weighing 2500 kg, it underwent a spindle and ball screws overhaul in 2021. If you are looking to get high quality turning capabilities consider the Takamaz X-100 machine we have for sale. Contact us for more information.

This 5-axis Mazak Integrex 100 IV ST was manufactured in 2011. It features a main spindle with a 6 hydraulic chuck, 4,000 rpm max speed, and 30 kW power. The second spindle matches these capabilities. Its milling spindle can reach up to 20,000 rpm. Includes a high-speed ATC with a 20-tool capacity, expandable to 120. Ideal for single-setup machining with its heavy-duty construction and MAZATROL MATRIX CNC control. Contact us for more information about this machine.

This 5-axis HEDELIUS RS 100 K MAGNUM was manufactured in 2009. It features a travel range of 3500 x 1000 x 770 mm and a rotary-tilting table with a 1200 kg max workpiece weight. The spindle operates at speeds up to 6000 rpm, and the machine includes a 50-tool capacity magazine. If you are looking to get high-quality milling capabilities, consider the HEDELIUS RS 100 K MAGNUM machine we have for sale. Contact us for more information.

This 3-axis EMCO FamUp MCP 100-50 vertical machining center was manufactured in 2007. It features a Siemens 840-D control system, a 2-fold pallet changer, and a 30-fold tool changer with holders. The machine includes a screw chip conveyor and a fully protected cabin with safety doors. Ideal for operations requiring a table load up to 600 kg and speeds up to 10,000 rpm. Reach out for further details regarding this vertical machining center.

General SKU251X209 MakePall TypeNiro 600/100 B40 o.D. No.2111 Year of construction2007 LocationBarneveld Pressure Working pressure6 Bar Main Features MaterialStainless steel Pressure6 Bar Surface6 m2 Specified Features - Filterpress Filter presscheck Stainless steel plates19x thickness 20/40 mm Internal platen sizes590x590 mm External platen sizes600x600 mm Central inletDN50 With outlets on platenscheck Hydraulic closingcheck MaterialStainless steel 1.4571 (316Ti) With jacketcheck General Mounted on wheelscheck Floorspace0,80x4,10 m Total height1,40 m Weight750 kg CEcheck Extra SpecificationsWith 19x9 mm stainless steel plates and 20/40 mm frames,18x25 mm antistatic Polypropylene chamber plates and 18x40mm frames,12x polypropylene chambers and 9 frames,Hydraulic unit, LP160, max operating pressure 700 bar, compression pressure 400 bar,&:nbsp:6 bar, allowable ...

This 5-axis DMG DMC 100 H was manufactured in 2005. It features a Siemens 840D powerline control with Shopmill, a 1,000 mm travel in X, Y, and Z axes, and a speed range up to 8,000 rpm. The machine includes a HSK 100 tool holder, 270/360 tool positions, and two 800 x 800 mm pallets. Consider the opportunity to buy this DMG DMC 100 H horizontal machining centre. Contact us for more information.

Folding box cartoning machine Uhlmann C 100 LA • Format range folding box W 30-100, H 15-75, L 70-200 mm • Output 15-100 folding cartons/min • For offset buckle on both sides • Product feed for blister via blister stacking chute • Code reading Laetus Argus for 2x brochure code (front + back), 1x folding box code, 1x brochure presence in folding box • Brochure folding and inserting machine from the GUK FA 21/4 Cartonac 91 magazine • Colour embossing station for folding flap opposite the insertion side, 2 lines, with embossing numbers • Poor ejection with ejection counter-control • Vacuum generators • PLC Eberle PLS 514 • Connection 400V/50Hz Optional: - New hardware/software Mitsubishi with 8" color touch panel - Code Reader Cognex Camera Reader System - Validation documentation - Hot melt machine

greates pass round over bed: 1050 mm dist. between centers: 6000 mm centre height: 520 mm turning length: 4810 mm workpiece weight max. (main spindle): 6000 kg Maximum workpiece weight with steady rests: 8000 kg max. torque on the spindle: 12500 Nm number of spindle speeds: 2,8-560 1/min Speed range 24 levels: feed per revolution: 0,08-56 mm chuck diameter: 630 mm Maximum travel distance of the longitudinal slide: 4810 mm Maximum travel distance of the cross slide (suppor: 530 mm Maximum travel distance of the tool slide (support: 340 mm Tailstock quill diameter: 150 mm total power requirement: 31 kVA weight of the machine ca.: 10500 kg dimensions of the machine ca.: 7860 x 1970 x 1480 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis DMG DMC 100 H was manufactured in 2006. It features a Siemens 840D powerline control with Shopmill, and robust traverse paths of 1000 mm in X, Y, and Z axes. Equipped with a high-speed range up to 8000 rpm, dual gear stages, and an HSK 100 tool holder with up to 360 positions. Includes two 800x800 mm pallets and a B-axis at 0.001° precision. Contact us for more information about this machine.

pressure: 100 t stroke: 380 mm table surface area: 1100x424 mm dayligth: 180/750 mm distance between columns: 1100 mm diameter of piston: 90 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 6-axis KUKA KR 100-2 HA 2000 was manufactured in 2007. It features a TRUMPF TruDisk 6002 laser with a power range of 120–6000 W and a wavelength of 1030 nm. The robot arm is mounted on a KSL-2000/2700 linear axis, enhancing its operational flexibility. If you are looking to get high-quality welding capabilities, consider the KUKA KR 100-2 HA 2000 machine we have for sale. Contact us for more information about this machine.

General SKU446W1483 LocationBarneveld CEcheck Main Features Motor0.75 KW Inlet diameter10 mm Specified Features - Jet Mill Grinding room sizeDia. 100x16mm InletDia. 10 mm Motor0,75 kW, 230/400 volt, 1400 rpm, (Ex) With variable speed drivecheck Speed18/59/147 rpm Jet Mills MaterialStainless steel 1.4306 (304L) Information MakeMicro-Macinazione SA TypeLU 100 IR BD Number0106100.1046.2070 Year of construction2006 Mounted on wheelscheck With switchcheck Floor space0,80 x 1,40 m Total height2,15 m Weight490 kgJet MillsMicromacinazioneMills > Jet MillsBrand > Micromacinazione What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This Sahinler HKP-Z 100 was manufactured in 2016. A robust C-frame PLC controlled deep drawing press, it features a pressure force of 1000 kN and a stroke of 500 mm. The machine includes a large table size of 900x600 mm and a throat depth of 300 mm, suitable for diverse punching and bending tasks. Consider the opportunity to buy this Sahinler HKP-Z 100 punching and bending machine. Contact us for more information about this machine.

Mechanical hole punch with a punching force of 1000 kN. Tool holder for punches up to 90 mm can be mounted on request. A large assortment of stamps and dies is included in the scope of delivery.

This 6-axis NAKAMURA WT-100 was manufactured in 2019 and features dual spindles with a speed of 6,000 rpm and a motor power of 11/7.5 kW each. It boasts a bar capacity of Ø42 mm and a maximum turning diameter of Ø190 mm. The machine includes a dodecagonal drum turret with 24 indexing positions and rapid traverse rates up to 40 m/min. If you are looking to get high-quality turning capabilities, consider the NAKAMURA WT-100 machine we have for sale. Contact us for more information.

This 5-axis DECKEL MAHO DMC 100 T was manufactured in 2003. It features X, Y, Z travels of 1,180 mm, 710 mm, and 710 mm respectively, a SK40 tool magazine with 32 positions, internal coolant supply, and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMC 100 T vertical machining centre. Contact us for more information about this machine.

General SKU212T481 MakeOchsner TypeCNY 100-340 Mach.No.49065 Main Features MaterialStainless steel Volume32000 Ltr. Motor12.5 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity32 m³/h With motor11/12,5 kW 380-420/440-480 Volt (ABB: type: MBT 160M) InletDN100 OutletDN65 With jacketcheck Centrifugal Pumps MaterialStainless steel General Mounted on framecheck LocationBarneveld Floorspace1,5x0,65 m Total height0,6 m Weight600 kgCentrifugal PumpsOchsnerPumps > Centrifugal PumpsBrand > Ochsner What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU412X1247 LocationBarneveld MakeCF Scheer &: CIE TypeSGS 100-E Main Features Motor3 KW Width950 mm Specified Features - Pelletiser Pelletisercheck Rotor width100 mm Rotor diameter80 mm, 200 mm Number of rotor knives1 With roll feedingcheck Motor3 kW 220—240 380—420 V 1420 rpm Rotor speed0—1430 rpm With jacketcheck General No.21058787/8 Year of construction1992 Floorspace1,2 x 1 m Total height1,5 m Weight340 kgPelletisersScheer & CieMills > PelletisersBrand > Scheer & Cie What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This Warcom DINAMICA 100.30 press brake was manufactured in 2016. It features a maximum force of 100 Ton, a working length of 3200 mm, and a motor power of 11 kW. Weighing 10,500 kg, it operates with a maximum working pressure of 250 bar. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 100.30 machine we have for sale. Contact us for more information about this machine.

This cable peeler is an immediately available used machine. It is workshop-tested and equipped with new knives. The Maxi 100 is an enormously versatile cable slitting machine with vertical cutting blades. No matter how thick or thin the insulation is, the cables are peeled to a tenth of a millimeter. Due to the strong interlocking, the cables do not slip, but are transported reliably. Damaged or thinner or thicker areas in the wiring harness are also well transported by the spring-mounted pull wheels. Blunt knives can be easily and inexpensively resharpened with a standard grinder. The Maxi 100 is suitable for practically any cable. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info

This 3-axis Flow MACH 100-4020 was manufactured in 2021, featuring a cutting area of 4020 × 2020 mm and a cantilever structure. It includes a FlowMaster® license, Flow PASER® 4 cutting head, and a Hyplex Prime 30 pump with a maximum pressure of 4,150 bar. Ideal for abrasive waterjet cutting with less than 800 operating hours. If you are looking to get high-quality cutting capabilities, consider the Flow MACH 100-4020 machine we have for sale. Contact us for more information.

From the Gütersloh site, we offer a well-preserved eccentric press Pressure 100 t Projection 330 mm Stroke 10-130 mm Stroke rate 56 stroke/min Plunger adjustment 80 mm Table surface 830x600 mm Plunger area 250x130 mm Table height 870 mm Peg hole in plunger 50 mm Machine weight approx. 11 t Space requirement approx. WxDxH 2100x1900x3000 mm

Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible.

BILLION HERCULE 100 T Reference: H260/100 Condition: Very good Technical Specifications: Clamping force: 100 T / 1000 KN Tie bar spacing: 445 x 445 mm Platen dimensions: 630 x 630 mm Mold thickness (Min/Max): 180- 400 mm Opening stroke: 380 mm Injection volume: 139 cm³ Injection pressure: 1843 bar Screw diameter: 35 mm L/D ratio: 20 Dimensions & Weight: Weight: 5 100 kg

A vertical carousel storage system (office lift) Hänel with front access is available. Trays: 18, tray arrangement: 4-lane, max. stack load per tray: 132kg, machine dimensions X/Y/Z: approx. 3300mm/1000mm/2850mm, weight: approx. 3000kg, control: MP0A. Documentation available. An on-site inspection is possible.