129,491 used machines on RESALE, but how to find them? Machine Search
Flat Conveyor Belt FK 100 Width: 300 mm Length 2500 mm
Briquette Press Spänex Briquetting press Type SHB 100 K2 Year of construction: 2011 Pressing capacity 100 kg/h depending on material Flow rate 0.7 m³/h depending on material Briquette shape octagonal 127 mm x 72 mm Hydraulic motor 7.5 kW PLC Program Shb60-125 Chip container size 1500 mm x 1500 mm x height 600 Chip container with agitator and feed screw With level monitor Temperature monitoring Operating hours according to the counter Hydraulic pump 1407 h Duration 142 h Filling cylinder 455 h Press cylinder 1050 h With cyclone Weight of the press 570 kg Almost all shredded materials can be briquetted with a residual moisture between 6% and 18% without binder. e.g.: wood shavings, milling and sawdust, dust, paper, cotton flaky, coconut, wheat straw, hemp, hay, flax, plant stems, malt germs, ... The maximum chip size should not exceed 20 x 1 mm. Briquettes ...
ALDURO Combination Belt Grinder BS-100+ Specifications: Motor voltage 400 volts Motor power 0.7 kW Sanding belt size 100x1000 mm Grinding wheel dimension DxWxID 200x25x20 mm Speed 2850 min- Sanding belt speed 15 m/sec. Dimensions WxDxH 550x310x580 mm Weight approx. 29 kg Connection suction Ø 36 mm Shaft extension Buffing disc Grinding wheel Abrasive belt
used
Offer 24315 Univ. Radii Metal Belt Grinding Machine Specifications: - Sanding belt dimensions 2000 x 100 mm - Surface grinding opening 400 x 100 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment via handwheels - Sanding belt speed 30 m/sec. - Contact disc / grinding roller Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - 10 contact - sanding rollers approx. Ø 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm
Offer 24339 Specifications: - Sanding belt dimensions 2000 x 100 mm - Surface grinding opening 400 x 100 mm - Support vise – angle adjustable 90° - 30° - Support fine adjustment by hand lever - Sanding belt speed 30 m/sec. - Contact disc / grinding roller for approx. Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - Contact rollers 33.7 , 42 , 48 mm
Stop for lathe support, longitudinal stop, lathe, support stop -Recording dimensions: see photos -Clamping height: 22 mm -Support length: 100 mm -Quantity: 1x holder available -Dimensions: 150/50/H95 mm -Weight: 2.6 kg
Fermentolevain Fermento Plant for the preparation and preservation of liquid sourdough with Dual Care system for the best flavors Control of the fermentation phase and preservation phase with built-in cooling easy-touch control Mixing time and speed adjustable Stainless steel Stirring tool removable with overflow probe and alarm buzzer Outlet height 440 mm 2 agitators, double flap Floor and side scrapers for high quality Tank capacity 100/125 kg Built-in frame heater and add-on cooling coil Cooling capacity per hour approx. 6°C falling Connection 400V / 50Hz / 2.1kW, 16A-CEE plug Dimensions: 820 x 1050 x 1690 mm, WxDxH New machine with 12 months warranty Optional: Built-in scale Water connection with hand shower Cleaning Cycle Maintenance contract Service Package Many more bakery machines in stock!
Capacity: 1.100 Ltr. Operating pressure: 5.0 bar, with technical documentation Year of Make: 1987 Manuf.: Binder, Crailsheim Material: stainless steel, 1.4301 Design: Cylindrical sthd, on 3 feet, outlet with disc valve DN 32, pulled down cleaning line with spray head and pressure fitting, sample tap, disc valves DN 32, manhole cover last use: beer Height approx. 2,280 mm (with cleaning line) Diameter: approx. 900 mm Prices plus VAT. VAT, from our warehouse, free truck loading!
Marking prism, test prism, prism, angle prism, mounting angle, mounting prism, mounting cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 46 mm -Dimensions: see photo technical drawing -Dimensions: 100/60/H49 mm -Weight: 1.7 kg
Baumkuchen Maschine BK 100 with ALU roller 1000 mm working width 900 mm roller width Immersion tub Swivel arm limiter Natural Gas Heating / 12000 Kcal/h Base with shelf 220V drive adjustable Dimensions: 1450 x 700 x 1500 mm, WxDxH Used device cleaned with 3 months warranty We have a wide range of bakery equipment!
Granulator Manufacturer: Retsch Type SM 100 The Retsch type SM 100 granulator is a versatile laboratory device designed for the efficient shredding of various materials. This type of grinder is particularly suitable for the preparation of samples in the chemical and pharmaceutical industries, materials research, and the food industry. Key features of the Retsch SM 100: 1. Grinding principle: The granulator works on the principle of cutting crushing. Thanks to the integrated blades made of high-quality stainless steel, precise and even shredding is achieved. 2. Application: The SM 100 is ideal for shredding soft to medium-hard materials, such as plastic, paper, food and many other organic and inorganic substances.
Capacity: 3.100 Ltr. Operating pressure: 4.5 bar, with test book Year of Make: 1976 Manuf.: Wabag Material: Stainless Steel, 1.4571, V4A Design: Cylindrical sthd, on 3 feet, spout with ball valve DN 25, lateral weld-on nozzle DN 65, various connections inch threads, manhole cover, slight adhesions inside and outside last use: water Height approx. 3,300 mm (with cleaning line) Diameter: approx. 1,150 mm
Labeler Manufacturer ADE Type PA-100-40-T The ADE labeller for Bollini is a technical solution specially designed for the fast and accurate labelling of bottles, cans and other packaging. Ideal for the food and beverage industry, this device helps to optimize work processes and increase efficiency in production. Features of the ADE labeler: 1. High speed: The ADE labeler can apply an impressive number of labels per minute, which speeds up the production line and reduces waiting times. 2. Precision: Thanks to modern technology, the labeler ensures accurate label placement, which ensures an attractive presentation of products and improves recognition. 3. Easy to use: The user interface is intuitively designed, so even new employees can quickly learn how to operate the device and make adjustments. 4. Versatile Application: The labeler is flexible in use and can be adapted to differ ...
The facility is an exhibition facility or test facility in an absolutely new condition. The plant was built in 2024 for the filtration of cooling lubricants in tool grinding: oil + carbide. Filtration is carried out with the help of 61 filter cartridges located in a cylinder housing. The dirty oil is pressed through the filter surface and runs through the inside of the filter into the clean container. The filter works in fully automatic mode. The filter pressure is monitored during the filtration process and as soon as the filter cake has been formed and the pressure increases, the filter is backwashed with compressed air. Then the filtration process starts all over again. The filtration system can be directly connected to the grinding machine, lapping machine, honing machine, etc. Filtration is carried out without consumables, as the filter is backwashed (filter flow, etc.). Th ...
Key data: 78 KW, 97 kVA, 400 V
Diesel Emergency Power Generator 100kVA, 4 Cylinder EU StageV Engine: Deutz TCD4.1L4 Generator: Stamford UCI274C Frequency: 50Hz Voltage: 400/230V Tank: 188l Power PRP (kVA / kW) 97/78 Power ESP (kVA / kW) 107/86 Noise Level Lp(A) (dB(A)@7m): 67 Sound power-LW(A) (dB(A)): 95 Control: DSE 7420 MKII Fuel filler neck with key Tropical-proof cooler for operation at 50 ºC. Prepared for maintenance intervals every 500 hours Emergency stop button Differential protection Central stop eye Access door to the radiator
pressure: 100 t throat: 315 mm stroke: 8 - 112 mm table surface area: 725 x 570 mm ram surface: 410 x 315 mm ram adjustment: 80 mm no. of strokes: 55 / 82 Hub/min tool shank hole (depth x diameter): 85 x 50 mm dayligth: 355 mm total power requirement: 7,5 kW weight of the machine ca.: 6 t dimensions of machine L x W x H: 2,00 x 1,00 x 2,87 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
NAKAMURA TOME WT-100 CNC Tower TECHNICAL FEATURES: Year: 2012 NC Type: FANUC 31i-B Distance between spindles: 735 [mm] Maximum diameter Turning time: 190 [mm] Maximum length Machinable: 503 [mm] Y-axis travel: -31 / +31 [mm] Z1 axis stroke: 503 [mm] X1 axis stroke: 135 [mm] Z2 axle stroke: 503 [mm] X2 axle stroke: 135 [mm] X1 Axis Fast Forward Speed: 16000 [mm/min] X2 Axis Fast Feed Speed: 16000 [mm/min] Z1 axis fast feed speed: 40000 [mm/min] Z2 axis fast feed speed: 40000 [mm/min] Y-axis fast feed speed: 6000 [mm/min] Spindle Nose: A2-5" Maximum diameter in bar turning spindle: 42 [mm] Spindle Bore: 56 [mm] Maximum speed Spindle: 6000 [rpm] C-axis indexing accuracy: 0.001 [°] Spindle power: 11 [kW] Spindle torque: 75.4 [Nm] Counter Spindle Nose: A2-5" Counter-spindle bore diameter: 56 [mm] Counter-spindle stroke: 525 [mm] Maximum speed Spindle: 6000 [rpm ...
material width: 100 mm material thickness: 1 mm cross cut: ? total power requirement: 0,75 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m Sheet Cutting Machine Workspace: 100 x 1 Drive: 0,75 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
; Gross weight [kg]: 7408; Engine: Perkins 4008-TAG2A; Accessories: Battery, Control Panel, Including : coolant heater and battery charger
; Gross weight [kg]: 8250; Engine: Cummins KTA38-G5; Accessories: Battery, Control Panel, Including : coolant heater and battery charger
Cooling system: Heat exchanger cooled; Gross weight [kg]: 1130; Engine: Cummins 6BT5.9-GM83; Accessories: Battery, Control Panel, Including: Coolant heater and battery charger
; Gross weight [kg]: 8380; Engine: KTA38-G14; Accessories: Battery, Control Panel, Including : coolant heater and battery charger
Automatic Transfer Switch - ATS Panel - ATI Panel, 1.600 Ampere - Applicable for generators up to 1.100kVA; Gross weight [kg]: 215
; Gross weight [kg]: 385
COLCHESTER TORNADO 100 CNC turning center built in 1995 in England is used for precision machining of workpieces with a maximum diameter of 420 mm. The machine features a large, fully illuminated workspace with a 12-position turret and an extremely powerful spindle. The 60° inclined bed ensures remarkable process stability, even during the most intense challenges. This is completed by the intuitive CNC control in which all machining programmes are created in just a few steps. The TORNADO 100 CNC lathe weighs 2400 kg. Technical specifications of the COLCHESTER TORNADO 100 metal lathe - CNC controller - HMI panel: VILUX - feed in the X/Z axis: 180/350 mm - rapid traverse in the X/Z axis: 10/15 m/min - turning diameter over bed: 420 mm - turning diameter over slide: 297 mm - maximum turning diameter: 186 mm - maximum turning length: 350 mm - maximum spindle rotational speed: 60 ...
We offer you a sand classifier / sand separator from MEVA. - Type: SKS 100 E - Year of construction: 2003 - Integrated ventilation
Machine Name: High Pressure Pump Used Manufacturer: Uraca Type: RS708E/100 Year of Make: 1997 Degree of protection: IP 55 Speed: 556 rpm Operating voltage: 400 / 690 V Flanges: DN 80 Frequency: 50 Hz. Delivery pressure: 100 bar Material: Steel Drive motor: 45 kW Flow rate: 237 L/min. Dimensions: L 1700 x W 700 x H 850 mm Curb weight: Weight 1500 kg Technical documentation: No Condition: Used Price: On request
Machine type: Vacuum dough divider Model: VD 100-700 The dough dividing machine is the latest system of dough processing technology Cut the dough to the required weight without pressing and damaging it All surfaces that come in contact with the test are made of stainless steel Weight range: from 100gr to 700gr Capacity: 1800 - 2400 pieces per hour Dimensions: 1370/1780 x 650 x 1600 mm Weight: 420kg Electrical power: 1.75kW
Number of spindles: 6 St. Working width: 230 mm Working height: 160 mm Length of the planing table: 1050 mm Feed motor: 7 kW Feed speed: 6-40 m/min. Weinig Powermat 1200 ---------------------------------------------------------------------- - with infeed automation Weinig wheel magazine EM 100 and linked with outfeed automation Weinig High-Mech A 1 The machine will be completely checked in our warehouse before delivery! Detailed description: ---------------------------------------------------------------------- - 1. Weinig planer and moulder Powermat 1200 ---------------------------------------------------------------------- - Technical data: ------------------------ Working width 20 - 230 mm (with tool flight circle 93 - 163 mm) Working height 10 - 160 mm (with tool flight circle 93 - 163 mm) 1. Spindle ----------------------------- First lower horizontal spindle Motor with brake 7.5 KW ...
workpiece length - max.: 3000 mm feed length: - mm length: - mm power capacity: 2 kW Weight: 1300 kg With control panel HBG 10 A guide channel, size of approx. 60 mm diameter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
; Gross weight [kg]: 10083; Engine: Caterpillar C32; Accessories: Tanker, Battery, Control Panel, Stahldach, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 1000
KHS filling machine for bottles with crown cork capper – model SFV Manufacturer: KHS Model: SFV Filling Machine with Crown Capper Filling valves: 100 Capping points: 18 Capacity: Up to 50,000 bottles per hour (0.5 l bottle, depending on the product) Running Direction: Right – Left This KHS bottle filling machine, equipped with a crown cork capper, offers an output of up to 50,000 bottles per hour. It is ideal for filling CO2-containing beverages such as beer and soft drinks. The current condition of the machine is very good – it has been regularly serviced and has numerous additional equipment. Sizes: • Equipped for 0.33 l longneck bottles and 0.33 l Steinie bottles. • Additional bottle formats can be set up as an option. The machine is available at short notice. With 100 filling valves and 18 capping points, this bottle filling machine is ideal for large production ...
Klöckner-Moeller Track System BD O-100 A Klöckner-Moeller Busbar system BD O-100 A 500 V Track 160 cm 120 pieces 192 meters More items - new and used - can be found in our shop! International shipping costs on request!
KHS filling machine for bottles with crown cork capper – model SFV Manufacturer: KHS Model: SFV Filling Machine with Crown Capper Filling valves: 100 Capping points: 18 Capacity: Up to 50,000 bottles per hour (0.5 l bottle, depending on the product) Running direction: left - right This KHS bottle filling machine, equipped with a crown cork capper, offers an output of up to 50,000 bottles per hour. It is ideal for filling CO2-containing beverages such as beer and soft drinks. The current condition of the machine is very good – it has been regularly serviced and has numerous additional equipment. Sizes: • Equipped for 0.33 l longneck bottles and 0.33 l Steinie bottles. • Additional bottle formats can be set up as an option. The machine is available at short notice. With 100 filling valves and 18 capping points, this bottle filling machine is ideal for large production vo ...
Working width: 630 mm Working height: 3 - 250 mm Motor output: 7,5 kW Feed speed: 7 und 14 m/min. Dimensions (length / width): 2700 x 1700 mm weight: ca. 1.450 kg Dust suction hood: 2 x 160 mm COMBINED PLANNING AND THICKNESSING MACHINE 546|100 Manufacturer description Solid German mechanical engineering Convenient planing and thicknessing without machine conversion, dimensionally stable and precise dressing tables, as there is a folding up omitted, for planing widths up to 630 mm and dual operation up to 315 mm each PANHANS solid steel cutter block with 4 Tersa reversible knives SURFACE PLANE: Table length 2555 mm, planed with toothed table lips Electromotive adjustment of the feed table via button with digital display the chip removal max. 5 mm Dressing fence can be inclined up to 45°, in an extremely smooth-running steel guide stored Dressing ruler, anodised, with swiveling auxiliary ...
Sammelhefter / Saddle Stitcher Heidelberg ST 100.1 Year 1999 8 Anleger DVA (4x Doppelanleger) / 8 Feeder DVA (4x double feeder) 1 Umschlagfalzanleger UFA / 1 cover feeder UFA Heftstation / Stitching unit Heidelberg 100.1 Dreischneider / Three Knife Trimmer Bandauslage / Band Delivery Inkl. Kompressor / Include Compressor 2x Hohner Heftköpfe / 2x Hohner Stitching heads Format min.(unbeschnitten) / Size min.(uncutt) 89 x 120mm Format min.(unbeschnitten) / Size min.(uncutt) 305 x 349mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
used
OKS Stationary Air Pressure Vessel Galvanized 1 piece 2000 liters 1 piece 1000 liters Test pressure 16 bar, operating pressure max. 11 bar at call Tel. 01715213204
Horizontale Trennsäge / Horizontal Band Saw Jllig TS 100 V Baujahr / Year 1973 - Serial-No. 959 Arbeitsbreite / Working width max. 590mm Ersatz Sägeblatt / Spare Saw band Stufenlose Höhenverstellung des Sägebandes / stepless height adjustment of saw band Stufenlos regelbarer Antrieb / stepless adjustment drive Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
Neue Nummerierwerke - New Numbering units Zeisser 100/200 ZAV Some Numbering heads ZEISSER - NEW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
BÜHLER MWSB-100 dosing screw conveyor for weighing 100 mm diameter, length 2.75 m Engine 0.75 kw, rpm 107 Thread in the inlet progressive, inlet ø 390 mm, Outlet ø150 mm with pneumatic outlet Very good condition
Key data: 80 KW, 100 kVA
We currently offer: Number 6 Perkins generator set Type: M127 Generator Stamford Power 100 KVA / 80 KW Hz 50 RPM 1500 IP 22 dB 96 Connection 12A, 16A, 32A Hours: 7348 Metrics: L: 3.55m H: 1.85m W: 1.15m You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
We currently offer: Number 10 Perkins generator set Model: G72S Generator Stamford Type: UC274C Power 100 KVA Operating hours 8.5 dB 89 Metrics: L: 3.65m H: 1.55m W: 1.10m Weight: approx. 1500 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
This 8-axis AMADA HFBO 100-30 press brake was manufactured in 1998. It features a maximum press force of 1000 kN and a bending length of 3100 mm, providing robust capabilities for various applications. The machine has undergone software upgrades and cylinder replacements in 2024. If you are looking to get high-quality bending capabilities, consider the AMADA HFBO 100-30 press brake we have for sale. Contact us for further details.
Inv. Num. : 8043 Type: ML 100 3Z Producer: NS MAQUINAS Created: 2017 Parameters: Max. workpiece diameter: 10-114 mm Minimum length of the workpiece: 335 mm Number of sanding belts: 6 pieces Abrasive belt speed: 10-30 m/s Sanding belt dimensions: 50 x 940 mm Weight: 600 kg
- Spindle speed:50 - 7 100 [rpm] - 6 spindle feeds:0.03 - 0.4 [mm/t] - Spindle stroke:210 [mm] - X-axis machining row:850 / 1 000 [mm] - Y axis machining series:465 [mm] - Z axis machining series:750 [mm] - Tension dimension on table:1 570 x 500 [mm] - T Groove:7 - Groove centre distance:50 [mm] - Width of groove:12H8 - Positioning precision:0.01 [mm] - Repetition Precision:0.005 [mm] - maxi part weight:250 [kg] - Drive power:5 [KW] - Steel Bore Capacity: 30 [mm] - Steel Internal Tapping Capacity: M 20 - Cast Iron Internal Tapping Capacity: M 24
maximum number of results exceeded
please refine your search
