hp 100 used for sale

number of feeders: 4 max. speed: 9000 /h max. paper size: 31,1 x 35,5 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power converter, power supply, power pack, switching power supply, power supply, switching power supply, power supply -Manufacturer: Balluff, power supply switching power supply -Type: BAE0002 BAE PS-XA-1W-24-100-004 -technical data: see type plates photos -Dimensions: 120/85/H130 mm -Weight: 1.4 kg

Turntable Bausch + Ströbele further information on request

Micrometer screws, micrometer screws, outside micrometers, outside micrometers -Micrometer: outside micrometer -Measuring range: 100-125 mm -Reading: 0.01 mm -locking device -other sizes: also available -Case dimensions: 315/160/H30 mm -Weight: 1.0 kg

Rheon Model KN100 Cornucopia Encruster. Maximum speed approx. 60 pieces per minute, depending on the product. Weight capacity from 10 - 90 grams. (2) 11.5" x 8" x 7" stainless steel feed hoppers, each with (2) 2.5" diameter feed screws. Approx. 5 inches wide discharge conveyor. Digital touch controls. Compact forming, filling and portioning machine Connection 400V, 16A-CEE plug Used machine from bakery

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 22 mm / 90° -Dimensions: see photo technical drawing -Dimensions: 100/25/H21 mm -Weight: 0.3 kg

Airless sprayer, painting device, spray pack, paint sprayer, paint spray system -Manufacturer: Wagner, paint sprayer paint spray system -Type: W 100 -Use: for varnishes and glazes -Area performance: 5 m² / 12 min -Dimensions box: 300/140/H260 mm -Weight: 1.5 kg

100 ton x 3000mm with ANTIL Robot

Servo drives from Indramat KDS 1.1-100-300-W1

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: blank, Ø 925 x 9 mm -Inside: Ø: 100 mm -Hole circle: Ø 250/200 x 30 mm -Number of teeth: see photo -Weight: 26 kg

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: Ø 860 x 5 mm -Inside: Ø: 100 mm -Hole circle: Ø 250/200 x 30 mm -Number of teeth: see photo -Weight: 22 kg

Indramat Power Supply-----Power supply Type CO 1.3-100-220

saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: blank Ø 805 x 5 mm -Inside: Ø: 100 mm -Hole circle: Ø 200 x 30 mm / Ø 160 x 27 mm -Number of teeth: see photo -Weight: 18 kg

Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Paslode, strip nails paper bound 3 boxes -Type: 3.4 x 100 Smooth Bright -Art.No.: 090082 -Price/Delivery: complete -Transport dimensions: 300/260/H340 mm -Total weight: 47.1 kg

Fabr: Kuper Type: FW Machine No: 0371 Year: 1966 Stand projection: 1150 mm Throughput speed: approx. 10 - 30 m min. Propulsion: Brake motor 0.55 kW 380 V, optionally 220 V three-phase current Total connected load: 1.8 kW Heating: 7 V 120 W Weight: 630 kg Space requirement: 2300 / 800 mm Crate dimensions: 2450 / 1450 / 900 mm Ship space: 3.2 m³

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 100 mm -Piston rod: Ø 37 mm -Holes: Ø 25 mm / Distance: retracted 365 mm / 360 mm -Number: 2x cylinders available -Price: per piece -Dimensions: Ø 82 x 440 mm -Weight: 7.7 kg / 7.8 kg

Universal Tool Milling Machine Make: MAHO Model: MH 1000 2x available! x-travel 1000 mm Tool holder SK 40 Digital. Head swivel +/- . Table tilt and swivel +/- . Quill stroke . - 3-axis digital display - Universal table 1,250 x 740 mm (T-slot 16 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - 6 autom. Quill feeds 0.02/0.03/0.05/0.08/0.12/0.20 mm/rpm - Central lubrication, manually operated The machine is open to the public. Ready for immediate use Free loading, transport no problem. Financing possible at favourable conditions! If you have any questions, just write or call. Technical specifications are non-binding. Errors excepted.

Key data: 3100 mm, 2700 mm, 2300 mm

Hydraulic press brake - conventional including paternoster system for uncomplicated tool change with 25 hangers. for export NC Press Brake Heut Lotze Type: PZ 100 - 25 Built in 1973 Pressure 100 t Bending length 2500 mm Stand width 2100 mm Weight approx.: 11.000 kg, Dimensions (LxWxH) approx.: 3,100 x 2,300 x 2,700 mm -------------------------- Paternostar system Schwab Maschinenbau Type: SIB 430/340 Built in 1982 Number of compartments 25 max. shelf load 150 Dpa max. device payload 3750 Press brake and paternoster can be purchased separately Maschinenhandel Nord new & used machines for industry, trade and commerce Import/Export Service & Advice Also take a look at our Other Ads. Many more drills available Or visit our more than 1000m² exhibition hall with new and used industrial and manufacturing machines, not far from the A20 motorway!

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 100 mm -Piston rod: Ø 25 mm -Holes: Ø 25 mm / Distance: retracted 355 mm -Dimensions: Ø 77 x 420 mm -Weight: 6.9 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 100 mm -Type: DZ25L38/100 GEHV -Piston rod: Ø 25 mm -Holes: Ø 20 mm / Distance: retracted 277 mm -Dimensions: 340/60/H100 mm -Weight: 4.5 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 100 mm -Type: unfortunately without type designation -Piston rod: Ø 16 mm -Holes: Ø 10 mm / Distance: retracted 220 mm -Dimensions: Ø 35 x 248 mm -Weight: 1.3 kg

Used glass lined reactor with capacity 100 L. Manufacturer DeDietrich. Year of manufacturing 1986. Technical parameters: 1. Working pressure: - tank -1/6 - jacket -1/6 2. Working temperature: - tank -25/+250 - jacket -25/+250 3. Capacity: - 105 L tank - jacket 24 L

Technical details: - Table length: 520 mm - Table width: 420 mm - Table width with mounted extension: 600 mm - Table height: 875 mm - Max. diameter of the table opening: 160 mm - Spindle diameter: 30 mm - Max. diameter of the milling tool: 150 mm - Spindle speeds: 4,000 / 6,000 / 7,500 rpm - Height adjustment of the spindle: 12 cm - Height of the milling fence: 125 mm - Diameter of suction nozzle: 100 mm - with pressure device - with 1 x milling tool (diameter 95 mm) Engine data: - Voltage: 400 V - Current: 4.0 A - Frequency: 50 Hz - Power: 1.8 kW - Speed: 2,800 rpm Dimensions (LxW): 600 x 420 mm Transport dimensions (LxWxH): 800 x 600 x 1,300 mm The machine has been completely cleaned in our company and checked for correct functioning. It is supplied with a mounted connection cable with a 16A plug (integrated phase changer). (Subject to changes and error ...

Pneumotec Workpiece Accumulator PWS 100 Year of construction: 06/2013 Plate diameter 220 mm Number of plates: 20 pieces Height 1200 mm +/-100 mm adjustable Width 780mm Length 3150mm

Knurled screw handwheel -Knurled screw: handwheel -Length: 100 to 163 mm -Thread: trapezoidal thread see photos -Dimensions: Ø 72 x 100 mm -Weight: 2.7 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: ABW, live center -Type: ZNB 204 -Recording: MK4 -Dimensions: Ø 100 x 215 mm -Weight: 3.5 kg

Steel holder, clamping plate with T-slot, wedge holder -Steel holder: wedge holder -Shot size: 50 - 60 x 23 x 100 mm -Dimensions: 175/165/H215 mm -Weight: 12.3 kg

Fan filter, fan row, air cooler, control cabinet fan, filter fan -Manufacturer: Rittal, filter fan type SK 3239.100 -Fan: 230 V 19 W -Dimensions: 205/205/H110 mm -Weight: 0.9 kg

Inv. Num. : 7474 Type: TPX 100 Producer: Teca-Print Created: 2006 Parameters: Vertical stroke: 100 mm Capacity: 1800 cycl./h Machine dimensions: 380 x 762 x 560 mm Weight: 30 kg Components of the offer: Base MS250 Cross Table KT30 Swab Feed

Thank you for your interest in our used machines, which we are able to offer you as follows: Manufacturer: Sollich Model: 100F Chocolate Tempering Machine "Mini Temper" Year of construction: 1992 Masch. Nr.: 2241 Capacity: up to 80 kg/h Miscellaneous: good condition Chiller New in 2023 With the 100 F, you can keep 25 kg of couverture at a constant temperature and process it ideally pre-crystallized for several hours, or produce up to 80 kg of pre-crystallized couverture per hour. We offer this machine for sale "as is". from Hess warehouse. Lichtenau, unpackaged

100 ton x 3000mm 8 Axis

Micrometer screws, micrometer screws, outside micrometers -Micrometer: outside micrometer -Measuring range: 100-125 mm -Reading: 0.01 mm -Locking device -other sizes: also available -Case dimensions: 320/180/H40 mm -Weight: 0.9 kg

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck holder MK4 -Chuck size: Ø 100 mm -Passage: Ø 20 mm -Dimensions: Ø 100 x 200 mm -Weight: 3.8 kg

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: with T-slot, solid design -Groove width: 14 mm -Dimensions: see photos / technical drawing -Dimensions: 210/100/H105 mm -Weight: 7.7 kg

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Revolving center: Mounting: MK4 -Type: unfortunately without type designation -Centering tip: Ø 100 mm -Dimensions: Ø 100 x 230 mm -Weight: 5.2 kg

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers -Machine transport roller: armored roller -Load capacity: kg -Dimensions: 210/100/H65 mm -Weight: 5 kg -only 1 piece available

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1195 mm -Cross-section: 100 x 45 mm -Recording: see photos -Transport dimensions: 1370/610/H100 mm -Total weight: 112 kg

KSB ETANORM D225 standard water pump, Q 150 m3/h, H 102 m, v1.0 mm2/s, Siemens 3

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WELDING CELL IS COMPLETE REFRUBRISHED, READY TO WORK EQUIPPED WITH ROBOT MOTOMAN WITH CONTROL NX-100 CMT FRONIUS 4000 WITH RCU 5000 CONTRIOL AUTOMATIC CLEANING SYSTEM FOR GUN POSITIONER TWO SIDE ROTATING-SIMULTANEOUS WELDING ON ROTATION FOR CUSTOMER WE CAN ALSO PROVIDE INSTALATION AND START UP WITH ADDITIONAL OFFER. FOR THE SAFETY SYSTEM REQUEST WE CAN DO IT WITH ADDITIONAL OFFER

Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer -Manufacturer: Holac, knife holder for meat cutter multi-purpose cutter dicer -Type: Mounting Ø 43 x 100 mm -Design/Dimensions: see photos -Dimensions: 420/436/H100 mm -Weight: 20.9 kg

Interface, data acquisition device, test device, telemetry system, probe interface -Manufacturer: Renishaw, Probe Interface from coordinate measuring machine Stiefelmayer C 100 413514 -Type: PI 200 -Dimensions: 185/140/H90 mm -Weight: 1.5 kg

Interface, data acquisition device, test device, telemetry system, probe interface, laser measuring system -Manufacturer: Renishaw, laser measuring system from measuring machine Stiefelmayer C 100 413514 -Type: RGH22 D07S06 -Dimensions: 130/90/H45 mm -Weight: 0.2 kg

Caster, swivel caster, transport equipment caster, fixed caster, furniture caster -Swivel caster: with locking mechanism/brake -Wheel: Type Ø 100 x 32 mm -Thread: M12 -Quantity: 15x swivel casters available Price: per piece / Minimum order 4 pieces -Dimensions: 163/60/H150 mm -Weight: 0.6 kg/pc.

Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: with guide carriage -Centre height: 100 mm -Dimensions: see drawing in the photos -Dimensions: 580/100/H180 mm -Weight: 11.1 kg

Fan filter, fan array, air cooler, control cabinet fan, filter fan -Manufacturer: Rittal, filter fan type SK 3239.100 -Voltage: 24 V DC / 5.5 W -Number: 17 fans available Price: per piece -Dimensions: 205/205/H110 mm -Weight: 0.6 kg

Pneumatic cylinder, flat cylinder, pneumatic drive, piston, flat cylinder -Manufacturer: Festo, flat cylinder type DZH-32-100 PPV-A 14045 -Stroke travel: 100 mm -Piston rod: Ø 12 mm / M10 -Pmax: 10 bar -Quantity: 1 piece -Dimensions: 245/65/H80 mm -Weight: 1 kg

Plasma hose assembly, welding torch, MIG/MAG torch -Manufacturer: Kjellberg, Plasma machine torch hose assembly, water-cooled -Type: PerCut 100-1/O2 -Item No.: 11.835.421/56615/009 -Length: 7.0 m -Transport dimensions: Ø 570 x 170 mm -Weight: 10 kg

Caster, swivel caster, transport equipment caster, fixed caster -Manufacturer: Tente, swivel caster with locking mechanism/brake -Wheel: Ø 100 mm -Width: 36 mm -Number: 6x swivel casters available Price: per piece -Overall dimensions: 170/85/H130 mm -Weight: 0.9 kg/pc.

Caster, swivel caster, transport equipment caster, fixed caster -Swivel caster: Polyamide -Wheel: Ø 100 mm -Width: 36 mm -Number: 6x swivel casters available - Price: per piece -Overall dimensions: 145/85/H130 mm -Weight: 0.8 kg/pc.