house used for sale

This JUNKER Quickpoint 5002/20 Cylindrical Grinding Machine was manufactured in the year 2000 in Germany. It has a grinding diameter of 280 mm and a grinding length of 900 mm. Equipped with a travel z-axis of 900 mm it can handle a max. workpiece weight of 30 kg. As control unit it has a FANUC 15-TB control. It comes with 2x extraction units (made by LTA) and an oil filter system (built in-house). The machine is currently used as part of a robot line and will be sold because of replacement by a new machine. See photo and video gallery for more impressions.

inlie GEA DIESSEL syrup house DICON Dimix linear mixer Capacity 32000 l/h Total dimensions length x width x height: 1800 mm x 1300 mm x 2300 mm No mixing tanks. The DICON™ linear system mixes liquid ingredients in the selected mixing ratio (in the pipe); and, because less equipment is required, space requirements are reduced, maintenance and cleaning (e.g. cleaning in place) Description: The economical mPDS 1000 analysis unit continuously determines the density and concentration of liquids and gases. Since the assessment body has written several application programs, the following process applications can be included in the standard: measurement of extract, alcohol and original wort in beer, measurement of alcohol in distilleries, Brix measurement, true and relative density and API number of petroleum products and measurement of gas density. Special requests can also be fulfi ...

Ref.Nr. 00809 Description of the system 3D FIBER laser cutting machine Manufacturer: BLM ADIGE Model LT Free Year of construction 2017 Number of axes of laser head 5 axes Laser power 2000 watts Operating hours (15.04.2024) 869 h With radiator With extraction system Sideros - Footprint: without suction And Radiator Length: 5.50M Width:3.70M Height:4M (Radiator and extractor: side by side, length 3m, width 1.70m, height 2.70m) Floor space: approx. 24sqm Customer has only cut stainless steel 4mm so far. (According to the manufacturer, you can cut up to 6mm thicknesses. Until now, the machine has been used for machining stainless steel housings Without software - (customer uses in-house software) Supply voltage 400V +-10% Power consumption 16 kVA Technical condition: The laser is in very good technical condition Maintenance was carried o ...

Key data: 63 mm

We offer you a PURE LOOP extruder for sale that has been completely remanufactured in-house. This machine was put into operation for the first time in 2018 and was taken back by us from the former first owner in the course of an EREMA new machine purchase. The machine is designed for a throughput of up to 180kg per hour and is suitable for PE and PP. If you are interested in this machine, please do not hesitate to contact us!

Overview This brewing facility, with equipment from 2018 - 2020, is becoming available as brewing operations will cease in the summer. The machines are still in operation and will be available from 01.05.2024. This offer consists of a malt mill (Maltman), brewhouse (Speidel), fermentation and storage tanks (Speidel), a bottle filler (Rizzolio) with labeling (ENOS) as well as accessories for the operation of the brewery. Scope Brew house | Braumeister | 500l | 2019 3x Pressure Tank | Speidel BBT | 1.2 bar 625l | 2018 – 2020 1x Pressure Tank | Speidel BBT | 2.5 bar 625l | 2021 4x Fermentation and storage tanks | Speidel BBT | 625l | 2018 Counter pressure filler | Rizzolio | RLV 4-4-2 | 2019 Cooler with 100l buffer tank and automation | Energytech/ Onnline | 2019 Labeller | Enos Euro | Compatta | 2020 Mill | Maltman | MM-150SP | 2018 Density meter | Anton Paar | DMA35 | 2019 Plate heat ex ...

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (L/W/H): 6100x1500x2300 mm Weight: 950 kg 1 Götzinger Power Drill drilling and milling center ------------------------------------------------- Machine is FACTORY TESTED by Götzinger before delivery. Depending on the type and version, you can use the Götzinger PowerDrill to: - Drill on the front and long sides - Doweling of house doors, timbers, brackets - The drilling patterns are freely programmable - You can: drill handle olives and corner bearings, with quick-change ones Multi-spindle drilling heads - You can: mill lock cases, handles and PZ as well as 3D hinges drill - The machine has a horizontal and a vertical milling unit - A simple control allows you to create drilling and milling programs, save and access again and again Stable base frame, covered with sheet metal Table ...

Key data: 80 mm

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA RGA 80 TE, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are exchanged for original EREMA spare parts. The machine is designed for a throughput of up to 250-300kg per hour and is suitable for PP. If you are interested in this machine, please do not hesitate to contact us!

Key data: 140 mm

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA INTAREMA® 1714 TVEplus®, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are exchanged for original EREMA spare parts. The machine is designed for a throughput of up to 1200kg per hour and is suitable for PE as well as PP. If you are interested in this machine, please do not hesitate to contact us!

Key data: 140 mm

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA 1514T, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are replaced with original EREMA spare parts. The machine is designed for a throughput of up to 1100kg per hour and is suitable for PE as well as PP. If you are interested in this machine, please do not hesitate to contact us!

Key data: 50 mm

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an INTAREMA® 605K, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are replaced with original EREMA spare parts. The machine is designed for a throughput of up to 90kg per hour and is suitable for LDPE. If you are interested in this machine, please do not hesitate to contact us!

x-travel:1600 mm y-travel:1300 mm z-travel:700 mm distance between columns:1500 mm distance spindle center to table:225-925 mm table-size:1800 x 1300 mm table load:4000 kg T-slot (width-distance-quantity):22x 160 x 8 mm spindle taper:HSK-A 63 spindle speed:24000 U/min spindle drive:25/33 kW Spindle motor torque:72.6/95.8 N.m. rapid traverse in x-y-z axis:30000 mm/min Cutting feed rate X/Y/Z axis:1~20000 mm/min Tool changer:20 fach max. tool diameter:100/130 mm max. tool length:300 mm max. tool weight:8 kg total power requirement:80 kva Weight approx.:22 t Machine size (LxWxH):5660 x 5295 x 3930 mm CNC controller:Heidenhain TNC 620 spindle:IBAG electric spindle 24000rpm HSK-A63 Scales:Heidenhain automatic tool changer:20 fach chip conveyor - auger:2 Stk. Used portal milling machine with extensive accessories at a special introductory price. Important manufacturers of the components used i ...

General SKU256K252 LocationBarneveld Makeunknown, manufacturer tag is missing Material Housing materialStainless steel Disc materialMild steel Rotor materialMild steel Main Features MaterialMild steel Motor15 KW Inlet diameter180 mm Specified Features - Miscellaneous Mill GrinderPerforated disc mill (1x) Rotor sizedia. 180mm House jacketedcheck Inletdia. 25mm Motor15,0 KW, 220/380 Volt (Ex) Speed2925 Rpm Miscellaneous Mills MaterialStainless steel Information Floorspace1,1x0,4 M Total height0,5 M Weight260 KG ATEX compatiblecheck Extra SpecificationsDisc is perforatedMiscellaneous Mills-Mills > Miscellaneous MillsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit  ...

Max. size= 45 x 35 cm, Availability= 092023, perfect folding machine for in-house printers, copy and letter shops as well as for digital printers. PBA underfloor suction feeder with integrated alignment table 2 pockets Total counter, control panel, double sheet control, scoring, perforating and cutting devices formats: max. 35x45 cm min. 8.5 x 12 cm Fold length: max. 36 cm; minimum 5cm Paper weight: 40 - 250 g/m² Speed: 160m/min Power connection: 230 V / 10A LOT Loaded in truck or container

This Rational UltraVent hood for Rational combi steamers, including connection kit, fits the CMP, SCC 61/101 electric combi steamers from 2011 to the present (index H+I). The hood has been tested in our in-house workshop and is fully functional. The RRP. for this Ultravent hood is 3.696 € net. The indicated price is net, plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6 months warranty on all electrical parts • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back � ...

This Rational UltraVent hood for Rational combi steamers, including connection kit, fits the CMP, SCC 61/101 electric combi steamers from 2011 to the present (index H+I). The hood has been tested in our in-house workshop and is fully functional. The RRP. for this Ultravent hood is 3.696 € net. The indicated price is net, plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6 months warranty on all electrical parts • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back � ...

This Rational UltraVent hood for Rational combi steamers, including connection kit, fits the CMP, SCC 61/101 electric combi steamers from 2011 to the present (index H+I) suitable for CombiDuo systems (individual use is also possible). The hood has been tested in our in-house workshop and is fully functional. The RRP. for this Ultravent hood is 3.696 € net. The indicated price is net, plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: • 6 months warranty on all electrical parts • Professional Overhaul / Inspection & Professi ...

Tire houses screw 90 mm - 25 l/d many more screws available from stock, some as good as new

C-Module AUSTRIA ERICH PETER MASCHINEN-PLANTS GMBH A - 7083 Purbach - Austria office@machines-plants.at www.machines-plants.at Affordable housing, affordable houses, Hotels - Residential complexes - Residential complexes - Detached houses - cheap houses we have sold our used ones, we also offer NEW C-Module 3000 mm x 6000 mm NEW FORMEN Cheap houses - cheap apartments I am proud to introduce you to our improved system for building affordable homes. Especially for villages and small towns. But hotels have already been built in this way - we can do all the planning for them. A useful system also for stairwells, corridors and elevator shafts - easy to manufacture. It is a modular system, but still flexible in the size of the room and in the positioning of the windows and doors. Connecting to other materials such as wood, glass and concrete slab is easy. Th ...

Makita chain moulder 7101, 110V This article is in good and working condition. Chain mortiser for fast, clean, and precise nicks or cuts through holes in wood. Ideal for timber-frame houses, sheds, huts, restoration and much more.

The cable granulating system RMH 1 d grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly ...

Application: Picture frames, window construction, prefabricated houses, glass strips, hollow-throat strips, interior fittings, skirting boards, door construction, decorative strips, decorative profiles, etc. For Brads (compression head pins) of type "J" from 16 - 50 mm Technical data: - release protection - side loader magazine - setback-free - silencer - weight: 1.25 kg - working pressure: approx. 4-7 bar - air consumption: approx. 0.7 l / nailing Delivery in a plastic case

The cable granulating system RMH 2D grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly  ...

Bin Compactor BTS-240L Bin Compactor With the BTS-240L Bin Compactor for 240 Lt. garbage bins large bulky rubbish but also cardboard and recyclable materials is compacted easy and safe to a minimum of its size. This gives users the advantage of reducing bin volume up to 80%, waste disposal costs are reduced sustainably and a safe and clean working environment is also created. - Compaction up to 80% - Reduces frequency of waste collection - Useable for wet and dry household and commercial waste - Optimum utilization of waste container - Reduces the number of waste containers - No climb into the garbage container more - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 2 Ton Motor: 1.5 kW 13 Amp Power supply: 220-240 V (1 Phase) Machine size (H x W x D): 2360 x 780 x 780 mm Transportation height: 2360 mm Machine weight: 234 kg  ...

Beer tanks / fermentation tanks and storage tanks 118.700 Liter Brand new cylindroconical Beer tanks / fermentation tanks and storage tanks designed for installation in stainless steel V2A room, WSt 1.4301 IIIc Capacity: 118.700 Liter Total content approx. 118.700 ltr. Net content of fermented about 87,700 liters. Inner diameter about 3,900 mm Outer diameter approx. 4,100 mm Cyl. Height about 8,500 mm Eaves height approx. 13,500 mm Total height approx. 14,100 mm Ground clearance: 1,280 mm Perm. Operating pressure: 1 bar Perm. Operating temperature: 40 ° C Perm. spec. Weight: 1.05 kg / dm³ Cooling jacket: Cooling zones on the cylinder approx. 4 x 16.5 m² (total approx. 66 m²) Cooling zone cone approx. 10.5 m² Perm. Operating pressure: 4 bar Perm. Operating temperature: -10/40 ° C Insulation thickness: 100 mm Material: Cr-Ni steel, WSt. ...

Office container "Cash houses", 8 feet (2.4 x 1.4 m) We rent and sell storage containers, sea containers, construction containers, overseas containers, double office container systems. Offer with transport possible - ask us. Example pictures - visit possible by arrangement. Please also take note of our other offers.

CATALOG NO. HZ017 PRODUCT FEATURES The manufacturer guarantees the quality of treatment The use of technology Viber shaking off Power is another milestone in the production of high-performance exhausts sawdust, which aim to provide the same fixed parameters during the entire extraction cycle. Lashing equipment in the electronics and engine technology Power Viber allows you to constantly monitor the status of dust The automatic vibratory cleaning the filter cloth - during the break, and during operation of the filter allows for constant monitoring of correct operation. The filter used in our odciągach was built from the filter elements of the expansion element, in which you enter the pipe. It is intended to produce a large expansion of air and, consequently, will result in free fall all sawdust and other waste containers / bags. Reliability confirmed by the factories every day s ...

High pressure cleaner PTC CJ-1E similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 110 bar - Foerder quantity: 12 l/min. - Motor: Electric 4-pole 230V 2.2kW, 1400 1-min - Dimensions: 540 x 440 x 680 mm - Empty weight: approx. 40 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - Stable plastic housing made of injection moulding - Practical holding device for gun with lance - Self-priming pumps with EASY-START equipment - Handle with brackets for the power cord and the high-pressure hose - Easy maintenance by simply removing the front panel - Large wheels (220 mm) for easy movement on steps and over uneven terrain - Manometer - Built-in professional relief valve - Delayed TotalStop - Pulsating system - Rotary switch - Thermal motor protection - Manual stainles ...

Special production plant of the brand Friulmac for the production of (standard) garden houses, wooden houses, log houses etc. System Block construction and block plank construction tools, milling and suction device. As good as new!

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Platform The platform has a universal adapter and contains the necessary electrical and mechanical components for all function modules. This gives you the opportunity to gradually purchase additional modules later and connect them without any problems. The Function Modules The modules contain all process engineering functional components for the respective picoline® variant such as classifier head, housing parts, grinding tools, motor adapters etc ...

Ceetec's new A250 paint machine is here! As an official and exclusive sales partner for the German-speaking region, I am pleased to present our latest model to you. After almost 50 years of construction of the previous model since the beginning of the 1970s (better known as the GORI brush machine), the new model is now an extensive update with extended applications. Who is this machine suitable for? - Carpentry /carpentry that manufactures carports, facades, terraces, garden houses, etc. - Wood industry companies that paint, read or impregnate industrial boards / beams / slabs etc. Technical data: max. workpiece height: 250mm max. workpiece width: 250mm (or 380mm = Ceetec A380) Speed: 16-42m/min Connection: 400V / 1.5kw Benefits ggü. simple spray painting: 1. The wood protection is massaged evenly into all pores, which ensures a high resistance. 2. Different su ...

CTS climate test cell Walk-in test facility Here we offer you a CTS climate test cell. CTS climate test cell type TW -60/20 T means: Temperature W means: Walk in -60 means: lower temperature -60 °C 20 means: 20 m³ test room volume Plant description: With the temperature test cell, the function or material property of a test material can be tested under temperature influences. The system is divided into the test chamber including the machine compartment and a control station including a lock. The lock can be tempered independently of the control station or test chamber to minimize moisture input when entering the test chamber. The vertical air flow with a correspondingly high amount of recirculating air guarantees a good temperature transfer to the test material. The air treatment room is located at the back of the interior. To the left of the system, the units are located ...

TECHNICAL DATA: Complete production line for Blockhaus processing consisting of 02 machines: Hundegger joinery machine model K3 and special Friulmac system model Idramat SQ The combination of the two machines allows the realization in a continuous cycle of: Bungalows Garden sheds Temporary houses Small houses Tourist accommodations Emergency accommodation

A 7-stage GEA Wiegand evaporation plant with mechanical vapour compression, Made of V4A material with 2 identical high concentrators and one Vapour compression system for 2 Hoko systems. Capacity: 50,000 litres per hour Year of manufacture 2007 Product enema: 52,000 kg or 38,500 kg/h Concentrate: 12,240 kg or 18,900 kg/h for truck transport Steam consumption Low pressure steam : 300 kg/h with Live steam: 1,000 kg/h, when heating the system max. 2,300 kg/h further energy data can be found in the plant With a concentrate supply tank and with a complete cleaning system, location ground floor with complete tank piping to 2 x 50,000 l tanks and with complete control in Siemens S 7, as well as for the Entire electrical supply with 5 wall control cabinets for pneumatic cabling housed in 5 control cabinets, with various smaller frequency converters and 1 frequency con ...

Machine code: IT352 Manufacturer: Uhlmann Model: UPS300 Year of construction: 2001 Uhlmann This is a fully automatic, intermittent motion Blisterpacking machine with a capacity up to 50 cycles per minute. The maximum output is 200 Blisters per minute depending on blister size. The machine is of ‘balcony construction’ - all relevant stations are individual modules, which are cantilevered off a large aluminium plate that forms the front of the machine housing. The remainder of the machine cabinet is constructed from fabricated steel and houses the drive unit, gear trains, chain drives and the electrical control equipment. PVC, PVC/PVDC, PVC/Aclar film is drawn from a reel and is first heated and softened and then deep-drawn in the blister forming station. The blisters are formed in the mould with the aid of compressed air – the web is then pulled forward, up and across  ...

Chilworth JCI 164 High Voltage Adapter General description The JCI 146 is a voltmeter adapter component designed for integration into wider experimental systems. In combination with our JCI 140, the system enables the measurement of live conductors with voltages up to ± 60 kV DC by direct connection with an accuracy of ± 2% (nominal) with minimal load effects on the device under test. The JCI 146's high input impedance and low capacitance are suitable for more accurate DC voltage measurements. Other traditional techniques for directly measuring high voltages (e.g., high-voltage meters, capacitive and resistive divider networks, etc.) often provide inaccurate results due to load effects caused by the measurement setup. This device can be used to cross-check the calibration and accuracy of high-voltage sources by power utilities, calibration test houses and cable manufacture ...

Mini roller cutter Our range now also includes machines for processing residual rolls, for example from paper production, the packaging industry, printing houses, textiles, aluminium rolls, film rolls, etc. These heavy rollers cannot be processed efficiently and safely with the normal cutting systems, but with these special "guillotine" roller cutters this is no longer a problem. The mini roller cutter can be seen here as a standard version. We offer the Mini roller cutter in version G20 / 25 and G30. All data can be customized according to the customer's wishes. (Sensors | Protective grille | Light barriers | colour, etc.) Roll width: max. 700 mm Roller height: max. 800 mm Drive: 5.5 Kw Cutting force: 25 T cylinders Weight: 1200 kg Working cycle: 65 seconds Including automatic return: Important roll cutting width and roll cutting height can be adjusted as desired. Dep ...

Code: 0533 Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TAG 1/C 3000 - CE Standard Automatic wide belt sander with mobile head 3000 mm for wood, panels in general, plywood, truck beds, camper vans, caravans, prefabricated houses, shipbuilding, aeronautical industry, composite materials and various - CE Standard - Year 2005 Technical data: Working width mm 3000 Max working height mm 100 Min working height mm 2 Variable belt feed speed m/min 5/25 with inverter - Motor Kw 4 Calibrating/sanding steel roller - Diameter mm 400 - Belt development mm 2620 x 3050 - Motor Hp 50 (Kw 37) - Rpm 1465 Front and rear brackets for holding pieces Oscillating blowers for cleaning front and rear belt l/min 2000 Automatic head lifting Rotating blowers for cleaning output panels - 2 suction mouths diameter 160 mm Numerical control Syel for working group management Emergency safety bar Suc ...

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 in good condition, cleaned and checked Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precis ...

Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Eeep90t Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1990 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut Roller conve ...

Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 SN 1989-02-08 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut  ...

Compact small briquetting press CA 10-15 KG/H Diameter of the briquettes approx. 55 mm 2.6 KW POWER CONSUMPTION V 230/50 CAN BE OPERATED WITH HOUSEHOLD ELECTRICITY BUT ALSO OPERABLE WITH V400/50 AND ZERO-WIRE PLUG ADJUSTABLE PLIERS Machine for do-it-yourselfers or small craft businesses Space requirement approx. .170x50x100cm, Weight 90kg

MAN Diesel D2842LE with 434 kW A.van Kaick Generator 500/610 kVA additional 25 kVA genset A.van Kaick Generator approx. 4,800 h built 1993 both housed in one container

This is a fully refurbished, VERY powerful, multitasking Two (Twin) ARP Shaft Shredder. The machine has gone through complete check and change of all flanges, bearings, reducer and oil inside. The machine full specs are: - New motors of total power 20hp - 15kw (2 x 7,5kw motors) - Alternative hydraulic power motors which fit perfect if the machine needs to work on a truck. - 24 knife pieces X 20mm per piece - Made in Germany - Cutting chamber 500mm X 575mm - Approximate weight 2 tons - New control panel with Siemens PLC, Star - Delta, over-current and over-temperature motor protection, Amper Display. - Automatic reverse upon overload and optionally manual forward and reverse. - Special hood used for small items (ie. paper, hard drives) or big hood for barrels and wood. - Hood opens in front for adjusting belt conveyor This is ...

SAACKE UW I D CNC universal grinding machine was manufactured in Germany in 2020. The extremely powerful machine is designed for the fully automatic wet grinding of a wide range of tools, such as knives, cutters or drills. Machining is performed in a single work cycle, which significantly increases production efficiency, saves time and reduces costs. The SAACKE CNC tool grinding machine allows the use of a chain or pallet system for automatic tool feeding and machining of workpieces within it with a maximum diameter of 250 mm and a length of 480 mm. Precision tool grinding is performed in five numerically controlled axes (X,Y,Z,A,B) using grinding wheels housed in a 6-position magazine separated from the workspace with an automatic grinding wheel changing system. In order to guarantee high travel speeds and positioning accuracy, the X,Y and Z axes of the UWID CNC tool grinder are m ...

6000W Raycus The machine is fully equipped: - CYPCUT - high-end CNC with German surface - Raycus - laser source - Raytool cutting head - Interchangeable table - 1 CCD camera, 1 for indoor use -Stabilizer - Air conditioning for control cabinet - High-performance radiator - Anti-collision protection - 24 months warranty Working area (mm) 3000 x 1500; 6000 x 2000; 4000 x 2000 Max. working height (mm) 100 Effective travel X axis (mm) 3050; 6050; 4050 Y axis (mm) 1550; 2050; 2050 Z axis (mm) 100 Position accuracy X axis (mm/m) ±0.03 Y axis (mm/m) ±0.03 Z axis (mm/m) ±0.01 Repeatability X axis (mm) ±0.01 Y axis (mm) ±0.01 Z axis (mm) ±0.005 Positioning speed X axis (m/min) 120 Y axis (m/min) 120 Z axis (m/min) 30 Acceleration: X-axis: 1.5G , Y-axis: 1.5G Working table load 2000 kg Table change in sec. 20 Max Cutting Height ...

THE MOST IMPORTANT FACTS AT A GLANCE:grinds 50 grams of wheat per minute, several times the amount on coarser settingsHopper capacity: 600 g (wheat)Grinder: corundum/ceramicHousing:Body: solid maple, rounded edgesFunnel, lid: solid mapleDrip tray made of wood and stainless steelTwo stable table clamps (clamping range min. 1.7 cm and max. 5.7 cm) for sufficient stabilityGrinding chamber: food-safe plastic (BPA-free)A ball-bearing crank that runs particularly smoothly Is volume at ? Fine?: approx. 60 dbWeight: 2.5 kgHeight / Width / Depth: 25.1 cm/ 14.0 cm/ 15.5 cmPerfect for a household size of 1-2 people3 years warranty for private use! You will receive a manufacturer's warranty from the date of purchase and an invoice with VAT. You can pick up on site and pay cash

Tenon mills in perfection A video of the running machine can be sent on request. Program 1: Set-up operation Program 2: Manual milling Program 3: Straight or oblique pins up to 60 degrees with chamfering and starvation Program 4: Flattening, e.g. for corner and ridge blades Precise adjustment options and precise positioning by laser Special milling head with milling ring for plating, chamfering and tenon milling High-torque 6kW motor with automatic motor brake Feed control for hardwood use 3m stop profile with scale Tenon milling at right angles up to approx. 500 x 250mm Ideal machine for carpentry, timber construction, half-timbered houses, carports and pergolas Suction connection 2 x 100mm Protective curtain automatically opening and closing Hood lock Kill switch CE mark Includes instruction manual and comprehensive on-board tools Original paint, only dabbed  ...

Compact packaging machine from a renowned manufacturer. For example, suitable for packaging food (bakery products, bread, cakes, chocolates), bottles, household goods, toys, technical articles, printing and paper products, cosmetics and textiles. -Display with settings for welding time, cooling time, shrink temperature and shrink time. -Perforation possible via three adjustable needle rings. - Maximum package size approximately: length 460 x width 320 x height 200 mm. -Maximum film roll approximately: length 400 mm / diameter 250 mm. -Equipped with a holding magnet. -Working height approx. 900 mm. -Roller holder movable. -Adjustable product slot. -The machine can be moved and locked with castors. -Can also be used as a tabletop unit, as the top part is removable. -230 V / 50 Hz. -Documentation consisting of operating instructions, circuit diagram and spare parts list ...