house used for sale

length: 1500 x 740 x 780 innen mm weight of the machine ca.: ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bosch Starter Lifetime Testing The machine is a Bosch in-house production. It is used to check the service life or durability of starters (including starters) of engines. Manufacturer: Bosch Type: Machine for service life testing of starters Condition: used The testing machine is located in Hildesheim and can be dismantled and picked up there by the customer. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Blasting house with extraction floor for mineral abrasives (glass, ceramics, corundum, garnet sand and so on). Magnetic separator, cyclone, preparation, material bunker, abrasive refill, free jet pressure blower, filter system with cleaning. Lining of the walls with 4mm fabric rubber

Steel hall, steel construction, nacelle partly covered sandwich panels used Manufacturer: unknown partially covered sandwich panels welded Dimensions approx. 6.5 x 6.5 x 5 m The house was part of a large dry mortar and dry plaster mixing plant. We also have various other components, such as filters, elevators, scale containers, screws... Changes and errors in the technical data, information and prices as well as prior sale reserved.

The shuttles were used until October 2021. Maintenance by the in-house technicians and Knapp is carried out regularly. The shuttles are neatly stored and can be called up at any time. There were originally over 70 shuttles in use. Just ask how many are still available. Containers of the sizes 60x40 cm and 40x30cm were used. It could be stored up to four times deep.

For sale is a functioning pellet production line including controls. The plant is suitable for pelletizing agricultural raw materials (straw/hay/alfalfa etc.) and has an output of 1000-1600 kg/hour depending on the material. The complete system has approx. 800 operating hours The production line is composed of: cjffolp2bh Byfo0wxd Bale breaker 37 KW + bale conveyor table 10m and Hammer mill 75 KW Zyklon + Rotary Valve + Buffer Tank Scheuch dust filter house with control system and a capacity of 20,000m3/h including discharge for big bags, 2 Koller ring matrices pellet mill 110 KW with aut. Central lubrication. In the associated conditioner, the moisture content of the material is automatically controlled by means of a dosing pump and mist nozzle as well as a microwave sensor from the Envea brand. Pellet cooler with level sensors and automatic emptying. Vibrating scr ...

I sell an automatic CNC machining center for BLOCK-HOUSE manufacturing Stromab Autoblox. Year of construction 2011. New machine. Cutting saw 600mm / 7,5kW Dubel drilling unit up to dia.35mm x depth up to 320mm Pin milling machine up to dia.230mm / 4kW Horizontal milling machine up to dia.230mm / 4kW Vertical milling machine up to dia.180mm / 4kW Automatic feed system +-1mm Good for the timber construction structures! Available the same.

Band saw 400 mm Product Name: Band Saw Type: Model 402 Manufacturer: Country Bulgaria Serial number: 1594 Year of construction: 1980 Condition: used, completely refurbished Technical details: - Table size: 630 x 630 mm - Table inclination: approx. 30° - Cutting height: approx. 220 mm - Cutting width without stop: 380 mm - Saw blade guide with one back roller each at the top and bottom - Belt length: 3,015 mm - Roll diameter: 400 mm - Diameter of suction nozzle: 80 mm -Incl. 2 pieces of saw blades - 10 mm for plastic 1 piece of saw blade – 12 mm for wood 14 saw blades – 18 mm for wood - no stop available ! Engine data: - 380 V / 50 Hz / 2.5 A (see nameplate!) - Power: 1.1 kW - Speed: 1410 rpm Transport dimensions: - Width: 1,050 mm, Depth: 640 mm, Height: 1,850 mm - Transport dimensions (L x W x H): 1,200 x 800 x 2,020, stored on E ...

Letterpress printing machine Bautzner Industriewerk, machine number 4868. Rolling rods, however, the rollers must be re-upholstered. Can be done by us for an extra charge. In good condition, immediately available. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

length: 0 mm weight of the machine ca.: ca. 200 kg. For collecting and disposing of bulk goods and industrial waste Furnishing : - Tipping containers - forklift attachments - for in-house storage of bulk goods - powder-coated in standard color - RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray - Tilting device with base plates for swivel and fixed castors - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges - Container volume: approx. 600 l available for a surcharge: - 2x fixed castors / 1x swivel castor .. 59.00 euros The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This is a pressure cooking kettle from the premium manufacturer Elro, type DGN2-EID-90. It is an absolute premium product in commercial kitchen technology. Ideally suited for production kitchens for continuous operation at full load. An absolute premium product in commercial kitchen technology and stands for the highest quality and durability. The material properties are almost indestructible and it is always worthwhile to replace wear parts. This high-quality cooking kettle is equipped with the Elro Qiuck Cook Select control, which allows for the simplest operation. The device is mounted on feet The cooking kettle has been tested in our in-house workshop and provided with the necessary inspection work. The price quoted is net plus 19% VAT. Our used equipment service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices •  ...

This is a pressure cooker from the premium manufacturer Elro, type DBGN33-EDS-90 from the Metatherm series (latest version), built in 2021 by professionals for professionals. Ideally suited for production kitchens for continuous operation at full load. An absolute premium product in commercial kitchen technology and stands for the highest quality and durability. The material properties are almost indestructible and it is always worthwhile to replace wear parts. This high-quality roaster is equipped with the Elro Quick Cook Select control, which allows for the simplest operation. The Braisiere is in an absolutely unused condition. Device is mounted on feet. The device has been tested in our in-house specialist workshop and provided with the necessary inspection work. There are also more Elro devices coming and coming soon. The price quoted is net plus 19% VAT. Our used equipmen ...

Label book printing machine Labelmen PW180DLU, YOC 1996, 4 colors, punching unit, embossing device, various mounting plates, laminators, UV dryers, dispensers, Slitten rewinders, in good condition, immediately Available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

This is a tilt pressure garage from the premium manufacturer Elro, type DBKGN33-EDS-90-L equipped with an automatic lift function. It is an absolute premium product in commercial kitchen technology and stands for the highest quality and durability. This product is almost indestructible. This high-quality roaster is equipped with the Elro Quick Cook Select control, which allows for the simplest operation. The device is in an absolutely unused condition. Device is mounted on feet. The tilt pressure curtain has been tested in our in-house specialist workshop and provided with the necessary inspection work. There are also more Elro devices coming and coming soon. The price quoted is net plus 19% VAT. Our used equipment service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Profe ...

Key data: 1027 KW, 1805 1/min

TO WHOM IT MAY CONCERN ; WE VE 2 PCS USED PROPULSUION ENGINES DEUTZ MWM TBD 620V8 AT OUR STOCK. ENGINES WERE DISMANTLED FROM SUPER YACHT . ENGINES ARE FULL ORIGINAL MARINE ENGINES. ENGINES ARE IN GOOD WORKING CONDATIONS . ENGINE DETAILS ON BELOW TYPE. : DEUTZ MWM TBD 620V8 YOB. : 2002 KW. : 1027 RPM. : 1805 ENGINES NO. : 2203455 & 2203456 ENGINES READY TO INSECTIONS AT OUR WARE HOUSE AND READY TO SHIPMENT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. ENGINES HAS ALSO ZF GEAR BOXES ( THOSE CAN SELL SEPERATLEY ) ZF 4600 NR CAP. AYHAN UGURLUBAY With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

Folding machine MBO T49/4, machine number 83067246, 4 pockets + delivery, flat stack feeder, counter, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Screen Truepress 344 Year: 2006 Counter stand: 16 mio. Machine was converted to being able to use classic printing plates. It is in good working condition, located in a specialised and renowned printing house in Slovenia. Price: onrequest

This combi steamer from the premium manufacturer Rational is a CombiMaster® Plus with 20 x 1/1 Gastronorm inserts in electric design. Please note that this device is in extremely well-maintained condition. The device has undergone an extensive inspection in our in-house workshop and is fully functional. The RRP. for this combi steamer is € 18,920 net. The price quoted is net plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This device is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Our used equipment s ...

Bosch Diffusion Welding Machine The product is an in-house production of Bosch and was used for diffusion welding of anchors. If necessary, the machine can also be used elsewhere. Manufacturer: Bosch Type: Diffusion welding machine for anchor among other things, the following components are installed. Bosch BT 5 Rexroth BT 6 Alpha SP 0755-mf2-100 Aventics 0822395006 Rexroth PST 6000 Quint Power Phoenix Contact 24V 10A Rexroth DKC10.3-008-3-MGP -01VRS Year of construction: 2005 Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

2020 Type: PBW12.956/300 PUR - gluing device with remote diagnosis with cooling and drying sections with three cutters – System DGR D09 With compressor in-house compressed air supply / chip extraction located: Germany Available: immediately

pressure: 80 t throat: - mm stroke: 8 - 112 mm table surface area: 830 x 550 mm no. of strokes: 30 - 85 Hub/min ram surface: 630 x 400 mm ram adjustment: 71 mm clamping plate: 990 x 550 mm table height over floor: 810 mm total power requirement: 10 kW weight of the machine ca.: 7,7 t dimensions of the machine ca.: 1,5 x 2,2 x 3,15 m Equipment: - with wheel presentation - fixed table - with roller feed, make PRESSMAC, type MAC 380 P, belt width 300 mm Selling price applies without inspection and without a test run. The machine should be partially overhauled in our house (at an additional cost) - Complete disassembly and review - livery - new control cabinet with PLC and touchscreen including cabling. Price of the machine in partially overhauled condition: € 44,000.00 Delivery time for the partially overhauled machines: by agreement The data for this ad was created with ModulMWS - the  ...

This combi steamer from the manufacturer Rational is a CombiMaster® Plus with 20 x 2/1 Gastronorm inserts in electric version from 2012. The combi steamer is the XXL version and offers space for 20x 2/1GN or 40x 1/1GN The device has been tested in our in-house workshop and is fully functional. The RRP. for this combi steamer is € 27,110 net. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This device is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Our used equipment service for you: •6 months warranty on all electri ...

This is a 150 litre pressure cooker from the premium manufacturer Küppersbusch (Phoeniks), type KCF0409 (002152). Emptying is carried out without any problems via a safety drain tap. The pressure cooker has an electronic temperature controller as well as a KCI touch panel control (Inovative). The device has undergone a major inspection in our in-house workshop and is fully functional. The pressure cooker kettle is completely unused and in top condition. The RRP for this device is €19,165. The price quoted is net plus 19% VAT. Our used equipment service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected • Expert advice - before and after the purchase  ...

ATTENTION HAMMER PRICE ASK FOR YOUR SPECIAL PRICE ! This is a panini grill from the manufacturer Electrolux, type HSG3RPRP5. This grill combines the heating variants microwave, infrared radiator and contact hot plate. At the end of the program, the lid opens automatically. As a result, each product always has the same quality. The grill plate is approx. 215 x 215 mm in size. It is controlled by 4 programs with a runtime of 30 - 60 seconds. This allows you to toast perfectly and heat the core of your panini at the same time – up to 5x faster than with a conventional device. The device has been tested in our in-house workshop and is fully functional. SpeeDelight is the new professional solution for mobile businesses: an appliance with the unique combination of different cooking techniques. Serve delicious fast food in record time: not just a snack, but an absolute taste experience.  ...

Register punch EUROTRON IND-XR 500, year of construction 2004, serial number S1-2004-1, with adjustable X-axis and Y-axis see result Photo of test, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome, by prior appointment, to visit the machine in our house.

Fiber Showroom Machine - FIBERLASER Model Series HLF Power: 6kW Sheet size: 3000 x 1500mm Changing table Siemens touchscreen control with LAN/USB Siemens Drives Tsubaki conveyor belt for small parts automatic sheet metal layer measurement Precitec Auto Focus Procutter Cutting Head IPG Resonator YLS with 6kW Will include: Warranty CAD CAM Software Libellula[CUT] Commissioning Delivery within Germany Training offered Other sizes / power levels up to 15kW are available at short notice. We are trading house and service provider in Germany for YAWEI machines for more than 15 years. All training / services / spare parts deliveries are handled by us. In our showroom, YAWEI fiber lasers and press brakes can always be tested under power.

Register punch Hunkeler RE 320, Photocells Working width 42cm+ Machine number 4763-20, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome, by prior appointment, to visit the machine in our house.

This is a CM(P) 61 combi steamer from the premium manufacturer Rational, in electric version, built in 2018. The device has undergone an extensive inspection in our in-house workshop and is fully functional. Specifications: • W x D x H: approx. 847 x 776 x 782 mm • Power supply: 400 V / kW: 11.0 / 50-60 Hz • Capacity: 5x1/1 GN • Weight: approx. 103 kg • Serial number: E61MI18072681386 • Year of construction: 2018 Used, fully functional. 6-month warranty on electrical parts. Warranty condition: Please note that devices with a three-phase connection (400V), water connection and/or gas-powered devices may only be connected by a specialist company certified by the manufacturer! Only the submission of the commissioning protocol entitles the holder to warranty claims The price quoted is net plus 19% VAT. Service: We are happy to advise you on all types of device ...

Complete 96 MWe gas fired black start/ peak load power station, consisting of 4 (four) GE Frame 5N Gas Turbine Sets 24 MW each. Each set consists of a: • Gasturbine • Generator • Diesel Engine • Main Gearbox • Auxiliary Gearbox • Speedtronic Mark II control system • Exhaust plenum • Air inlet filter house 125 MVA transformer With or without building. additional info on request.

This is a rectangular pressure cooker FER250 from Küppersbusch. The device is equipped with the innovative KCI touch panel control and has a low-maintenance, closed PERMAPRESS system. The cooking kettle is in top condition. The device has been tested in our in-house workshop, provided with predictive maintenance work and is fully functional. The RRP for this device is €29,970 net. Contact us for your special offer! Our service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected • Expert advice - before and after the purchase • Provision of operating instructions, connection diagrams and spare parts •Testing according to DGUV V3 seal Technical de ...

This is a 150 litre pressure cooker round (FES 150) from the premium manufacturer Küppersbusch (Phoeniks). Emptying is carried out without any problems via a safety drain tap. The pressure cooker has an electronic temperature controller as well as a KCI touch panel control (Inovative). The device has undergone a major inspection in our in-house workshop and is fully functional. The pressure cooker kettle is completely unused and in top condition. The RRP for this device is €19,165. Our used equipment service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected • Expert advice - before and after the purchase • Provision of operating instructions, connecti ...

This is an electric rectangular cooking kettle from the premium manufacturer Electrolux/Therma, type PBEN40EKEM (400 litres) from 2017. The appliance is suitable for cooking, steaming, poaching, stewing or simmering/simmering food. The boiler is equipped with a closed, non-refillable "electric steam heating system" (without replenishment from the water network). Heating is provided by an electric steam heater. Here the electrical energy is converted into steam, working pressure 1.5bar. The radiators are equipped with boil-dry protection. The heating capacity is divided into 4 heating levels with automatic transition from the boiling to the continuing cooking process by an energy-saving microprocessor control. Equipped with the therma touch control for permanent, easy-to-read display of target and actual values such as temperature, working time and power levels. This is a pedestal install ...

specifications: - Air output: 6,000 m³/h - Pressing PA max: 500 Pa - Diameter pressure connection: 350 mm - Filter area: approx. 3.25 m² - Working surface (W x H): 2,080 x 1,930 mm - Area baffle: 1,800 x 1,800 mm - Dimensions of adjustable baffle plates (li + re): each 1,800 x 440 mm Engine data: - Power: 1.8 kW - Voltage: 380 V (star-delta) - Current: 3.8 A - Frequency: 50 Hz - Speed: 1,415 rpm - Transport dimensions (H x W x D): 2,500 x 2,000 x 800 mm (with pallet and mounted baffle plate and nozzles) - Weight: approx. 300 kg - Number of packaging units: 1 piece (on disposable pallet) The extraction wall was completely refurbished in our house and the fan was checked for its correct function. The extraction wall was completely cleaned and provided with new filter mats. Hint: Pipe components required for on-site operation can be requested from us. (Cha ...

This is an electric round cooking kettle from the premium manufacturer Electrolux/Therma, type PBON15EKEM (150 litres) from 2017. The appliance is suitable for cooking, steaming, poaching, stewing or simmering/simmering food. The boiler is equipped with a closed, non-refillable "electric steam heating system" (without replenishment from the water network). Heating is provided by an electric steam heater. Here the electrical energy is converted into steam, working pressure 1.5bar. The radiators are equipped with boil-dry protection. The heating capacity is divided into 4 heating levels with automatic transition from the boiling to the continuing cooking process by an energy-saving microprocessor control. Equipped with the therma touch control for permanent, easy-to-read display of target and actual values such as temperature, working time and power levels. This is a pedestal installation ...

Fiber laser machine YAWEI HLF with TOP equipment Laser power: 8kW Sheet size: 3000 x 1500mm automatic shuttle table Siemens touchscreen control with LAN/USB Sheet layer measurement Siemens Drives Precitec Auto Focus Procutter Cutting Head with Autofocus IPG YLS resonator with 8kW The machine will include "everything" 2 years warranty CAD CAM Software Libellula CUT Commissioning Delivery within Germany and Operator/software training offered. We even provide on-site support for unloading + insertion. The machine is a new machine and available immediately. An identical one can be tested at any time under power with us. In our showroom we have various laser machines from our manufacturers under power and various materials to test. We would like to invite you to send us your drawings or drawings. Cut your material. We have been the exclusive trading house and servi ...

Additional title: with whirlpool, Capacity: 150 hl/brew, Operation / Control: ProLeit / Siemens S7, Material: brew house vessels copper-covered, Features: mash/wort kettle, mash/lauter tun, hop addition, vapor condenser system, whirlpool, wort cooler, various pumps and fittings

Schäfer roller conveyor complete system Super bargain for self-dismantling in Neuss Logistics center with all conveyor belts, roller conveyors and spare parts. Over 3 floors Year of construction: 2008 The Schäfer roller conveyor system is a state-of-the-art conveyor system that has been specially developed for the efficient and precise movement of goods and products over several floors. With its robust design and intelligent control, the system offers a reliable and flexible solution for in-house transport in production facilities, logistics centers and warehouses. The roller conveyor system consists of a series of roller conveyors arranged horizontally and vertically to ensure seamless movement of goods between different levels. Through the use of individually adjustable rollers and different types of conveyor belts, the system can be adapted to the specific requirements o ...

Transformer with concrete shed. Prepared 430 Kvass, house measures: 7x3 m.

Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               Pneumatic do ...

Up to 100 products can be produced on one table. • automatic or semi-automatic production lines; • EU-standard; • Warranty 24 months. The tables are made of sturdy steel construction covered with steel plate. The service life of vibrating tables is up to 30 years. Tables can be equipped with hydraulic tilt function, built-in heating pipes and vibrators. The sizes of the tables can be ordered for the required panel sizes. SUMAB equipment for the production of interior and exterior wall panels includes: • various types of circulating and tilting vibration tables • turnkey house-building plants; • the possibility of full or partial reconstruction of old enterprises and the installation of modern equipment; • profitability of production, reduction of economic and production costs; • the optimal solution to start panel construction of high-quality and modern hous ...

Overview Most of the equipment, which belongs to this brewery, was manufactured in 2021 and 2022. There are several components which have never been used. The owner had purchased all the equipment to set up a micro brewery but then decided to shift the production of his beer to a bigger brewery, producing for him. Therefore all the equipment is for sale. List of components Manufacturer: Bühler AG Machine Type: malt mill Model: Smartgrist YOM: 2022 (used since February)   Manufacturer: Spadoni Machine Type: 25 hl brew house Model: RMB 2500 YOM: 2022 (not used yet) Capacity: 25 - 30 hl in one brewing process, two processes possible in ten hours   Manufacturer: ABC Perello Machine Type: steam generator Model: PMY - 12 YOM: 2022 (not used yet) Capacity: 1250 Kgv/h   Manufacturer: --- Machine Type: water softener Model: --- YOM: 2022 (used since January)   Manufacturer: Isma S.A. Machine ...

Hot water buffer tank with insulation Year of construction: 2011 Condition: Used Specifications Connections: 4 screw-ins for immersion sleeves: inner diameter 1/2" 2 flange connections: inner diameter 80 mm 1 filling neck: inner diameter 1 1/4" Metrics Height: 3,550 mm (boiler only) Diameter: 1,198 mm Circumference: 3,765 mm Volume: approx. 3,982 m³ Operating pressure: max. 4 bar Weight: approx. 500 - 600 kg Insulation: 160 mm The buffer tank has been reworked on the outside with rust protection and 2 coats of paint. Transport can be arranged through our house on request! Price: € 3,900.00 plus VAT ex Grunow site (Brandenburg) (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

This is a rectangular pressure cooker FER300 from Küppersbusch. The device is equipped with the innovative KCI touch panel control and has a low-maintenance, closed PERMAPRESS system. The cooking kettle is in top condition. The device has been tested in our in-house workshop, provided with predictive maintenance work and is fully functional. Contact us for your special offer! Our service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected • Expert advice - before and after the purchase • Provision of operating instructions, connection diagrams and spare parts •Testing according to DGUV V3 Technical details: •Dimensions WxDxH: 1600x850x900 •Weig ...

Transnorm curved belt Conveyor 45° links 670-500 IR1100 RA1083 The Transnorm curved belt is from 2017. It is as good as new (used) and fully functional. It has an engine of the brand SEW. Columns are not included in the scope of delivery. These are optionally available. curved belts are often used in intralogistics for in-house transport of piece goods and are indispensable for modern distribution centers. Transnorm curved belts convince with performance and reliability. Long operating times are no problem thanks to a low-voltage drive over the entire belt width. Conical drums and a specially developed belt guidance system ensure maximum smooth running. Technical data: Manufacturer: Transnorm Type: TS 1600-105 FH2 curved belt 45° links Built: 2017 Condition: as good as new (used) Engine: fully functional Angle: 45° Running direction: left Inner radius (IR): 1100 mm Nominal/out ...

The iCombi Pro is the latest combi steamer from RATIONAL. The iCombi Pro 10-1/1 Electric model with 10 shelves GN 1/1 is easy to use, even for unskilled personnel, as you can achieve outstanding food quality without the need for supervision. The device has been tested in our in-house specialist workshop and is fully functional. The undercarriage shown is not part of the offer, but can be purchased for an additional charge. The RRP. amounts to 15.090 € net The price quoted is net plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Our equipment service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional and competent advice - before and after the purchase •Free shipping within Germany (excl. islands/mountain stations) • Pr ...

Key data: 64 , 80 , 400

Execution: Aggregate type: transportable Execution: PTO generator Technical data engine: Engine manufacturer: Tractor Technical data generator: Generator manufacturer: Endress Generator type: EZG 80 / 4 IT / TN-S Generator power: 80 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Manual start Functions: Hand start Switch: Generator switch 4 poles Delivery: Built Dimensions of the PTO generator: Width approx. mm: 740 Height approx. mm: 1.007 Length approx. mm: 1.192 Weight approx. KG: 500 Stock number: 1372 Condition: New Year of construction: 2023 Delivery period: Instant Verl Hours: 1 Location: Verl - Germany Scope of delivery: PTO generator 80 kVA – Brushless with electronic voltage reg ...

Qty. 1 Second-hand brew house Mfc.: Spomax, Zumec, Alfa Laval, Zieman, Bartec & others Built: 1996 – 2015 Capacity: 400 HL x 12 brews / Day

Garden shredders, shredders, shredders -Suitable: for gardens, house, property and landscape maintenance -Chopping, mixing, processing in combined use -Drive: electric motor -Inlet: Ø 120 mm -Power: 0.9 kW -Speed: 2900 rpm -Weight: 30 kg

Very good condition sheet metal shear guillotine with little use https://www.baileigh/sheet-metal-shear-sh-5210 This hydraulic shear was one of the machines that got us started and built Baileigh’s quality reputation. With its welded steel frame, the SH-5210 sheet metal shear makes perfect cuts every time. 52” length. 10 gauge mild steel maximum capacity. Minimum capacity of 24 gauge mild steel. 5 hp motor runs on 220-volt single-phase power. Up to 28 strokes per minute. Adjustable 24” backgauge ensures precise repeatability. Front support arms and table guides keep the material square to the blade. 3 modes on the operator console: Inch mode: Jog the control and ease the blade down to the material. Single mode: Make one cut cycle per foot pedal push. Auto mode: Continue cycling as you hold the pedal down. This hydraulic shear comes standard with high ca ...

This is a CM (P) 61 combi steamer from the premium manufacturer Rational, in electric version, built in 2019. The device has undergone an extensive inspection in our in-house workshop and is fully functional. The undercarriage shown is not part of the offer, but can be purchased for an additional charge. The price quoted is net plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This device is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Our used equipment service for you: •6-month warranty on electrica ...