hot used for sale

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

Krones Solomatic Right-to-law machine Ma-No. 018-D53 Torso-chest back labeling Hot melt device for sealing labels Central lubrication Height GDB program + 0.75 / 0.25 excl. Gluing via lifting motor 2 label magazines 2 aggregates external control cabinet Heuft Spectrum TX with Pusher Format parts, gripper heads and screws available Krones Solomatic Right-hand machine Ma-No. 018-D53 Body-chest-back labeling Hot melt gluing device for sealing labels Central lubrication Height adjustment GDB program + 0,75 / 0,25 excl. Gluing via lifting motor 2 Label Magazines 2 aggregates external switch cabinet Heuft Spectrum TX with pusher Format parts gripper heads and screws available

(Schloemann) Beche DGH 40 Ton ( Revamped by Schuler group 2019) Manufacturer: BECHE (Schloemann) Type: DGH 40 YOM: Revamped 2019 Machine Number: 2412-HW Including 12 Ton Wellman manipulator Impact work: 40,000 mkg Total bar lift.:1.250 mm Maximum number of strokes:80 Pro Minute Average score: 6 Pro Minute Air consumption per ten blow Blow in . m in required air at the strongest hit: 6.8 Cold Air Compressor performance in m3/min: 41 Cold Air Compressor performance in m3/min:27 Hot air (160° C) Power requirement of the compressor in hp:260 Cold Air Power requirement of the compressor in hp:180 Cold Air Air tank capacity:30 m3 Steam consumption per hit with the strongest hit:3.5 kg Steam consumption per minute (saturated steam):21 kg Clear width between the guides: 1200 mm Maximum singing sounds: 2700 mm Lowest overall height of the dies without dovetail: 575 mm O ...

LIQUIDATION of washing machine of boxes and trays. Its condition is completely renovated, revised and guaranteed. Tunnel for washing trays or boxes, production 400/600 units / h. Manufacturer by INDUSTRIAL WASHING MACHINES LTD model CRUSADER 600. The tunnel is calculated and designed for a production of 400/600 ud / h, the water is heated by oil heating system, its washing phase with hot and soapy water, and its rinsing with mains water make its finish optimal. PROCESS Washing in closed circuit with hot soapy water. Rinsing with mains water. GENERAL CHARACTERISTICS Construction in stainless steel AISI 304. Tunnel dimensions: Length: 3,500 mm Width: 1,400 mm Height: 2030 mm Loading mouth 570 x 280 mm high (max. trays 600 x 400 x 280 mm). Loading height of 1,000 mm. Upper body with side hinges for registration and rounded shapes to facilitate sanitation and avoid water cross ...

Doka Frami panel formwork 335 m2 Handy and lightweight steel frame formwork for foundations, walls and columns. The lightweight Frami steel formwork with a robust, hot-dip galvanized steel frame is ideal for fast formwork with and without a crane. Quick and universal use thanks to many practical product details Cost-efficient due to excellent system properties Easy handling and planning thanks to a practical element grid Excellent concrete results due to particularly stable design Doka Frami Framed formwork 335 m2 Light and manhandled steel-framed formwork for foundations, walls and columns The lightweight Frami formwork, with its sturdy hot-dip galvanised steel frame, ideal for fast and, with or without a crane. Can be put to use quickly, anywhere thanks to its many practical details Cost-effective because of its outstanding system attributes Easy handling and plann ...

foil width: 1400 mm max. speed: 250 m/min Diameter of the holes: 0,3-2,8 temperature: 400 °C heating capacity: 37 kW Control: Touchscreen Perforation machine (Star_2) with unwinder and rewinder (MTX_03 touchscreen) Machine is new, used less than 100 hours. HOT MICROPERFORATORS = With the hot needle technique, the hole is created by the melting of the material caused by heated needles. The pin cylinders are mounted on a perforation roller. They are heated to a temperature of 400°C by special lamps. This technology creates homogeneous holes and was developed in the 1980s. An industry standard wiring closet system with Wifi modem (purchased separately and configured), for wireless connection to any existing inline production system. User-friendly and multilingual control panel with additional buttons/knobs for manual operation. Intelligent Web Guidance System : For precise control over p ...

CLEARANCE of high-speed drawing line, for hot dogs and sausages cooked in cellulose or collagen casing. Manufacturer: HANDTMANN, model: FPVLH 242. The FPVLH 242 consists of the following functional modules: Module Support, Travel Unit, Suspension Unit and this all powered by a vacuum stuffer NOT INCLUDED. The FPVLH 242 is excellent for mono productions of cooked sausages and hot dogs in cellulose and collagen casing, and offers maximum yields of up to 3000 servings per minute. With integrated vane rotor The FPVLH 242 ensures cooked sausage products with maximum portioning precision and exact lengths thanks to the patented weight-compensated Handtmann vane rotor. Its impeccable condition. Equipment overhauled, rebuilt and warranted. OCCASION. NEGOTIABLE PRICE. Transport costs to be borne by the buyer.

Carton erector, Bedo – second-hand - : Price from location: 29.500.- € (net)! Manufacturer: Bedo Type: VA 1195 Year of construction: 2006 two cardboard magazines Machine number: 1195.1.6684 400V/3PN/ 50Hz Control voltage: 24V 14.2 A Compressed air: 5- 7 bar With Nordson ProBlue 4 Adhesive Melter 4 Litre Hot Melt Glue Condition: good Available: from approx. Mid-January 2024 Location: Hanau area Manufacturer's text: Series 11 up to 20 cartons per minute Folding crates according to FEFCO 0201, 0200, 0209 and others all types of corrugated board Carton closure by means of hot melt glue, self-adhesive tape or gummed tape small to very large carton formats one or two cardboard magazines motoric/pneumatic mode of operation no format parts

Convotherm OES 10.10 combi steamer electric - with base - Disappearing door - door disappears to the side of the damper when opened 10 bays GN 1/1 Functions: Steam, Combi Steam, Hot Air Crisp&Tasty USB interface integrated in the control panel Standard equipment Steam (30-130°C) with guaranteed steam saturation Combined steam (30-250°C) with automatic Humidity adaptation Hot air (30-250°C) with optimized Heat transfer easyDial control panel Digital Display Regeneration Function ProductsRegenerate 99 cooking profiles, each with up to 9 steps Multi-point core temperature sensor Door handle with safety lock, preheating and cool-down function Metrics: Height with base: 182cm x Width:94cm Door pushed to the side: 103cm x Depth:82cm + 8cm handle Device is fully functional Contacts for personal arrangements: Mr. Avanesyan +49 176 56358605, Mr. Oswald +49 176  ...

Box closing machine MONDO&SCAGLIONE – hot melt Year: 2002 Speed: 2.300 c/h Model: Incollatore CRC SUPER. Closing box with hot glue. Fuser and PREO glue system. Safety protections.

2 x Carton erector, Bedo, VA 1295 – second-hand - : Price ex location: now only 22.500.-€ instead of 32.500.- € (net)! Manufacturer: Bedo Type: VA 1295 Year of construction: 2008 Machine number: 1295.1.6911/ 1295.1.6912 With two magazines 400V/3PN/ 50Hz Control voltage: 24V 14.2 A Compressed air: 5- 7 bar with Nordson ProBlue 4 adhesive melter 4 liters hot melt glue Condition: good Available: now Location: Hanau area More photos on request! Manufacturer's text: Series 12 up to 40 cartons per minute Folding crates according to FEFCO 0201, 0200, 0209 and others all types of corrugated board Cardboard closure by means of hot melt glue, self-adhesive tape or wet adhesive strips small to very large carton formats one or two cardboard magazines Fully motorized way of working no format parts

2x Carton Sealer, Lid Sealer, Bedo, VA 7005 – second-hand - : Price per piece ex location: now only 9.500.-€ instead of 14.950.- € (net)! Manufacturer: Bedo Type: VA 7005 Year of construction: 2006 Machine numbers: 7005.2.6685 / 7005.2.6686 / 400V / 3PN / 50Hz 17 Amp. 5-7 bar Length: approx. 5,80m Condition: good with Nordson ProBlue 4 adhesive melter 4 liters hot melt glue Available: now Location: Hanau area and 2 pcs Carton Sealer, Lid Sealer, Bedo, VA 7805 – Used - : Price per piece ex location: now only 9.500.-€ instead of 14.950.- € (net)! Manufacturer: Bedo Type: VA 7805 Year of construction: 2007 and 2010 Machine numbers: 7805.1.6836 / 7805.1.7015 400V / 3PN / 50Hz 17 Amp. 5-7 bar Length: approx. 5,80m Width: approx. 1.75m Height: approx. 2.60m Condition: good with Nordson ProBlue 4 adhesive melter 4 liters of hot melt glue  ...

Bottling line isobaric PET/glass Year: 2000 - 2013 Speed: PET: 6.000 bph Vetro: 8.000 bph Blower SIAPI - 2000 Preform tilter – 2012 ZECCHETTI air conveyors – 2000 Depalletizer SYMPAK - 2003 Filling monoblock BC 42.50.10 – 2000 Ozonator – 2000 Caps elevator – 2000 Deareator and Saturator BC– 2000 Labeller KOSME cold glue and hot melt for glass – 2000 Labeller P.E. hot melt for PET - 2003 Bottle inspector (cap level label) – 2000 Inkjet VIDEOJET – 2013 Devider (1 to 2 rows) – 2003 Shrink wrapper DIMAC – 2000 Handler TWINPACK – 2000 Wraparound DIMAC – 2003 Box conveyors - 2003 Palletizer KEBER – 2000 Pallet wrapper – 2000

Bottling line isobaric PET/glass • Year: 2000 - 2013 • Speed: o PET: 6.000 bph o Glass: 8.000 bph • Blower SIAPI - 2000 • Preform tilter – 2012 • ZECCHETTI air conveyors – 2000 • Depalletizer SYMPAK - 2003 • Filling monoblock BC 42.50.10 – 2000 • Ozonator – 2000 • Caps elevator – 2000 • Deareator and Saturator BC– 2000 • Labeller KOSME cold glue and hot melt for glass – 2000 • Labeller P.E. hot melt for PET - 2003 • Bottle inspector (cap level label) – 2000 • Inkjet VIDEOJET – 2013 • Devider (1 to 2 rows) – 2003 • Shrink wrapper DIMAC – 2000 • Handler TWINPACK – 2000 • Wraparound DIMAC – 2003 • Box conveyors - 2003 • Palletizer KEBER – 2000 • Pallet wrapper – 2000

LINK LABEL HOT FOIL STAMPING – SEMI ROTARY DIE CUTTING – LABEL FINISHING LINE Manufacturer: Link Label – Taiwan Year of Production: 12/ 2015 Type: ASR 320 D Max. Paper Width: 320 mm Max. printt length: 300 mm Max print width: 300 mm Max roll diameter: 500 mm Machine is servo driven – in production – Test possible Machine consist of: Unwinder with El Guider Web guide Hot foil stamping and embosing unit (flatbed) Flexo varnishing/printing unit (semi rotary) Screen printing unit (flat bed) Automatic Register control Equipped for Re Register Slitting unit UnwinderWaste RewinderScreen printing unit is also a Standalone unit. Please contact us for pricing or other information

Laminating machine / hot & cold Make SEAL Model Image 600-S Year 2010 Maximum width 1550 mm Maximum thickness 25,4 mm (incl the film itself) Details single sided lamination, hot and cold Production output 3.1 meters per minute Available direct

WOHLENBERG QUICKBINDER -Year 2001, Colour touch screen monitor -Automatic perfect binding machine with 5 clamps -Hot-melt spine and hot-melt side glue tanks with premelters -Automatic cover feeder with creasing devices, suitable to load covers with flaps (also not glued) -Solema belt delivery connected in flow line with the three knife trimmer Horizon HT 70 -Maximum size: mm. 430 x 320 x 70 mms -Max mechanical speed 2.000 cycles/hour HORIZON HT 70 -Three knife trimmer Year 2001 -Quick set changings -Max trimmed size: 330 x 330 mm -Format the finished book Min. : 100 x 142 mm -Maximum cutting thickness: 50.8 mm -Speed max: 1000 cycles / hour -Solema pre-stacker -Solema belt delivery connected in flow line with the perfect binder Wohlenberg Quickbinder -Installed power: 3,0 kW - Power supply voltage: 400V, three phase, 50 Hz -Dimensions: 2260 (L) x 1160 (D) x 1600 ...

Perfect binder line WOHLENBERG GOLF 370 consist of: Gathering machine WOHLENBERG SPRINTER 7000 1994.year 16 automatic station with double and mis control (4 unit x 4 station) hand feed station criss-cross delivery pumps, documentation conected to Binder WOHLENBERG GOLF 6000 1994. year Max size of book 370 x 320 x 50 mm opticontrol for book size on enter proces vibrator for book block milling and rughering station extraction sistem with 2 bags hot melt side unit with 2 disc hot melt spine unit with 2 rolers PUR melt spine unit with 2 rolers and PUR Nordson melter 20 kg PUR station for cleanig cover feeder with duble and mis sensor control 15 clamps 1 x press station for conection of cover and bookblock 2 x press station for forming spine and side of book delivery table pumps, spare parts, dokumentation ...

Reference ID PP-39952 Category 6-Colors Manufacturer Heidelberg Model CD 102-6+LX2 Year Built 2015 Color 6 Impression 118 Working Hours - Speed 15000 sheets/h Max. Size 710 x 1020 mm Min. Size 340 x 480 mm Condition Good Location Europe Availability Immediately Machine Description 6 colors and varnish Prinect Press Center Compact - control console Preset Plus feeder All cylinders use new technology of special compact bearings Digitally controlled Alcolor thin-film dampening unit Chambered blade system with features that enable replacing anilox rollers with One Anilox roller: 10 cm3/m2 (120 lines/cm), Chrome-plated blanket cylinder with a 3.2 mm undercut, Chrome-plated double-diameter pressure cylinder, Preset Plus X2 delivery Device for automatic washing of rubber blankets (brush system), pressure cylinders (brush system) and inking rollers CombiStar Compact Dr ...

This is a combi steamer from the manufacturer Rational, type CM 61 in electric version. The pictured base is not part of the offer, but can be purchased as an option. The combi steamer has been overhauled in our in-house workshop and the device is fully functional. Our used equipment service for you: •3 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected • Expert advice - before and after the purchase • Provision of operating instructions, connection diagrams and spare parts •Testing according to DGUV V3 Modes: •Hot air 30°C to 300°C •Combination of steam and hot air 30°C to 300°C •Vario steaming at 30°C to 99°C •Finishing •Steaming at 100 ...

Liebherr Betomix 2.0 Z, capacity 90 cbm/h, mixer type Liebherr RIM 2.0 with ceramic tiles and rotor was overhauled in 2022, SPS RIEGER DIDO WIN, Mesomatic displays installed in a container, storage tower 240 t capacity with 6 boxes, 2 x 80 t cement silo, 1 x 100 t cement silo, 1 x 100 t double chamber silo, elevator with feed hopper, Hot air heating and hot water preparation KROLL, etc

Other Info: Equipped with forming roll radius 350 head Euipped with turning cutting attachment  Machine for making smooth surface dished and flanged ends. Designed for cold & hot forming such as: ASME 2:1 Elliptical Dished only Hemispherical ASME Flanged & Equipped with forming roll radius 350 head Euipped with turning cutting attachment  Machine for making smooth surface dished and flanged ends. Designed for cold & hot forming such as: ASME 2:1 Elliptical Dished only Hemispherical ASME Flanged & Dished     Max. workpiece:        4000Ø Maximum sheet thickness:18mm Max. dishing radius:   350mm Min. product Ø:        400 Min. plate thickness:  3mm Min. dishing radius:   30mm Length:                5000mm Wid ...

Boiler capacity: 270l; Flow rate: 520l/min; Motor power: 4 kW; Refrigerant dryer: Yes; Stationary compressors with vertical 270 l tank Maximum performance in the tightest of spaces. Robust equipment and best quality Fully automatic on-switch operation With all safety devices Completely ready for connection  From 7.5 kW as standard with automatic star-delta switch  Fifteen-year warranty against rust penetration on inside and outside hot-dip galvanized compressed air tank quality electric motor Quality electric motor with high tightening torque is equipped with a motor protection switch start-up capacitor and start-up relief valve ensure easy start standard with phase changer for easy manual reversal of direction of rotation compressed air compression via high-performance unit HOS Start-up relief valve ensures easy, pressure-free start The two-cylinder high-performance engine made ...

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

The scope of delivery includes: 01x Stacking rack, used Material color: hot-dip galvanized overall width: approx. 1,550 mm Usable width: approx. 1,300 mm total depth: approx. 1,180 mm Usable depth: approx. 925 mm total height: approx. 1,150 mm Usable height: approx. 975 mm Frame height: approx. 300 mm Underride height: approx. 110 mm Frame profile: approx. 60 x 30 mm Stackable: yes ( see images ) Driveable: 4 sides Total weight / pcs.: approx. 59,380 Kg Bottom Material: Silk Screen Printing Plate 04x Round tubes, used Material color: hot-dip galvanized Round tube length: approx. 1,100 mm Round tubeØ: 60 mm Note: The funnel-shaped feet make the racks easy to stack. The round tubes are removable, which means that the frame can be stored in a space-saving manner. Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver ...

The scope of delivery includes: 03x Stacking racks, used Material color: hot-dip galvanized overall width: approx. 1,550 mm Usable width: approx. 1,300 mm total depth: approx. 1,180 mm Usable depth: approx. 925 mm total height: approx. 1,150 mm Usable height: approx. 975 mm Frame height: approx. 300 mm Underride height: approx. 110 mm Frame profile: approx. 60 x 30 mm Stackable: yes ( see images ) Driveable: 4 sides Total weight / pcs.: ca.178,140 Kg Bottom Material: Silk Screen Printing Plate 12x round tubes, used Material color: hot-dip galvanized Round tube length: approx. 1,100 mm Round tubeØ: 60 mm Note: The funnel-shaped feet make the racks easy to stack. The round tubes are removable, which means that the frame can be stored in a space-saving manner. Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General  ...

The scope of delivery includes: 05x Stacking racks, used Material color: hot-dip galvanized overall width: approx. 1,550 mm Usable width: approx. 1,300 mm total depth: approx. 1,180 mm Usable depth: approx. 925 mm total height: approx. 1,150 mm Usable height: approx. 975 mm Frame height: approx. 300 mm Underride height: approx. 110 mm Frame profile: approx. 60 x 30 mm Stackable: yes ( see images ) Driveable: 4 sides Total weight / pcs.: approx. 59,380 Kg Bottom Material: Silk Screen Printing Plate 20x round tubes, used Material color: hot-dip galvanized Round tube length: approx. 1,100 mm Round tubeØ: 60 mm Note: The funnel-shaped feet make the racks easy to stack. The round tubes are removable, which means that the frame can be stored in a space-saving manner. Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German Gene ...

The scope of delivery includes: 08x Stacking racks, used Material color: hot-dip galvanized overall width: approx. 1,550 mm Usable width: approx. 1,300 mm total depth: approx. 1,180 mm Usable depth: approx. 925 mm total height: approx. 1,150 mm Usable height: approx. 975 mm Frame height: approx. 300 mm Underride height: approx. 110 mm Frame profile: approx. 60 x 30 mm Stackable: yes ( see images ) Driveable: 4 sides Total weight / pcs.: approx. 59,380 Kg Bottom Material: Silk Screen Printing Plate 32x round tubes, used Material color: hot-dip galvanized Round tube length: approx. 1,100 mm Round tubeØ: 60 mm Note: The funnel-shaped feet make the racks easy to stack. The round tubes are removable, which means that the frame can be stored in a space-saving manner. Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German Gene ...

The scope of delivery includes: 10x stacking racks, used Material color: hot-dip galvanized overall width: approx. 1,550 mm Usable width: approx. 1,300 mm total depth: approx. 1,180 mm Usable depth: approx. 925 mm total height: approx. 1,150 mm Usable height: approx. 975 mm Frame height: approx. 300 mm Underride height: approx. 110 mm Frame profile: approx. 60 x 30 mm Stackable: yes ( see images ) Driveable: 4 sides Total weight / pcs.: approx. 59,380 Kg Bottom Material: Silk Screen Printing Plate 40x round tubes, used Material color: hot-dip galvanized Round tube length: approx. 1,100 mm Round tubeØ: 60 mm Note: The funnel-shaped feet make the racks easy to stack. The round tubes are removable, which means that the frame can be stored in a space-saving manner. Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German Gene ...

The scope of delivery includes: 60x stacking racks, used Material color: hot-dip galvanized overall width: approx. 1,550 mm Usable width: approx. 1,300 mm total depth: approx. 1,180 mm Usable depth: approx. 925 mm total height: approx. 1,150 mm Usable height: approx. 975 mm Frame height: approx. 300 mm Underride height: approx. 110 mm Frame profile: approx. 60 x 30 mm Stackable: yes ( see images ) Driveable: 4 sides Total weight / pcs.: approx. 59,380 Kg Bottom Material: Silk Screen Printing Plate 240x round tubes, used Material color: hot-dip galvanized Round tube length: approx. 1,100 mm Round tubeØ: 60 mm Note: The funnel-shaped feet make the racks easy to stack. The round tubes are removable, which means that the frame can be stored in a space-saving manner. Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German Gen ...

Heating hose, glue melter, glue machine, hot glue machine, industrial hot glue gun -Type: FE-NW-2.4-8-N10 -Connection: 230 V 50 Hz 310 W -Heating power: 200 °C -Weight: 2.5 kg

Heating hose, glue melter, glue machine, hot glue machine, industrial hot glue gun -Type: FE-N-2.4-8-1U120 -Connection: 230 V 50 Hz 320 W -Heating power: 200 °C -Weight: 2.5 kg

Heating hose, glue melter, glue machine, hot glue machine, industrial hot glue gun -Type: S/N TA06M00018 -Connection: 240 V 224 W -Max. Pressure: 1500 PSI -Weight: 2.5 kg

Heating hose, glue melter, glue machine, hot glue machine, industrial hot glue gun -Type: FE-H/PN2-1.8-13-PT100 -Connection: 230 V 50 Hz 320 W -Heating power: 200 °C -Total length: 2000 mm -Weight: 3 kg

Sumbel Herald 500; good condition; cleaned and tested; Working width 500mm; suitable for hot or cold glue. Sumbel Herald 500; good condition; cleaned and checked; working width 500mm; used for hot or cold glue.

Rotary UV Flexo label press - Nine Colour Make Mark Andy Model XP5000 Year 2006 Running hours +/- 12.800 hours Maximum width 480 mm Number of units 9 flexo printing units Register by BST camera control Lamination wet and dry lamination station UV-dryer GEW E Brick, 5 powerunits, 10 lamps Hot air drying 9 hot air dryers Corona treatment 1 Corona treatment unit Printing cylinders: Full set Anilox rollers: 28 Anilox rollers ranging from 300 to 1200 LPI Details Die cutting station with 1 set of cilinders Chiller unit

HORIZON BQ 470 COUNTER: 3.2M REFURBISHED IN: 2022 TECHNICAL SPECIFICATION FULLY AUTOMATIC 4 CLAMP PERFECT BINDER EVA GLUING SYSTEM HAND FEEDING STATION MILLING SPINE HOT GLUING SIDE HOT GLUING COVER FEEDER NIPPING DELIVERY TECHNICAL DETAILS: MAX. SIZE: 320 X 320 X 65 MM MIN. SIZE: 145 X 150 X 1 MM COVER SIZE: MIN.: 225 X 135 MM, MAX.: 660 X 320 MM PAPER THICKNESS: MIN. 80G/SQM, MAX. 300 G/M2 SPINE MILLING: MAX. 3 MM SPEED: MAX. 1,000 BOOKS/H

Bottle washing Klinger Type: Winzer Meister 8/1/50 Capacity: 1.200 - 2.000 bph stainless steel machine heating system through hot water incl. Viessman Paromat Triplex hot water system incl. label removal system, year of manufacturing: 1994 The machine was reconditioned in 2020 and it is still in production in Germany

Vötsch VT 7012 S2 Thermal shock test chamber Thermal shock test chamber Two-chamber design The temperature control of the hot chamber ranges from +50 °C to +220 °C (optionally up to +250 °C), that of the cold chamber from -80 °C to +70 °C. Test chamber volume 125 l Temperature range hot chamber +50 °C to +220 °C Temperature range cold chamber -80 °C to +70 ° Regulation and control: Controller board with detachable color panel Type: VT 7012 S2 More items - new and used - can be found in our shop! International shipping costs on request!

• Automatic operation, product feed horizontal, box feed vertical • Folding box format range w 15-140 x h 10-70 x l 45-160 mm depending on format inserts (data not binding, exact statement after receipt of customers folding box sample) • for both sides flap closure by hot glue with hot melt device Nordson ProBlue 4 • Output max. 55 cycles/min • Product infeed conveyor with grouping and stacking station for small carton in infeed direction w 22 x h 9 x l 70 mm, other product infeeds possible at extra cost • Embossing unit for flap opposite insertion side with 2-line embossing stick • Outfeed conveyor with stacking chute for filled folding cartons • Available format sets for folding box sizes w 75+70, h 21+12 mm (depth adjustable without format) • Teachbox for checking the function of the closing tools • PLC Siemens S7-300 CPU 314 with operator terminal Siemens ...

Food extrusion product coating, drying and cooling line SCHAAF TECHNOLOGIE GMBH TYPE 318 COATING DRUM 1600 For the application of various taste and aroma giving materials by using various aromatising techniques. The special drum profile offers the following main advantages: - optimal Rolling of the product for uniform coating - minimum possible friction/damage of the product surface - no hidden corners, easy to clean, bacteriologically optimal surface. Adjustable drum speed, by frequency controlled AC gear motor 1.5 kW. Drum diameter: 1600 mm Drum length: 4000 mm Drum height: 3270 mm TYPE 284 DRUM DRIER/ROASTER 1600 PTFE Newly developed short and medium range infrared roaster for special thermal post treatment of expanded extrudate. The whole drum is coated with a low-wear PTFE layer. This ensures processing of extremely sticky coated extrudates. Unlike the conve ...

Qty. 1 Second-hand carton forming machine Mfc.: STORK Bepak B.V. Type: S.A.-25 – 0.25, 0.5, 07 L Built: 1998 Possibility to form corrugated cardboard boxes in a wide range of dimensions. During transport from section B to C, a hot melt adhesive applicator (Nordson USA) (granules or flakes) applies heated hot melt adhesive under high pressure in the form of strips to the vertical folds of the bottom of the carton. Capacity: 25 cartons/min Installed power: 8 kW Technical assessment: complete device, technically efficient. Price: EUR 49,500.00 As is where is!

Carton erector, Lantech – second-hand - : Price from location: 22.500.- € (net), dismantled, packed and loaded! Manufacturer: Lantech Supplier: Bang & Co Type: Case Eroctor Model: C-2000-Hotmelt Machine number: SM20144342 Year of construction: 2014 400V, 3L+N+PE, 50Hz,4,52kW 6 bar with Nordson ProBlue 4 adhesive melter 4 liters hot melt glue Condition: good Available: from approx. Mid-January 2024 Location: Hanau area Manufacturer's text: 25 cartons per minute with speed option Adhesive Tape, Hot Adhesive, flash / snap bottom closure

⦁ Station No. 1 Charger for cardboard packaging with packaging remover from the charger ⦁ Station No. 2 Box former ⦁ Station No. 3 Station for inserting products ⦁ Station No. 4 System of closing boxes with sticky hot glue ⦁ Station No. 5 Closing the box ⦁ Station No. 6 Exit conveyor -The system of closing the box with hot glue is carried out using the device of the Italian manufacturer "Preo".

Heating hose, glue melter, glue machine, hot glue machine, industrial hot glue gun -Type: 2314 -Connection: 220 V 210 W -Heating capacity: -Total length: 1500 mm -Price: per piece -Number: 2x available -Weight: 2.2 kg

Qty. 1 Second-hand extrusion press line Mfc.: SMS Schloeman, Junker, Allen Bradley Type: Direct press Built: 1987 Force: 2800 MT Billet dia.: 228 mm – 9” Length: 250-1000 mm Consist of: Logs Loading Table Logs Furnace Hot Shear Induction Heater Extrusion Press Pullers (2) Quenching Unit Hot Saw Run-out Table Stretcher Finishing Saw Aging Oven

Leonard monofilament yarn line with winder 160 position. Full rebuild in very good condition Construction year 1990 but many parts have changed brand new . With bicon bobbin for winder. Ready to operate. The line is COMPLETE EXTRUDER with die 2 pieces extra Hot water bath 3 set godet roller Hot oven Winder 160 bobbin 1500 plastic bobbins extra Dosing simple It is READY TO PRODUCE The line can produce PP and PE

In connection with the closure of the production, we are implementing an automatic filling / capping unit for soft drinks SEITZ ENZINGER NOLL 40/8, made in Germany. Productivity 8000 bottles / hour. The filling unit SEITZ ENZINGER NOLL includes -40 bulk cranes The capping unit includes -8 capping heads for A4 caps (plastic) The automatic candy bar is designed for cold and hot bottling of drinks - wine, port, etc. Wine packaging, corking of wine bottles, packing of port wine, corking of port wine, hot filling, vacuum filling.