hot used for sale

Hot runner controller - PSG Year of construction: Location: Lodz, Poland Description: 6 hot zones with wiring All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - Ewikon Year of construction: Location: Lodz, Poland Description: 6 hot zones with wiring All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner control unit - Ewikon (12 pcs.) Year of construction: Location: Lodz, Poland Description: 12 hot zones with wiring All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - Mold Masters M1-24-24 Year of Make: 2016 Location: Lodz, Poland Description: 24 hot zones with cabling All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - Mastip TC5 100-12-H-DHB-C-03 Year of manufacture: 2018 Location: Lodz, Poland Description: 12 hot zones with wiring All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - Gammaflux (5 pcs.) Year of construction: Location: Lodz, Poland Description: 6 hot zones with wiring All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Hot Runner Controller - Husky Altanium X-c-12-NEO2-12 Year of construction: Location: Lodz, Poland Description: 12 hot zones with wiring Touchscreen All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - JETmulti 32 Year of construction: Location: Lodz, Poland Description: 32 hot zones with wiring All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Hot melt / melter for packaging industry for sealing cartons ProBlue 4 1022230A Serial Number: SA06C26938

Type: FLC8000/600 Serial number: 371 Year of construction: 2004 Belt width: 600 mm Cooking length: 7000 mm Heating: thermal oil, 180kW Steam: 4 - 8 Bar Cooking time: 2 - 40 min Compressed air: 6 - 10 Bar Power: 3 x 415V, 50Hz, 13kW Dimensions: 9800 x 2000 x 3150 mm Weight: 5850 kg With extra infeed conveyor of 1800 mm Including CIP tank and Bartec hygrophil Switchcabinet separate, not connected to the machine With optional outfeed conveyor of 1500 mm

Built in 1993 semi-automatic hot stamping press Embossing format max. 125 x 280 mm electr. Drive 1 foil preference 1 heating plate automatic feed Unwinding device for round materials / cans Underframe Delivery date: immediately from stock Price on request. We supply and install worldwide.

Hot stamping hand lever press, embossing foils, silver gloss and gold luster among others are included Note: The operating hours are unknown. The entry 99999 hours is only pro forma and does not correspond to the actual hours

An OTT heating plate press is available. Pressing area X/Y: 2250mm/1200mm, heating plates: 2, connected load: 14kW, pressing force: approx. 65t, max. pressing height: 300mm, machine dimensions X/Y/Z: approx. 2600mm/1350mm/1800mm, weight: approx. 3300kg. An on-site inspection is possible.

CONTROLS   PLC SIEMENS S7 300 PRESS DESIGN   drive system: hydraulic PRESS FORCES   total force (nominal): 800 to PRESS TABLE   table surface (left-right): 2600 mm   table surface (front-back): 2000 mm   height above floor level: 540 mm SLIDE   stroke: 900 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 460 mm/s   working velocity min.: 25 mm/s   working velocity max.: 44 mm/s   return velocity max.: 460 mm/s TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1700 mm ELECTRICAL SPECIFICATIONS   total power consumption: 180 kW DIMENSIONS / WEIGHTS   total weight approx.: 95000 kg ATTACHMENTS (PRESSES)   press automation: yes   gripper transfer system: yes   acc. to actual accident protection ...

VAN DEN BERGH FOIL-WIZARD (Hot foil stamping) INCL. ROLL UNWINDER HUNKELER S. No.: 02048020376 Equipment / Additional information: Incl. ROLL UNWINDER HUNKELER RW4-HS 7121 (M. No.: 1509697 // Age: 2004) With transfer station LCM 7084 (M. No.: 659595/2 // Age: 2001)

SPECIFICATIONS: Heating capacity: 928 kW - 800,000 kCAL/h Maximum operating pressure: 2 bar Fuel: wood waste Electrical power: 10.6 kW COMPLETE WITH: -Damper flap - Chip hopper - Safety thermostat - Operating pressure gauge - Motor variator - Combustion air blower - Spiral screw - Electrical control cabinet - Burner (EcoFlam MAIOR P 35 TL)

Sacot CA plank stacker. SCA. SAWMILL 1400 A professional stacker designed for automatic stacking of boards into even, stable and repeatable stacks. An ideal solution for sawmills and wood processing plants, significantly increasing efficiency and comfort of work. TECHNICAL PARAMETERS Stacking Material Length: 770-1400mm Stacking width: 1200 mm Stacking height: 1250 mm Machine dimensions: 4600 × 3700 × 2600 mm (H) Feeding/Receiving: Roller Receiving Table Structure: Steel, Industrial, Heavy Duty Control: Electric + Pneumatic The stacker is perfect for: sawmills, wood processing plants, production lines, production of short and medium elementsEXPANSION OPTIONS (optional): a complete technological line, including: Weinig Hydromat 23c planer 60m/min SACOT Formatizer SACOT stacker

Used hot air generator with oil burner Ready for operation at the site

TWO HHS HOT GLUE SYSTEMS to install on any folder gluer or any similar machine- from 1 to 4 glue points- years 2001/2006- Programmation- without guns- Price: 1.000 euro each LOT.

400 Ton Hydromec HF4000 Non-Ferrous Hot Forging Press Line MANUFACTURER – HYDROMEC YEAR – 2000 SERIAL NUMBER – 660 MODEL – HF4000 C/D MATERIAL – NON-FERROUS TONNAGE – 400 TON (4000 KN) STROKE – 380MM STROKE PER MINUTE (CONTINUOUS) – 22-35 STROKE PER MINUTE (SINGLE STROKE) – 22-45 RAM ADJUSTMENT RANGE – 100MM CLEARANCE (STROKE TO BOTTOM, ADJUSTMENT TO TOP) – 865MM SIZE OF TOOL MOUNTING PLATE – 1000MM X 1000MM MAIN PRESS MOTOR – 59 KW MAIN MOTOR RAM ADJUSTMENT – 2.2 KW CUSHION FORCE – 70 TON (700 KN) CUSHION STROKE – 40 – 110MM INCLUDES: AUTOMATED PICK AND PLACE ROBOT FULLY AUTOMATED SLUG LOADING STATION WITH FURNACE/CONVEYANCE MAESTRI C.T. 3500 4 TRACKS SLUG FURNACE (NEW 2000) , 420 KW POWER. NATURAL GAS, 950 DEGREES CELCIUS ELECTRICS PRESS CONTROLS VIRTUAL WALK Combination Lot of the following: Lot No. O233 MAESTRI Gas  ...

M. No.: 46131 Equipment / Additional information: Stamping surface with heating head: HKAC max. 100 x 125 mm // HKBC max. 140 x 230 mm Stamping pressure at 6,5 bar with: 1 Zylinder ca 400 daN (kp) // 2 Zylinder ca 800 daN (kp) Readjustable stroke, dep. on pressure producer: 0-40 mm / 0-100 mm Max. passage height without/with sliding table: 300 mm / 275 mm Readjustable foil advance: 0-230 mm Max. foil width: 140 mm Heating voltage: 220 V / 50 Hz Heating capacity with heating head: HKAC 540 W // HKBC 900 W Temperature measurement by means of: Fe-Ko Max. output, hourly cycles: ca 4000

INDUSTRIAL TUMBLER DRYER MACHINE DE CROWN SST-200 BODY MATERIAL: STAINLESS STEEL SUS304/MILD STEEL. CAPACITY (MAX.WET) : 90KG DIMENSION: 2050mm(L) x 1800mm(W)x2200mm(H) POWER SUPPLY: 415VAC 3PH 50HZ. DRUM DIMENSION: 1480mm (OD) x 990mm(L) DRUM SPEED: 29 RPM. CONDITION : MOTOR DAMAGED NEED TO REPLACEMENT THE NEW MOTOR

TECHNICAL DATA: Power consumption: 1 kW Working temperature: 470 °C Ideal for use on wood

TECHNICAL DATA: Power consumption: 2.5 kW Working temperature: 470 °C Operating pressure: 5 bar Ideal for use on wood

A fully automatic hot stamping press Oropress for gold and silver hot stamping is available. Press force: 5t, sliding table dimensions X/Y: 250mm/250mm, die dimensions X/Y: 120mm/200mm, max. operating temperature: 250°C. A rotary switch of the machine is missing and the adjustment is carried out using a screwdriver. One tension roller was repaired with a new flange bearing. Including foil feed unit. An on site inspection is possible.

Continuous tunnel cooler with short heat-holding section, make Steiner, type TP 900/5000, year of manufacture 2012, for the continuous pasteurization/cooling of hot-filled products, such as jam, marmalade, dips, seasoning sauces or spreads in jars,, Usable belt width: 900 mm,, Usable tape length: approx. 5,000 mm,, Adjustable throughput times: 11.26 - 49 minutes,, Nominal throughput time: 29 minutes,, 4 circulation pumps (1.1 kW),, Holding zone (5min), 3 cooling zones (each 8 minutes),, Max. container throughput height: 220 mm,, energy consumption at cont. Operation: approx. 70 kg steam / h,

Melton hotmelt adhesive appllicating system.

Gas-powered, power 10.5 kW, output 9. 000 kcal/h, never used Overall dimensions: 500 x 200 x 200 mm Weight: 5 kg Auction-ID: A7-44803-273

with original HDM hot foil stamping device

with original HDM hot foil stamping device

1.0 St. gebr. Temperature control unit with 48 control stations Manufacturer: GAMMAFLUX Type: GS1G030F024S4EJ Year of Make: 2019

diameter range 200 mm max. outside dia. of round pieces 200 mm kind of heating 200 KVA

diameter range 110 mm max. outside dia. of round pieces 110 mm kind of heating 335 KW

diameter range 64 mm max. width across flats 56 mm max. outside dia. of round pieces 64 mm bar dia. 18-40 mm cutting length 20-72 mm output - pieces/min 140 number of forming stations 3 press power 230 t

Used for applying numbers on materials using heat stamping. Auction-ID: A7-45167-17

Format : 73 x 104 cm (29”x 41”) Spiess feeder with pre-marge Front and side detection cells PC Control panel 3 x advances 2 x honeycombs straightened 2 x new honeycomb frames 2 x new heating units Air-conditioned electronic cabinet

Used for applying numbers on materials using heat stamping. Auction-ID: A7-45167-19

Hot stamping machine designed for applying logos, markings, or designs onto leather and shoe components using heat. Auction-ID: A7-45167-15

Overview The labeller was built in 2009 by Italian manufacturer PE Labellers. The machine is in a good condition, already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 12.000 bph Adapted for: 1.0L and 1.5L Working sense: entry left – exit right (counter-clockwise) Number of labelling heads: 12 Label position: wrap-around  Label material: OPP with hot melt Machine drive: Siemens S7 Bottles processed & format tools incl.: 0.25L – 0.50L – 1.0L

2 x Laboratory hot plate stirrers Auction-ID: A1-45187-143

2 x Laboratory hot plate stirrers Auction-ID: A1-45187-146

Temperature controller, tempering device, temperature control device, modular tempering device, tool heating, hot runner control device -Manufacturer: Ewikon, temperature control unit hot runner control unit -Type: 66010.100D -Power: V:625 VA / 230V: 3 kVA -Transport dimensions: 450/350/H230 mm -Weight: 15 kg

Brand: Cold master Type: Vista Stainless steel: Yes Electric connection: 230 V Total dimension L: 70 mm Total dimension W: 65 mm Total dimension H: 51 mm Material: Rvs There is no right of withdrawal.See the Auction Terms and Conditions for more information. The minimum age for visiting the viewing and collection days is 18 years. Visitors must be able to identify themselves. A forklift is available during the collection day. The maximum lifting capacity is 3 tonnes. Use of the forklift truck is entirely at your own risk. In addition, waiting times may occur. All irregularities and signs of wear may not be clearly visible on the images. It is strongly recommended that you take advantage of the viewing day to personally inspect and assess the condition and appearance of the lot. Auction-ID: A7-44605-24

- Industrial hot air generator, industrial heater. - Voltage 230 V, 0.75 KW fan motor. - Heat output 77.40 KW - 66500 kcal/h. - Air flow 4700 m³/h. - TIFELL TFV-1-110 oil burner. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-13

Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical data  Capacity: 39,000 bottles per hour (bph) Bottle Formats: 1.5 L Worked Labels: IN REEL two label applicators  Reel Change: Automated Run Time: Approx. 55,000 hours Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) Working Conditions: 5-40 °C, 30-80% humidity, up to 1000 m altitude, no explosive atmosphere working direction: left-right/clockwise  bottle infeed/outfeed parallel on one side of the machine

Working pressure 150bar – 15Mpa. Work extremely powerful and absolutely environmentally friendly! Maximum temperature 90°C - 284°F Maximum pressure 150bar – 15Mpa Capacity 900 l/h – 15 l/min burner power 3600W motor power 3.0 kW power supply 230V/50Hz detergent tank diesel Auction-ID: A1-40237-46

Overview  This rotary roll-fed labelling machine was manufactured in 2009 by France SIDEL. The Rollquattro F15 18T is designed for roll-fed labelling of PET bottles in beverage production lines. The machine operates with a rotary system with 18 bottle plates and is configured with mechanical cam control and manual label splicing.  Technical data Capacity: approx. 18,000 bottles/hour Formats: 0.5 L / 1.0 L / 1.5 L / 2.0 L Application: Roll-fed labelling of PET bottles Configuration: Rotary machine with 18 plates, mechanical cam drive, manual label splicing Utilities: 400 V / 50 Hz / 23 kW / 46 A Scope of Delivery  Labelling machine | SIDEL | Rollquattro F15 18T | 2009 | Rotary roll-fed labeller with 18 plates Cooling unit | Kelvin Cool-Power | External cooling unit Control system | Control panel with process indicators

Brand: Kremer Type: KR-7300WH Working pressure: 200 bar Temperature: 30°C to 110°C High-pressure hose: 10 meters of high-pressure hose Equipped with: suction hose for cleaning agent Boiler: diesel-fired Heat Recovery: 58 kW Capacity: 900 liters per hour Connection: 400 volts Electrical power: 7.3 kW Speed: 1450 rpm Weight: 128 kg Includes: high-pressure gun, high-pressure hose, water filter, brass coupling and manual Condition: unused, in the original packaging Auction-ID: A3-43506-447

Temperature control unit for injection molding machine, 1x inspection date July 2025, equipped with 8 zones, Auction-ID: A1-43992-113

Temperature control unit for injection molding machine, inspection date July 2025, equipped with 8 zones Auction-ID: A1-43992-112