hot used for sale

Heating with hot water and heat exchanger. Air filter and Verteilkänäle. Type I engine number 918005 0720.25.20

Fully automatic forming and erecting of NeoTOP partitioned carton fluted trays, NeoTOP open- top trays or NeoTOP cartons including integrated partition from flat blanks; cylindrical objects, applicators, tubes, medical devices or blisters are then laid in. The partitioned cartons, trays and packs are formed fully automatically from two supplied flat blanks. The partitions are formed and glued into the erected pack or onto the carrier blank. The products are then laid in by an automatic integrated inserter. An automatic product presence checker and leaflet inserter, barcode reading systems and a hot-melt unit for tamper-evident packaging complete the machine system. Output: up to 90 cartons / min. Inkl. sep. electr. panel.

Amut Type EA 160 Monoscrew Extruder Complete extrusion line for recycling. 2002 New screw and motor. with hot separator, centrifuge, filter, degassing system 900-1000 kg/h PP 800-900 kg/h PE Poverty Recycling Extruder PP=900-1000kg,built 1997, 900-1000 kg/

Ventilation system FABRIKat TROGES Vienna, different size, 4,000m3/h, 5,000m3/h, 7,500m3/h, 12,500m3/h, 26,000m3/h. All ventilation system sid equipped with 4 connections for: supply air, exhaust air, fresh air, exhaust air and heat recovery, cross heat exchanger, connections for hot water and cold water. More info. 0043-6641838175 or info@frigocom.at

Amut Type EA 160 Monoscrew Extruder Complete extrusion line for recycling. 2002 New screw and motor. with hot separator, centrifuge, filter, degassing system 900-1000 kg/h PP 800-900 kg/h PE Poverty Recycling Extruder PP=900-1000kg,built 1997, 900-1000 kg/

1 x Repiquet 2550mm wide x 820mm dia 4 roll inverted L Calender, Machine type: CALANDRE 4 CYL DE 820 x 2550, Machine no. 70-C9-87 Motorised nip adjustment, Peripherally drilled rolls, High pressure hot water hearing Bush bearings with flood lubrication, Hydraulic pre-loading to all rolls, Roll bending and unbending on roll 4, Cross axis on roll 3 and 1. Automatic bank sensors/control + camera system Traversing unit for roll buffing or sand blasting. 'Citroen' unidrive gearbox, type: SPECIAL, order no. 50491, Power 140/240 C.V. Speed 1500/2250, Output 46/59 with individual motor to each roll- Roll 1 and 4 - 130HP, Roll 2 and 3 - 240HP, Max calender speed 120m/min. Dual embossing station with approx 25 x embossing rolls (+ 5 x rubber pressure rollers) In very good condition.

Amut Type EA 160 Monoscrew Extruder Complete extrusion line for recycling. 2002 New screw and motor. with hot separator, centrifuge, filter, degassing system 900-1000 kg/h PP 800-900 kg/h PE Poverty Recycling Extruder PP=900-1000kg,built 1997, 900-1000 kg/

Which cups can be closed? plastic or cardboard cups (up to approx. 95 mm) are sealed with an aluminium board, plastic board or paper board. What is the working swell of the hand sealer? Pre-filled cups are inserted by hand into the cell board and covered with a board. By moving the board, the cup to be sealed comes under the seal head. When the seal is triggered, the loose board is now hot-sealed on the cup. In the meantime, the next cup can be placed in the other cell and provided with a board. Setting the seal: The desired seal temperature can be set via a text display. In addition, the duration of the sealing process can be determined individually. This makes it possible to seal different cup or board materials with different parameters. Format change: A format change of e.g. 75mm on e.g. 95mm can be done easily and quickly. Power: approx. 400 sealing processes/hr Pow ...

Kartonlaengslauf 10 to 25 cycles/min Hot glue manufacturer: servant

Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station 300mm dia x 2200mm wide (rubber roll driven, emboss roller free running against rubber roller), 12 x cooling drums (4 groups) 180mm dia x 2200mm. Beta thickness gauge (not available) Berstorff edge ...

1 of used wrap-around /traypacker, make ZVT (KHS), type Innopack WP 030 VH. New 2000. Operating side; left. Capacity upto 30 cartons/trays per minute (depending on product and blank dimensions). Siemens S7 PLC with OP 17, Indramat Servos, Nordson hot-melt unit. Wired for 400V / 50 Hz. Used for packing various 330 ml upto 2.000 ml glass and PET bottles as 8/12/20/24 on tray or in full wrap-around cartons. Last used as tray-packer only. Various manuals available. Condition: good. Dismantled and available cleaned ex-warehouse The Netherlands.

1 Piece of cantilever / heavy load shelving system PK (double-sided) top state (from hot rolled steel profiles) ABM.ca.: L. 2,600 mm (2 fields with 1,250 mm axis) T. 2 x 750 mm useful depth (+ 200 mm support) H 2.250 mm > per stand 4 piece arms one above the other > Adjustable grid 100:100 mm, screw > 5 Storage level incl. foot stabilizer > Load / arm / storage level = 450 / 1,350 kg > Rack load = provided 1,800 kg each always evenly distributed load > Rack section, IPE 200 / arms IPE 80 (incl. deflector, Rolling backup optional plugin) > Color: RAL 5010 (gentian blue), connector + diagonal cross galvanized As offer single-sided shelf 1.795,-price + VAT factory Gärtringen / plus freight

System: 1-track rotary cup filler Performance: 1,500 - 1,800 cups per hour Cup diameter: up to 100 mm Dosing system: movable piston-valve filler Cleaning: Manual Filling volume: e.g. 100 500 ml (adjustable) Casing and frame: Stainless steel 1.4301 and MAKROLON Control: Siemens SP 7 with 4" touchpanel and colour display Power: 0,9 kW / 400V - 10A Air consumption (at 6 bar): approx. 340 l / min Weight (net): approx. 500 kg Dimensions (L x W x H): Basic dimensions: 820 x 820 x 1.600 mm including filler and evacuation: about 2,000 x 1,300 x 1.600 mm Machine stations basic version: - Cup magazine with automatic destacking - Piston valve filler for pasty products, e.g. Greek yoghurt, fruit yoghurt, cream, etc. Volume: e.g. 100-500 ml (others on request) -Board magazine and trailer -Hot sealing station -Cups lift and pull Options: -transfer dev ...

Rundumetikettierer FAB. CBV 140 R, demonstration machine, 2 months old, 130 mm, Max label height, label length 10 300 mm cylinder diameter of 110 mm, mechanical capacity 25-30 containers / min., 3-roll fixation of the container during the labeling process Alternatively with printing (hot embossing unit)-extra charge euro 900,--

Qty. 1 Second-hand extrusion press line Mfc.: SCHLOEMANN Built: 1980 Force: 4000 MT The press was used in the brass and copper application. The press has been reconstructed and changed to aluminium application in 2005. Before the production has been stopped was the press in excellent condition. The plant has been stopped in 2010 due to ecenomical situation. Billet dia.: 8’’(203mm) - 12’’(304mm) Billet length: 1000 mm Main ram: 1400 mm dia Side cylinder: 300 mm dia. (piston head) Exit sıze of and plate: 500 mm Scope of supply: Feeding system Billet furnace Extrusion press Run aut table 45 mt long Cooling table (belt type ) Strecher force: 200-300 ton Die oven Finsihing table and saw Billet furnace ( 2 pieces) one natural gas type one induction type JUNKER Hot saw Operation desk PLC type (need sone ...

Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...

Top labeler CBV 140 L, label height of 130 mm, roll core diameter 76 mm. Roll diameter 350 mm, mechanical capacity 30-40 containers / min., electrical connection 230V, power consumption 0.5 kW, strip width 140 mm price: EURO 15.950,--without printing Price: EURO 15.850,--with printing (hot foil) Special device for applying lateral overlapping labels possible.

Assembly table for structural timber elements, length max. 6000 mm, max. 3000 mm wide, 5 trapezoidal spindle ? clamping system manually, mechanically over the length of 6 m distributable, tubular steel structure with height-adjustable feet hot-dip galvanised, ideal for flying mount. Table can be extended if necessary and be equipped with more spindles or press items for an additional fee. The table is positioned behind the vertical panel saw, and can be visited if you are interested on the spot! Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...

Comerio Ercole 1500mm wide x 550mm dia 4 roll inverted L calender. Peripherally drilled rolls (high pressure hot water heating), Motorised nip adjustment, Adjustable guides, Cross axis to roll 3, Unidrive gearbox with universal couplings. Motor power: Roll 1 and 4 - 50kW. Roll 2 and 3 - 60kW DC variable speed. Oil lubrication.

HOT IRON OSCILLATING SAW & OIL HYDRAULIC FEEDING CONTROL SYSTEM

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL2200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce ...

Important and distinguishing design features of the RaptorX SL CNC Router steel base machine RaptorX-SL2200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction metho ...

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.  ...

GLIMEK Conical Rounder CR-400 GM - exhibition machine, brand-new condition, year of manufacture: 2022 - weight range 30 - 2.000 g, capacity range up to 3.600 pieces per hour, centrally adjustable track system, non-stick coating on cone and tracks, infeed at 6'00, outfeed at 12'00, track base plates made of food safe plastic, frequency converter drive for the cone speed, hot and cold air blowing unit, mechanical flour duster from stainless steel, 5 m connection cable and CEE-plug, power supply: 2.8 kW electrical connection: 400V/50-60 Hz/3~

Important and distinguishing design features of the RaptorX SL steel base machine The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects.  ...

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our new concept of working with an "invisible" motor for the X-axis an ...

The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). 3D engraving, bas reliefs in marble etc. Create and mill, what ever you want . The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objects. Considering our  ...

Model:XL-308515R Size?W9.15L26H4.5m Frame: Hot galvanized steel frame,?601.8mm & ?401.5mm, made of Q215 steel tubes, according to the standard of GB/T700-2006. Cover: 300g PE, 420g or 610g PVC, double sides PVC coated fabric, gray, green & white color available. Door Style: Simple Mechanical Door. Door Size:As per customer requirements. Snow Load: 2.28kpa Wind Load: 80km/h Life Span: more than 15 year. Function: Industrial, agriculture, construction warehouse, vehicle storage, aircraft hangar, livestock raising. Feature: High strength, easy assemble and dismounting, large capacity, excellent stability. Advantages: a). Low Cost compared with steel structure warehouse and prefabricated house. b).All weather suitable, year round applicable.100% waterproof, fire resistance, flame retardant and UV inhibitor. Our Service: we have a professional team and the first class servi ...

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

1 x BUZULUK 1920mm wide Four-roll 'L' calender - Type: 03506 - Rolls dia 710x1920 mm - Year of manufacture: 1989 - Peripherally drilled rolls - High pressure hot water heating (Steam 1.6 and 3.2 MPa) - Motorised nip adjustment to rolls 1, 2 and 4 (30mm adjustment) - Cross axis on roll 3 (0-30mm) - Roller Bearings - Unidrive gearbox with DC motor to each roll - Rolls 1 and 4: 46 kW - Rolls 2 and 3: 77 kW - Working speed of 4th roll max 60m/min In very good condition.

Thermoforming cfs powerpak rt. Hot product packaging, vacuum by steam. Rigid film, mechanical assistance. Welding. automatic labelling. Two rigid cutting by takes part. Nibbling the edges. Like new.

Minidose packing machine Made in Spain for small dose of sauces, olive oil, powder, hot caramel. The machine is new one and can be prepared for any kind of liquid, powder, granulate. PLC and screen. Electric photocell. coding machine. Further information please contact

Jaust 60 KEG / h, 3 cleaning heads 1 filling head / 1 cleaning tank, 1 mixing tank, 1 hot water tank

Ironing Pressing Line composed by In feeding Belt System Hot Press Cold Press Out Feeding Belt System

SIG-HBM: Maximum width of the film roll: 740 mm Control: Siemens S7 Product Moulding / straightening / filling / closing of bags - tubular bags Description horizontal bagging machine, rotating cross-sealing station for hot or cold sealing The machine is designed for the following products: chocolate bars, fruf bars, chocolate table, waffle, biscuit stacks, baked goods, deep food, non-food, pre-packaged products, cheese, meat,

Important and distinguishing design features of the RaptorX SL steel base gantry machine RaptorX-SL1200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large ...

Sprueh cleaning system for small to medium batches, for workshop, maintenance or interim cleaning, cleaning with hot water, spruehkabine as top - loader abhaenging of model: basket diameter 820 - 1250 mm, load capacity 80 - 300 kg, spruehdruck 1.8 - 3.5 bar, heating 4.5 - 12 kW, optional: thermostat 0 - 90,Timer, oelskimmer, filtration, be- and unloading trolley; optional: thermostat 0 - 90,timer, oelskimmer, filtration, be- and unloading trolley; New

100,000 litres of fire-fighting water tank - water tank - underground tank for underground storage, outside with bituminous insulation - needed - the container is emptied, cleaned and was factory-provided by us with a bitumen exterior painting Tank capacity: 100,000 litres / 100 m³ Length: approximately 15,750 mm Diameter: approx. 2,900 mm Weight approx. 11,600 kg Material: Material steel S 235 JRG 2 is a low-cost delivery with own trucks. Simply tell us the place of delivery, will receive the exact freight costs immediately. A tour is at any time possible by appointment only. If you need any more information, just give us a call or send us an email to info@barth-tank.de. Trade-in and purchase of tanks/containers is possible to do this, just talk it over us. As the European market leader, we maintain a large stock of over 3,000 above-ground and underground storage  ...

Safety railing clamp for screwing Safety on every structure These tried-and-tested systems give your site crew optimum protection and make a significant contribution to a smooth workflow. When the crew are properly protected, they work safely, which also means more rapidly and thus more efficiently – for your success. Doka handrail posts provide comprehensive safety • against fall hazards • on the structure and the formwork • thanks to their high quality (hot-dip galvanised) • conform to EN 13374 Class A Convenient and easy to mount Multi-functional as they can be used in many different situations ? maximum safety with easy assembly ? no squared timber waste

Rotary washing machine as front loader, cleaning by pressure sprouts with hot water, machines in different construction sizes available: basket diameter of 900 - 1800 mm, loading weights of 300 - 800 kg, loading height height from 500 - 900 mm, depend on model: washing, washing-spueles or washing-spuelen-drying in a plant. Special wheegoings are happy to be taken care of. We are happy to send you a detailed offer

Rotary washing machine as front loader, cleaning by pressure sprouts with hot water, machines in different construction sizes available: basket diameter of 900 - 1800 mm, loading weights of 300 - 800 kg, loading height height from 500 - 900 mm, depend on model: washing, washing-spueles or washing-spuelen-drying in a plant. Special wheegoings are happy to be taken care of. We are happy to send you a detailed offer; New

Integrated equipment for production of chocolate, chocolate cream and chocolate coating for ice cream. The fat is melted in the heated fat melting tank, then fat is dosed into the temperature controlled chocolate ball mill where is added sugar, cocoa powder and other ingredients, being milled for about 4-6 hours at a controlled temperature. In the first part of the process the tank is heated then cooled by tap water. After milling the chocolate is transferred to the chocolate storage tank. Fat melting tank 540l heating by water jacket and electrical resistor heated grid with 250l beneath the grid volumetric dosing pump controlled from switch board 0.55 kw, app. 200 rpm stirrer 13.1 kW - installed power 2 x 6 kW = 12 kW - heating resistors 0.55 kW water circulation pump stainles steel filter heated fat dosing pump Ball refining tank 500l working ca ...

Frequency-controlled heating laboratory press with force measuring device -Pressure 20 KN / 2 tons -Pressing area 220 220 mm -Maximum pressing force at 220 220 mm: 41 N / cm² -Hot press with moveable lower pressing plate, electric drive with gear reduction, force measurement is carried out by means of strain gauge sensor -Heat output approx. 1 KW -Plate temperature 120 ° C -Dwell time / duration of laminating: 1-10 s -Pneumatic connection 6bar required -Power supply 400 V, 16 A -Sliding table with integrated positioning pins, lower pressing plate, pneumatic drive -Pressing panels with switchable integrated vacuum channel -Electrical control system integrated with PLC control display in the front panel of the machine -Side channel pump to generate the vacuum

Uhlmann C2504 continuous motion cartoner, carton size range min. 30x15x65 mm (AxBxH), max. 80x90x155 mm (AxBxH) Blister/tray size range min. 30x3.5x60 mm (LxWxH), max. 75x12x150 mm (LxWxH), suitable for blister count from 1 - 12 blisters per carton, Leaflet/Booklet feeder (leaflets/booklets are automatically taken from their carton/trays and placed into the infeed system), the machine is also prepared to accept a GUK leaflet folder and feeder. Includes Wolke m600 advanced inkjet printer for variable data and codes, set up for reverse tuck cartons with Nordson PROblue 4 hot melt glue system for tamper evidence. The cartons discharge though a Pago Pagomat 6/2 labeller for top labelling (vignette/bollino) Electrics 400 V/230 V/50 Hz, 20 A, connected load 10kW Compressed air 6-10 bar Machine footprint ca. 7289 x 2041 mm (LxW) Height ca. 2254 mm Machine nett weight ca. 8000 kg Output u ...

Ortmann +Herbst / Crown Simplimatic 100/15/15 Glass Bottle Filler with 100 filling valves, 15head crown corker and 15head Zalkin plastic cap screw capper with Pick and Place System Model: Hansa M Built: 1999 Running direction: left - right Pitch: 113 mm with double pre-evacuation Capacity: up to 40,000 bph at 250 ml of mineral water bottles up to 30,000 bph with 330 ml of beer glass bottles Electric: Siemens S7 with touch panel with safety housing incl. 200, 250, 330, 500, 750 and 1,000 ml sets (bottle drawings attached) incl. many spare parts (e.g. filling valves, lifting cylinders, crown cork head etc. - list attached) The product distribution list was renewed in November 2019. Hot filling is also possible if you use Nitrogen instead of Co2.

LAMINATING SYSTEM POLYTYPE BB 2200 LAMINATION LINE Coating/- lamination equipment for solvent based resin system. On an existing film or composite material. Year: 2008 Condition: Excellent The different film thicknesses what can be used depending on the materials, see references: Plastic foils 25-250 microns Metal foils (copper, aluminium) 20-150 microns Total composite thickness max. 500 microns Machine data: Production speed 0 - 150m/min Production speed 840 - 2160mm Resin 1 - 40g/m2 Winding units (main winder-/ lamination winder-/tensilized film winder): For unwind of the base film there are two winders (main winder/ lamination winder). Winder performance: - Winding direction clockwise / anticlockwise - Brakes ystem for constant and regulated tension e.g. alu foil with max. 2000 kg roll weight - Roll system centerless for steel,plastic-, carton tubes with optimal  ...

REHEAT FURNACE Type: Walking Beam Incoming Billet: 160 x 160 mm x 8.300 – 12.000 mm Charge: Hot and Cold Discharging Temperature: 1150 Degr. Nominal Production 90 Ton/Hr Fuel: Natural Gas (LNG) Furnace inside dimensions: L x W 12.500 x 12.800 mm REBAR ROLLING MILL: Type: Housingless Stands Roughing Mill: 6 Stands Intermediate Mill: 6 Stands Finishing Mill: 6 Stands Horiz. Stands # 1,3,5,7,9,11,13,15,17 Vert. Stands # 2,4,6,8,10,12,14 Horiz./Vert Stands #16 and 18 CROP SHEAR No. 1 Head & Tail Cropping, Emergency Chopping Type: Crank Shear- Blade width 200 mm CROP SHEAR No. 2 Head & Tail Cropping, Emergency Chopping No. of Blades: 4- Blade width 180 mm DIVIDING SHEAR Cutting to multiple lengths COLD SHEAR Cutting to final length Shear type; CMC 0630 0950 No. of Blades: 2- Blade width 900 mm Product Length: 6-12 Meter (Standard)  ...

Wiesheu B4 M Hot air oven with fermentation oven used shop oven Wiesheu for 4 sheets 60x40 cm with exhaust hood. The oven is made with a fermentation cabinet from 2005. The furnace is with fixed water connection for swelling and is movable on wheels. We have a wide selection of shop ovens in the warehouse to visit at any time. You can visit this and theothere ovens. Payment and shipping on request. Wiesheu circulating air oven Type: B4 E2 IS600 for 4 sheets 60x40 sheets with fermentation chamber / built 2005 with IS500 control 2x10 editions for 60x40 sheets Control IS 600 Hood completely stainless steel clad Door stop left Furnace built in 2005 Technical data furnace: 400V - 50Hz - 13A - 8.4 kW Dimensions: Height: approx. 210 cm Width: approx. 90 cm Depth: approx. 95 cm

PUR bag melter for processing from 2 to 3 kg PUR-DIN aluminium foil bags, Technical description: Hose connections, temperature controller PT100, 2 internal heating circuits, storage tank approx. 2.8 kg volume for bag change, 1 gear pump 7.3 cc drive via three-phase motor, glue stop shut-off direction, level monitoring for the Bag change with optical and acoustic signal, electronic Control with larsicht input (multilingual), weekly timer, digital inputs and outputs for integration to the mother machine, melting capacity adhesive-dependent, temperature reduction, Operating voltage 400 V Including - Hot glue hose length 3.5m i.D.10mm - Application head large glue outlet 5.6mm probe Pt100 - Homag cover plate QA65 with hose aging re - Switching amplifiers - Teflon probe S-506