hot water boiler used for sale

We are selling here a tilting cooking kettle from the manufacturer Electrolux, type 100 L in a very good used and functional condition. Runs on 400 volts, 18.2 kW, built in 2007, completely stainless steel, electric tilting, programmable, 100 liters capacity, workshop tested, ready for immediate use, dimensions W/D/H 120/100/90 cm, others on request.

Metos Proveno 300SM combi kettle 2016, stainless mixing kettle with scrape surface, 300l capacity, temp range 0 -120'C, heavy duty stainless hinged safety lid, HMI touch screen controls, 2Kw

Description: Content: 1000 L Operating pressure: min. 0 bar, max. 11 bar Operating temperature: min. -10°C, max. +50°C Approx. Onsite Dimension. (l x w x h): 800 x 700 x 2,200 mm, weight approx.: 300 kg

Permissible operating overpressure: 6.0 bar Permissible flow temperature: 120 C Permissible boiler power: 400 kW Heating output: 444 kW Content: 380 liter Burner: Weishaupt RGL 3/1 - E Year: 1994 Fuel: Heating oil EL and natural gas Subject to prior sale - errors possible Internal Reference Number: D-1176

Heater, burner, gas burner, gas forced burner, forced air heater, gas condensing boiler -Gas condensing boiler: without the gas burner -Manufacturer: Viessmann, gas condensing boiler Vitocrossal 300 type CR37 -Rated heat output: 720 kW -technical Data: see photos of nameplates -Dimensions: 3360/1165/H1880 mm -Weight: 1500kg

Available two units of this SIAT RECOPACK recovery boiler. This boiler recovers the heat from the exhaust gases of turbines or engines, but it doesn't have burner to produce his own heat. They are disassembled and ready to be load. Power 493kW pressure 12 bar Capacity 5065 l YOM 2009 Model Recopack

Thermal oil boiler Heuft HK230 - Thermal oil boiler - Manufacturer : Heuft / OHL Apparatebau & Verfahrenstechnik GmbH - Type: HK 230 - Thermal oil boiler with gas burner - Heating capacity : 230 kW -Ab. Operating pressure. 4 bar -Ab. Operating temperature:300 C - Capacity: 118 L - Minimum flow rate: 9.5 - Operating voltage: 400 volts 50 Hz - Control voltage: 230 volts - Connected load: 11.6 kW - Nominal current 22.5 A - Year of construction: 1998

Giusti 375L cooking kettle Serial: TF1160 Stainless, capacity 375L, steam jacketed, mixing kettle, variable speed, adjustable temperature control, scrape surface, tilting to discharge, 3Ph

Giusti 375L cooking kettle Serial: J11403 Stainless, capacity 375L, steam jacketed, mixing kettle, variable speed, adjustable temperature control, scrape surface, tilting to discharge, 3Ph

Description: Content: 500 l Operating pressure: 16 bar Temperature: min. -10°C Temperature: max. 50°C Approx. Onsite Dimension. (l x w x h): 600 x 500 x 1,900 mm, weight approx.: 300 kg

Manufacturer: Vulcanic Model: Vulcatherm Type: Temperature controller Date: September 2000 (left machine) and December 2003 (right machine) Power : 20 KW Weight: 140 kg Max. pressure : 12 bar G Max. temperature : 140 ?C Thermal fluid: water Management system type 20789 V2, installed in 2015 by the manufacturer.

Manufacturer: Vulcanic Model: Vulcatherm Catalogue number : 829721-01 Type: Temperature control unit Weight : 210 kg Max. pressure : 10 bar G Max. temperature : 90 ?C Thermal fluid : water

Manufacturer: Solev (Clauger) Model: RH 550/230-25U-0-RS-SP-2G/1F Year : 2007 Type : glycol water heat controller / Thermal skid Class : ATEX - EX II 3 G - EEx b,c,d,e II B T2 Minimum / maximum temperature : +20?C / +230?C Intensity: 51 A. Heating: 25 kW immersion heater Heating control by thyristors. Cooling: No cooling system. Heat transfer fluid: Therminol 66 Regulator type 2704 single loop from EUROTHERM Centrifugal electric pump unit giving a flow rate of 26 m3/H Motor: 4 KW. ALWEILLER NBT32-160/01/149 pump Filling volume : 69 L - 246 L Documentation available Sold with protective cover.

Description: min. power: 170 kW max. power: 850 kW Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Water cooler tower,1 MW- 1,040 kW, 2pc, make BALTIMORE, each with 2 fan units, see photo.

Air cooler water cooler DMA 315 6.7 m ³/h 28 ° c air-water cooler cooler aeri Air-water cooler Manufacturer: -. Model: DMA 315 M35B 6.7m ³/h m. ABB electric motor slightly damaged on the Panel Year of construction: 1999 Used functional & in good condition. Off bearing resolution

Pure water unit ENVIROFALK Performance in continuous operation 15 sqm / h max 18 sqm / h CA 2 trailers full of material Year 2009 / was for 1 year in use then the production has been discontinued. complete with all documents and control New price 260.000,-€

Water tanks & extinguishing water tanks USED & RECONDITIONED Muensterlandtanks.de Container and tank trading Call us: 0162 1341979 A used steel tank in the size of 20,000 Ltr. is offered. Volume: 20.000 Ltr. Material: Steel tank tank, material S235JRG2 Tank shape: cylindrical, horizontal, double-walled Diameter 2.0 L approx. 6.80 m Exits: Dom on the top Departures top Tank according to DIN 6608 Tanks can be driven over and withstand the earth pressure - plastic tanks are compressed over time! Condition: Tank cleaned from the inside and provided with a new bitumen coating from the outside. Suitable for above-ground and underground storage of water, process water, rainwater, feed etc. Location Ascheberg. Transport can be arranged cost-effectively. The loading of the container on trucks or trailers is free of charge! For use as an extinguishing water tank, th ...

Cooling unit, cooling water recooler, water cooler, chiller O. Hellwig Year of construction: approx. 1995 Cooling capacity approx. 4 kW Nominal power cooling unit 3 kW Refrigerant R422D Water tank capacity approx. 35 liters Flow rate circulation pump 40 liters/min Pump capacity 0.63 kW Water connections 1/2 inch mains connection 3 x 380 V AC, 50 Hz, 4 kW - Temperature adjustment via rotary potentiometer Space requirement L x W x H 1100 x 750 x 140 mm Weight 285 kg; used

Nijhuis Water Technology BV waste water system, type: NWT 198105, Varisco pump, type: N8N6 32-26 325, serial number: 909-2008, 15 kW, total dimensions: 3750 mm x 2250 mm x 3500 mm.

This Soitaab Waterjet IP-20 Waterjet cutting machine was made in 2017 in Italy.

This Bystronic Byjet Flex 6030 Waterjet cutting machine was manufactured in the year 2016 in Switzerland and has 5827 production hours.

Caffini libellula This Caffini water pump with 400 V electric motor is often used in construction industry, municipalities, civil engineering. The Caffini libellula diaphragm pumps have always been highly appreciated by their users in the construction and public works sector. The ability to run dry allows the operator to keep the ditch dry, even when it contains mud and suspended solids., Max yield : 20 m³/h, Max head : 16 mWK, , Available with any connection you require, , Throughput capacity: 20 m3/h, Max. head: 16 MWK, Weight: 100 kg, , = More information =, , Year of manufacture: 2024, Applicable material: Water, Empty weight: 100 kg, Cargo space capacity: 335 l, Technical condition: very good, Visual appearance: very good, Damages: none, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are h ...

Dont miss a drop with this impulse digital water meter, designed to accurately track your water discharge. Heres why its a must-have for your drainage installation:, Insight: With this digital water meter you have immediate insight into the amount of water you are pumping. No more guesswork, just accurate information., Easy Installation: No more hassle with complicated installations. Our digital water meter can be easily installed, so you can immediately benefit from the benefits., Dont wait any longer and choose our digital water meter today., Contact us for more information and find out how you can start measuring flow!, , = More information =, , Year of manufacture: 2024, Colour: Grey, Connector size: 4 Cardan, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Damages: none, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentradi ...

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank / extinguishing water tank 100,000 liters used. The container is used and cleaned from the inside. Length: approx. 15700 mm Diameter: approx. 2900 mm Weight: approx. 16000 kg The container can be fitted with the appropriate fittings for extinguishing water can be equipped according to DIN . Of course, you can also use your tank system. All our tank systems are used in our company by selected employees extensively checked and checked. An inexpensive delivery can be offered with . In addition, we purchase existing tank systems and can professionally as an approved specialist company , clean and transpot. We would be happy to make you an offer . We offer the tank system free of charge from the Warstein ...

160.0 kW, max. 7.5 bar, 28.26 m3/min.

160,0 kW, max. 7,5 bar, 28,26 m3/min.

Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank / extinguishing water tank 40.000 liters used. The container is used and cleaned from the inside. Length: approx. 870 mm Diameter: approx. 2500 mm Weight: approx. 7000 kg The container can be fitted with the appropriate fittings for extinguishing water can be equipped according to DIN . Of course, you can also use your tank system. All our tank systems are used in our company by selected employees extensively checked and checked. An inexpensive delivery can be offered with . In addition, we purchase existing tank systems and can professionally as an approved specialist company , clean and transpot. We would be happy to make you an offer . The tank system we offer freely loaded from the location Wars ...

Cold water set make Combitherm Germany, water-cooled, cca.400Kw.with 2 pcs. Screw compressor Bitzer Type CSH 7571-90Y, refrigerant R 407C, two circles 50/50%, with control Digital uwm. Y.O.M.2005.Little used.state like new. Model KWW 7500 R407C

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 60,000 litre single-wall insulated storage tank as follows. Rated capacity 60 cbm Piece 1 used but overhauled, i.e. the container is cleaned, externally insulated. Material steel, material S235JRG2 Documents Manufacturer's certificate / test certificate according to DIN and type plate Piece. Piece. 1 vent nozzle Piece. 1 filling nozzle Piece. Piece. Piece. 1 ladder Piece. Form. cylindrical storage container with feet/console Container dimensions Length approx. 12,680 mm plus insulation 100 ...

Steel tank 30000 litres / 30 m³ / underground tank / firefighting water tank / double-walled / Rain water recovery tank / water cistern good condition, underground storage tanks, water tank, underground tank, diesel tank, heating oil tank, double-walled steel tank, Content: 30 m³ / 30000 litres Material: steel tank according to DIN 6608 Dimensions / size: approx. Ø 2.00 m x approx. 10.00 m long Weight: 6 tons Other: outside with bituminous insulation, double-walled, incl. test certificates. The container is used, inside empty and properly cleaned. According to the age traces are present. Steel tank / container can manure, as a storage tank for water, AHL, ASL, seeping juice, canola oil, rain collection tank, used fire-fighting water tank, water tank, etc. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your de ...

Cold water set water-cooled, turbo-cooling machine, Carrier 19XR5556, R134a, 400V 50Hz,Bj 2001,ca 2500KW (700ton)Cooling capacity, little operating hours, always maintained,very good condition, super efficiency.

approx. 20 m³ / 20,000 litres steel tank, firefighting water tank, cistern In good condition, aboveground or underground storage tank, diesel fuel tank, fuel oil tank volume: approx. 20 m³ / 20,000 litres material: steel length: 6,50 m diameter: 2,00 m weight: approx. 3 to 3,5t The container is used, has been emptied inside and professionally cleaned. According to the age there are traces of use. Can be used as a storage tank for water, slurry, AHL, ASL, canola oil or as rainwater tank, firefighting water tank, cistern etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so  ...

Cat. No. 11-3160 New Standard: Material V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Heating jacket height 970 mm Insulation made of PU foam thickness = 80 mm Standard: Manhole top Ventilation valve made of PVC Manhole inside oval 440 x 350 and manhole outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with outlet pipe DN 50 Digital thermometers Clear drain DN 50 Transport eyelets Cat. No. Contents Diameter Height Cyl.Height Feet 11-3160-1 1200l 1350 mm 2070 mm 1000 mm 3 11-3160-2 2400l 1350 mm 3130 mm 2160 mm 3 Disc valve DN 50 Price on request For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Interm ...

Water cooler, ruck cooler GEA, 400-600KW.with radial fan, suitable for air duct as heating or to blow into the open.

to see used Wasserenthaertungsanlage like in the picture! achievement: approx. 17m

to the storage of custom water / fire-fighting water. the container is used, emptied inside and cleaned expertly. he owns a manhole DN 600 with cathedral lid, two angschweisste feet and will provide outside completely with a new bitumen painting. L = approx. 10.70 m / D = 2.50 m / weight approx. 9.0 to. / ex works, freely charged. for the use as a fire-fighting water tank konnen we the container completely equip with a fire brigade suction connection, consisting of: -1 Stck. Suction management with A-firm coupling to German Institute for Standardization 14319 with special fastener for Feuerwehr-Dreikantschluessel - 1 Stck. Bleeder tube with bonnet - 1 Stck. Bearing pipe with bearing stick for measurement of the filling state - 1 Stck. Cathedral lid with screws and poetry. the suction management can be used as a filling and withdrawal pipe. the components are prep ...

to German Institute for Standardization 6608 - outside with bitumen isolation. L = approx. 10.00 m / D = 2.00 m / weight approx. 6.0 to. / ex works, freely charged. the container is used, emptied inside and cleaned. The container was amended in our work from the outside and was postisolated with bitumen mass. Nevertheless, insulating damages by transport can exist in the container.

Preliminary operating machine for year QIV/2013, 100 operating hours Basic 1530 Basic Waterjet Processing Centre 1530 Working area: X-axis 3050 mm Y-axis 1550 mm Z-axis 150 mm The abrasive water jet cutting requires the addition of a supplied abrasive cutting head. This reduces the distance between cutting head and factory tool. drives: drive side, reverse play-free linear drives in X and Y are used with stoeration-free CAN-BUS communication as well as guide well-known manufacturer. This This means maintenance and wear-free operation of the system and the long -term Drive unit X-axis is mounted on granite. Individual linear units are protected by folding beam and covers in addition to the ingress of dust and water. Accuracy: 0.05 mm / Working area Max.Speed: 15,000 mm/min Z axis German-speaking operator software for machine control Abrassiv de-sludge plant ...

; in stock

MicroStep CNC guide machine AQUACUT 3001.15 W working area (3000mm x 1500 mm) high pressure pump: KMT Streamline Pro I 60 S, 6200 bar cutting up to 300mm only 4 000 operating hours Including osmosis water treatment system (12,000,- Euro) The AQUACUT is a robust and very practical CNC guide machine in portal construction, specially developed for continuous use in water jet cutting. The high dynamics of the system are overpowered by a low-set machine portal, digital DC servo motors with play-free transmission and practical, stainless linear guides in all three axes. In combination with an HD pump, the AQUACUT can be used to cut solid metals, hard rock, marble, armoured glass, ceramics, plastics, corrugated board, foams, as well as composite materials. assembly and commissioning on request. ; ready for immediate use

Immediately applicable

QTY. 2 CONTAINERS, OD 655 x ID 250 MM x 560 MM LONG & OD 522 x ID 180 MM x 560 MM LONG, PIRCER DIA. 63 MM,

Raw water pump in Exchange

Raw water pump in Exchange

water cooler, table cooler, recooler make Güntner, approx.1000KW cooling capacity, Device with 12 fans,throughmeser 1000mm. 416 litres capacity. 12000mm length, 2400mm width, 1500mm height, 8 feet, weight 2950KG.

Thermo Haake open water bath circulator. Manufacturer: Thermo Haake ( Germany ) Type: V26 003- 2391 Material: Stainless steel Volume: 19 - 26 liter Power: 230 v. 50/60 Hz, 1.5 kW Bath open dimensions: L 300 mm x W 350 mm x H 200 mm Overall dimensions: L 360 mm x W 750 mm x H 400 mm Very good condition 5 pcs available

New Water trough for Heidelberg KORD 64

M. Number: 405198 Item: 381021 Power supply: 230V / 50Hz Power: 0.55KW Max pump pressure: 14 bar Max operating pressure: 14 bar Mediumstem min / max: 5/35 C Min concentrate flow: 84l / h Permeate Max: 250l / h Permeat backpressure max: 0.3 bar

Flender engine, water cooled, with pump 3 ~ engine: ANWA-250ME-04 K No.: 3189850, IN the 2302, 1996 400 V VDE 96A 73.7 HP/55kW, cos. P. 0.87 50 Hz, 1475/min, th CI F, IP 54 DIN VDE 0530/91 DIN IEC 38/87, 0.530 t Cooling water consumption 15 l / min.