hot water boiler used for sale

Power supply 230 V ~ 50 Hz Power 550 W Flow rate 17,000 l/h Connection diameter 5 cm Length of supply line 8 m Maximum height 8 m Auction-ID: A7-50066-148

The 12V submersible pump can be used for fast refueling of diesel fuel, transfer of water and fluid oils from storage tanks to various vehicles without leakage. Auction-ID: A7-50066-412

The 12V submersible pump can be used for fast refueling of diesel fuel, transfer of water and fluid oils from storage tanks to various vehicles without leakage. Auction-ID: A7-50066-459

Power supply 230 V ~ 50 Hz Power 550 W Flow rate 17,000 l/h Connection diameter 5 cm Length of supply line 8 m Maximum height 8 m Auction-ID: A7-50066-248

The submersible pump with float for dirty water presented, with a power of 900W, is a reliable solution that fully meets the needs of users looking for an efficient and effective method for water drainage. Auction-ID: A7-50066-322

The submersible pump with float for dirty water presented, with a power of 900W, is a reliable solution that fully meets the needs of users looking for an efficient and effective method for water drainage. Auction-ID: A7-50066-422

Power supply 230 V ~ 50 Hz Power 550 W Flow rate 17,000 l/h Connection diameter 5 cm Length of supply line 8 m Maximum height 8 m Auction-ID: A7-50066-48

The 12V submersible pump can be used for fast refueling of diesel fuel, transfer of water and fluid oils from storage tanks to various vehicles without leakage. Auction-ID: A7-50066-312

The submersible pump with float for dirty water presented, with a power of 900W, is a reliable solution that fully meets the needs of users looking for an efficient and effective method for water drainage. Auction-ID: A7-50066-467

The Selwood D75 centrifugal pump can pump up to 60 m³/h with high efficiency., The mobile pump set is equipped with a water-tolerant Selprime® vacuum pump and a Hatz diesel engine., The pump is built into a soundproof enclosure and is easy to operate and maintain., , With its light weight, it is highly versatile and stands its ground, in construction and infrastructure as an all-rounder., , Throughput capacity: 60 m3/h, Max dirt passage: 30 mm, Motor brand: HATZ 1D41z, Max. head: 24 MWK, Max dirt passage: 1500 rpm, Weight: 530 kg, , = More information =, , Year of manufacture: 2010, Empty weight: 530 kg, Connector size: 4 inch, Technical condition: good, Visual appearance: good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an  ...

This Imulse SIP 100-4 dirty water pump is often used for sewer detour, dewatering, surface drainage and liquid transport. Operating the pump is extremely easy and is controlled by Impulses Ecomizer-Pro control system. This control system can analyze improper use and misuse of the pump, protecting itself from unnecessary wear costs and/or damage., , Some notable features:, - Running time on a full 200-liter tank: 220 hours on average, - Permeable solids: 80 mm, - Maximum capacity / maximum head: 135 m³/h / 22 meters, - Vacuum pump for priming: automatically shuts off once the pump is filled with water, , If you have any questions please feel free to contact us., , Throughput capacity: 135 m3/h, Max dirt passage: 80 mm, Motor brand: Hatz, Max. head: 22 MWK, Max dirt passage: 1800 rpm, Weight: 1700 kg, , = More information =, , General information, Year of manufacture: 2025, Applicable mat ...

Water bath / Shaking water bath Manufacturer Nickel-Electro Ltd. Clifton Type NE 5 – 28 D Capacity 28 litres Power 1000 watts Temperature range +5°C – 100 °C PiD control Test tube rack Simultaneous observation of the set and actual temperature

DI WATER SYSTEM Item under: F20BC Located at: F21RBD If interested, kindly contact Farha (nurfarha_atopglove.com.my) or Ms Fatimah (fatimah_asmadtopglove.com.my)

Pump Unit / Water Pump / Centrifugal Pump / Slurry Pump Manufacturer: KSB Model No.: 1LG4 253-2AB60-Z 55kW The pump is used, in good condition. Internal number: 628 232 257569508492

System separator type BA298-80 To protect water systems against backflow, back suction and back pressure of liquids. The system separator according to the three-chamber principle consists of two non-return valves, a drain valve and three ball valves for connection of a differential pressure manometer.

Unit for carrying out condensation water tests. The bottom trough of the test chamber is filled to approx. 10 mm bottom water height and the test is programmed and started via the control unit. Tests can also be carried out in atmospheres containing sulfur dioxide via the gas filler neck. The metered gas quantity is fed into the chamber via the gas filler neck. The test chamber is equipped with a heater for different temperature profiles. The chamber can be opened and closed by means of pneumatic cylinders. A spare parts list is enclosed with the documentation.

System separator type BA300 System separator - Ductile iron with backflow preventer on input and output side, 3 ball valves, drain valve Flanges according to DIN EN 1092-2 for safeguarding drinking water systems against backpressures, backflow and back suction, for residential buildings, industrial and commercial purposes, horizontal installation position with drain valve downwards, discharge volume in case of failure: 35 m3 / h, 3 ball valves for connecting a differential pressure gauge

Double softening system consisting of: - 2 GRP pressure vessels (Pentair) - 2 control heads (1 control head must be renewed) - 1 sole tank - Control unit MMP 81 (Gebrüder Heyl) - Piping with pneumatic diaphragm valves The plant is dismantled and stored in Warburg.

The Hidrostal Betsy 125GG (popularly also called eekels pump), has been a great success for years! main reason for this:, , spacious dirt passage, pumps viscous liquids with solid particles, high output against a particularly low engine power, suctions very quickly and up to a great suction height (8.5 meters), blockage-free wear-resistant screw centrifugal impeller, can slobber and can run dry, , Machine can be used well for:, , pumping sludge, Keeping sewer wells and cellars dry, everywhere that really needs to be sucked and slobbered, emergency pump unit including fire brigade, water boards and, Water purification, pumping surface water, keeping construction pits and construction trenches dry, , MAX capacity : 342 m3/h at 1500RPM , 400 m3/h at 1800RPM, MAX head : 26 mwc at 1500RPM , 39 mwc at 1800RPM, MAX dirt passage : 100 mm, , Throughput capacity: 340 m3/h, Max dirt passage: 100 ...

High Pressure Piston Pump Flow Water Pump Manufacturer: UDOR Type: GAMMA 162 TS 1C More information can be found on the manufacturer's website, see pictures. Condition : Used, fully functional Scope of delivery : see the pictures.

YEAR 2023. Equipped with 8 TW type disc filter units operating in parallel. Automatic cleaning system. Two pressure sensors measure the inlet and outlet pressure. SIEMENS PLC with HMI screen for system control.

Water-cooled Three-phase motor Manufacturer: Emod Type: WK132/4-230T 15kW 1430 rpm 13A New part from stock. May show traces of storage.

- Pumping system not included. - Operating conditions of this machine: unchecked. - EX WORKS sale. Disassembly, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-50548-36

WJS NC 3000 T waterjet cutting machine was built in 2002 in Sweden by Water Jet Sweden AB. The high-pressure pump working with the machine has been regularly serviced using only the manufacturer’s original parts. The WJS NC 3000 T is designed for the precision 2D cutting of workpieces made from metal and non-metallic materials, such as ceramics, glass and acrylic. Cutting is performed using pure water or water with an addition of abrasive. The machine is equipped with four cutting heads. The third and fourth heads are mounted on a common Z-axis, with a spacing of 80 mm. This solution allows simultaneous cutting with three heads, which increases cutting efficiency and reduces production time. The WaterJet NC 3000 T is operated using an intuitive NUM 1040 CNC controller. The equipment also includes, among others, an abrasive tank with a feeder and a 100 HP high-pressure pump. All t ...

Used DC GF 3-in-1 filling line, sparking water 6000 BPH, Year 2013Technical Specifications & Performance DataThis used bottling line is configured for PET bottle production and beverage filling, combining a linear blow molding machine, high-pressure compressed-air equipment, an integrated rinsing, filling and capping monoblock, labeling, coding, saturation and shrink-wrapping equipment. The line is designed for industrial packaging of carbonated, oxygenated and non-carbonated beverages.Blow molding capacity: 1,000–2,000 bphFilling monoblock capacity: 4,000–6,000 bph at 0.33LSupported bottle formats: 0.33L, 0.5L and 1.5LContainer material: PET bottles with PCO neck finishComplete line footprint: approximately 11 m × 6 mBlow molder configuration: linear, 2 cavities, 20–50 g preformsFilling monoblock: 18 rinsing stations, 18 filling valves and 6 capping headsAdvanced Automation & Con ...

ESTA OMEGA YBM 25 Water Curtain Wet Paint Cabin Industrial wet-paint spray cabin with water-curtain extraction and ventilation system for enclosed coating operations. Manufacturer: ESTA OMEGA Model: YBM 25 Year: 2018 Serial number: EST-01-010 YBM Power: 15 kW Exhaust capacity: 10,000 m³/h Electrical supply: 380 V Compressed air: 7 bar Configuration: Water-curtain extraction system, enclosed illuminated working area, exhaust/ventilation equipment, control panel, access doors and external ducting Auxiliary air-handling unit: Nusret Klima NKH 15-11, fabrication no. 17932, airflow 17,400 m³/h, motor power 5.5 kW, fan speed 1,300 rpm, motor speed 1,500 rpm Certification: CE marked; TÜV Süd and ISO 9001 markings visible Condition: Used Approximate dimensions: 5,000 × 4,000 × 4,500 mm Approximate weight: 2.5 t All descriptions are indicative only. Auc ...

Power supply: 220V, 1 ph, 50 Hz, Total electrical power: 1,1 kW, Water slot milling spindle motors: 2 x 0,55 kW / 220 V / 3ph / 300 Hz, Air consumption: 9 lt/min, Air pressure: 6-8 bar, Min. machinable profile height: 40 mm, Max. machinable profile height: 120 mm, Max. machinable profile width: 150 mm. Auction-ID: A1-50595-38

Maximum flow rate: 10,8 m³/h, Maximum pumping head: 22 m, Maximum working pressure: 2,2 bar, Liquid temperature range: -5°C to +120°C, Suction connection size: G1¼, Discharge connection size: G1, Motor power: 0,55 kW, Motor power supply: 380Vac / 3 phases, Nominal flow rate: 6,6 m³/h, Nominal pumping head: 17 m. Auction-ID: A1-50595-36

Open-front spray booth with a metal enclosure, rear water curtain panel and lower collection tank. Equipped with a water circulation pump, overhead light fitting and a separate workpiece support stand. Auction-ID: A1-50699-29

OMC Azzurra open-front water curtain spray booth with extraction fan and ducting, water circulation pump, control box and workpiece support. Includes two air-operated paint pumps with pressure regulators and hoses. One pump is labelled Kondal. Auction-ID: A1-50699-24

BBA BA100 wastewater pump 130 m³/h – used pump for pumping wastewater, , For sale: a used BBA BA100 wastewater pump with a capacity of approximately 130 m³/h and a head of 18 mwc (meters water column). This robust pump is suitable for industrial water transfer., , Thanks to its sound-attenuated steel enclosure, this BBA pump is suitable for projects where noise reduction is important. The pump is designed for professional use on construction sites, in infrastructure projects, and for industrial water management applications., , Technical specifications, Brand: BBA Pumps, , Type: BA100, , Capacity: approx. 130 m³/h, Head: 18 mwc, Speed: 1,800 rpm, Year of manufacture: 2006, Net weight: approx. 2,200 kg, Connection: 6-inch Bauer-style (cardan) connection, Configuration: sound-attenuated steel enclosure, , Applications, This BBA BA100 wastewater pump can be used for:, , Pumping wastewa ...

Including thickness 5x 12mm and 19x 18mm Auction-ID: A1-50226-92

Including Macko and Miele, complete with OASIS water dispenser Auction-ID: A1-50226-209

Removes oil from your compressor condensate, The Alup OWS 18 collects the condensate from a screw compressor, dryer or receiver and separates out the oil. The water that is left can then usually go straight into the drain, so you do not have to have oily condensate taken away., The separator was built in 2021, weighs 6.8 kg empty and is compact enough to sit next to the compressor., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/alup-ows-18-oil-water-separator/, Type: Oil-water separator for compressor condensate, Filtration: Oil filter and activated carbon filter, Weight: 6.8 kg (empty)

This BBA PT150 with strong 4 kW electric motor can be used well on large construction projects, where the power supply is often well regulated. Then this PT150 with electric motor is a good choice., Environmentally friendly, not much maintenance, so an investment that pays for itself quickly., This PT150 is electrically powered and built into a robust galvanized stacking frame., , Max. capacity : 60 (m3/hour), Max. head :20 (mwc), Max. suction height : 9.6 (meter), , Throughput capacity: 60 m3/h, Max. head: 20 MWK, Max dirt passage: 1485 rpm, , = More information =, , Year of manufacture: 2016, Applicable material: Water, Empty weight: 1.175 kg, Connector size: 4, Cargo space capacity: 1.500 l, Technical condition: good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for m ...

Date of Manufacture: 08-2021 Serial No.: M150140000 Dimensions: 856 x 648 x 551 mm (34 x 25.5 x 22 inches) Empty Weight: 50 kg (110 lbs) Loaded Water Mass: 180 kg (400 lbs) Maximum Flow Rate: 1.9 L/min (0.5 gal/min) at 27.5 MPa (4,000 psi) Maximum Pressure: 27.5 MPa (4,000 psi) Maximum Water Temperature: 54 °C Maximum inlet pressure: 0.86 MPa (125 psi) Main unit: 100-240 VAC, 50/60 Hz, 2.0 A, 100 W, IP 32 Total power (unit + pump): 1.8 kW at 110 V / 2.3 kW at 220 V Auction-ID: A1-50714-4206

more details see photos Auction-ID: A7-50868-151

Used AMER filling line for still water PET, 5000 BPH, 2 blowersTechnical Specifications & Performance DataThis used bottling line is configured for still water in PET bottles and combines bottle production, conveying, rinsing, filling, capping, labeling and secondary packaging. The line includes two SMF COMBI 400 automatic PET bottle blow molding machines, an AMER rinsing-filling-capping monoblock, a SACMI LABELLING OPERA 200 RF labeling machine and an AMER shrink wrapper.Filling capacity: 4,000–5,000 bph for bottles with 30/25 mm necks.Blowing capacity: up to 4,000 bph on 1.5L bottles through two SMF COMBI 400 blowers.Labeling capacity: 12,000 bph.Shrink-wrapping capacity: 300 packs/h.Bottle range: 0.25L to 2.5L for the blow molding section.Available mold formats: 0.33L, 0.6L, 1.5L and 5.0L, depending on the machine section.Filling monoblock configuration: 16/18/6.Required installed p ...

Used TEHNOMETAL glass still & sparking water filling monoblock line 7500 BPHTechnical Specifications & Performance DataThis used bottling line is configured for still and sparkling water in glass bottles. The complete industrial packaging line includes a glass bottle filling monoblock, labeling machine, packaging machine and connecting conveyors. It is designed for 0.25L and 0.75L glass bottle formats with MCA 28 neck finishes and aluminum caps.Filling monoblock capacity: up to 7500 bphLabeling machine capacity: up to 12000 bphPackaging machine output: 20 tacts/minFilling monoblock year: 2020Labeling machine year: 2020Packaging machine year: 2016Glass bottle formats: 0.25L and 0.75LClosure type: aluminum capAdvanced Automation & Control SystemsThe line incorporates dedicated processing, labeling and secondary packaging equipment connected by conveyors for continuous bottle transfer. The  ...

Free-standing side-by-side fridge-freezer combination in black with a total volume of 528 litres, of which 347 litres are refrigerated and 181 litres are freezer compartments. Total No Frost prevents ice formation and eliminates the need for manual defrosting. Multi Air Flow distributes the cooled air in the interior. With inverter compressor, super cool function, electronic temperature control, LED interior lighting and door alarm. The integrated ice and water dispenser is supplied via a water tank; a mains water connection is not required. Energy efficiency class: E Energy consumption: 312 kWh/year Noise level: 40 dB(A) Freezing capacity: 10 kg/24 hours Dimensions (H × W × D): approx. 178.6 × 91.1 × 61.5 cm. Auction-ID: A1-51007-101

System including: 1 x PDA Detector 1 x Column Manager 1 x FTN Sample Manager 1 x Binary Solvent Manager The system is sold without a computer and without software. Auction-ID: A1-50979-101

System including: 1 x TÜV detector 1 x Column Manager 1 x BioSample manager FTN-H 1 x bioQuaternary Solvent Manager The system is sold without a computer and without software. Auction-ID: A1-50979-50

Including: 1 bioSample Manager FTN-H 1 PDA Detector 1 Binary Solvent Manager 1 solvent tank Auction-ID: A1-50979-117

Generous LG side-by-side fridge and freezer, model GSL481PZXZ, with Total NoFrost as well as ice, crushed ice and water dispenser. Thanks to the integrated 4-litre water tank, no mains water connection is required. Model equipment and technical data according to the manufacturer: • Total usable capacity according to current standard: approx. 625 litres • Cooling area: approx. 411 litres • Freezer area: approx. 214 litres • Total volume according to the previous standard: approx. 601 litres • Total NoFrost – no regular manual defrosting • Ice cube, crushed ice and water dispensers • Internal water tank: approx. 4 litres • No fixed water connection required • Inverter Linear Compressor • MultiAirflow circulating air cooling • Moist Balance Crisper for fruits and vegetables • Express Freezing • Smart diagnosis function • LED lighting in the refrigerator and ...

Freestanding LG side-by-side refrigerator with a usable capacity of 591 liters. The integrated water and ice dispenser offers chilled water, ice cubes and crushed ice. Thanks to the 4-liter water tank, no fixed water connection is required. Equipment and technical data: • Model: GSL361ICEZ • Total usable capacity: 591 litres • Cooling area: 394 litres • Freezer area including additional compartment: 197 litres • Total No Frost • Multi-airflow circulating air cooling • Inverter Linear Compressor • Rapid cooling and quick-freezing function • LED interior lighting • Smart Diagnosis • Freezing capacity: 12 kg/24 hours • Dimensions (H × W × D): 179 × 91.2 × 71.7 cm • Weight according to nameplate: 124 kg Auction-ID: A1-51007-9

Professional undercounter glasswasher Hobart PROFI GXS-11A for bars, cafes, restaurants and hotels. • Integrated water softening • Basket size: 500 × 500 mm • Insertion height: 425 mm • Wash programs with 60, 90 and 120 seconds as well as special programs • Nominal capacity: up to 60 baskets per hour • Fresh water consumption: approx. 2 litres per basket • Fuel tank capacity: 10.6 liters • Integrated detergent and rinse aid dosing as well as drain pump • Year of construction according to nameplate: 2017 • Connection according to nameplate: 400 V, 50 Hz, 3N • Connected load: 7.7 kW; current consumption: 15.9 A Dimensions (H × W × D): approx. 82 × 60 × 60 cm. Height adjustable by up to 4 cm via the adjustable feet. Auction-ID: A1-51007-4

FRIGADON FWC-90-TREV ist ein Wasserkühler, ausgelegt für Präzision, hohe Genauigkeit und zuverlässigen Betrieb. Konkrete Arbeitskapazitäten sind in den vorliegenden Angaben nicht enthalten; das Gerät dient der thermischen Stabilisierung industrieller Prozesse. Haupttechnische Daten: Anschluss 50 Hz, 3x: 400 Volt. Es gewährleistet thermische Stabilität zur Erreichung enger Toleranzen und eignet sich für Branchen wie Automobil, Luft- und Raumfahrt, Medizintechnik und Maschinenbau. Technische Daten ohne Gewähr

Power supply 230 V ~ 50 Hz Power 550 W Flow rate 17,000 l/h Connection diameter 5 cm Length of supply line 8 m Maximum height 8 m Auction-ID: A7-50796-148

Power supply 230 V ~ 50 Hz Power 550 W Flow rate 17,000 l/h Connection diameter 5 cm Length of supply line 8 m Maximum height 8 m Auction-ID: A7-50796-248

The 12V submersible pump can be used for fast refueling of diesel fuel, transfer of water and fluid oils from storage tanks to various vehicles without leakage. Auction-ID: A7-50796-412