hot rolling mill used for sale

vibratory feeder diameter range 10 mm shaft length under head 180 mm max. thread length 80 mm output - pieces/min 400

vibratory feeder diameter range 6-12 mm shaft length under head 180 mm max. thread length 80 mm output - pieces/min 100-330

vibratory feeder diameter range 8-16 mm shaft length under head 150 mm max. thread length 83 mm output pieces/min 120

vibratory feeder diameter range 10-20 mm shaft length under head 16-180 mm max. thread length 105 mm output pieces/min 100

diameter range 1,6-4 mm shaft length under head 50 mm max. thread length 30 mm output pieces/min 300-750

vibratory feeder diameter range 2,5-6 mm shaft length under head 80 mm max. thread length 40 mm output pieces/min 600

vibratory feeder diameter range 4-12 mm shaft length under head 150 mm max. thread length 105 mm output pieces/min 80-260

tube feeder for studs and headless parts diameter range 6-12mm shaft length under head 95 mm max. thread length 90 mm output pieces/min 55

vibratory feeder diameter range 3-8 mm shaft length under head 80 mm max. thread length 55 mm output pieces/min 300

vibratory feeder diameter range 3-8 mm shaft length under head 80 mm max. thread length 55 mm output pieces/min 300

vibratory feeder diameter range 6-12 mm shaft length under head 170 mm max. thread length 102 mm output pieces/min 125

Large slewing bearings, slewing ring, single-row ball slewing ring, four-point bearing -comes from: HUSS Rides, manufacturer of leisure facilities -Replacement part: from Top Junior 70011-15 -Manufacturer: Rothe Erde -Type: 2-060-40-0490-001 63132-609 -Type: 2.060.40.0490.001 63132.609 -Outer diameter: 625 mm -Inner diameter: 354 mm -Height: 90 mm -Quantity: 3x available in storage -Price: per piece -Weight: 122 kg

Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Model UM900 Conditie Gebruikt Voorraad nummer 2360 Belt width 900 mm Power 3 x 400V, 50Hz, 16A Dimensions 1550 x 1200 x 1700 mm

ORT RP30 C thread rolling machine 2-roll 30 tons electronic control of pressure (Ton), speed and position. Brushless motors for the rotation of the rollers Possibility to memorize the parameters for the piece., The machine is visible working in our warehouse in Gussago BS. Test possibility Mimu Machine Tools Rolling is a mechanical processing without chip removal that can be performed cold or hot, having as an aim the improvement of the surface finish (therefore the apathetic behavior of the material., Power (Ton): 30, Number of rollers: 2, PLC: YES

The rolling storage box is a robust handling equipment, designed for the storage and transport of equipment in a professional environment. Sold as is, this model has dimensions of L172 x W105 x H190 cm for a weight of 260 kg, offering a large storage capacity and a structure suitable for intensive use in workshops, warehouses or production areas. Auction-ID: A1-44765-348

A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible.

Cat.-Nr. 11-370-2 new double jacket and insulated Volume: 2400 Litres - Parts in touch with product in AISI 316 – other parts in AISI 304 without Heating Jacket Material: Parts that come in touch with the product in V4A (AISI 316) – other parts in V2A (AISI 304) Max.Working Pressure. 0,49 bar Surface fully pickled, passivated and neutralised Insulation with Mineral Wool for Hot Water Tanks Thickness = 80 mm Standard Equipment: Manhole on the top Air Release and Pressure Valve in PVC Manhole inside oval 400 x 350 and Manhole outside rectangular for insulation jacket Sample Valve Level Indicator 24 mm Ladder Support Outlet Discharge with Outlet Pipe DN 50 Digital Thermometer Clear Outlet DN 50 Transport Hooks with Insert Heating Element 230/400V, 7,5 kW Diameter: 1350 mm Height: 3130 mm Cyl. Height: 2160 mm F ...

Cat. No. 11-3170 New without heating jacket - round standing on feet Medium-contact parts V4A (AISI 316) with electric screw-in heating 230/400 V, 7.5 kW Standard: Material: medium-contact parts V4A (AISI 316) - otherwise V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Insulation made of mineral wool for hot water tanks thickness = 80 mm Standard: Manhole top DN 400 Ventilation and vent valve made of PVC Manhole inside oval 440 x 350 and manhole 500 x 430 outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with forward-drawn outlet pipe DN 50 with disc valve DN 50 with lid Digital thermometers Clear drain DN 50 with disc valve with lid Transport eyelets with electric screw-in heating, 230/400V, 7.5 kW Cat. No. Contents  ...

Machine is in perfect condition. All mechanical, electric parts were overhauled or changed to completely new. Along with the machine we provide 1 set of equipment for a clients bottle and basic change parts for a 2 years production. Capacity: 22500 b/h 18 months guarantee.

1 of used hot-melt unit, make Nordson, type 3700-2BB36. Tank capacity 13.6 kg, melt rate 18.1 kg/hour. Suitable for 380-415/220-240V, 50/60Hz. With Pneumatic piston pump 21:1, non-recirculating manifold for 6 hoses witih standard filter, Multiscan controls for 6 hoses and guns. Hoses and guns NOT included. New 1990.

for the storage of hot water / firefighting water. Dimensions: 2.50 m = D - L = approx. 10.70 m The container is used, empty inside and professionally cleaned and is outside with a coat of bitumen / bitumen insulation provided. Light insulation damage caused by construction and transport may be available at the reservoir. Price from Söhrewald - free of charge-

Make : Wolf Type: WLE-S-180 Built: 1993 Dimensions: 1.3 m x 2.2 m x 2.6 m (approx. WxLxH) Heating unit: 209 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 14,000 m3/h; 7.5 kW; 1435 rpm Location : Camp Herzogenaurach Sales price: € 2,990,- net, from location This plant is already on sale, similar we have in stock. We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please contact us, tel. 0171-9508841.

Metallography Mounting presses ECOPRESS All ECOPRESS presses can be programmed by the user in a simple manner, that the mounting process runs fully automatically. When the ECOPRESS 50, one program can be stored in the control electronics. A rugged bayonet allows quick and safe operation. The ECOPRESS series offers a wide variety of different size of molds of 25 - 50 mm in diameter. At the same time two samples can be embedded per cylinder with an intermediate piston. Alternatively, machine type of ECOPRESS 200 twin-piston for up to at the same time 4 embeds is available. When baked in the samples into plastic granules are melted, that the sample under heat and high pressure wraps pore-free and then through a press cylinder, electronic control, integrated cooling for solidifying. ECOPRESS 50 one cylinder, electronic control, full automatic program ECOPRESS 100 one pressing  ...

1 used Nordson order head, type Mini Blue II SureBead, 230V / 100W, with solenoid valve and 40-degree connection, built in 2013. 10 pcs. available (intermediate sale reserved).

1 used Nordson 16 foot hose, Blue Series, 240V/504W. Built 2013. Nordson part number 2747976. 6 pieces available (intermediate sale reserved).

Nordson 3100-2AA32; State as is; only checked for function; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

1 used Nordson 24 foot hose, Blue Series, 240V/760W. Built 2013. Nordson part number 274797. 6 pieces available (intermediate sale reserved).

maximum format 1060 x 800 mm min. size 350 x 350 mm Speed 80 m / min. Paper thickness 105-500 grams Energy 101 kw Weight 8500 kg Mass 8860 x 2380 x 3000 mm

COMPLETELY WORSHOP REFURBISHED ! Min. size 350 x 500 mm / 920 x 1260 mm Speed of 5,000 c / h Quick clamping system in the stripping station Paper 80 g / m2 Cardboard max 2000 g / m2 16 heating zones Temperature 50 ° to 160 ° Autoplaten concept Stripping

Hot water buffer tank with insulation Year of construction: 2011 Condition: Used Specifications Connections: 4 screw-ins for immersion sleeves: inner diameter 1/2" 2 flange connections: inner diameter 80 mm 1 filling neck: inner diameter 1 1/4" Metrics Height: 3,550 mm (boiler only) Diameter: 1,198 mm Circumference: 3,765 mm Volume: approx. 3,982 m³ Operating pressure: max. 4 bar Weight: approx. 500 - 600 kg Insulation: 160 mm The buffer tank has been reworked on the outside with rust protection and 2 coats of paint. Transport can be arranged through our house on request! Price: € 3,900.00 plus VAT ex Grunow site (Brandenburg) (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Nominal force: 6300 ton Number of continuous strokes per minute: 40 Ram stroke: 460 mm Distance between ram and table (table is in upper position): 1150 mm Table adjustment: 15 mm Distance between press columns: 1950 mm Ram dimensions: -front to back: 1680 mm; -left to right: 1680 mm Table dimensions: -front to back: 1950 mm; -left to right: 1920 mm Mechanical upper ejector: -max stroke: 100 mm; -number of positions: 1 -steps of stroke adjustment: 25-30-75 mm -force: 30 ton Pneumatic lower ejector: -max stroke: 300 mm -stepless stroke adjustment: 15-300 mm -number of positions: 3; -force: 65 ton Side windows dimensions: -width: 1100 mm; -height: 1280 mm Main motor: 400/590 kW/rpm Press layout dimensions: 6300x8965 mm Total height: 11125 mm Height above floor level: 9150 mm Total weight: 626100 kg

Hot counter + refrigerated counter on undertable with casters Dimensions undertable: H95 x W193 x D76 cm Hot Counter BETEC Execution: Hot counter GN 2/1 230V / 50 Hz Heat output up to 90°C the hot counters are lit up Total dimensions: H55 x W75 x D78 cm Year of Make: 2019 Chilled distribution depot: Bartscher Batida 2/1 Refrigerated display case / cold counter 2 x GN 1/1 with squared glass version 406051 This refrigerated display case / show display case from Bartscher is a guarantee for your good product presentation. Dimensions (W/D/H) cm: 75 x 77.5 x 60 cm Weight: 78.6 kg Capacity: 1 x GN 1/1-6.5 cm height (53x32.5cm) Technical services: Temperature range: +6ºC / +10ºC Version with convection cooling including lighting Connection: Connected load: 230 V /0.29 kW 1 phase / 50 Hz / 16 A with plug in Schuko design ...

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

freestanding

Hot foil stamper, available now, fully workshop refurbished, ready to test • ELEVATED MACHINE Machine elevated 415 mm, included elevation of the steps • Step • Centerline for job quick change • Electronic device for sheet travel control • Air conditioning for the electrical cabinet • Gripper bars • Bobst-electronic for managing the machine • Motore principale con variatore di frequenza • Pianale porta-pila con leva per la correzione laterale manuale della pila durante la produzione • NON-STOP FEEDER MANUAL DEVICE • Adjustable lateral blowers with Centerline references • Suction unit with multiple adjusting • Safety system for lowering the pile try • Introduction table covered by antistatic steel stainless plate • Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle • Feed belt slow-down device Ensures  ...

Qty. 1 Second-hand crank hot forging press – dismantled & in storage Mfc.: Hyunjin Industry, Korea Built: 2008 Status: dismantled and in storage Force: 2500 T Total weight of the machinery: approx. 250 T

9482023 Hot Water Boiler Plant Schmid 2400 kWth with moving step-grate This Schmid boiler features a durable, electronically controlled, water-cooled moving grate, designed to burn a wide range of fuels from wood pellets to wood chips and waste wood. Installed in 2012, the plant operated on wood pellets until December 2022. It is a complete system in good condition, housed in a concrete-element building, with two large pellet silos and a hot water accumulator tank for heat load balancing. These auxiliary components are optionally available to interested buyers. The boiler is equipped with load-controlled primary and secondary combustion air fans, as well as a speed-controlled exhaust gas fan, ensuring high combustion efficiency and low electrical power consumption. The two-stage combustion design minimizes NOx emissions. Its robust triple-layered ceramic and steel combustion ...

2 Hot melt glue machine Meler, glue melter, 5 liter hot melt glue - used - : Price per piece from location: only 2.950.-€ (net)! Manufacturer: Meler Type: Micron 5 Year of manufacture: 2018 Ref.: 101002240 Micron 5/4 N Serial number: e.g.: 1J800918 Outputs: 4 TANK CAPACITY: 5.15 liters MAXIMUM ALLOWED BLOCK VOLUME DIMENSIONS OF 192 mm DIMENSIONS W 182 mm DIMENSIONS C 106 mm MAXIMUM MELTING CAPACITY: 9 kg/h () PUMPING CAPACITY 29.3 kg/h pump 7 cc () 66.0 kg/h Pump 19 cc () NUMBER OF OUTPUTS: 4 TEMPERATURE RANGE: 0 A 200°C (104 A 392°F) Optional: 40 A 230°C (104 A 446°F) TEMPERATURE CONTROL: RTD ± 0.5°C (± 1°F) MAXIMUM OPERATING PRESSURE (AT 6 BAR): 81.6 bar (1,183 psi) DIMENSIONS (L X A X H): 587 x 341 x 481 587 x 341 x 628 (lid open) WEIGHT: 37.5 kg (without filling) 1-N/PE 230V, 50/60 Hz, 7.1 kW 3-N/PE 400/230V, 2.4kW, Condition: good Avail ...

Hot melt adhesive application system Adhesive Application, Hot Melt Glue Gun Make HBB Heinrich Bühnen GmbH Type WCH 1146 CE Serial No. 46-1007-04 PROline tank system Year of construction approx. 2004 Maximum power consumption approx. 1860 watts Electricity connection 230 V Current consumption 8 A Protection class IP 32 Electronic temperature controller grado 905 Operating temperature 135 – 230°C Heating capacity tank 1200 watts Melting capacity 4.5 kg/h Warm-up time approx. 20 minutes Hot melt adhesives as granules or block goods Usable tank volume 4.5 liters With heated hose type HP With hot melt adhesive hand applicator With instruction manual

Machine Type: Hot Air Welding Machine Manufacturer: Pfaff Type: 8304 Year of Make: 2002 Condition: used / in working order Offer will only be sent if a complete imprint is provided! Price 2.750 Euro incl. 19% VAT 2.310,92 Euro net Location Warstein , Germany Reference M-PFA-1125-4 DESCRIPTION We offer you a used hot air welding machine from the manufacturer Pfaff. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

NOTE additionally a new shaft Description Force , 4000 TN Slide stroke, mm 400 Number of continuous slide stroke, stroke / min 50 Closed height of stamping space mm 1000 Adjusting the table mm 15 Distance between columns in light,mm 1660 Drive power, kW 185 Table dimensions in plan mm: - From left to right in 1620 - Front-to-back in 1570 Dimensions in mm: - in the plan 6100 x 4710 - Height above floor level 6820 - Press height 8680 Weight, t 377

MEGAPLOT OF1515 Roof Master EPS cutting machine was built in 2019 in Poland by Megaplot J.Wójcicki M.Jagła SJ. The machine represents the MEGAPLOT Open Frame series, which has been specially designed for the efficient production of any type of slope roof plates made of polystyrene. The machining process is performed by means of hot wires mounted on two independently moving arms. Intuitive operation of the machine is ensured by the proprietary MegaRoofer software, which allows for simple preparation of machining projects. All you need to do is enter a few necessary parameters and the programme will automatically generate a ready-to-cut project. The MEGAPLOT OF1515 hot wire cutting machine is offered with a wide range of equipment, including a barcode scanner and rotary table. Technical specifications of the MEGAPLOT OF1515 Roof Master polystyrene cutting machine - work area (L x W x ...

KELLER K-Roll ROTO 2 hot foil stamping machine was built in 2018 in Poland by KELLER poligrafia dla przemysłu Sp. z o. o. Sp. K. The machine is used in the printing industry for printing cylindrical parts by hot stamping. Hot stamping is a special printing method in which a special foil is transferred onto the material at high temperature and pressure. This results in gold- or silver-plated patterns, ideal for enhancing many products, such as business cards, diplomas or invitations. The KELLER K-Roll ROTO 2 performs the entire process fully automatically. Workpieces are fitted into the holders of the rotary table by means of conveyors and manipulators. The work table rotates two positions at a time, transferring them to the following de-ionisation and printing stations. At the end of the cycle, the parts are ready to be picked up on the outfeed conveyors or slide down the ramp into t ...

Falch Aqua Speed Pressure Washer 300bar, 98 °C Top condition B driving licence suitable - Manufacturer: Falch - Type: Aqua Speed 750tdh - YOC: 2010 - Working pressure: 300 bar - Volume flow: 18 l/min - Cold and hot water up to 98 °C - Operating hours: approx. 685 h Accessories: - Optional Price plus VAT Additional options (subject to surcharge) - Europe-wide delivery - Falch Scater - Pistols - Hoses - Nozzles For more data, please refer to the pictures. The item can be viewed and tested before purchasing. Equipment location: 9554 St.Urban We are also happy to accept your machine in trade-in.

FlowCook completely stainless steel suitable for thermo-oil heating Belt length ± 13,000 mm Track width ± 600 mm Executing belt Belt washing system electric lifting device for the cap Total dimensions (L x W x H) : ± 15,000 x 2,200 x 3,000 mm

HOT AIR GENERATOR by wood . NEW machines in prompt delivery model F28 , F55CV , F85CV , F120CV Availability : ready in stock ( unless sold ) CE mark : Yes Declaration CE : Yes Instruction Manual ( Yes )