hot press used for sale

Press pressure: 300 ATM, with oil pump unit, including rack with 6 outrigger plates, plate size: L1370 x W660 mm Auction-ID: A1-50060-11

Extension: 130mm, including 3x box Nesting (1450R) + Stamps, various colors Auction-ID: A1-50060-160

maximum pressing force: 160 tons, working pressure: 16 MPa, upper table surface: 700 x 450 mm, lower table surface: 900 x 630 mm, maximum clearance between lower table and slide: 1000 mm, cylinder stroke: 500 mm, downward speed: 200 mm/s, upward speed: 125 mm/s, power requirement: 17 kW, oil tank capacity: 500 liters Auction-ID: A1-50601-51

press pressure: 1500 KN, punched surface dimension: L1700 x W1065 mm, equipped with Sick optik electronik personal laser curtain protection, 1x oil pump generator and safety fencing, 1x spare base plate Auction-ID: A1-50060-12

Hochdruck-Systeme HPTC130-300 ISO High-Pressure Testing System Manufacturer: Hochdruck-Systeme GmbH Model: HPTC130-300 ISO Year: 2011 Equipment type: High-Pressure Testing System Certification: CE marked Location: 91701 Trnava Industrial high-pressure testing system designed for pressure testing of components under controlled pressure and temperature conditions. Equipped with high-pressure test chambers, hydraulic power unit, pressure gauges, electrical controls and associated high-pressure tubing. Technical specifications: Working pressure: 1,300 bar Test pressure: 2,240 bar Chamber volume: 1.08 L Operating temperature range: 18–300°C Maximum clamping force: 15,000 kp Equipment: High-pressure test chambers Hydraulic power unit Pressure gauges Electrical control system Associated high-pressure tubing Condition: Used only a few times and reported to  ...

Key data: 200 t

Manufacturer: Müller Model No.: CE 200.1.1 Year: 1972 Condition: Used Stock number: 9604 Compressive force: 200 t

HYDRAULIC PUNCHING PRESS Inv. No. 13.085P1 Make SAHINLER Model HKM40 Capacity 40 Ton Punching Ø 20 in 15mm Stroke 50 mm Radius 175 mm Round cutting 30 mm Square cutting 25 mm Angle bar 80 x 80 x 8 mm Flat bar 200 x 13 mm 300 x 6 mm Blade length 356 mm Motor power 3 KW Weight 580 Kg Auction-ID: A1-50718-39

Qty. 1 Second-hand extrusion pres line – in storage Mfc.: Tuerkish Co., Rexroth, Siemens Force: 1600 MT Built: 1996 Billet dia.: 6”, 157 x 560 mm Main Cylinder Dia.: Ø395 mm PLC: Siemens, S7 – 1500 Press presusre: 315 bar Hydraulic System: Rexroth Main Press Motor: 110 kW – 1,400 rpm Main Pump: Rexroth A4VSO 125 Auxiliary Pump Motor: 75 kW – 1,400 rpm Auxiliary Pump: Rexroth A2F016 Container Pump: 5.5 kW – 1,400 rpm – Rexroth A2F016

Qty. 1 Second-hand extrusion pres line – in storage Mfc.: Tuerkish Co., Rexroth, Siemens Force: 900 MT Built: 2007 Billet dia.: 5”, 127 x 390 mm Main Cylinder Dia.: Ø395 mm PLC: Siemens, S7 – 1500 Press presusre: 315 bar Hydraulic System: Rexroth Main Press Motor: 90 kW – 1,400 rpm Main Pump: Rexroth A4VSO 125 Auxiliary Pump Motor: 7 kW – 1,400 rpm Auxiliary Pump: Rexroth A2F016 Container Pump: 5.5 kW – 1,400 rpm – Rexroth A2F016

SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.421PC Make IWK Model PEKRON 150Z Machine No. 1512 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified Auction-ID: A1-50718-64

LVD PPEB 220 Hydraulic Brake Type: Industrial Hydraulic Press Brake Brand: LVD Model/series: PPEB Bending force: 220 tons Control: Numerical / Electronic Control Actuation: Hydraulic Use: bending and forming of sheet metal and metal parts Marking: CE Manufacture: LVD Company N.V., Belgium Please note that the tools are not included in the sale Auction-ID: A3-46137-35248

SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.420PC Make IWK Model PEKRON 150Z Machine No. 1501 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified Auction-ID: A1-50718-63

Submersible pressure priming pump 5900/4 for watering work, even for water extraction from great depths up to 12 m. With up to 5900 l/hr and a working pressure of 3.5 bar, this powerful submersible pump can run up to three large nozzles simultaneously. Thanks to the small diameter of 149 mm, it is very suitable for use in wells with a diameter of 150 mm. Included: 20 m long fastening cord and the 15 m long connection cable. The 5900/4 stainless steel pump is equipped with a robust stainless steel housing and a stainless steel connection. This protects the pump during underwater operation and ensures stability. Thanks to the large volume filter, the pump and the connection equipment do not become clogged or damaged The pump can also be used with a floating suction set, when sediments form on the bottom. . Thanks to the float switch, the pump is protected when the reservoir is empty; This  ...

General SKU328Y708 MakeEstrella TypeST.EM No.87497 Year of construction1987 Mounted on legscheck Pressure Working pressure6 Bar Number of vertical pressure tanks1 Main Features MaterialGlass Volume4210 Ltr. Pressure6 Bar Specified Features - Pressure vessel Capacity4210 l Vessel sizesDia. 1600x2200 mm Dished bottomcheck ManholeDN600 Top connectionscheck OutletDN70 Max. temperature-10°c/+200°C MaterialGlass - Enamel General LocationBarneveld Floorspace1,60 x 1,60 m Total height3,80 m Weight2000Pressure vesselsFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPINew arrivalsGeneric medicinesEstrellaTanks > Pressure vesselsIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyIndustries > Chemical > Pl ...

General SKU328Y709 LocationBarneveld MakeEstrella TypeST.EM No.91989 Pressure Working pressure6 Bar Number of vertical pressure tanks1 Main Features MaterialGlass Volume4210 Ltr. Pressure6 Bar Specified Features - Pressure vessel Capacity4210 l Vessel sizesDia. 1500x2200 mm Dished bottomcheck ManholeDN550 Top connectionscheck OutletDN80 Max. temperature-10°C/+200°C MaterialGlass - Enamel General Year of construction1991 Mounted on legscheck Floorspace1,60 x 1,60 m Total height3,00 m Weight1900 Extra Specifications- with CIP line (Hastelloy C-22)Pressure vesselsFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPINew arrivalsGeneric medicinesEstrellaTanks > Pressure vesselsIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustrie ...

General SKU328Y712 MakeEstrella TypeST.EM No.91979 Year of construction1991 LocationBarneveld Pressure Working pressure6 Bar Number of horizontal pressure tanks1 Main Features MaterialGlass Volume2830 Ltr. Pressure6 Bar Specified Features - Pressure vessel Capacity2830 l Vessel sizesDia. 1200x2600 mm ManholeDN600 Top connectionsDN50, DN100, DN125 OutletDN100 Max. temperature-10°C/+200°C MaterialGlass - Enamel (TPE-2000) General Floorspace1,20 x 2,80 m Total height1,80 m Weight1550 kgPressure vesselsFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPINew arrivalsGeneric medicinesEstrellaTanks > Pressure vesselsIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > BiotechnologyIndustries > Chemical > Plastic & poly ...

Standard configuration Machine ⦁ Box frame ⦁ Press beam ⦁ Spherical bearing of the press beam with press beam tilting ⦁ Electro-hydraulic upper drive ⦁ Block hydraulics ⦁ Distance measurement system (Y axis) with dynamic deflection compensation ⦁ Hydraulic oil filling (life-long filling) ⦁ Oil cooler Crowning ⦁ Self-regulating, combined crowning Backgauge ⦁ Gauge fingers (2 pieces) Tool clamping ⦁ Manual upper and lower tool clamp Control ⦁ T3500T Multi-Touch machine control ⦁ Integrated TRUMPF technology data Data transmission ⦁ USB interface ⦁ RJ45 network interface Operation ⦁ Operating unit with foot switches Safety ⦁ CE marking ⦁ Standard safety device Additional equipment Crowning ⦁ CNC crowning Backgauge system ⦁ 5-axis backgauge system : R1, Z1, Z2, X1, X2 (Delta X) Tool clamping ⦁ Hydraulic upper tool clamping Contr ...

Offer 26338 Technical data: - max. Working length 3340 mm - Column passage 2600 mm - Max. pressing force 100 t - Projection 400 mm - Max. stroke 100 mm - max. Installation height 370 mm - Table height approx. 960 mm - Feed speed / rapid traverse 85 mm/s - Press speed 10 mm/s - Retraction speed 80 mm/s - Drive power 9.5 kW - Space requirement approx. W 3500 x H 2350 x D 1950 mm - Weight approx. 6.8 t - with: - CNC control DELEM DA 58 - Back gauge 0 - 600 mm

The machine is in good technical condition; testing is possible by prior arrangement. Vertical hydraulic press with hydraulic power unit. Power supply: 400 V, three-phase. Motor power (per nameplate): 2.5 HP. Control system: Electrical cabinet with Siemens LOGO! mini PLC. Weight (per nameplate): 1,500 kg.

COMET SC 145 floor cleaning brush, an accessory for pressure washers. Compatible with Comet KRM and Comet KRS models. New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-42

The machine is in good technical condition; testing is possible by prior arrangement. Vertical hydraulic press with a built-in 15-ton hydraulic power unit. Operating mode: semi-automatic. Power supply: 400 V, three-phase, 50 Hz. Motor power: 4 kW. Controls: digital pressure regulation; downward, upward, and rapid traverse movements. Weight (per nameplate): 700 kg. According to the section of the manual covering intended use, this configuration is designed for compressing filters with a diameter of 210 mm and a height of 1,090 mm.

Number of conrods 2 Table dimensions ( x-y/mm) 3700 x 2200 Stroke (mm) 600 Slide Adjustment (mm) 250 Light at T.D.C.(mm) 1400 Stroke per minute 3-12 Motor Power (kw) 135 Accessories frontal moving bloster Cushion number 3 Cushion type pneumatic Cushion stroke (mm) 200 Cushion power (ton) 50 x 3

Used frame assembly press (model N1071/1253) for assembling wooden frames, carcasses, panels and glued timber parts. - Hydraulic clamping system - Motor: 3 HP / 380 V - 4 vertical cross members (traverses) - Useful working dimensions: height 1.5 m, width 3.25 m - Overall dimensions: height 2.80 m, length 3.80 m, depth 1.10 m - In working condition Auction-ID: A7-50988-157

70mm head Auction-ID: A1-50476-128

GECHTER 8/12 HKPV toggle press. Condition: Condition as shown in the photographs. The machine is offered in untested condition. Missing or damaged parts may be present. Completeness, functionality and quality have not been verified. Auction-ID: A1-50992-4

Equipped with high-pressure cleaner; Auction-ID: A1-50476-185

Wet carpet cleaning pad model JET 5 for pressure washers, with 2 nozzles and an aluminium pole, supplied with hose. Brand is not confirmed for this specific unit. New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-47

Pressure 20 bar, max flow rate 360 l/h, never used Overall dimensions: 300 x 300 x 700 mm Weight: 10 kg Auction-ID: A7-50798-316

Foot control, Auction-ID: A1-50476-13

GECHTER 8/12 HKPV toggle press. Condition: Condition as shown in the photographs. The machine is offered in untested condition. Missing or damaged parts may be present. Completeness, functionality and quality have not been verified. Auction-ID: A1-50992-3

\" ELMALI EHSP-150 Hydraulic Deep Drawing Press Manufacturer: Elmali Makina Sanayi ve Ticaret Ltd. Sti. Model: EHSP-150 Machine type: Hydraulic Deep Drawing Press Year: 2021 Serial number: EHSP-150/150 S.01 Certification: CE compliant Working hours: 0 h Heavy-duty hydraulic press designed for deep drawing, stamping and forming of sheet metal. The machine is reported as never used, with 0 working hours. Equipped with ELMALI touchscreen control, separate control cabinet and remote operator station. Technical specifications: Press force: 150 tons Motor power: 30 kW Table / ram dimensions: 1,000 × 1,200 mm Stroke: 600 / 250 mm Hydraulic oil: ISO VG 46 Approx. dimensions (L × W × H): 2,200 × 1,900 × 4,300 mm Machine weight: Approx. 10,500 kg Equipment: ELMALI PLC touchscreen control Separate operator control cabinet Remote operating station Hydraulic po ...

garage press Type: Hydraulic Workshop Press Press force: 20 tons Cylinder stroke: 175 mm Working range: 0 – 910 mm Working width: 535 mm Operation: Hydraulic Hand Pump Frame: Heavy-duty steel H-frame construction with reinforcement plates Cylinder: Large diameter hydraulic cylinder, low working pressure Press stamp: hardened and chrome-plated Work table: height adjustable with support pins Pressure gauge: Integrated pressure gauge Safety: pressure relief valve against overload Weight: approx. 98 kg Condition: Unused Auction-ID: A3-46137-1264

GECHTER 8/12 HKPV toggle press. Condition: Condition as shown in the photographs. The machine is offered in untested condition. Missing or damaged parts may be present. Completeness, functionality and quality have not been verified. Auction-ID: A1-50992-5

NILFISK Autobrush 6411131, a car cleaning brush accessory for pressure washers. New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-43

Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-50798-176

Used hydraulic press. Condition: Used, in working condition Auction-ID: A7-50988-149

Used hinge boring and insertion machine (Gannomat 100 Duo-Press). Technical specifications: 1.1 kW / 380V, 6 bar. Full technical check performed by our specialized workshop. The machine has been used very little. Auction-ID: A7-50988-13

Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-50798-136

ALTO NILFISK garden cleaning brush 106411325, an accessory for pressure washers. Compatible with the following Nilfisk models: P 160.2-15 X-tra, P 150.2-10, P 150.2-10 X-tra, E 140.2-9 S X-tra, E 130.2-9 X-tra, C 130.1-6 X-tra, C 120.3-6 and C 110.3-5 X-tra. New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-41

Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-50798-249

NILFISK ALTO vehicle spray lance accessory (ref. 6410763) for pressure washers. Compatible with: C 105, C 110, C 120, C 125, C 130, C-PG 130, C-PG 140, D 130, D 140, D-PG 130, D-PG 140, E 130, E 140, E 145, E 150, P 150, P 160. New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-51

Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-50798-224

Top and bottom beams adjustable Auction-ID: A1-50476-133

Rated force: 125t, stroke adjustment: 20-140mm, ram adjustment: 80mm, stroke rate: 50/min, motor power: 10HP, drive: mechanical eccentric drive, machine is fully functional, maintenance, repairs and safety inspections have been carried out regularly, inspection logbooks and inspection reports are available for the period 2010-2025, extensive maintenance and repair work has been carried out in recent years, including work on the connecting rod and connecting rod bearing, eccentric bushing, bearing points, gear coupling, brake and clutch shoes, bearings, bushings, lubrication system, lubrication pump, parallel keys and other components. On-site inspection is possible.

Hydraulic single-column press with 25 t pressing force and 4 kW drive power. Machines are generally offered without documentation. If documents are available, they will be attached to the respective machine.

Working width: 3000 mm Working height: 2000 mm Number of cylinders: 5 St. S&S Frame Press, Type RP 3000 ------------------------------------- Working width: 3000 mm Working height: 2000 mm Item 1 00000431 S&S FRAME PRESS Type RP 3000 Item 2 00000371 Centre pressure beam with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2000 mm high Item 3 00000039 Shut-off valve on the 1st vertical cylinder Item 4 00000039 Shut-off valve on the 3rd vertical cylinder Item 5 00000039 Shut-off valve on the upper horizontal cylinder Item 6 00000039 Shut-off valve on the lower horizontal cylinder Manufacturer’s technical description: Sturdy welded frame construction made from thick-walled special hollow sections, sliding carriages and pressure beams with 50 mm hole spacing. Continuous abutment on the left-hand side for width compression, lower abutment on two  ...

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 62500 € : 1181.25 € : 63 to : 750 mm : 500 mm : 170 mm : 4 - 102 mm : 54 1/min : 490x325 mm : 90 mm : 270 mm : 440 mm : 7.5 kW : 1800 mm : 1150 mm : 2750 mm : 4100 kg 8-fold ram guide front protection by light guard manual stroke adjustment ram adjustment witch ratchet drive over gear combined clutch brake unit with pneumatic control fix table single and continuous stroke foot pedal and 2 hand control mech. overload safety device automatic central lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 70300 € : 1328.67 € : 110 to : 900 mm : 540 mm : 180 mm : 14 - 114 mm : 60 1/min : 490x325 mm : 90 mm : 280 mm : 7.5 kW : 1870 mm : 1320 mm : 2800 mm : 5600 kg 8-fold ram guide front protection by light guard manual ram adjustment mech. overload safety device automatic lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 79900 € : 1510.11 € : 130 to : 1000 mm : 640 mm : 210 mm : 5 - 110 mm : 60 1/min : 630x400 mm : 90 mm : 330 mm : 11 kW : 2200 mm : 1372 mm : 3000 mm : 8200 kg 8-fold ram guide front protection by light guard manual ram adjustment mech. overload safety device automatic lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 97800 € : 1848.42 € : 160 to : 1100 mm : 700 mm : 210 mm : 23 - 110 mm : 60 1/min : 630x400 mm : 8 : 95 mm : 65 mm : 325 mm : 480 mm : 2400 mm : 1430 mm : 3200 mm : 9950 kg 8-fold ram guide light guard mot. ram adjustment hyd. overload safety device automatic lubrication according to CE rules user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.