hot press used for sale

CONTROLS   PC controller BECKHOFF PRESS DESIGN   drive system: knuckle-joint SLIDE   total force (nominal): 250 to   stroke: 61 mm   stroke rate (max.): 60 /min COUNTER RAM   nominal force: 75 to   stroke: 15 mm V-RING   nominal force: 75 to   stroke: 13 mm TOOL DIMENSIONS   lower table (left-right): 540 mm   lower table (front-back): 540 mm   upper table (left-right): 540 mm   upper table (front-back): 540 mm   shut height max.: 320 mm   ram adjustment: 145 mm   distance between columns (H-frame): 560 mm   passline opening (free passage in side columns): 270 mm STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 250 mm   sheet thickness max.: 10 mm   feeding step max.: 999.99 mm   sheet length min: 1900 mm   pilot release system: yes   band lubrication system: yes Complete refurbished fineblanking press: disassembly into indivi ...

Pressure gauge GAUGE PLANT BEIERFELD 1/BS20/2 0 - 100 MPa (0 - 1000 bar) TGL16374 Accuracy class: 1 Housing diameter: Ø 160 mm Connection thread: M20 x 1,1,00 5 New !' Dimensions: 200 x 160 x 55 mm

General Manufacturer: Transmatic Type: TS-3M Year of Make: 2007 Plate size: 38 x 38 cm Maximum pressure: 600 g/cm2 Temperature setting: 50 – 305°C Condition Condition: Used Functional: Tested and fully functional

Pressure gauge GAUGE PLANT BEIERFELD 1/FM20/2 0 - 60 MPa (0 - 60 bar) TGL16374 Accuracy class: 0.6 Housing diameter: Ø 160 mm Connection thread: M20 x 1.5 New !' Dimensions: 200 x 160 x 55 mm

Manufacturer: Wemhöner, Year: 1994, Type: Membranepresse, Number of tables: 2, Automatisches Rüsten: no, Pin-Sytem: no, Heating system: Thermoöl, Max.Teilegrösse mm: 3.200 x 1.300, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 3.200, Min.-max. workpiece height in mm: 10 - 50, Membrane: yes, Durchmesser Presskolben: ca 180, Placing table: 2, Membrane: yes, Pressing cylinder: 5, Landing opening mm: 220, Automatische Entleerung: yes, Folienschneidmaschine Hersteller: yes, Folienkalander: 16 Rollen, Foil cutter: 2, Year :1994

Manufacturer: Simmpianti, Year: 1998, Longitudinal through running press: yes, Stages: 1, Work piece width min-max mm: 2700 mm X 3200 mm, Min.-max. workpiece height in mm: 3-80, Press length mm: 3200, Pressing width mm: 2700, Press power kg /cm²: 4-6, Warmwasser beheizt: yes, Feeding: yes, Automatical glue supply: yes, Veneer applicaition table: yes, Through running machine: yes, Destacking: yes, Year :1998

Pressure gauge set ELEKTRON KARDZHALI, PRESSURE GAUGE FACTORY VARNA 0 - 0.6 kp/cm² (0 - 0.6 bar) Accuracy class: 1.6 Housing diameter: Ø 100 mm Connection thread: M20 x 1.5 Pressure gauge set (2 pieces) ! Image similar, New ! Dimensions(Single Pressure Gauge): 138 x 100 x 48mm Dimensions(Packing): 140 x 105 x 105 mm

Pressure gauge set ELEKTRON KARDZHALI, PRESSURE GAUGE FACTORY VARNA 0 - 25 kp/cm² (0 - 25 bar) Accuracy class: 1.6 Housing diameter: Ø 100 mm Connection thread: M20 x 1.5 Pressure gauge set (2 pieces) ! Image similar, New !' Dimensions(Single Pressure Gauge): 138 x 100 x 48 mm Dimensions(Packing): 140 x 105 x 105 mm

Manufacturer: Hess , Type: Centro, Year: 2000, Hydraulical/pneumatical: yes, High / low pressure: yes, Press length mm: 3050, Press height in mm: 2200, Press depth mm: 100, Cylinder vertical: 2, Cylinder horizontally: 2, Vertikaldruckzylinder: 2, Haltezylinder zum Fixieren der Hölzer: yes, Mitteldruckbalken: no, Querdruckeinrichtung: yes, Funk-Handpanel: Handpanell, Elektronische Einzeldruckregelung (zum Verpressen von Kreuzsprossenfenster): yes, Year :2000

Pressure gauge set ELEKTRON KARDZHALI, PRESSURE GAUGE FACTORY VARNA 0 - 40 kp/cm² (0 - 40 bar) Accuracy class: 1.6 Housing diameter: Ø 100 mm Connection thread: M20 x 1.5 Pressure gauge set (2 pieces) ! Image similar, New ! Dimensions(Single Pressure Gauge): 138 x 100 x 48mm Dimensions(Packing): 140 x 105 x 105 mm

Manufacturer: Bürkle , Type: S80 2200x1250, Year: 1985, Stages: 3, Lateral press: yes, Dimensions of heating plate approx. mm: 2200 X 1200, Number of storeys: 3, Cylinder stroke: ca.500, Charging side: quer, Landing opening mm: ca.150, Steel heating plates: yes, Heated by: Warmwasser, Rückzylinder N/cm2: ca. 4, Number of pressing cylinders: 4, Longitudinal through running press: 2200, Time switch: 1200, Year :1985

Pressure gauge set ELEKTRON KARDZHALI, PRESSURE GAUGE FACTORY VARNA 0 - 1.6 kp/cm² (0 - 1.6 bar) Accuracy class: 1.6 Housing diameter: Ø 100 mm Connection thread: M20 x 1.5 Pressure gauge set (2 pieces) ! Image similar, New !' Dimensions(Single Pressure Gauge): 138 x 100 x 48mm Dimensions(Packing): 140 x 105 x 105 mm

Pressure gauge set ELEKTRON KARDZHALI, PRESSURE GAUGE FACTORY VARNA 0 - 1.0 kp/cm² (0 - 1.0 bar) Accuracy class: 1.6 Housing diameter: Ø 100 mm Connection thread: M20 x 1.5 Pressure gauge set (2 pieces) ! Image similar, New !' Dimensions(Single Pressure Gauge): 138 x 100 x 48 mm Dimensions(Packing): 140 x 105 x 105 mm

Manufacturer: Wemhöner Membranenpresse, Year: 1996, Type: KT-VP 28, Number of tables: 1, Automatisches Rüsten: no, Pin-Sytem: no, Heating system: Elektro, Nutzfläche : 2500 X 1300, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10--60, Working widht max mm: 1300, Press length mm: 2500, Pressing width mm: 1350, Kw Heizleistung obere Heizplatte: yes, Max. temperature °C: 220, Foil magazin spaces: 8, Veneer/ foil thickness max mm: möglich, Through running machine: yes, Folienpaternoster: yes, Through running machine: yes, Year :1996

Contact pressure gauge, pressure gauge with switching contacts MESSGERÄTEWERK BEIERFELD 1/BM20/2 0 - 4 kp/cm² (0 - 4 bar) ) Switch Type: 2/Z102-1 Switching Capacity: 220V AC/DC 30W(VA) Housing Diameter: Ø 160mm Accuracy Class: 2,2,000V AC/DC 5 flange diameter: Ø 160 mm with protective membrane ! New ! Dimensions: 220 x 210 mm

Contact pressure gauge, pressure gauge with switching contacts MESSGERÄTEWERK BEIERFELD 1/BM20/2 0 - 16 kp/cm² (0 - 16 bar) Switch Type: 2/Z112-1 Switching Capacity: 220 V AC / DC 30 W (VA) Housing Diameter: Ø 160 mm Accuracy Class: 1 Connection Thread: M20 x 1.5 New ! Dimensions: 210 x 205 x 150 mm

Test manometer with test valve MESSGERÄTEWERK BEIERFELD 1/FM20/2 0 - 1,0 - 1,0 6 kp/cm² (0 - 1.6 bar) TGL16374 accuracy class: 0.6 housing diameter: Ø 160 mm test valve with test connection M20 x 1.5 TGL16401 in wooden case New !' Dimensions: 330 x 195 x 145 mm

Manufacturer: Friz, Year: 1996, Type: MFP 12 Masterform, Number of tables: 1, Heating system: elektrisch, Nutzfläche : 1.100 x 2.400, Press length mm: 1.400, Pressing width mm: 2.700, Work piece thickness max mm: 300, Membrane: yes, Kw Heizleistung obere Heizplatte: oben 24 + unten 11, Membrane: yes, Size of heating plate mm: 1.400 x 2.700, Pressing cylinder: 6, Landing opening mm: 315, Overall pressing pressure kN: 320 bar, Weight approx. kg: 20.000, Year :1996

Test manometer with test valve MEASURING INSTRUMENT PLANT BEIERFELD 1/FM20/2 0 - 2,0 - 2,0 5 kp/cm² (0 - 2.5 bar) TGL16374 accuracy class: 0.6 housing diameter: Ø 160 mm test valve with test connection M20 x 1.5 TGL16401 in wooden case New !' Dimensions: 330 x 195 x 145 mm

Pressure gauge MEASURING INSTRUMENT PLANT BEIERFELD 1/FM20/2 0 - 16 kp/cm² (0 - 16 bar) TGL16374 Accuracy class: 0,6 Housing diameter: Ø 160 mm Connection thread: M20 x 1.5 New ! Dimensions: 200 x 160 x 55 mm

Manufacturer: Bermantingen, Type: DIXI 30 S, Hydraulical/pneumatical: Hydraulisch, Presskraft max.kN : 300, Zykluszeit Sekunden: 29, Presszeit Sekunden: 14, Höhe vom Boden cm: 94, Geteilte Einfüllöffnung B x H cm: 107 X 26, Höhe vom Boden cm: 94, Breite cm: 160, Höhe cm: 317, Ballen ausgeworfen B x H x T: 120 x 80 x 80 x 110, Ballengewicht Kg: 270-360, Weight approx. kg: 2180,

Contact pressure gauge, pressure gauge with switching contacts MANOMETERWERK WITTGENSDORF 0 - 600 kPa (0 - 6 bar) Switch type: 2/Z112-1 Switching capacity: 220 V AC / DC 30 W (VA) Housing diameter: Ø 160 mm Accuracy class: 1 Connection thread: M20 x 1,1,01 5 New !' Dimensions: 210 x 205 x 150 mm

1:1 Pressure Converter, Pressure Converter VDO MESS- UND REGELTECNIK GmbH Type: 21 / 16 Best: No. 055834 Supply air pressure: 1.4 - 4.4 bar to Measured value: 4 mbar - 4.0 bar with accessories New ! Dimensions: 78 x 78 x 45 mm

Manufacturer: Comil, Type: Astro 700, Year: ca.1990, Hochschränke und Hänger: 680, Work piece width min-max mm: 300 - 2500, Min.-max. workpiece length in mm: 300 - 1300, Min.-max. workpiece height in mm: 800, Working width min min mm: yes, Hydraulical/pneumatical: yes, Min.-max. pressing length in mm: 1300, Cylinder horizontally: no, Pre-assembling conveyor: 22,5, Feeding speed continous adjustable: jyes, Discharge belt roller conveyor height: 7, Machine rigging: 2860, Press power kg /cm²: 7500, Year :ca.1990

Manufacturer: Italpresse, Year: 2000, Type: Lock Form SS AIR , Control: 1330, Number of tables: 2680, Automatisches Rüsten: 55, Work piece width min-max mm: elektrisch, Min.-max. workpiece height in mm: 150, Press length mm: 2, Membrane: 1450 x 2800, Foil magazin spaces: no, Foil types: yes, Brushing machine: yes, Year :2000

Contact pressure gauge, pressure gauge with switching contact WIKA 212.20.100 Cont. 821.111 0 to 250 bar Ø 100 mm with diaphragm seal (approx. 1500 mm cable) New! Dimensions: 120 x 60 x 55 mm

Manufacturer: Comil, Type: Astro 700, Year: 1990, Work piece width min-max mm: 680, Min.-max. workpiece length in mm: 300 - 2500, Min.-max. workpiece height in mm: 300 - 1300, Working widht max mm: 800, Hydraulical/pneumatical: yes, High / low pressure: yes, Min.-max. pressing height in mm: 1300, Pre-assembling conveyor: no, Feeding speed max m/min: 22,5, Glazing tape: jyes, Connected load in kW: 7, Machine height mm: 2860, Machine width mm: 7500, Year :1990

Manufacturer: Wemhöner, Year: 1997, Type: KTV 28/15 - 165, Work piece width min-max mm: 1500, Min.-max. workpiece length in mm: 2800, Min.-max. workpiece height in mm: 10-40, Max. temperature °C: 90 / 180, Placing table: yes, Through running machine: yes, Pressing cylinder: 6, Pin system: no, Landing opening mm: 1, Foil cutter: yes, Through running machine: yes, Year :1997

Manufacturer: Himmel Hochfrquenz Presse, Year: ca.1993, Work piece width min-max mm: 20-150, Min.-max. workpiece length in mm: egal, Min.-max. workpiece height in mm: 6-40, High / low pressure: yes, Vertikaldruckzylinder: yes, Horizontaldruckzylinder: yes, Haltezylinder zum Fixieren der Hölzer: yes, FREE TEXT: Hofrequenz für Rahmenteile, Year :ca.1993

Manufacturer: Italpresse, Year: 2002, Type: Lock Form SS AIR , Work piece width min-max mm: 1330, Min.-max. workpiece length in mm: 2680, Min.-max. workpiece height in mm: 55, Heating system: elektrisch, Max. temperature °C: 150, Placing table: yes, Size of heating plate mm: 1450 x 2800, Pressing cylinder: 2, Pin system: yes, Automatical glue supply: yes, Year :2002

Pressure transmitter REXROTH HM20-20/250 R901342027 Measuring range: 0 - 250 bar U(signal): 0.1 - 10 V DC U(supply): 18 - 36 V DC used, tested ! Dimensions: 130 x 22 x 20 mm

Manufacturer: Igomak, Type: T 450, Year: 1976, Hydraulical/pneumatical: Hydraulisch, Press depth mm: 500, Press length mm: 1000, Press press opening max mm: 450, Number of cylinders: 3 Zylinder 180 mm Durchmesser, FREE TEXT: Heizplatte oben/ 7,5 Kw Leistung, Year :1976

Manufacturer: Dimter , Type: Profipress 3500, Year: 2003, Continuous flow system: yes, Work piece width min-max mm: 300 - 3500, Min.-max. workpiece length in mm: 1300, Min.-max. workpiece height in mm: 11 - 60, Hydraulical/pneumatical: yes, High-frequency: yes, Warm water: yes, Thermoöl: yes, High / low pressure: yes, Cylinder vertical: yes, Cylinder horizontally: yes, Pre-assembling conveyor: yes, Glue application machine: yes, Clamping: yes, Disc saw transverse: yes, FREE TEXT: 2800 Betriebsstunden, Year :2003

Pressure transmitter HYDROTECHNIK HT-PD 3403-53-NO.54 Measuring range: 0 - 210 bar U(signal): 0.1 - 10 V DC U(supply): 12 - 32 V DC used, tested ! Dimensions: 100 x 40 x 22 mm

Manufacturer: Limatech, Type: MPS 20, Year: 1998, Work piece width min-max mm: 800, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 1300, Feeding speed max m/min: ca. 30, Feeding speed continous adjustable: yes, Machine rigging: automatisch, Compressed air bar: 6, Wight approx. kg: 3000, Year :1998

Manufacturer: Hess, Type: Speedy Quick Step, Year: 1995, Min.-max. workpiece length in mm: 3500, Min.-max. workpiece height in mm: 2500, Working widht max mm: 600, Hydraulical/pneumatical: hydraulisch, High / low pressure: Hochdruck, Cylinder vertical: 3, Cylinder horizontally: 2, FREE TEXT: Automatisches Verfahren der Balken und Lanhhubzylinder für vertikale Bewegung, Year :1995

Pressure Transmitter, Piezoresistive Pressure Transmitter PMA P21R/120 51863 0413.0250 Measuring range: 0 - 120 bar I(signal): 4 - 20 mA DC U(supply): 8 - 28 V DC used, tested ! Dimensions: 100 x 40 x 22 mm

Manufacturer: Igomak, Year: ca. 1970, Press depth mm: 500, Press length mm: 1000, Press press opening max mm: 450, Number of cylinders: 3 Stück/Durchmesser 100 ca, FREE TEXT: Heizplatte Oben/Veröängerte Tisch jede Seite 1000 mm, Year :ca. 1970

Manufacturer: Bürkle, Year: 1997, Type: BTF 1426, Work piece width min-max mm: 1100, Min.-max. workpiece length in mm: 2350, Min.-max. workpiece height in mm: 6-35, Working widht max mm: 1180 X 2430, Heating system: Thermoöl, Heating power in kW: 25, Foil magazin spaces: 10, Placing table: 3, Through running machine: yes, Folienschneideeinrichtung: yes, Through running machine: yes, Year :1997

Pressure transmitter, level transmitter HENGESBACH KERAMESS G1/2B 30mbar4/2LF Measuring range: 0 - 100 bar < br /> Pmax: 4 bar I(signal): 4 - 20 mA DC U(supply): 13 - 36 V DC stainless steel ! used, tested ! Dimensions: 160 x 90 x 70 mm

pressure: 1 t Stroke: 315 mm table surface area: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure regulator manually adjustable, ultrapure gas regulator DRUVA type: LMD-500-01 inlet pressure: max. 50 bar outlet pressure: 0.5 - 6 bar stainless steel ! Dimensions: 125 x 115 x 50 mm

Used press in top condition Bj. 2011 New solid core plate with vacuum holes Press width 1700 mm Press length 3700 mm

Pressure regulator hand-adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-3262-242H283 inlet pressure: max. 35 bar outlet pressure: 0 - 35 bar stainless steel ! Dimensions: 135 x 135 x 70 mm

Pressure regulator manually adjustable, ultrapure gas regulator DRÄGER TESCOM type: 44-2260-242-010 inlet pressure: max. 27 bar outlet pressure: 0 - 1.7 bar stainless steel ! Dimensions: 120 x 120 x 90 mm

High-pressure pump for baler HSM 500.1 VL with 7.5 kW motor

Pressure reducer, pressure regulating valve MANKENBERG 652 G1 6570036TA-EM Temp.: 130°C 2 to 5 bar PN 40/10 stainless steel !' New !' Dimensions: 310 x 145 x 115 mm

Pressure relief valve, relief valve LESER TUEV-SV 95-425 5394.2302 D0 10 D/G 0.36 F 0.26 10 bar G1/2 Material: stainless steel 1.4408 New ! Dimensions: 182 x 72 x 55 mm

- With 20 plates - With 20 canvases - Machine in perfect condition Dimensions : - Length: 2000 mm - Width: 700 mm - Height: 1500 mm