hot plate line used for sale

Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 2005 mm -Length: 2000 mm -Height: 210 mm -Plate thickness: 120 mm -Plate: with support ribs -Groove width: 28 mm -Dimensions: 2000/2005/H210 mm -Weight: 2700 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, alignment plate -Width: 2245 mm -Length: 2500 mm -Height: 780 mm -Plate thickness: 25 mm -with: supporting ribs -Weight: 2720 kg

T-slot plate, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 1500/3510/H950 mm -Plate thickness: 20 mm -Plate is: with supporting ribs -1x T slot: 18 mm -with: detachable stop -Weight: 2600 kg

Technical data approx.: - Max. working width 1020 mm - Max. material thickness at 40 kg/mm², strength 1.5 mm -one. Adjustable back gauge up to 550 mm - Front angle stop - Sheet metal hold-down device - Table size 1100 x 650 mm - Working height 900 mm - Space requirement approx. W 1800 x H 1450 x D 850 mm - Weight approx. 400 kg -mobile

T-slot plate, measuring plate, measuring table, clamping plate with T slots, plate field, welding table, welding table -Dimensions: 620/1560/H260 mm -Plate thickness: 20 mm -Plate is: with supporting ribs -1x T-slot: 15 mm -Weight: 360 kg

T-slot plate, measuring plate, measuring table, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 250/1450/H170 mm -Sheet thickness: 28 mm -Plate is: with supporting ribs -1x T-slot: 12 mm -1x: Longitudinal groove -Weight: 156 kg

Koening KTW 653 Printing Plate Developing Machine; Condition as good as new; 3 brushes; Inlet width 650mm; suitable for waterless plates; optionally with pressure plate stacker. Plate processor Koenings KTW 653; condition like new; 3 brushes; working width 650mm; used for waterless plates; for option with plate stacker.

Clamping plate with T-slots Plate field Welding table Welding table Plate boring machine -Width: 795 mm -Length: 2800 mm -Height: mm -Plate thickness: 35 mm -Working height: 960 mm -Plate with: support ribs -Groove width: 22 mm -Dimensions: 860/2870/H960 mm -Weight: 1470 kg

Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 9090 mm -Table height: 206 mm -Working height: 350 mm -Transport dimensions: 9090/490/H350 mm -Weight: 2300 kg

Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 610 mm -Length: 2900 mm -Height: 55 mm -Working height: 185 mm -Plate: with support ribs -Groove width: 18 mm -Dimensions: 2900/610/H185 mm -Weight: 874 kg

Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 494 mm -Length of the clamping surface: 2925 mm -Height of table surface: 447 mm -Working height: 447 mm -Transport dimensions: 2925/494/H447 mm -Weight: 564 kg

Antistatic industrial flooring, grey mottled used, good condition Click plates Thickness: approx. 10.4 mm Different sizes available: ca. 410 pcs. Abm. approx. 600 x 600 mm approx. 129 pcs. Abm. approx. 600 x 300 mm ca. 90 pcs. Abm. approx. 1,000 x 600 mm ca. 40 pcs. Abm. approx. 1,200 x 600 mm ca. 3 pcs. Abm. approx. 600 x 530 mm Price: on request Location: Bochum Intermediate trade reserved

Clamping plate, unit carrier, milled surface, welding table, welding table -Clamping surface width: 460 mm -Length of clamping surface: 7550 mm -Height of table top: 196 mm -Working height: 196 mm -Transport dimensions: 7550/490/H196 mm -Weight: 1726 kg

Clamping plate, unit carrier, milled surface, welding table, welding table -Width of the table surface: 498 mm -Length of the clamping surface: 2525 mm -Height of table surface: 268 mm -Working height: 268 mm -Transport dimensions: 2525/500/H268 mm -Weight: 570 kg

Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 1320 mm -Length: 3530 mm -Height: 830 mm -Plate thickness: 75 mm -Plate: with support ribs -Groove width: 23 mm -Weight: approx. 3500 kg

T-slot plate, clamping plate with T-slots, plate field, welding table, welding table, intermediate plate for hydraulic press, eccentric press, milling machine -Dimensions: 930/700/H90 mm -Plate: massive -Bore in the middle: Ø 100 mm -Weight: 450 kg

T-slot plate, clamping plate with T slots, plate field, welding table, welding table -Intermediate plate for: hydraulic press, eccentric press, milling machine -Dimensions: 1100/650/H100 mm -Plate: solid -Bore: 8x -T-slot: 28 mm -Weight: 536 kg

Face plate, face plate chuck, four-jaw chuck -Chuck size: Ø 195 mm -with: T slot 10 mm -Thread intake pitch: 3 mm -Weight: 5.7 kg

Clamping plate with T slots, plate field, welding table, welding table -Clamping surface width: 250 mm -Clamping surface length: 250 mm -Height: 40 mm -Plate thickness: 60 mm -Hole spacing: 290 mm -Groove width: mm -Dimensions: 330/260/H40 mm -Weight: 11.6 kg

Key data: 8000 mm, 3000 mm

Large plate field with T-slots Clamping area 8,000 x 3,000 mm Thickness 350 mm. With 12 x T-slots. Total weight approx. 20 t

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck, three-jaw chuck with clamping plate -Manufacturer: Röhm, three-jaw chuck with clamping plate -Mouth size: Ø 250 mm -Passage: Ø 76 mm -Mounting plate: 500 x 310 mm -Overall dimensions: 500/310/H300 mm -Weight: 72 kg

Mounting plate, scribing plate, measuring plate, measuring table, welding table, welding table, straightening plate, scribing plate -Mounting plate: Straightening plate with base frame -Length: 600 mm -Width: 600 mm -Table thickness: 65 mm -Overall dimensions: 600/600/H815 mm -Weight: 181 kg

Clamping plate, plate field, grooved plate -Clamping plate: grooved plate -Length: 310mm -Width: 310mm -Plate height: 65 mm -Weight: 44 kg

Plate bender, machine number 3986/47, year of manufacture 1998, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Mounting plate, plate field, aluminum plate -Mounting plate: made of aluminum, with threaded holes -Sheet thickness: 25 mm -Threaded holes: M12, spacing 100 mm -Dimensions: see photo technical drawing -Overall dimensions: 1290/800/H120 mm -Weight: 65 kg

Mounting plate, mounting module -Manufacturer: murrelektronik, 2 pieces MP 6 mounting plate with 2 resistors -Art.No: 62001 -Price/tax: complete -Dimensions: 65/45/H35 mm -Weight: 0.1 kg/pc.

Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate -Magnetic plate: clamping surface 800 x 250 mm -Voltage: 110V 1.7A -Transport box: included -Quantity: 1 piece available -Dimensions box: 1160/480/H250 mm -Weight: 112kg

Max. size= 120 x 95 cm, Availability= 032024, Clean-Out unit for process-free thermal printing plates online model including transport bridge 95 cm input width LOT Loaded in truck or container

mobile, with lockable castors Table size 2000 x 1550 mm swivel horizontal-vertical Extension to height-adjustable possible on request

Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: with support ribs -Length: 1000 mm -Width: 1000 mm -Sheet thickness: 30 mm -Dimensions: 1000/1000/H260 mm -Weight: 402 kg

Fotodirekte Offset-Druckplattenkamera - Plate Exposer Heidelberg QUICKPLATER 40 Foliendicke / Foil thickness 0,1 - 0,2 mm Folienstanzfunktion (nur Langformat) / Foil Punch System (only lengthways format): Heidelberg Quickmaster 46, d. h. zwei U-förmige Löcher mit einem Abstand von 220 mm symmetrisch zur Mitte der Folienvorderkante Folienformate / Foil Size: Querformat / landscape format max. 404 x 510mm Langformat / Long Size: max. 350 x 510mm Querformat / landscape format min. 222 x 250mm Vorlagenformat / Template format max. Bei Verkleinerung auf / when reduced to 70,7 %: 440 x 614mm Bei Verkleinerung auf / when reduced to 64 %: 448 x 575mm Motivformat auf der Folie / Motiv format on Foil max.: 1:1 Querformat / landscape format: 350 x 505mm 1:1, gestanztes Langformat / punchd long size: 350 x 480mm 1:1, ungestanztes Langformat / not punch long size: 350 x 469mm 70,7 %, Lang/Querforma ...

Fixators, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, screw jack -Height adjustable: 320-390mm -Number: 24x Fixators available -Price: piece -Dimensions: Ø 360/H370 mm -Weight: 41kg/pcs

clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Surface: with grooves, without T-slots -Length: 3000 mm -Width: 2500 mm -Height: 300 mm -Transport dimensions: 3000/2500/H300 mm -Weight: 5220 kg

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Manufacturer: Rübenach, clamping plate: with support ribs on a solid base -Length: 2500mm -Width: 1500mm -Height: 835mm -Dimension: 2500/1500/H835 mm -Weight: 2440 kg

Key data: 600 mm, 400 mm, 90 mm

Electro-Permanent Magnet Clamping Plate Type 1150V-40/60-14

Base plate, site fence base, barrier base -Manufacturer: Schake TL plastic footplate, 3 pieces -Type: K1 - Pockets/Dimensions: see photos -Price/delivery: complete -Transport dimension: 880/440/H360 mm -Total weight 87 kg

T-slot plate, clamping plate with dovetail slots, plate field, welding table, welding table -Intermediate plate: for hydraulic press eccentric press -Opening: 150 x 100 mm -Groove width: 18 mm -Hole spacing: 200 x 250 mm, Ø 14 mm -Dimensions: 480/350/H60 mm -Weight: 66 kg

Clamping plate, welding table, welding table, straightening plate -Clamping plate: solid design, with large vice -Clamping area: 1050 x 1040 mm -Table height: 715 mm -Plate thickness: 180 mm -Total dimensions: 1380/1060/H950 mm -Weight: 1550 kg

Clamping plate, welding table, welding table, straightening plate -Clamping plate: solid design -Clamping area: 1550 x 1000 mm -Table height: 730 mm -Plate thickness: 130 mm -Transport dimensions.: 1550/1000/H730 mm -Weight: 1550kg

Clamping plate, welding table, welding table, straightening plate -Clamping plate: Directional plate with base frame, solid design -Clamping surface: 960 x 955 mm -Table height: 730 mm -Transport dimensions: 960/955/H745 mm -Weight: 631 kg

Clamping plate, marking plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate -Clamping plate: straightening plate with base frame -Length: 450mm -Width: 450mm -Table thickness: 29 mm -Total dimensions: 855/450/H1135 mm -Weight: 59 kg

Mounting plate, mounting module -Manufacturer: murrelektronik, mounting plate type MP 6 S with components -Art.No: 62030 -Dimensions: 90/60/H45 mm -Weight: 0.1 kg

Heizplatte / Heating Plate Busse HPT 900W Serial-No. 98 822 Heiztemperatur einstellbar / Heating temperature adjustable Arbeitsfläche / Working area max. 350 x 650mm 5 Trockenklammern / 5 Drying clamps Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Face plate: chuck size Ø 500 mm -Receptacle: short cone 8 (Ø 136-139 mm) -Hole circle: Ø 172 mm -Through hole: Ø 80 mm -Groove width: 20 mm -Weight: 86 kg

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: with support ribs -Length: 510mm -Width: 310mm -Height: 65mm -Plate thickness: 27 mm -Weight: 37.7 kg

Clamping plate, marking plate, measuring plate, measuring table, welding table, welding table, straightening plate -Clamping plate: clamping area: 850 x 400 mm -Holes: Ø 20 mm -Threaded holes: M8 -Dimensions: 850/400/H17 mm -Weight: 41kg

Druckplatten - Entwicklungsmaschine / Plate Processor AZ FE Year 1999 - Serial-No. XX158 Working width max. 300mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

faceplate diameter: 400 / 450 mm bore: 100 / 120 mm faceplate - height: 120/165 mm short taper: Din 55022 7 Gr. 11 Four-jaw face plate. Short taper - design, according to DIN 55022/27, size 11, with 6 studs, reversible top jaws, Baking individually via threaded spindles only individually adjustable. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: with support ribs -Length: 4480mm -Width: 2490mm -Height: 280mm -Plate thickness: 15 mm -Plate: with support ribs -Transport dimensions: 4530/2530/H280 mm -Weight: 4400 kg

The very well-preserved plate apparatus from the manufacturer Schmidt-Bretten GmbH, which can be seen in the pictures, is being sold. The plate cooler is completely stainless steel. Specifications: Manufacturer: W. Schmidt-Bretten GmbH Year: 1994 For more technical data, see nameplate. Milk pipe connections see pictures.