hot plate line used for sale

technical details: - Thermal press for printing textiles (T-shirt, caps, towels, carrier bags, etc.) - Contact surface: 38 x 38 cm - Power: 1,750 W - Voltage: 230 V - Current: 7.5 A - Frequency: 50/60 Hz Shipping is of course possible. Shipping is plus freight and packaging costs, depending on size and weight. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Hotmelt glue applicator conveyer for gluing of currogated boxes Make Nordson Model Conveyer Year 1998 ? Glue appliance width 120 cm (240 cm) Glue melter Nordson Vista Glue computer Nordson Eclipse EPC15 Number of heads 4 heads (Meier) Application to apply up to 4 lines of glue onto a substrate on the belt. commonly a corrugated box Available direct

ERSA HOTFLOW 2/20 reflow oven was built in 2007 in Germany by ERSA GmbH. It is a specialist machine dedicated to reflow soldering, one of the basic soldering techniques in high-volume production of electronic components. Electronic components are joined to the printed circuit board PCB by means of solder paste, which is melted at a controlled temperature. This results in extremely durable and precise connections, which is crucial in the production of modern electronic devices. ERSA HOTFLOW 2/20 sets the highest standards in lead free reflow soldering. It allows the soldering of all, even the most thermally sensitive components on printed circuit boards PCB with a maximum width of 510 mm. The workspace consists of 20 separately controlled heating zones and 3 cooling zones with precise temperature control, which provide maximum flexibility in terms of soldering profile configuration. Th ...

With Steuer Hot Foil Stamping System, Fully Automatic, Speed Control, Central Lubrication

Manufacturer: MONTI ANTONIO Laminating-Coating Model: hot melt mod. 908 Type: Fleece and Foam LAMINATION & Coating with COATEM Foam make to inject direct to fabric for Coating. Working widh: 1800 mm Manufacture Date: 2003 (like new with new spare cylinder -hotmelt spareparts) With new spareparts Complete Modernisation in year 2016 with new electricity and software. description: working with SL1 Pleva weftstraitner go to 2 line Lamination Foam or fleece to Fabric

Heidelberg OHT A4 size Original Heidelberg Hotfoilsystem

Fully automatic hot stamping press Oropress Mechanical eccentric press with lift table Lift table as pneumatic sliding table 250 x 250 mm Fully automatic sequence, optionally triggered with foot switch for single stroke Heated press punch 120 x 200 mm up to 250 °C Safety grille Film Feed Unit Built in 1986

Stamping pressure : 40 kN Stamping area : 150 x 210 mm Stamping die holding plate : with dove-tail guiding Stroke of plunger : 28 mm Daylight (adjustment of height) : 0-180 mm Throat (middle of stamping plate to bow) : 190 mm Foil feeding system : motor-driven, 1-fold running from the left to the right side with foil re-winding device Working table : sliding automatically in and out with table lock pneumatic, 400 mm x 450 mm PLC : Siemens S 7-1500 with TP 700 color Safety device : in CE-execution with safety light curtains in front Color of the machine : light grey RAL 7035 Voltage: 3 x 400 VAC (L1/L2/L3/N/PE), 50 Hz. Pneumatic access : oil and water free compressed air, 6bar

Precision Surface and Profile Grinding Machine FS1570 SL Grinding area: 1500 x 700 x 650 mm Grinding spindle motor: 18 KW Table drive: hydraulic Transverse drive: electromechanical Paintwork: RAL 6011 – reseda green Equipment: •Central lubrication • Wet grinding device • Fine adjustment knob on the transverse path handwheel • Dressing Diamond • Electro magnetic clamping plate 1500 x 750 mm • Magnetic plate adhesive force control Accessories: • Vertical automatic type SL with "LCD" flat screen and membrane keypad • Electric Straight Dresser • Stepless change of speed • Universal paper filter machine • Machine light • Column elevation by 200 mm • Precision balancing scale • 2 new grinding wheels Machine has been overhauled in 08/2018 "Invoice is available" Here's what was done: •Timing belt •Storage • Ball screw •  ...

Specifications Center width mm 1000 Tip height mm 300 Grinding length mm 1000 Workpiece weight between tips kg 800 Load on the workpiece spindle during on-the-fly grinding Nm 200 X-axis - infeed movement Feed speed mm/min 0.01-8000 Linear measuring system, internal resolution mm 0.0001 Z-Axis - Table Movement Table speed mm/min 0.01-8000 C-axis - workpiece headstock Speed min-1 0-300 Drive power kW 5 Pick-up taper MK 5 / KK 6 Grinding spindles Power grinding spindle motor with water cooling kW 15 Grinding wheel circumferential speed m/s 35 (63) Grinding wheel, standard mm 600x80x203.2 Tailstock MK 5 pick-up taper Workpiece Tension Spring Hydraulic Retraction

Technical details Grinding length max. 600 mm Grinding width max. 350 mm Control conv. Distance from spindle center to table max. 525 mm Magnetic clamping plate 600 x 350 mm max. table load 400 kg Table longitudinal movement 660 mm Table speed 2 - 28 m/min Transverse movement 360 mm Grinding wheel dimensions max. 300 x 50 x 76.2 mm Clamping width max. 30 mm Drive power - grinding spindle 3.7 kW Total power requirement 8 kW Machine weight approx. 2.1 t Space requirements approx. 4.5 x 3.0 x 2.4 m

Siemens Sinumerik 840D control system, incl.: Abrasive preparation, hydraulic unit, and portal loading system for loading and unloading the machine, Technical specifications:, Center distance: 600mm, center height: 180mm, maximum grinding diameter: 355mm, maximum workpiece weight: 150kg, maximum Z-axis speed: 11 m/min, minimum Z-axis speed: 0.01 m/min, maximum X-axis speed: 7.5 m/min, minimum X-axis speed: 0.01 m/min, External cylindrical grinding spindle:, Grinding wheel standard (Øa x w x Øi): 600 x 80 x 304.8 mm, Grinding wheel peripheral speed: 5 - 50 m/s, Power consumption of grinding spindle motor: 11 kW, Workpiece spindle:, Taper bore workpiece headstock: MK 5, Power consumption: 2.7 kW, Tailstock:, Taper bore punch point: MK 4, Coolant tank: 2000 liters, lubricating oil: 30 liters, hydraulic oil: 60 liters, Operating voltage: 400 volts, 3 phases, Mains frequency: 50 Hz, Total w ...

grinding diameter: 355 mm grinding length: 600 mm weight of the machine ca.: 7,5 t centre height: mm total power requirement: kW dimensions of the machine ca.: m Sinumerik 840D sl cnc control tail stock measuring device diamant roll portal loading device Technische Daten / technical details: schleifbarer Durchmesser / grinding diameter 355 mm Schleiflänge / grinding lenght 600 mm Schleifscheibenmaß / grinding wheel dimension 600x80x304 mm Reitstock / tail stock MK4 Antriebsleistung Schleifspindel / drive capacity grinding wheel 9 kW Gewicht der Maschine / weight 7500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3 boxes x hotmelt HM-180 (5kg bag) remainder Art.Nr. 995.18.02 (L985) 75€ for 3 cartons

Manufacturer: Cefla, Type: Hotmelt SP1-EVO, Year: 2015, 2 roller machine: yes, Min.-max. workpiece height in mm: 0-80, Working widht mm: 1300, Roller cooling system: Heizung, Feeding - kW: 0,75, Feeding speed max m/min: 5-20, Compressed air bar: 2-10, Year :2015

grinding length: 2000 mm grinding width: 600 mm workpiece height: mm Control: total power requirement: 17 kW weight of the machine ca.: 10 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Surface Grinding Machine Manufacturer: Geibel + Hotz Type: FS 40 AC Year of Make: 1998 Table length: 400 mm Table width: 200 mm Workpiece weight max. on the table: 150 kg Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Machine weight approx.: 1,050 kg Machine dimensions LxWxH: 1,800 x 1,200 x 2,250 mm

Ajax 1,000 Ton Straight Side Mechanical Forging Press S/N 4410 10” Stroke 33” Shut Height 36” x 36” Bed 80 Strokes Per Minute Partially Rebuilt Ajax 1,000 Ton Straight Side Mechanical Forging Press S/N 4621 10” Stroke 32” Shut Height 36” x 32” Bed 80 Strokes Per Minute Bolsters are included. Both presses are in working condition and under power.

Manufacturer: Brunotte & Niemeyer Year of Manufacture: 1968 Type of Machine : Hot cure tire press - Open/close system with hydraulic spindle - Plc cabinet - Press on it self can load tyres by own boards - Air max: 16bar pressure inside - Standard working pressure 8 bar - Hydraulic pump - Heating: Steam - Accessories: optional 24R20.5 XS mould Find more here - / Contact us at -

Pneumatic laboratory heating press REITZ PHP3 – used demonstration machine Pressed press 3 KN (0.3 tons) With heating device up to 250 °C and temperature control - Press force 3 KN (0.3 to) - Pneumatic cylinder make Festo - Pneumatic two-hand control - Press plate guided in 4 guide columns - Working surface between guide columns 200 220 mm - Heating and insulating plate 150 x 250 mm -Temperature - Machine table made of aluminum profiles and PA plate 60060060mm - Total weight approx. 100 kg - Mobile with 4 swivel castors, 2 of which with brakes . Suitable for foil pressing and embossing under heat.

grinding length: 1000 mm grinding width: 500 mm workpiece height: 425 mm Control: total power requirement: 15 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 800 mm grinding width: 500 mm workpiece height: 425 mm total power requirement: 15 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece weight: 160 kg workpiece length: 250 mm diameter: 620 mm total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m Auswuchtwaage für Schleifscheiben und scheibenförmige Prüfkörper Workspace: 620 x 250 Control: max. Prüfkörpergewicht 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 800 mm grinding width: 400 mm workpiece height: 375 mm Control: Siemens 840 D total power requirement: 18 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. size= 92 x 63 cm, Availability= 062025, Format 920x630mm capacity 750kg max.pile hight 1210mm LOT Loaded in truck or container

1,000 litre hot water tank/storage tank Characteristics volume 1000 L material V2A (AISI 304) 1.4301 Total height 2600 mm Cylinder height 1100 mm inner diameter 1000 mm Outside diameter 1120 mm Outside surface 2B=IIIC ground Surface inside 2B=IIIC ground Year of construction 2013 Design vertical Last use chemical industry Insulation 60 mm Operating temperature range 20-95°C Description MJ UNI-HIGH Topsoil: Flat floor with 3% slope crane eye Manhole DN 400 2 x connection CIP cleaning with line Connection Tank cylinder: Ladder hook Level measurement Underbody: Residual drain pipe with T-piece with 2 butterfly valves 3 fixed feet with domes

grinding length: 800 mm grinding width: 400 mm workpiece height: 375 mm table surface area: 840 x 400 mm table speeds: 0,005 - 35 m/min spindle speeds (infinitely variable): 1000 - 3000 U/min grinding wheel motor: 3,7 kW grinding wheel size: 300 x 50 x 76,2 mm cross adjustment: 100 - 1250 mm/min rapid traverse vertical: 180 mm/min table load: max. 700 kg distance spindle center to table: max. 525 mm total power requirement: kW weight of the machine ca.: 2,8 t dimensions of machine L x W x H: 3,14 x 1,78 x 2,50 m Accessories: magnetic plate 800 x 400 mm, grinding wheel with flange, wheel dressing attachment, wet grinding attachment with paper band filter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Siemens Sinumerik 840D control system, incl.: Abrasive preparation, hydraulic unit and portal loading system for loading and unloading the machine, Technical specifications:, Center distance: 600mm, center height: 180mm, maximum grinding diameter: 355mm, maximum workpiece weight: 150kg, maximum Z-axis speed: 11 m/min, minimum Z-axis speed: 0.01 m/min, maximum X-axis speed: 7.5 m/min, minimum X-axis speed: 0.01 m/min, External cylindrical grinding spindle:, Grinding wheel standard (Øa x w x Øi): 600 x 80 x 304.8 mm, Grinding wheel peripheral speed: 5 - 50 m/s, Power consumption of grinding spindle motor: 11 kW, Workpiece spindle:, Taper bore workpiece headstock: MK 5, Power consumption: 2.7 kW, Tailstock:, Taper bore punch point: MK 4, Coolant tank: 2000 liters, lubricating oil: 30 liters, hydraulic oil: 60 liters, Operating voltage: 400 volts, 3 phases, Mains frequency: 50 Hz, Total we ...

740 x 1,050 mm max. / 330 x 480 min. Size MABEG Scale Layer Flatbed die-cutter Punching force 1.8 MN / approx. 182 t HFS Hot Foil System Feeder stack 115 cm Display stack 85 cm Total meter approx. 12 million

Vertical tank made of AISI 304L stainless steel. Manufacturer: CALDERINOX. On legs. Capacity: 40,000 l. Top and bottom entrances. Mineral wool insulation. Atmospheric. Design temperature: 85º. Use

- Magnetic table 600 x 350 mm - Closed housing for CE - Senkrechtautomatik SA - Automatic lubrication - Coolant tank 

G+H precision external cylindrical grinding machine RS 600 CNC / P for machining multiple diameters in a single setup, in plunge or oscillating mode. Grinding table driven by a digital servo axis, ball screw with a 10 mm pitch, axis speed 0.01 mm/min - 15 m/min, positioning via linear scale, resolution 0.001 mm, V-flat slide guide, guideways are Turcite-B coated. Disc feed support driven by a digital servo axis, ball screw with a 5 mm pitch, axis speed 0.01 mm/min - 10 m/min, positioning via linear scale, resolution 0.0005 mm, V-flat slide guide, guideways are Turcite-B coated. Workpiece headstock with digital servo spindle, positionable with initiator for detecting the reference mark, adjustable 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm. Center height  ...

G+H precision finishing machine FI 600 for machining multiple diameters in one setup., Feed table driven by digital servo axis, ball screw with 5 mm pitch, axis speed 0.01 mm/min – 15 m/min, positioning via internal encoder, resolution 0.001 mm, mechanical cylindricity adjustment +10° - 4°, V-flat slide guide, guideways are Turcite-B coated., Z-table movable for positioning a sword finisher, The Nagel finishing head is provided by the customer. Workhead with digital servo spindle, positionable with an initiator for detecting the reference mark, adjustable from 0-1000 rpm; 2.7 kW power, MK5 taper bore, max. grinding diameter 260 mm. Tailstock with hydraulically operated quill, fine adjustment of cylindricity, max. center distance 600 mm, center height 140 mm., Full-room machine enclosure, approximately 2.3 m high, open on the sides, with integrated loader. Front sliding door electrica ...

Key data: 600 mm, 350 mm

G+H (Geibel + Hotz), FS 635 SA Built in 1997 Grinding area 600x350 Weight: approx. 2,600 kg

Size: 260 x 380 mm Equipments: Hot foil system: original HEIDELBERG Largest sheet 260 x 380 mm Smallest sheet 40 x 70 mm Max. Mold size 260 x350 mm Punching force 40 tons Capacity 5500 Bg./h 380 V 1,25 KW Own weight 1100 kg 2 Locking frame

grinding length: 600 mm grinding width: 350 mm workpiece height: mm total power requirement: 7,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU325W683 MakeMettler Toledo TypeFP82HT hot stage microscopy system LocationBarneveld Specified Features - Miscellaneous Motor100/120 volt, 230/240 volt Information Floor space0,31 x 0,48 m Total height0,15 m CEcheck Extra SpecificationsFP82HT is used to visually examine all kinds of thermal transitions when the sample is heated or cooled. The unit comes with the FP90 processorMiscellaneousMettler ToledoMiscellaneous > MiscellaneousBrand > Mettler Toledo What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

1 piece surface grinding machine FS 640 SC with Fagor control Make: Geibel&Hotz Year of Make: 2010 Technical data Working Range: Grinding area - Maximum grinding area 600 x 450 mm - Standard magnetic plate dimensions 600 x 400 mm - Clamping surface table to spindle centre 140 - 525 mm - Standard grinding wheel 300 x 50 x 76.2 mm - Table load incl. magnet 600 kg - Power grinding spindle motor approx. 3.7 kW - Total connected load approx. 11 kW - Table speed 2 to 28 m/min - Transverse/vertical speed 100-1000 mm/min Dimensions 3.95 x 3.16 x 2.47 m Machine weight approx. 2.1 t Facilities machine-specific accessories, belt filter system, magnetic separator, extraction Magnetic clamping plate with adhesive force control, automatic dressing incl. compension, Dressing diamond, balancing device, clamping device, 4 grinding wheels

RABOLINI IMPERIA C WITH AUTOMATIC FEEDER -Automatic Die cutting machine with Rabolini hot foiling attachment -Year: 1990 -Electromagnetic clutch -Max Sheet Size : 800x1100 mms., Max die cutting size 750x1050 mms. -Control cabin for sheet speed control from 900 / 1600 Sh/hour -Honeycomb plate for hot stamping, 2 chases and frames for die cutting -Three programmable heating zones from control cabin -Rabolini Hot stamping foil unit with programmable pulling rolls -Max pressure power: 280 tons -All parts and accessories -Available in April

This CEFLA Hotmelt SP1-EVO was manufactured in 2015. Ideal for woodworking applications, it ensures reliable performance for your projects. Consider the opportunity to buy this CEFLA Hotmelt SP1-EVO woodworking machine. Contact us for more information.

This GEIBEL & HOTZ FS 60 AC was manufactured in 2005. A robust surface grinding machine, it features a max workpiece size of 600 × 350 mm and a grinding wheel diameter of 300 mm. It supports a max workpiece weight of 400 kg and has a machine weight of 2010 kg. Consider the opportunity to buy this GEIBEL & HOTZ FS 60 AC surface grinding machine. Contact us for more information.

Frame Inner Dimension: 1450 x 1650mm Gas Type: Propane Operating pressure: 7 bar

grinding length: 600 mm grinding width: 400 mm workpiece height: 375 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Gewartet und Längsachse neu eingeschabt Glasmaßstäbe in der Senkrecht- und der Quer-Achse Schleifscheine 300/50/76,2 mm Magnetspannplatte 600x400mm mit Haftkraftregelung Universal-Papaierfilterautomat UPF100 mit 280l Tankinhalt. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cylindrical grinding machine manufactured in 2006. This GEIBEL & HOTZ RS 1000 CU features a center distance of 1000 mm and a maximum swing diameter of 355 mm. It is equipped with an electromechanical X-axis and Z-axis, offering feed rates of up to 12,000 mm/min. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ RS 1000 CU machine we have for sale. Contact us for further details.

Used Used labeller Ave Hotmelt 10.000 bph: Year: 1997 Condition: Good Used labeller Ave Hotmelt Year: 1997 Speed: 10.000 bph Direction: Clockwise 12 heads Nr.1 hot melt station. Safety protections. Code: EA 268 More details: https://bottlingscout.com

Control Other Grinding length [mm] 600 Grinding width [mm] 400 Grinding spindle: Speed 1,400 rpm Power 3.7 kW Grinding wheel dimensions (max.) 300 x 50 x 76.2 mm Work table: Clamping surface magnetic clamping plate, 600 x 400 mm Table load (max.) 600 kg Hydraulic table drive Longitudinal table stroke 200 - 650 mm Rapid traverse 28 m/min Grinding area 600 x 400 x 375 mm Equipment/accessories: Measuring System Engine Measurement System in X/Y/Z Dressing system prism arm for einkorn diamond Cooling coolant system with paper belt filter, tank capacity 140 l Other equipment Partial space encapsulation, work area light

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: hotset, heating element -Type: A06 Item No.: 246366 -Power: 800W 230V -Number: 2x elements available -Price per piece -Dimensions cartridge: O 8 x 285 mm -Weight: 0.1kg/pcs

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: hotset, heating element -Type: E03 Item No.: 140466 -Power: 800W 230V -Number: 2x elements available -Price per piece -Dimensions cartridge: O 8 x 350 mm -Weight: 0.1kg/pcs

Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Manufacturer: hotset, heating element -Type: G06 Item No.: 268471 -Power: 800 W 230 V -Number: 3x elements available -Price: per piece -Cartridge dimensions: Ø 8 x 295 mm -Weight: 0.1 kg/piece

Transport trolleys, platform trolleys, transport trolleys, wheels, table trolleys, assembly trolleys, complete wheels, tires with rims, stroller wheels, bicycle trailers -Manufacturer: Hota complete tire for strollers / bicycle trailers / scooters unused -Tires: 12 1/2 x 2 1/4 (57-203) -Rim: without bearings, inside O 25 mm -Quantity: 23 pieces -Price per piece -Weight: 1 kg / piece