hot plate line used for sale

Machine in good technical condition. Machine weight: 5300 kg Max. circling length: 2000 mm Max. sheet thickness: 12 mm Diameter of the upper cylinder: 220 mm Diameter of the lower cylinder: 200 mm Encircling speed: 6.2 mm/min

Capacity: 4250 x 8mm Hydraulic drive on the main role 3 roll driven Digital reading on the clamp and bending roller

Specifications: - Clamping surface approx. L 900 x D 600 mm - Table height 480 mm - Circulating water channel - 3 pieces T – grooves M 16 L 900 mm - side flange plate - Space requirement L 1000 x D 760 x H 480 mm - Weight approx. 300 kg

The machine is in good technical condition. Max. length of circled sheet: 2000mm Max. thickness of circled sheet: 4mm It is fully functional and without defects. It is quiet and fairly accurate. By prior arrangement, the possibility of a tour in progress.

- Granite top T/W/H: 750/ 500/ 20.5 mm - Aluminium plate B/D/H: 750/ 500/ 40 mm - Space requirement (W x D x H): 0.75 x 0.5 x 0.805 m - Machine weight: 370 kg - Condition: very good Details Measuring table or laboratory table with a granite plate and an aluminium plate with base frame glued to it, aluminium plate with threaded holes M8, hole spacing 50 mm

Printing plate punch hatchet; good condition; Max. Plate width 205cm; Perforation 1200/780/425mm Autoplate; 1200 and 425mm can be parked. Plate punch hatchet; good condition; max.plate width 205cm; punch 1200/780/425mm autoplate; 1200 and 425mm can be suppressible.

Spine heating plate Schmedt PräPara; good condition; cleaned and tested; Max. Book height 640mm; Max. Block thickness 110mm; Adjustable inclination. Book cover heating plate Schmedt PräPara; good condition; cleaned and chekced; max.book hight 640mm; max.block thikness 110mm; adjustable in tilt.

Zero point clamping system Manufacturer: Vischer & Bolli GmbH Type: 07/447749/Z This zero-point clamping system was used on a FIBRO rotary sliding table with a clamping surface of 2500 x 2500 mm.

Zero point clamping system Manufacturer: Vischer & Bolli GmbH Type: 07/447749/Z Dimensions: 2290 x 1000 x 120 mm

HENKE UNI 2000-6000 Built in 1995 Format: 400x400 2-speed 400x600 2-speed 1. Distributor for attachment 2. Doser 3. Settling device 4. Chain conveyor 5. Roller conveyor 6. Plate destacker 7. Cleaning device 8. Plate oiler 9. Pawl conveyor 10. Stacking device 11. Plate removal device with rotating device 12. Control for UNI 2000 13. Belt conveyor with lifting 14. Belt conveyor 15. Plate Displays 16. Carrier chain conveyor 17. Push-off device with roller table 18. Autom. Control for packaging 19. Fader Puller HENKE UNI 2000-6000 Year of production: 1995 Sizes: 400x400 2x 400x600 2x 1. First layer distributor 2. Dozer 3. Take-off device 4. Chain conveyer 5. Roll conveyer 6. Destacking device 7. Cleaning device 8. Oiling device 9. Slap converter 10. Stacking device with rotating device 11. Arm with rotating device 12. Control for UNI 2000 1 ...

Complete plate production plant OCEM / Cassani consisting of: - Dosing and mixing system Attachment mixer (Teka) like new (approx. 3 years old) - OCEM OPA108SB plate press with moulding device 400x400 4-fold - Attachment doser STP825 - Double washout system for exposed concrete (4-fold washing) - Flat shelf with transfer table - approx. 2,600 steel pallets - Cassani calibration machine - Grinding machine Cassani - Coating system with paternoster - Packaging line (built in 2019) Complete tiles/slab production line OCEM / Cassani consisting of: - Dosing and mixing plant - First layer mixer (Teka) as new (approx. 3 years old) - Double layer hermetic tile/slab press OCEM OPA108SB with mould equipment 400x400 4-fold - First layer dosing unit OCEM STP825 - Double washing system for washed concrete/exposed aggregates - Flat depositing system ...

Plate length: 2450 mm Plate width: 1000 mm Plate thickness: 1200 mm Number of T-slots: 7   Size T-slots: 28 mm Type of material: Cast Iron   MACH-id     5416 MAKE          Germany TYPE            YOP80´s SPECIFICATIONS Number off T slots        7 Jump from T to T       350 mm T size        28 mm DIMENSIONS Length        1000 mm Width          1200 mm Height          2450 mm Weight          2000 kg

Plate length: 2300 mm Plate width: 1400 mm Plate thickness: 2300 mm Number of T-slots: 10   Size T-slots: 28 mm Type of material: Cast Iron   MACH-id    5415 MAKE         Germany TYPE YOP             80´s SPECIFICATIONS Number off T slots        10 Jump from T to T         200 mm T size       28 mm DIMENSIONS Length      800 mm Width       1400 mm Height       2300 mm Weight       2000 kg

Plate length: 4500 mm Plate width: 1000 mm Plate thickness: 300 mm Number of T-slots: 4   Size T-slots: 28 mm Type of material: Cast Iron   SPECIFICATIONS Length   4500 mm Width  1000 mm Height   300 mm T -slot size  T 28 No. Of T-slots  4 x Distance from T to T-slot /   Jump  250 mm Weight a plate approx.4000 Ton Number off matching pieces 1

length: 12000 mm width: 4000 mm number: 6 Thickness: 300 mm T-slot - width: 36/60 mm T-slot - distance: 235 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Panel consists of 8 panels Size per panel 3500x1750x350Number of T-slots per panel 7 pieces Total 49 m² The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Plate length: 4500 mm Plate width: 2500 mm Plate thickness: 300 mm Number of T-slots: 10   Size T-slots: 28 mm Type of material: Cast Iron   SPECIFICATIONS Length   4500 mm Width     2500 mm Height    300 mm T -slot size   T 28 No. Of T-slots  10 x Distance from T to T-slot / Jump   250 mm Weight a plate approx.  9000 Ton Number off matching pieces  1

UBR32x2500 sheet metal rolling mill Year of production 1969 Dismantling, transport and all related costs are the responsibility of the buyer

Plate length: 6500 mm Plate width: 2250 mm Plate thickness: 305 mm Number of T-slots: 9   Size T-slots: 28 mm Type of material: Cast Iron   MACH-id   3553 MAKE  STOLLE Germany TYPE  SDT YEAR   2010 SPECIFICATIONS Length   6500 mm Width    2250 mm Height   305 mm T -slot size   9 x  No. Of T-slots   T 28 Distance from T to T-slot / Jump   220 mm Weight a plate approx.  11700 Ton Number off matching pieces   2   

Plate length: 7000 mm Plate width: 2500 mm Plate thickness: 300 mm Number of T-slots: 10   Size T-slots: 28 mm Type of material: Cast Iron   MACH-id   3554 MAKE  STOLLE TYPE    YEAR   2010 SPECIFICATIONS Length   7000 mm Width   2500 mm Height   300 mm T -slot size   T 28 No. Of T-slots   10 Distance from T to T-slot / Jump   220 mm Weight a plate approx.  13500 Ton Number off matching pieces   2    

Plate length: 5000 mm Plate width: 2500 mm Plate thickness: 300 mm Number of T-slots: 10   Size T-slots: 28 mm Type of material: Cast Iron   MACH-id   3555 MAKE   STOLLE TYPE    RDL YEAR   2010 SPECIFICATIONS Length  5000 mm Width   2500 mm Height  300 mm T -slot size   T 28 No. Of T-slots   10 Distance from T to T-slot / Jump   220 mm Weight a plate approx.10.300 Ton Number off matching pieces  2  

Plate length: 5500 mm Plate width: 2000 mm Plate thickness: 300 mm Number of T-slots: 8   Size T-slots: 28 mm Type of material: Cast iron   MACH-id   3556 MAKE   STOLLE TYPE   SDT YEAR   2010 SPECIFICATIONS Length   5500 mm Width   2000 mm Height   300 mm T -slot size   T 28 No. Of T-slots  8 Distance from T to T-slot / Jump   220 mm Weight a plate approx.  8000 Ton Number off matching pieces  2     

Plate length: 5500 mm Plate width: 2300 mm Plate thickness: 430 mm Number of T-slots: 0   Size T-slots: 36 mm Type of material: Cast Iron   MACH-id  3525 MAKE  EUROPEAN TYPE  CAST IRON YEAR SPECIFICATIONS Length   5500 mm Width    2300 mm Height    430 mm T -slot size    T 36 Weight a plate approx.  12.8 Ton Number off matching pieces  6 Clamping plates for sale For other floorplates : 

Disma Model 13-TLS motorized cylinder with 1050mm tempered roller. Rollers diameter 90mm. Voltage 3PH/380V

Plate length: 3500 mm Plate width: 1750 mm Plate thickness: 300 mm Number of T-slots: 6   Size T-slots: 36 mm Type of material: Cast iron   MACH-id  3526 MAKE    UNION Chemnitz Germany TYPE   SDT YEAR  90 er SPECIFICATIONS Length   3500 mm Width   1750 mm Height  350 mm T -slot size  T 36 No. Of T-slots  6 Distance from T to T-slot / Jump250 mmWeight a plate approx.6000 TonNumber off matching pieces3Clamping plates for sale size 3500 x 1750 mm,For other floorplates : 

Plate length: 5500 mm Plate width: 2700 mm Plate thickness: 450 mm Number of T-slots: 9   Size T-slots: 48 mm Type of material: Cast Iron   SPECIFICATIONS Length   5500 mm Width   2700 mm Height   450 mm T -slot size   T 48 No. Of T-slots  9 x Distance from T to T-slot / Jump  300 mm Weight a plate approx.14 Ton Number off matching pieces 3  

Plate length: 6000 mm Plate width: 3000 mm Plate thickness: 400 mm Number of T-slots: 12   Size T-slots: 42 mm Type of material: 0   SPECIFICATIES Vloerplaat lengte   6000 mm Vloerplaat breedte  3000 mm Vloerplaat dikte  400 mm T gleuf afmeting   T 42 Aantal T gleuven    12 x Sprong / Hart op Hart   250 mm Gewicht per plaat ca.16000 Ton Aantal zelfde platen beschikbaar  3  

Length: 1000 mm Width: 800 mm Height: 2000 mm Number of T-slots: 11   Size T-slots: 175 mm Type of material: Cast Iron   Make TOS Varnsdorf Type UU 200Year 2010 Capacity (metric tons)D = 1.000 Stroke (mm)W = 800 Distance Column/center (throat) mm H = 2.000Table length (mm) Weight = 2.500 Table width (mm)T Size = 22 H12T Pitch = 175 mm Number = 11 slotted New Price = 24.000 Euro a pair ! Cast Iron We can offer a pair ( 2 in Stock ) Very little used ! Beautiful Condition !  

Fuji Imaging Plate System/ CR System FCR Prima II with Reader CR-IR 391 RU Initial processing station / workstation 2 IP cassettes type CC 18x24 and 24x30 • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or system components must be carried out by the manufactu ...

Plate length: 3500 mm Plate width: 2000 mm Plate thickness: 260 mm Number of T-slots: 34   Size T-slots: 250 mm Type of material: Cast Iron   3.500 x 2.000 Type UNION Heckert Year 80 er Floorplates Aufspanplatten Plattenfeld Capacity (metric tons)1 piece in stock ! Length = 3.500 Width = 2.000 Thickness = 260 T 34 / 250 jump1 mark with repair Repair = 700 x 500

Plate length: 3000 mm Plate width: 1250 mm Plate thickness: 0 mm Number of T-slots: 0   Size T-slots: 0 mm Type of material: Cast Iron   3.000 x 1.25 Auffspanplatte plattenfeld prufstand Year80 er 1 in stock !  

Plate length: 2000 mm Plate width: 800 mm Plate thickness: 100 mm Number of T-slots: 0   Size T-slots: 28 mm Type of material: Cast Iron   Make 2000 x 800 (60x) Type INNOCENTI Year 60 pieces in stock L = 2.000 W = 800 T = 100 4 x T 28 in length ways 2 x T 28 in width ways Weight = 500 Kg Loading = 15 Ton / M2  

v.v. CNC control system; foot pedal; remote control; Hydraulically adjustable

Printing plate transport system Grafoteam MDT 36 TW; will be overhauled before delivery; right or left display; Max. Plate size 880x660mm; Color sensor. Printing plate conveying system Grafoteam MDT 36 TW; will be rebuilt before shipping; delivery to right or left side; max.plate size 880x660mm; color sensor.

-1,200 mm circulation, rotation height approx. 900 mm, -Copier, 5-fold tool turret, side support overhauled, -incl. scraping 2013, -Flood damage - but operational, no damage known.

-Electric roller roller, -Retractable top roller. -Thickness adjustable. -Plate clamp manually operated. -With foot control and emergency stop

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...

Equipped with manual control

without piping

unused

without piping

Equipped with pneumatic connection; 6 pieces of spare saw blades; digital control; excluding extraction; is dismantled