hot melt used for sale

Drive gear for hot forging press K8548 6300T Weight, kg 15 700

Driven gear for hot forging press 6300T Weight, kg 1300

Clutch hub for hot forging press K8548 6300T Weight, kg 7100

1 Continuous 5 Stand Hot Rolling Mill Mfc.: Fata Hunter Built: 2000 2 Rewinders Strip width: 480 mm Thickness: in 26 mm out 2.0 mm Qty. 1 Hot Gas Filter Mfc.: Nederman Built: 2015 Type: Flat bag filter Capacity Flow: 45000 Nm³/h Temp.: 125 °C Filter area: 650 m²

SPECIFICATIONS Description will follow as soon as possible.

HOT PRESS MODEL PL 90s 3000x1300 mm PS VBO TECHNICAL CHARACTERISTICS Platens dimensions 3000x1300 mm Stroke 400 mm Type of stroke Upstroke design (from bottom to top) Type of platen Assembled platens with coil and aluminum covering Total thrust 90 ton on 80% of the surface Pressing Cylinders N° 6 cylinders ø70 mm Specific Pressure 2.05 kg/cm2 on 100% of the surface 2.56 kg/cm2 on 80% of the surface Loading and Unloading Side3000 mm side Type of Heating system Oil boiler ? maximum temperature = 120°C Heating system specificationsElectric boiler 18 kW Opening Automatic by timer Control Board Standard Power supply 400V, 50Hz, 3ph Security device Safety rope around the press Red emergency Button Two Hand control Norma ...

HOT AIR GENERATOR model F28 , F55CV , F85CV , F120CV , F240CV NEW machines in prompt delivery CE marks: Yes NEW machines 30% OFF. PROMOTIONAL SUMMER 2024 Hot air generators mainly used for heating industrial environments using solid fuels, in particular biomass from industrial and forestry waste (wood). It protects the environment and saves energy. Indicative surface to be heated : model F28 heat m2=200 model F55heat CV m2=350 model F85CV heat m2=550 model F120CV heat m2=800 model F240CV heat m2=1000 Fuels: Wood - Chips - Peat

Hot Air Blower LEISTER Hotwind S ( HotwindS ) Type 9C1.2.2 102.586 2.3 kW 230 V AC max. 400 °C used, tested ! Dimensions: 430 x 220 x 150 mm

Heißpräge - Kniehebelprägepresse - Embossing Hot Stamping Press Krause FNP Serial-No. 4798 Stamping size: 550 x 400 mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

SPECIFICATIONS: Burning capacity Kcal/h: 69,000 Usual yield Kcal/h: 55,000 Air flow m³/h: 3,500 Electrical power of the fans KW: 0.5 Burning wood and legally permissible solid fuels. Weight kg: 305 SURFACE TO BE HEATED APPROX.: m² 200 / 250 - m³ 1,000

Hot Air Axial Fan, Axial Tubular Fan ASTO, JULIUS SÖHNLE AH03 450 0.77 m3/s up to 600°C (motor thermal, insulated with cooling air from outside) speed: 1375 rpm motor : 0.25 kW 380 / 660 V Inner diameter: Ø 450 mm New ! Dimensions: 500 x 600 x 520 mm

Mine pump, water pump, centrifugal pump HALBERG HOTA 08012 B Q: 31 m3/ h H: 164 m n: 1450 rpm P: 22 kW Mounting flange: 800 x 800 mm length under flange: 2080 mm connection ( input ): DN150 connection ( output ): DN80 motor: AEG, MENZEL type: AM225S4 37 kW 1470 rpm 400 V 3AC 50 Hz IP54 used ! Dimensions: 3830 x 800 x 800 mm

Hot Glue Gun SCA SCHUCKER AK 310-10/H/230V 7845.1000 D Heizung AK 400-450 230 V 0642.1003 New ! Dimensions: 230 x 100 x 130 mm

New hot press, hydraulically Brand: ITALPRESSE Type XL/6 30-13 PEA Golden electric heating plate surface anodized to ensure high surface hardness and excellent corrision protection. - Electrical - heating plates: 3000 x 1300 mm - Total pressure: 120 to. - Number of hot plates: 2 pc. - Number of floors: 1 pc. - Stroke: 350 mm - Day light opening: 350 mm - All-round feeding - Number of cylinders: 6 pc. - Diameter of cylinder: 85 mm - Power consumption (hydraulic unit): 3 kW - Electric - combi - heating plates made out of two components: Aluminium - electric - heating plate Iso printing plate - Heating power 22 KW - High pressure isolation plates - Operating temperature: 70 - 90° C. - Max. Temperature: 120° C. - Supply: 400V/50 Hz - Safety accordance with CE standard Standard equipment: - Movement of the press table with rack and pinion parallel guidance at t ...

Hot gas welding machine, multi-stage SCHLOMA ZIS-487/2 200 / 400 / 600 W 220 V AC approx. 2.8 m connection cable suitable air supply - see LU235 ! New !' Dimensions: 470 x 200 x 50 mm

Used biscuit line for round, square and hot dog buns BERTUETTI, type: 200 Universal - for round, square and long-rolled rolls, such as HotDogs - 4 rows - 1, 2 or 4 rows can be used - with settling on sheet metal - Dough intake - Sowing - Good condition, ready for immediate use Visits and test runs are possible by arrangement.

Mint dough line for continuous production of hot dog buns BERTUETTI, type: Universal Line - Unloader BM0-1-C707 - Trays 60 x 80 cm or 60 x 40 cm - Head machine SV 200 CTF 6040 - Lifting tipper for crates 60 x 40 cm and height 32 cm - Dough feeder SAL2 - Long scooter F70 - Sheet metal deposition in BM0 loader - Computer control - Dimensions line: L 7,128 mm, W 1,258 mm - Lifter tipping height: 2,974 mm - Very good condition, ready for immediate use The plant is being sold for restructuring. Visits and test runs are possible by arrangement.

Hot plate press (electric) Brand: ORMA Type: NPC 6/120 new machine Technical data: Heating plates: 3500x1300mm Cylinder: 6 pieces Press force: 120t Stroke/opening dimension: 450mm Connection value: 28.8kW (ELKOM plates) Options: - Intermediate plate - Anodized surface for ELKOM panels - Parallelism sensor á 1,000.00 EUR - Pressing mechanism from above (fixed lower plate) - Max. temperature till 150°C - Max. temperature till 200°C - 4-sided loading possible - Mylar protective film - Fiberglass Teflon protection - Hardware for Industry 4.0

Eccentric shaft by drawing K04.038.842-22-402 for hot stamping press K04.038.842 (K8542), 1600T brand new in state stale from stock W 4675 kg

We are looking for hotels for sale without a broker! Criteria: vacant hotels in need of renovation in Munich, Berlin, Hamburg and Frankfurt am Main or near major cities wanted Please send all offers to the contact person: Svetlana Ament E-mail: samentscholten-tanks.de Phone: 05924 255 485

Hot runner controller - Mold Masters M2XS-24 Year of Make: 2016 Description: 24 hot zones with cabling All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - JETmulti 32 Year of construction: Description: 32 hot zones with wiring All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - Mold Masters M1-24-24 / Like new Year of Make: 2019 Description: 24 hot zones with cabling All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - Feller Engineering MCS (2 pcs.) Year of construction: Description: 24 hot zones with cabling All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - PSG HR24D Year of construction: Description: 24 hot zones with cabling All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - DME (2 pcs.) Year of construction: Description: 12 hot zones with wiring All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - Mastip TC5 100-12-H-DHB-C-03 Year of manufacture: 2018 Description: 12 hot zones with wiring All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - Günther Year of construction: Description: 15 hot zones with wiring All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stock number: F763, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Hot print machine, Size: Print area 80 x 50 mm, Manufacturer: Elmoprint, Type: M-80H, Other: Item unit - Conveyor belt

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

Pneumatische Heißprägemaschinen/Lifting Hot Stamping machineGierlichPE 500 - 2P Baujahr / Year 1985 - Serial-No. 7458 Druckkraft / Pressure 5 kN Prägefläche / Embossing surface 100mm x 133mm Einsatzhöhe / Insert height 0-260mm Ausladung / Projection 220mm Folienbreite / Foil width max. 110mm Folienrollen / Foil rolls Ø120mm Prägetemperatur / Embossing temperature 50°C - 400°C

Hot runner controller - PSG Year of construction: Location: Lodz, Poland Description: 6 hot zones with wiring All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - Ewikon Year of construction: Location: Lodz, Poland Description: 6 hot zones with wiring All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner control unit - Ewikon (12 pcs.) Year of construction: Location: Lodz, Poland Description: 12 hot zones with wiring All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - Mold Masters M1-24-24 Year of Make: 2016 Location: Lodz, Poland Description: 24 hot zones with cabling All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - Mastip TC5 100-12-H-DHB-C-03 Year of manufacture: 2018 Location: Lodz, Poland Description: 12 hot zones with wiring All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - Gammaflux (5 pcs.) Year of construction: Location: Lodz, Poland Description: 6 hot zones with wiring All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Hot Runner Controller - Husky Altanium X-c-12-NEO2-12 Year of construction: Location: Lodz, Poland Description: 12 hot zones with wiring Touchscreen All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Hot runner controller - JETmulti 32 Year of construction: Location: Lodz, Poland Description: 32 hot zones with wiring All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Built in 1993 semi-automatic hot stamping press Embossing format max. 125 x 280 mm electr. Drive 1 foil preference 1 heating plate automatic feed Unwinding device for round materials / cans Underframe Delivery date: immediately from stock Price on request. We supply and install worldwide.

CONTROLS   PLC SIEMENS S7 300 PRESS DESIGN   drive system: hydraulic PRESS FORCES   total force (nominal): 800 to PRESS TABLE   table surface (left-right): 2600 mm   table surface (front-back): 2000 mm   height above floor level: 540 mm SLIDE   stroke: 900 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 460 mm/s   working velocity min.: 25 mm/s   working velocity max.: 44 mm/s   return velocity max.: 460 mm/s TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1700 mm ELECTRICAL SPECIFICATIONS   total power consumption: 180 kW DIMENSIONS / WEIGHTS   total weight approx.: 95000 kg ATTACHMENTS (PRESSES)   press automation: yes   gripper transfer system: yes   acc. to actual accident protection regulation: yes   European CE standards: yes Complete hot forming line consisting of: Hydraulic press NEFF 800 to. Ruhstrat furnac ...

VAN DEN BERGH FOIL-WIZARD (Hot foil stamping) INCL. ROLL UNWINDER HUNKELER S. No.: 02048020376 Equipment / Additional information: Incl. ROLL UNWINDER HUNKELER RW4-HS 7121 (M. No.: 1509697 // Age: 2004) With transfer station LCM 7084 (M. No.: 659595/2 // Age: 2001)

Sacot CA plank stacker. SCA. SAWMILL 1400 A professional stacker designed for automatic stacking of boards into even, stable and repeatable stacks. An ideal solution for sawmills and wood processing plants, significantly increasing efficiency and comfort of work. TECHNICAL PARAMETERS Stacking Material Length: 770-1400mm Stacking width: 1200 mm Stacking height: 1250 mm Machine dimensions: 4600 × 3700 × 2600 mm (H) Feeding/Receiving: Roller Receiving Table Structure: Steel, Industrial, Heavy Duty Control: Electric + Pneumatic The stacker is perfect for: sawmills, wood processing plants, production lines, production of short and medium elementsEXPANSION OPTIONS (optional): a complete technological line, including: Weinig Hydromat 23c planer 60m/min SACOT Formatizer SACOT stacker

Used hot air generator with oil burner Ready for operation at the site

TWO HHS HOT GLUE SYSTEMS to install on any folder gluer or any similar machine- from 1 to 4 glue points- years 2001/2006- Programmation- without guns- Price: 1.000 euro each LOT.

TECHNICAL DATA: Power consumption: 1 kW Working temperature: 470 °C Ideal for use on wood

M. No.: 46131 Equipment / Additional information: Stamping surface with heating head: HKAC max. 100 x 125 mm // HKBC max. 140 x 230 mm Stamping pressure at 6,5 bar with: 1 Zylinder ca 400 daN (kp) // 2 Zylinder ca 800 daN (kp) Readjustable stroke, dep. on pressure producer: 0-40 mm / 0-100 mm Max. passage height without/with sliding table: 300 mm / 275 mm Readjustable foil advance: 0-230 mm Max. foil width: 140 mm Heating voltage: 220 V / 50 Hz Heating capacity with heating head: HKAC 540 W // HKBC 900 W Temperature measurement by means of: Fe-Ko Max. output, hourly cycles: ca 4000

TECHNICAL DATA: Power consumption: 2.5 kW Working temperature: 470 °C Operating pressure: 5 bar Ideal for use on wood