hot forging press used for sale

Melton hotmelt adhesive appllicating system.

1.0 St. gebr. Temperature control unit with 48 control stations Manufacturer: GAMMAFLUX Type: GS1G030F024S4EJ Year of Make: 2019

Format : 73 x 104 cm (29”x 41”) Spiess feeder with pre-marge Front and side detection cells PC Control panel 3 x advances 2 x honeycombs straightened 2 x new honeycomb frames 2 x new heating units Air-conditioned electronic cabinet

Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical data  Capacity: 39,000 bottles per hour (bph) Bottle Formats: 1.5 L Worked Labels: IN REEL two label applicators  Reel Change: Automated Run Time: Approx. 55,000 hours Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) Working Conditions: 5-40 °C, 30-80% humidity, up to 1000 m altitude, no explosive atmosphere working direction: left-right/clockwise  bottle infeed/outfeed parallel on one side of the machine

Qty. 1 Second-hand Hot Rolling Mill Line Manufacturer: NKMZ Built: 1972 Roll Force: 2300 T (Periphery roll speed)Mill Speed: 0-24-210 m/min. Slab Thickness: 300-350 mm Width: 740-1540 mm Length: 1100-3000 mm Slab Weight: 1-2.7 T Slab Temperature: 370 – 550 °C Rolled Thickness: 8-200 mm Width: 750-1550 mm Plate Length: 2000-8000 mm Coiled Thickness: 6 – 12 mm Coiled Width: 700-1550 mm Coil I.D./O.D.: 750/1400 mm Coiling Temperature: 300-350 °C Back-up Rolls Dia.: 1500 – 1400 mm Work Rolls Dia.: 800 – 760 mm Roll Barrel Length: 1800 mm

KAMA TS 105 / HFS 105 Year 2007 Diecutting and Hotfoil Sheet size : 74 x 105 max. / 33 x 48 min. Cardboard thicknesss: 130 - 1500 g/m² (1.8mm) Max. pileheight feeder : 1150mm Max. pileheight delivery : 880 mm Features: Mabeg Feeder Digital control Sheet allignment KAMA HFS 105 hot foil unit

capacity / hour ca.: 12000 working direction: right-left (CCW) Strom / Volt: 400

diameter range 200 mm max. outside dia. of round pieces 200 mm kind of heating 200 KVA

diameter range 110 mm max. outside dia. of round pieces 110 mm kind of heating 335 KW

diameter range 64 mm max. width across flats 56 mm max. outside dia. of round pieces 64 mm bar dia. 18-40 mm cutting length 20-72 mm output - pieces/min 140 number of forming stations 3 press power 230 t

INDUSTRIAL TUMBLER DRYER MACHINE DE CROWN SST-200 BODY MATERIAL: STAINLESS STEEL SUS304/MILD STEEL. CAPACITY (MAX.WET) : 90KG DIMENSION: 2050mm(L) x 1800mm(W)x2200mm(H) POWER SUPPLY: 415VAC 3PH 50HZ. DRUM DIMENSION: 1480mm (OD) x 990mm(L) DRUM SPEED: 29 RPM.

Seamless Tube Hot Rolling Mill Equipment From European Seamless Tube production facility in France. Equipment Scope: Hot Rolling section combines Stiefel-type piercing and Assel-type elongation, followed by calibration and rotary sizing, enabling tight dimensional tolerances, low eccentricity, and flexible production scheduling. Learn More • Industrial-grade Hot forming and Rolling assets • Designed for seamless tube production - billet → pierced tube → elongated tube • Suitable for relocation, reuse, or integration into existing steel/tube operations Whatsapp +31 6 51199492 A. Reheating / Thermal Preparation Section • Billet heating furnace systems • Temperature conditioning systems for hot deformation readiness B. Piercing Mill Section (Core Tube Formation Stage) • Rotary piercing mill (seamless tube initiation) • Mand ...

Overview  The machine was built in 2018 by the german manufacturer KRONES and is designed for high-speed wrap-around labeling from the reel. This machine is ideal for bottling lines requiring flexibility across various labeling technologies. The machine was taken from a production line and is fully functional. It is available for inspection and can be disassembled, packed and shipped on request. Technical data  year of manufacture: 2018 Capacity: approx. 20,000 /h Bottle Formats: 0.5 L, 1.5 L PET  Worked Labels: IN REEL Reel Change: Automated Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) Modular Design (Plug & Play): Features automatic docking stations allowing quick and toolless changeovers between different labeling methods (e.g., hot melt, cold glue, self-adhesive, wrap-around) Versatility: Capable of han ...

Vertical stainless steel tank with various fittings., Additional title: vertical tank, Volume: 3158 l, Max. permissible pressure: 0,5 bar, Max. permissible temperature: 110 °C, Material: stainless steel, Position: vertical, Base construction: cylindrical tank with flat heads

Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  manufacturer: Krones, Germany model: Contiroll year of manufacture: 2008 labelling applicators: 2 (wet-glue heads) operation Direction: Right-machine, parallel on one side of the machine production Capacity: 45.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC

Hot-melt Case Sealer – OverviewThis used hot-melt case sealer by TE-CO is engineered for end-of-line industrial packaging within a used bottling line. The model 607-98 provides reliable, consistent closure of corrugated cartons using a hot-melt adhesive system, making it a proven solution for beverage production environments where wine bottles in cases must be sealed securely prior to palletizing. With robust construction and straightforward operation, it integrates seamlessly with upstream case packers and downstream palletizers to support continuous operation and optimized throughput.Manufactured by TE-CO, this second hand unit focuses on dependable carton closure, ensuring clean glue application, tight seals, and minimal maintenance demands. It is especially suitable for cases containing glass bottles in common formats used by wineries and beverage producers. Designed to work as par ...

Used Hot Melt Labeling Machine Kosme 20000 bphTechnical Specifications & Performance DataThis Kosme TOP 2 HM 16 720 is a high-speed hot melt labeler engineered for reliable performance in beverage production and industrial packaging. Optimized for PET containers, it supports demanding operations on a used bottling line while maintaining label accuracy at elevated speeds.Manufacturer: KosmeModel: TOP 2 HM 16 720Year: 2012Formats: Round PET bottle, 74mm diameter. ( can work both round and square bottle).Application: Hot melt labeling for PET containersProduction speed: up to 20,000 bottles per hour (format-dependent)Labeling stations: 1Number of plates: 16Head adjustment: availableOptical centering system: includedContainer types: PET (primary configuration)Dimensions: W 1900 mm × L 3000 mm × H 2300 mmWeight: 2500 kgElectrical: 400 V, 50 Hz, 9 kWCondition: in storage (second hand machine ...

Technical Specifications & Performance DataThis complete PET hot-fill bottling line is a high-efficiency used bottling line engineered for juice applications. Built primarily in 2010 with downstream equipment from 2011, it delivers consistent production at 24,000 bottles per hour (bph). The line integrates blowing, hot-fill filling, capping, labeling, secondary packaging, and palletizing, providing a cohesive solution for beverage production and industrial packaging needs.Production speed: 24,000 bphPrimary application: Hot-fill juiceContainer handling: PET bottlesValidated format example: 0.5L, 0.3L, 1.5LNeck mesurment: 28mmManufacturing years: 2010 (core equipment), 2011 (palletizer)Core components: Krones blow molder; CFT hot-fill filler-capper; DASE-SING labeling machine; DIMAC shrink wrapper; TCP bottle cooler and sterilizers (models T30R, TU170RD); TBC palletizer (model LT400)Line  ...

Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  manufacturer: Krones, Germany model: Contiroll HS 810-720     year of manufacture: 2015 neck handling machine, modification possible formats: 1,5L and 2,0L labelling applicators: 1 (wet-glue head), 2 magazines operation Direction: Right-machine,  production Capacity: 50.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC

Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  manufacturer: Krones, Germany model: Contiroll HS 810-720     year of manufacture: 2015 neck handling machine, modification possible formats: 1,5L and 2,0L labelling applicators: 1 (wet-glue head), 2 magazines operation Direction: Right-machine,  production Capacity: 50.000/h Worked Labels: IN REEL Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC

Equipment: Hot melt system HHS Promelt consisting of: 4 channels with 2 application heads and bracket, hose length approx. 4m, preparation for HHS/KAS control cables, electric valves, system trolley. SN 4705 0410 001

Equipment: Hot melt system HHS Promelt consisting of: 4 channels with 2 application heads and bracket, hose length approx. 4m, preparation for HHS/KAS control cables, electric valves, system trolley. SN 4705 0410 001

flue capacity: 34 kW; Conventional yeld capacity: 29 kW; flue diameter: 160 mm; hot air delivery pipes: 2 x 180 mm; flue length: 500 mm; oven width: 400 mm; oven hight: 590 mm; air flow: 2200 m³/h; power consumption: 400 W; aproximate surface to heat up: 500 m³; area to be heated: 100/150 m²; heater height without hot air conveying pipes: 1560 mm; heater width : 550 mm; heater lenght: 920 mm; weight: 190 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic ...

flue capacity: 510 kW; Conventional yeld capacity: 407 kW; flue diameter: 250 mm; hot air delivery pipes: 4 x 350 mm; flue length: 1900 mm; oven width: 900 mm; oven hight: 900 mm; air flow: 26000 m³/h; power consumption: 4500 W; aproximate surface to heat up: 8000 m³; area to be heated: 1800 m²; heater height without hot air conveying pipes: 3000 mm; heater width: 1220 mm; heater length: 2700 mm; weight: 1575 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special el ...

flue capacity: 350 kW; Conventional yeld capacity: 279 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 300 mm; flue length: 1200 mm; oven width: 740 mm; oven hight: 1040 mm; air flow: 17800 m³/h; power consumption hot air fan: 3 kW; power consumption flue gas exhaust: 600 W; aproximate surface to heat up: 5000 m³; area to be heated: 1000 m²; heater height without hot air conveying pipes: 2500 mm; heater width: 1100 mm; heater length: 1900 mm; weight: 850 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery run ...

flue capacity: 125 kW; Conventional yeld capacity: 99 kW; flue diameter: 180 mm; hot air delivery pipes: 2 x 250 mm; flue length: 750 mm; oven width: 560 mm; oven hight: 700mm; air flow: 6300m³/h; power consumption: 1500W; aproximate surface to heat up: 1500m³; area to be heated: 300/350 m²; heater height without hot air conveying pipes: 1980 mm; heater width: 800 mm; heater length: 1280 mm; weight: 415 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special elastic  ...

flue capacity: 175 kW; Conventional yeld capacity: 140 kW; flue diameter: 200 mm; hot air delivery pipes: 3 x 250 mm; flue length: 950 mm; oven width: 600 mm; oven hight: 860 mm; air flow: 6300 m³/h; power consumption: 8900 W; aproximate surface to heat up: 2200 m³; area to be heated: 500/600 m²; heater height without hot air conveying pipes: 2200 mm; heater width: 930 mm; heater length: 1700 mm; weight: 615 kg; Horizontal oven made of thermal chrome plated stainless steel, reinforced with ribs. Exchangers 2 or 3 smoke revs. Inner side made of bright sheet metal for casing and insulation. Outer side made of zinc plated sheet metal. Frame made of painted profile. Feeding doors with refractory and extractable grates. Panels with refractory for pipes cleaning. Double suction centrifugal fans for hot air delivery running at low regime of turns and arranged on special ela ...

Description: see pictures and type plates Type 1900 Operating overpressure 6bar Content 1720l Flow temperature 100°C Heat output 1400KW

Lacaze Energies 1000L Electric Hot Water Tank Auction-ID: A1-48805-182

Hot runner regulator Gammaflux G 24

Soldering device, magnifying glasses, heat gun

Heating element for Hotwind S film shrinker 380V/440 V, 4 pcs 4000 W 1 pc 5400 W Stock: 14 pieces

250 Watt hot cutter for foam. It is perfect for cutting foam, nylon cords, straps, synthetic fabrics and plastics (PP, PVC and EPS). Auction-ID: A7-49495-17

250 Watt hot cutter for foam. It is perfect for cutting foam, nylon cords, straps, synthetic fabrics and plastics (PP, PVC and EPS). Auction-ID: A7-49495-217

250 Watt hot cutter for foam. It is perfect for cutting foam, nylon cords, straps, synthetic fabrics and plastics (PP, PVC and EPS). Auction-ID: A7-49495-117

Prominox Cuve 12,588L Stainless Steel Hot Water Tank Auction-ID: A1-48805-175

Hot Box Tunnel Oven Variable temperature control 0-200deg.C Used for extrusion, currently used for Neoprene, EPDM, and Nitrile tube This is totally unique and does the job of a 25m long in 6m footprint.

VersaPUR bag melter 6080646 year 21 overhauled and cleaned PUR processing from environmentally friendly 20-litre bags with film coating. Melt-on-demand function to reduce thermal stress and protect bonding properties. Pneumatic piston to squeeze the adhesive out of the container, almost eliminating residues. Retention of sufficient adhesive in the hopper to continue operation during bag changes.

VersaPUR bag melter 7092486 year 18 overhauled and cleaned PUR processing from environmentally friendly 20-litre bags with film coating. Melt-on-demand function to reduce thermal stress and protect bonding properties. Pneumatic piston to squeeze the adhesive out of the container, almost eliminating residues. Retention of sufficient adhesive in the hopper to continue operation during bag changes.

Tandem hot melt system with two dosing pumps for PUR hot melt adhesives. Well-maintained condition, from production. 400 V, 50 Hz; dosing pumps and control available. Auction-ID: A7-49816-103

Equipped with: Towbar coupling, lighting, jockey wheel, handbrake, door, windows Auction-ID: A1-47416-58

Blomert S2000 horse trailer, type T2, built in 1993, equipped with an aluminium/polyester superstructure, braked tandem axle and a maximum permitted mass of 2,000 kg. The trailer is equipped with an overrun brake system, 50 mm ball coupling and a jockey wheel. The trailer has a tailgate/ramp, a side door, interior partition with breast bar, rubber floor, roof ventilation, ventilation windows and interior lighting. Thanks to its robust construction, the trailer is suitable for transporting one or two horses. Features: Brand: Blomert Model: S2000 Type: T2 Year of construction: 1993 Chassis number: W09T202023NB12115 Maximum permissible mass: 2,000 kg Max. nose weight: 75 kg Braked tandem axle Aluminum/polyester superstructure Tailgate/ramp Side door Inner partition with breast bar Rubber floor Roof ventilation and ventilation windows License Plate: WH-BT-26 The horse trailer is in used  ...

Industrial multi-chamber hot-air heating/reactivation oven, attributed to HIDRAGRUP S.L., configured with 4 separate heating chambers (No. 1–4). Each chamber is fitted with an individual hinged access door, perforated metal product tray/basket and separate status/control buttons. The machine has a large upper extraction hood with exhaust connection and is installed on a mobile steel frame with castors. Control equipment includes a Siemens SIMATIC OP3 operator panel, digital temperature controller, emergency stop and individual chamber controls. Offered in its current condition as pictured. Auction-ID: A7-50083-33

Industrial hot-air heating and reactivation oven, manufactured by HIDRAGRUP S.L., year of manufacture 2005. Designed as a multi-chamber heating system, apparently for controlled heating/reactivation of components or materials in an industrial production process. The machine features three individually controlled heating boxes/chambers (Box 1–3) with perforated metal product trays, hinged insulated access doors and individual timers/controls. Heating and airflow equipment includes multiple Leister industrial hot-air blowers/heaters, ducting and extraction/ventilation components. A separate electrical control cabinet is fitted with a Siemens SIMATIC OP3 operator panel, Omron temperature controllers, main isolator and emergency stop. Offered in its current condition as pictured. Auction-ID: A7-50083-32

Hot Foil Stamping Tiegel Heidelberg GTP Heißfolienprägetiegel / Hot Foil Stamping Tiegel Heidelberg GTP Baujahr / Year 1966 - Serial-No. 63 613 Format / Size min. 85 x 102mm Format / Size max. 340 x 460mm Geschwindigkeit / Speed min. min. 1.500sph - max. 4.000sph Stanzkraft / Punching pressure 60T Gewicht / Weight approx. 2250kg Abmessungen / Dimensions 2,08 x 1,48 x 2,10m Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame

Antique Embossing Hot Stamping Press Karl Krause KHP Antike Kniehebelprägepresse / Antique Embossing Hot Stamping Press Karl Krause KHP Baujahr / Year ca. 1930 - Serial-No. 48090 Prägefläche / Embossing Size max. 340 x 430mm Beheizung mit Gas / Heating with Gas Wunderschön verarbeitete antike Kniehebelprägepresse  Beautifully crafted antique Embossing Hot Stamping Press

Heißfolienprägemaschine in einem guten Zustand / Hot Foil Stamping Baier GEBA 1/F in good condition Heißfolienprägemaschine / Hot Foil Stamping Baier GEBA 1/F Serial-No. 26048 Druckleistung / Pressure max. 600Kg Prägefläche / Embossing size max. 180 x 220mm In einem guten Zustand / In good condition

Equipment: - Trailer (2-axle) - (Kz.: BF - ES 123) - (until May 2027) (Make: Anssems, PSX2) - (Registration date: 30.11.2012) - Hot water / foam - Heating - Tank (1000 ltr.) - Emergency power generator

250 Watt hot cutter for foam. It is perfect for cutting foam, nylon cords, straps, synthetic fabrics and plastics (PP, PVC and EPS). Auction-ID: A7-50065-117

Square design finishing part intended for a thermostatic built-in shower faucet from the Bloke series by Hotbath. This metal outer part is finished in the scratch-resistant brushed nickel finish. Technical features and specifications on the packaging: - Operation & Functionality: Equipped with a cubist central temperature handle and an overhead 2-way stop and diverter knob for manually switching between two connected water outlets (such as a head shower and hand shower). - Surface: Consists of a rectangular metal cover plate measuring 15x20 cm, two cube-shaped control knobs and the corresponding rosette rings. - System compatibility: This only applies to trim parts. Only works in combination with the universal Hotbath HB009 built-in part. Unused / New in original packaging (NIB). The box shows minor storage damage and features the official product sticker with model code Q009EXT GN and ...