hosokawa micron bv used for sale

Rental system Hosokawa Alpine AS 100 Aeroplex, not for sale. The Hosokawa Alpine Aeroplex AS spiral jet mill is a simple jet mill without dynamic classifier (different to our Hosokawa Alpine AFG) that allows the ultrafine micronization with a final fineness of around 10 to 150µm of different products. Mainly dry non abrasive materials up to 3 Mohs hardness can be pulverized although some models allow wear protection inserts within the grinding chamber (pending availability). The micronizer design without rotating parts (thus no bearings or grease) makes this mill especially suitable for pharmaceutical and food applications, although it´s used as well on the chemicals industry for instance. The comminution takes place inside the grinding chamber where the product is accelerated by the compress gas injected through the grinding nozzles causing the different particles to collide with ...

Rental Hosokawa Alpine UPZ 100 cryogenic system (LN2) by Alpine Rentals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX Suitable for cryogenic grinding with LN2 Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system with grinding tools of choice, small feeding hopper with a dosing channel, cooling screw to feed the LN2, LN2 container, filter and barrel to collect the fines. Includes an operating panel, switch cabinet and a vacuum cleaner. LN2 to be provided on-site This small size system with an universal mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. Suitable for the cryogenic grinding with liquid nit ...

Rental Hosokawa Alpine ACM 2 system by Alpine Rentals. The Hosokawa Alpine Mikro ACM impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process coarse products up to approx. 3 Mohs´ hardness by reaching an extremely high end-product fineness values between d97 10 to 120 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the grinding chamber where the rotor plate fitted with grinding tools (hammers or pins) impacts and projects the particles a ...

Rental Hosokawa Alpine RO 28/40 system by Alpine Rentals. Cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee, spices, dried vegetables, etc.). Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, non gas tight Material of construction: -product contacted parts: stainless steel -non product contacted parts: normal steel Food grade Wear protection: without Scope of supply Complete Hosokawa Alpine Rotoplex RO28/40 production plant consisting of: mill inlet with safe design for manual feeding, mill with rotor, knifes and sieve for the rotor, including a relays control cabine ...

Hosokawa Alpine MZM 1-40 classifier system by Alpine Rentals. Stand-alone lab scale air classifier, perfect for highly precise separation of small batches into a coarse and fine fraction. Adjustable cutting point, ranging from 0,1 to approx. 6 mm. Can be used for sorting and separating different materials. Thanks to the plexiglass cover it is ideal to observe the classification process inside the classifying tube. Technical details Stainless steel, plexiglass and glass Non ATEX, Non Pressure Shock Resistant (NPSR) Air flow 6-60m³/h Throughput approx. 3-30kg/h Maximum feed size approx. 10mm Scope of supply Hosokawa Alpine MZM 1-40 zigzag classifier complete with supporting frame, including feeding bin, cyclone, glass collecting bottles and vacuum cleaner. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental unit Hosokawa Alpine A FC 200 Flakecrusher. The Alpine AFC Flake Crusher is used to gently grind brittle and easily breakable materials in order to reduce their size. It can obtain low dust granulates thanks to its gentle crushing process controlling the maximum permissible top cut while avoiding the generation of undesired fines. It´s used for coarse milling and can reach particle siz ...

Rental unit, not for sale. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in Pharma design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for R&D and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental Multiprocess System in wear protected design. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coars ...

Rental Multiprocess System in stainless steel. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and super fine grinding are possible, providing a wide variety of end results. The exchange of the different modules is fast and easy, allowing to perform different tasks in a short time. Jet mills are subject to export license depending on destination country ALPINE multi-process plant AFG 100 (MPS) The basis of this concept is the use of a basic module which combines all the additional components of a grinding/classifying plant (frame, dosing system, fittings, separator filter, control system etc.). In j ...

Rental Hosokawa Alpine CS 25 compactor system by Alpine Rentals. Technical details Material of construction: - product contacting parts: stainless steel - non product contacting parts: stainless steel/mild steel - non ATEX - Non Pressure Shock Resistant (NPSR) Scope of supply Compactor CS25 with 11kW motor and AFC 200 capable of producing briquettes, granulates, pellets and even be used as a roller crusher depending on the fitted rolls (pending availability). The compactor allows to transform powder materials into briquets or granulates. Thanks to the extended range of accessories, such as different rollers and sieves, it´s possible to fully customize the form, size and shape of the end product adapting it to the required specifications. Suitable to process many different products for industries such as minerals, chemicals, etc. A HOSOKAWA ALPINE Originals machine Refurb ...

Hoshizaki HNC-120AE-L Sushi Display Case 120 cm Product Description The beautifully designed display cases keep the temperature and humidity at a constant level, unlike air circulation systems that dry out the sushi on display. As a result, the sushi stays fresh longer and the quality is visible at the highest level. The Hoshizaki display cases do not thaw so that no condensation drips onto the sushi on display. This always prevents contamination of the products. The included display grilles can be turned upside down to increase cooling performance. Manufacturer: Hoshizaki Model No.: HNC-120AE-L Sushi display case Width: 1200 mm Height: 280 mm Voltage: 220-240 Watts: 150 RRP 2900,-€ You can find more chest freezers in other sizes - new and used - in our shop! International shipping costs on request!

General SKU353S829 LocationBarneveld MakeHosokawa Micron TypeACM-15 Main Features Motor11 KW Inlet diameter160 mm Specified Features - Classifier mill MaterialMild steel Classifier Mills Grindercheck Rotor sizeØ 190x90 mm Grinding room sizeØ 275 mm Fixed hammerscheck Number of pins on house side:24 With grinding trackcheck InletØ 160 mm Feeding with rotating valvecheck Motor11 kW 400/690 Volts With variable speed drivecheck Speed160 - 1 600 rpm. Information No.600088071 Year of construction1988 Mounted on framecheck With switchgearas is Floorspace1,3x1,4 m Total height1,4 m Weight2 450 kg Extra Specifications1x filter Hosokawa MikroPul 38 S 6: 1x ventilator Caravent, HV 9R/M-1S, capacity: 0,5 m³/s, 2 930 rpm, motor: 18,5 kW 660-690/380-400 Volt: 2x mill: Hosokawa MikroPul :RAL 6, with spare partsClassifier millsHosokawa MikropulMills > Classifier mills ...

General SKU353S828 LocationBarneveld MakeHosokawa Micron TypeACM-15 Main Features Motor11 KW Inlet diameter160 mm Specified Features - Classifier mill MaterialMild steel Classifier Mills Grindercheck Rotor sizeØ 190x90 mm Grinding room sizeØ 275 mm Fixed hammerscheck Number of pins on house side:24 Without sieve cagecheck InletØ 160 mm Feeding with rotating valvecheck Motor11 kW 400/690 Volts Speed160 - 1 600 rpm. Information No.600880072 Year of construction1988 Mounted on framecheck With switchgearas is Floorspace1,3x1,4 m Total height1,4 m Weight2 450 kg Extra Specifications1x filter Hosokawa MikroPul 38 S 6: 1x ventilator Caravent, HV 9R/M-1S, capacity: 0,5 m³/s, 2 930 rpm, motor: 18,5 kW 660-690/380-400 Volt: 2x mill: Hosokawa MikroPul :RAL 6 Classifier millsHosokawa MikropulMills > Classifier millsBrand > Hosokawa Mikropul What you can expect from ...

USED HOSOKAWA PC 600 GRANULATOR REF.: C5705 General characteristics: Manufactured by HOSOKAWA Model PC 600 Year built 2001 Motor characteristics: Voltage 230/400 V Current 5.7/3.3 A Power 1.5 kW Frequency 50 Hz - 3f Rotational speed 1435 rpm Reducer characteristics: Rotational speed min. 63 o max. 316 rpm

Micronizer mill made of 316 stainless steel by HOSOKAWA. MICRON PROCES MS20 model. Material Stainless Steel 316/316L Technical characteristics Model MICRON PROCES MS20 Documentation No documentation Status In your state Manufactured by Hosokawa

Hoshizaki Ice Maker Stainless SteelProduct descriptionManufacturer: Hoshizaki Ice MakerMod.: FM-480AKE-HC-SBstand: used, functional, baker's condition - please clean thoroughly before useMaterial: Stainless steelYear of construction: Unfortunately it is not on it but probably a few years oldWith reserve containerStandard voltage: 220-240 V~ 50 Hz 5.3ADedetails see pictures.

General SKU363X853 MakeHosokawa Alpine LocationBarneveld CEcheck TypePulvis PV450 Main Features MaterialStainless steel Volume25 Ltr. Motor11 KW Specified Features - Ball mill Grindercheck (Agitated ball mill (dry grinding)) Ball mills Continuous ball millcheck Capacity25 l Drum sizesø 485 mm InletDN100 OutletDN100 With jacketcheck Motor11 kW Speed300 rpm With ballscheck Capacity25 l. Housing dimensions ø 485 mm InletDN100 With jacketcheck Motor11 kW Rotor speed300 rpm With ballscheck MaterialStainless steel 1.4301 (304) Information No.M3 239783 Year of construction2016 Mounted on framecheck With switchgearcheck (as is) Extra SpecificationsHosokawa Alpine Pulvis PV450 with Hosokawa Alpine ATP 140Dry agitated media mill for the production of ultrafine powders. The dry agitated bead mill is equipped with an integrated dynamic air classifier. Capacity:  ...

Stock - No. 2537 1 used,, functionally tested cutting mill/granulator Manufacturer: Alpine Hosokawa Type: RO 50 / 80 Built: 1993 Material feeding hopper: 500 x 840 mm Opening hydraulic Rotor diameter 500 mm x width 800 mm Rotor semi-open, 4 rotor V-cut - 2 Fixed blades Drive 55 kW Sieve diameter 10 mm Blower and Cyclone Throughput up to approx. 800 kg/h depending Material Machine is ready for demonstration from the Wuppertal plant, Date by appointment More granulators from stock ready to show, Ask for our current stock list or visit : plasticotrading

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The demonstration unit has so far only been used at trade fairs and for demonstrations. The machine is therefore as good as new. TECHNICAL DATA Chamber diameter 200 mm Gas pressure range 2 – 8 bar (g) Fineness range d50 1 – 40 μm Bn83a7ch Nominal gas flow 150 – 200 Nm³/h Dimensions (l/w/h) (without vacuum cleaner) 1.2 x 0.8 x 1.3 m Power supply 230 V; 2.2 kW REFERENCE PRODUCTS Product / End fineness / Throughput Celecoxib 90% ᐸ 2 ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Platform The platform has a universal adapter and contains the necessary electrical and mechanical components for all function modules. This gives you the opportunity to gradually purchase additional modules later and connect them without any problems. The Function Modules The modules contain all process engineering functional components for the respective picoline® variant such as classifier head, housing parts, grinding tools, motor adapters etc ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Alpine Ultraplex UPZ is a universal impact mill that can be fitted with a variety of easily interchangeable grinding tolls to achieve different results, such as pin disc, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks, sieves or a combination of both to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, gr ...

Hosokawa Powderplex Sifier Mill APP 400 Crushing and sighting Drive power 37 kW Engine speed 3000 1/min Pressure shock resistant up to 10 bar-Ü additional view terrad Very good ready-to-use condition, directly from production!

Nautical vacuum dryer Nautical vacuum dryer Hosokawa Alpine

Stock# U2415-1 Used stainless steel conical mixer by Hosokawa Milacron model DBXE-300R. Total volume 798 l, working volume 300 l. Mixer has top mounted stainless steel unsupported mixing screw, driven via gearbox and el. motor 2.2 kW. Rotating arm is designed in carbon steel and is driven via gearbox and el motor 0.18 kW. Bottom central discharge via outlet with diameter 200 mm and manually operated slide valve. Machine is mounted on three carbon steel legs and is equipped with local control panel. Last time machine had been working in food industry. Shipping dimensions: diameter 1400 mm x length 3200 mm x weight 800 kg.

Used compactor manufactured by HOSOKAWA BEPEX GmbH, model L200/50P. Year of construction: 1996. Roll dimensions: 200mm x 5mm Productivity: approx. 50 kg/h Material of contact parts: stainless steel AISI 304 The set includes a tank made of stainless steel: non contact parts made of AISI 304; tank made of AISI 316L Total capacity: 380 liters Working capacity: 350 liters Technical characteristic: Press force: 150 kN Roll diameter: 200 mm Roll width: 50 mm Drive power: 3 kW/inverter Roll cooling: no Direct press force measurement: yes Automatic press force control: no Adjustable roll gap: no Dust free construction: covers (modernization) Gas tight construction: no WIP/CIP design: no

General SKU300P652 LocationBarneveld MakeNauta Vometec Mikropul Type12 HP 4 TRL BV No.2107500038 Main Features MaterialStainless steel Specified Features - Fluid bed dryer batch Fluidbeddryercheck Pan sizesdia. 400mm Bottom dischargecheck With sprayercheck Without fancheck With dust filtercheck Filter surface3.6 m2 Cleaning with air pulsecheck MaterialStainless steel With jacketcheck General Year of construction2000 Floorspace2,0x1,6 M Total height3,5 M Weight1000 KgFluid bed dryers batchHosokawa MikropulDryers > Fluid bed dryers batchBrand > Hosokawa Mikropul What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU227S107 MakeHosokawa Alpine (D) LocationBarneveld CEcheck TypeLGM 20 ( Long Gap Mill ) Main Features Motor500 KW Specified Features - Fine Impact Mill Grindercheck Rotor sizeDia. 1950x800 mm Grinding room sizeDia. 2000x760 mm With hoppercheck InletScrew (Schneckenbau Prestel) (2x dia. 125mm) Motor500 kW 400 Volt Speed1100 rpm With jacketcheck Fine Impact Mills MaterialMild steel General No.P1172095 Year of construction2009 Floorspace4,9x2,4 m Total height3,0 m Weight22000 kg ATEX designedcheck Extra Specificationsincluding Reitz fan type KXE 160-063030-00 (2009) 630 m3/h 2980 rpm 200 kW 400/690 voltsincluding cyclone and heating unit with burner monitoring (as is )Fine Impact MillsHosokawa AlpineMills > Fine Impact MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new --  ...

General SKUR1410 MakeHosokawa Micron B.V. (NL) LocationBarneveld CEcheck TypeHMPD-20-10 (easy clean) Main Features MaterialStainless steel Motor0.55 KW Inlet diameter200 mm Specified Features - Rotating valve Rotary valvecheck Rotor diameterca. 250mm Rotor width215mm Number of locks:6 Lock sizes215x115x55mm Inletdia. 200 Outletdia. 200 Installation height390mm (with extension 490mm) With motor0.55 kW 230/400 Volt Rotor speed23 rpm MaterialStainless steel With jacketcheck General No.6444301000 Year of construction2000 Floorspace1,3x0,5 M Total height0,5 M Weight200 KgRotating valvesHosokawa MicronRotary valves > Rotating valvesBrand > Hosokawa Micron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, T ...

General SKU213X072 MakeHosokawa Nautamix NV Haarlem (NL) TypeDBX-300 No.M18123 LocationBarneveld Pressure Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume300 Ltr. Motor1.5 KW Specified Features - Conical mixer Conical mixercheck Capacity300 l. Largest cone diameter1200 mm Cone height1600 mm Dished topcheck Top drivecheck Motor1,5 kW, 230/400 volt, 1459 rpm Motorca. 0,4 kW Cantilevered screwcheck With jacketcheck Bottom dischargeDia. 270 mm MaterialStainless steel 1.4301 (304) With jacketcheck General With switchgearcheck Floor space1,40x1,40 m Total height2,40 m Weight800 kgConical mixersHosokawa NautaMixers > Conical mixersBrand > Hosokawa Nauta What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect t ...

General SKU364X867 LocationBarneveld CEcheck MakeHosokawa Alpine Main Features Motor18.5 KW Inlet diameter150 mm Width165 mm Specified Features - Hammer Mill Hammer millcheck Grinding room sizeø 300 mm Moving hammers24 Hammer width12 pieces 40 mm and 12 pieces 60 mm With sieve cagecheck Housing dimensions ø 300 mm Inletø 150 mm Motor18,5 kW (400 V, 2955 rpm) Speed6900 rpm Hammer Mills MaterialStainless steel Information TypeMP2-W No.P1 187094 /4050 Year of construction2013 Mounted on framecheck Floor space2,50 x 0,95 m Total height0,80 m Weight550 kg Extra SpecificationsWith: dust filter AZO blower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpm hopper with gear motor: 0.2 kW, 2730 rpm Hammer MillsHosokawa AlpineMills > Hammer MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...

General SKU364X863 LocationBarneveld MakeHosokawa Alpine Main Features Motor37 KW Inlet diameter150 mm Specified Features - Fine Impact Mill Grindercheck With sieve cagecheck Housing dimensions ø 1000 mm With hopper(for a milled product) Inletø 150 mm Motor37 kW (400 V, 2960 rpm) With variable speed drivecheck Speed820—4100 rpm With jacketcheck Fine Impact Mills MaterialStainless steel 1.4541 (321) General Type500 UPZ No.P1 187094 Year of construction2011 Mounted on framecheck With switch(as is) With control cabinet(as is) Floor space1,35 x 0,95 m Total height1,0 m Weight960 kg Extra SpecificationsWith: dust filter blower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpm hopper with gear motor: 0.2 kW, 2730 rpmFor the UPZ 500 we have the following additional items on stock AZO Coolable screw conveyor — SKU: 364X866 DMN Machinefabriek – Rotating valve ...

General SKU314W627 LocationBarneveld MakeHosokawa Micron TypeTorus-Disc TDJS 1000-3.15 Pressure Working pressure jacket3 Bar Technical specs Max. temperature50 °C Main Features MaterialStainless steel Volume3375 Ltr. Motor11 KW Specified Features - Continuous dryer Torus-disc dryercheck Continuouscheck Capacitybruto 3375 l (netto 2000 l) Trough sizes1120 x 3150 mm InletDN400 ManholeDN500 inspection port OutletDN400 With jacketcheck Shaft can be heatedcheck Max. temperature50°C Motor11 kW (400 V, 1500 rpm) Speed mixing shaft20 rpm Continuous dryers MaterialStainless steel 1.4301 (304) Information No.4056101000 Year of construction2001 Floorspace5,45 x 1,45 m Total height2,10 m Weight7500 kg Extra SpecificationsRotor: : : - volume 107 l. : : - working pressure 3 bar, design pressure 5 bar, test pressure 7 bar. : : - working temp 50°C, design temp ...

General SKU243W302 MakeHosokawa Nauta LocationBarneveld TypeMBXO-20R Main Features MaterialStainless steel Volume2000 Ltr. Motor4 KW Specified Features - Conical mixer Conical mixercheck Capacity2000 Ltr. Largest cone diameter1924 mm Cone height2700 mm ManholeDN400 Top drivecheck Motor0,37 kW, 220/380 volt With variable speed drive63 rpm Motor4 kW, 380/660 volt With variable speed drive1500 rpm Bottom bearing pintle bearingcheck Bottom dischargecheck 2x Dia. 200 mm Outlet with sliding valvecheck MaterialStainless steel 1.4301 (304) Information No.M.19065.B Year of construction± 1982 Floor space1,93x1,93 m Total height3,80 m Weight3000 kg Extra SpecificationsInput diam. 500mmConical mixersHosokawa NautaMixers > Conical mixersBrand > Hosokawa Nauta What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Rea ...

General SKU354T1381 MakeHosokawa Bepex GmbH LocationBarneveld TypeBX 200 T Main Features Motor3 KW Inlet diameter120 mm Specified Features - Mixing extruder Granulatorcheck Rotor granulatorcheck Rotor sizesDia: 200x50 mm Ring diecheck Die sizesDia: 200x55 mm Number of dies available:2 Die perforationDia: 2mm (4x), Dia 1,5mm(2x), 1,2x6mm Motor3kW, 220-240/280-420Volt, 1430 rpm With pre-mixercheck With motor1,5 kW, 220-240/380-420 Volt, 1400rpm InletDia: 120 mm (2x) With jacketcheck Mixing extruders MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) General No.18227-01 Year of construction2009 Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgear(as is) Floorspace1,3x1,05 m Total height1,75 m Weight680 kgMixing extrudersHosokawa BepexExtruders > Mixing extrudersBrand > Hosokawa Bepex What you can expect from Foeth: - ...

General SKU245P359 MakeMikropul Gmbh (DE) Type9-4 SC PSR No.4461 Year of construction1984 LocationBarneveld Main Features MaterialStainless steel Surface4 m2 Specified Features - Bag filter Envelope filtercheck Filter surface4 m² Number of envelopes:9 Envelope sizesdia.120mm x1200mm Cleaning by air pulsecheck With jacketcheck Bag filters MaterialStainless steel General Floorspace1,2x1,0 M Total height3,1 M Weight400 KG Extra Specificationswith extra filters :easy change system:Bag filtersHosokawa MikropulDust separators > Bag filtersBrand > Hosokawa Mikropul What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU245P306 LocationBarneveld MakeHosokawa Alpine Type160 UPZ No.6667 Main Features Motor6 KW Inlet diameter160 mm Specified Features - Fine Impact Mill Grinderplate beater Rotor sizedia.160mm Moving hammerscheck With grinding trackcheck Feeding with rotating valvecheck Motor4,9/6 KW, 380 Volt Fine Impact Mills MaterialStainless steel Information Year of construction1995 Extra SpecificationsComplete size reduction system including Rotary valve Typ 150 V2A, K-Tron Soder S200 dosing screw, dust filter and AERON filterFine Impact MillsHosokawa AlpineMills > Fine Impact MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mor ...

General SKUR1382 LocationBarneveld MakeHosokawa Mikropul (D) Main Features Motor15 KW Inlet diameter50 mm Specified Features - Classifier mill Grinderclassifying fine impact mill 2 Driven rotorscheck Rotor sizedia. 195mm Grinding room sizedia.330x130mm Pin diameter10mm (16x) With grinding trackcheck Inletdia. 220mm rotating valve to inlet 50mm Feeding with rotating valvecheck Motormill 15,0 kW, classifier 3,0 kW , 380 Volt Classifier Mills MaterialMild steel Information TypeACM 10 No.600088063 Year of construction1988 Mounted on framecheck With switchgear(as is) Floorspace1,5x1,9 M Total height1,2 M Weight900 Kg Extra Specificationswith ventilator, explosion valves and noise reduction pipeClassifier millsHosokawa MikropulMills > Classifier millsBrand > Hosokawa Mikropul What you can expect from Foeth: -- Machine is in working condition -- At a reduced price c ...

General SKU374U1018 MakeHosokawa Micron Europe B.V. LocationBarneveld Type100 RV-4 Main Features MaterialStainless steel Volume10000 Ltr. Motor11 KW Specified Features - Conical mixer Conical mixercheck Capacity10.000 Ltr Largest cone diameter3300mm Cone height4935mm Manhole2x With stainless steel armcheck Top drivecheck Motor11 kW, 380 volt + 1,1 kW, 220/380 volt Bottom bearing pintle bearingRadial screw bearing Bottom discharge4x Dia. 125mm MaterialStainless steel 1.4301 (304) With jacketcheck General No.101365/2310049 Year of construction1992 Floor space3,6x3,6 m Total height6,5 mDiscountConical mixersHosokawa MicronDiscountMixers > Conical mixersBrand > Hosokawa Micron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the m ...

General SKU318S553 MakeHosokawa Nauta LocationBarneveld Pressure Working pressure0.01 Bar Vacuum possiblecheck Working pressure jacket0.4 Bar Main Features MaterialStainless steel Volume4850 Ltr. Motor15 KW Specified Features - Conical dryer Conical dryercheck Capacity4850 Ltr. Largest cone diameter2000 mm Cone height2800 mm Dished topcheck Manholedia. 500 mm Top drivecheck Motor15 kW 380-415/660/720 Volt Bottom bearing pintle bearingcheck With jacketcheck 392 Ltr. Max. temperature20 °C Outlet with sliding valvedia. 250 mm (valve) MaterialStainless steel 1.4541 (321) Information No.86132 Mach.No.86132 Year of construction1987 Mounted in framecheck Mounted on framecheck Mounted on legscheck Floorspace2,5x2,5 m Floor space2,5x2,5 m Total height5,4 m Weight4000 kgConical dryersPaints & coatingsPowdered foodsGeneric medicinesFine chemicalsStarchOther che ...

General SKU316S544 MakeHosokawa Nauta TypeJ.P. K.T. No.unknown Year of construction1992 Mounted on legscheck Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume600 Ltr. Motor7.5 KW Specified Features - Conical mixer Conical mixercheck Double conecheck Capacity600 Ltr. Largest cone diameterdia. 1300 mm Cone height1560 mm Manhole(2x) With stainless steel armcheck Top drivecheck Motor7,5 kW 400/600 Volt Cantilevered screwcheck With jacketcheck Bottom dischargedia. 65 mm Suitable for liquid/pastecheck MaterialStainless steel With jacketcheck General LocationBarneveld Floor space2,5x1,3 M Total height3 M Weight1700 Kg Extra Specificationswith spare partsPaints & coatingsPowdered foodsGeneric medicinesFine chemicalsStarchOther chemicalPlastic & polymersFeed additivesOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectio ...

General SKUR0400 LocationBarneveld MakeHosokawa Nauta TypeDBXE-1800 R/S Main Features MaterialStainless steel Volume1800 Ltr. Motor11 KW Specified Features - Conical mixer Conical mixercheck Capacity1800ltr Largest cone diameter2200mm Cone height3060mm Top drivecheck Motor11 kW, 380 Volt Motor0,75 kW, 380 Volt Cantilevered screwcheck Bottom dischargeBall valve MaterialStainless steel 1.4301 (304) With jacketcheck General No.20142 Year of construction1981 Floor space2,3x2,3 M Total height4,8 M Weight2600 KgPaints & coatingsPowdered foodsGeneric medicinesFine chemicalsStarchOther chemicalPlastic & polymersFeed additivesOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicConical mixersHosokawa NautaIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Phar ...

General SKU308S486 LocationBarneveld Main Features MaterialStainless steel Volume200 Ltr. Motor2.2 KW Specified Features - Conical mixer Conical mixercheck Capacityca 200 ltr. Largest cone diameter1100mm Cone height1400mm Manhole530x260mm Motor2,2 kW 230/400 volt Cantilevered screwcheck Bottom dischargedia. 275mm With lump breakercheck Motor3 kW 380 Volt MaterialStainless steel With jacketcheck General MakeHosokawa Nauta Year of constructionunknown, manufacturer plate is missing Floor space1,5x1,2 M Total height2,2 M Weight600 KgPaints & coatingsPowdered foodsGeneric medicinesFine chemicalsStarchOther chemicalPlastic & polymersFeed additivesOther pharmaceuticsCosmeticsSugarAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicConical mixersHosokawa NautaIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered ...

General SKU202P126 MakeHosokawa Nauta BV Haarlem TypeMBXU-20 RVW Mach.No.M18666 Year of construction1973 Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket0.4 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor15 KW Specified Features - Conical dryer Conical dryercheck Capacity2000 Ltr Largest cone diameter1980mm Cone height3000mm Dished topcheck ManholeDN500 Stainless steel armcheck Motorarm 0,75 KW, 380 Volt Motorschroef 15,0 KW, 380 Volt Bottom bearing cross couplingcheck With jacket(8 m2) Max. temperature100 degr.C. Bottom outlet(1x) dia.150mm (1x) dia.75mm MaterialStainless steel 1.4301 (304) Information LocationBarneveld Floorspace2,1x2,0 M Total height4,85 M Weight3000 KGConical dryersPowdered foodsFine chemicalsStarchOther chemicalBiotechnologyCatalysts & fillersFeed additivesPaper & otherOther pharmaceuticsSu ...

General SKU260Y295 MakeHosokawa Micron Serial4140702000 Pressure Working pressure0.2 Bar Working pressure jacket3 Bar Technical specs Max. temperature200 °C Main Features MaterialStainless steel Volume380 Ltr. Motor15 KW Specified Features - Paddle dryer Paddle dryercheck Continuouscheck Capacity380 l./ 603kg/h Trough sizesDia. 400x3000 mm InletDia. 205 mm Manholecheck OutletDia. 205 mm With jacketcheck Shaft can be heated37l. , 1,3bar Max. temperature10-200°C Motor15kW, 400V, 720 rpm. Speed mixing shaft520 rpm. MaterialStainless steel 1.4306 (304L) With jacketcheck General TypeSJS 400-3.00 Year of construction2004 LocationBarneveld Floorspace4,5x1,5 m Total height1 m Weight5700 kg Extra SpecificationsPaddle dryer comes with gas-heated oil heater and oil pumps with valves:Brand: Ness Wärmetechnik GmbHType: WE 200Year: 2004Max. pressure: 10 barMax. t ...

General SKU286M327 LocationBarneveld MakeALPINE A.G./ Henco &: Co Type:ATP200 / 4ATP: Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Jet Mill Grinder:Multi-wheel air classifier Mill: Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm With jacketcheck Jet Mills MaterialCeramic, Mild steel General No.:unknown, manufacturer tag is missing: Year of construction±2006 Mounted on framecheck Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgJet MillsHosokawa AlpineMills > Jet MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mor ...

General SKU286M326 MakeALPINE A.G./ Henco & Co. TypeATP200 / 4ATP No.unknown, manufacturer tag is missing Year of construction+/- 2006 Mounted on framecheck Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Jet Mill GrinderMulti-wheel air classifier Mill Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm Jet Mills MaterialCeramic, Mild steel Information LocationBarneveld Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgJet MillsHosokawa AlpineMills > Jet MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU286M325 MakeALPINE A.G./ Henco & Co TypeATP200 / 4ATP No.manufacturer tag is missing Year of construction±2006 Main Features Motor7.5 KW Inlet diameter200 mm Specified Features - Jet Mill GrinderMulti-wheel air classifier mill Solid cone rotor4x classifierwheel ceramic Rotor size4x dia. 200mm, fine 5µ - 120µ Motor7,5 kW, 400/690Volt, 2900rpm Speed6000rpm Jet Mills MaterialCeramic, Mild steel Information Mounted on framecheck LocationBarneveld Floorspace2,1x2,1 m Total height4,0 m Weight3900 kgJet MillsHosokawa AlpineMills > Jet MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU014G031 MakeMachinefabriek Vrieco Zelhem B.V. TypeS 70 RB-S Mach.No.52624 Year of construction1978 Pressure Working pressure0.2 Bar Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume7000 Ltr. Motor20 KW Specified Features - Conical mixer Conical mixercheck Capacity8700 Ltr (7000 ltr nett) Largest cone diameter2950 mm Cone height4300 mm Dished topcheck Manhole500 mm With stainless steel armcheck Top drivecheck Motor13,0/20,0 kW (380 V) Motor1,1/1,8 kW (380 V) Bottom bearing pintle bearingcheck With jacketcheck Max. temperature120°C Bottom dischargecheck Outlet with sliding valvecheck MaterialStainless steel 1.4541 (321) With jacketcheck General LocationBarneveld Floorspace3,0 x 3,0 m Total height4,3 m Weight±6000 kg Extra Specifications-- RECONDITIONED --Powdered foodsFine chemicalsStarchReconditionedOther chemical ...

Type: 100 FSG, Y&l: 1986, granulation plant with circular gas operation, sifter 100 ATP (4 kW Vario, up to 11,500 rpm), and reblow filter K 6 R (2.4 m2 filter area). All in stainless steel. Very good condition.

Material: Stainless steel Built: 1993 Content: 1770 ltr Pressure inside: 0.5bar Pressure outside: 10bar Weight: 5000 kg L x W x H: 4700mm/900mm/1200mm An indirect heat exchanger with mechanical material transport. Very good condition. YOU ARE A NEW, OUTDATED AND USED