hormes gmbh co used for sale

We offer you a used levelling plate here. Technical data for the compensating plate: Manufacturer: Meta The scope of delivery includes: 01x Compensating plate, used Material colour: sendz. galvanized Dimensions: 140 x 140 mm Material thickness: approx. 3.00 mm Drill hole Ø: approx. 11 mm Hole spacing (measurement center – center hole): approx. 90 mm Weight: 0.45 kg | Piece Your contact person in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Temperature control device Manufacturer: single Temperiertechnik GmbH Type: STO 2-9-42-01 N°: 961599 Kerb weight: 442 kg Engine power: 2 x 2.3 kW Heating capacity: 2 x 9 kW Cooling capacity: 2 x 48700 watts very good condition with operating instructions LWH: 1600 x 600 x 1400 mm

Semi-automatic tube filling and closing machine for metaltubes including: - Tube D.35 format set - Coding device on one side - Tube feeder and tube alignment by hand

We offer you a used levelling plate here. Technical data for the compensating plate: Manufacturer: Bito, Type PRO Suitable for the base plate L; which are mounted on the shelf stand P1-P3. The scope of delivery includes: 01x Compensating plate, used Material colour: sendz. galvanized Total width: approx. 120 mm Total depth: approx. 105 mm Material thickness: approx. 0.5 mm Hole spacing (center - center hole): approx. 95 mm Weight: approx. 0.05 kg | Piece Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Qty. 1 Second-hand Decoral coating profile production line Mfc.: DECORAL Built: 2004 Type: VIV 801/2 – TRANSFER SEMI – AUTOMATIC Output (theoretical): approx. 90 pcs./hour Consist of: Bagging machine – CO 130BB Automatic crane – basket handling Gas Sublimation oven VV801/2.T Electrical Sublimation oven for small parts – 68 kW The table can handle up to 15 profiles per oven batch and given that the cycle time is less than 10 minutes. The line was in operation for 2-3 years only – 1 shift operation!

Qty. 1 Second-hand Electrostatic Multi Colour Powder Coating Production Line Mfc.: Gema Type: OptiFlex A2-14 Guns Built: 2013 OptiFlex A2 adjusts the air settings electronically by means of patented DVC System and monitors the production parameters continuously, resulting in a high quality coating Result. Work piece data – Aluminium Profiles Dimensions: 1800 x 400 x 6000 mm – H x W x L Conveyor speed: 2.0 m/min. One new Booth No. 2 (Mobile on rails) Magic Plus Booth” with cyclone recovery installed 2013, consisting of: Gema Electrostatic Powder Coating Equipment type OptiFlex A2 – 14 Guns With OptiFlex AS05 and OptiStar CG06 Gema Reciprocator System type ZA05-23 with carriage type XT10 for remote width positioning and outside cleaning Gema Control System type CM-30 Magic control including height recognition system Gema Quick Color change system Magic Plus with mu ...

Temperature control device Manufacturer: single Temperiertechnik GmbH Type: STO 2-9-42-01 N°: 961599 Kerb weight: 442 kg Engine power: 2 x 2.3 kW Heating capacity: 2 x 9 kW Cooling capacity: 2 x 48 700 watts new condition with operating instructions LWH: 1600 x 600 x 1400 mm

Temperature control device Manufacturer: Tool Temp AG (Switzerland) Type: TT-162E No.: 21-02064-1 with CE mark LWH: 600 x 300 x 750 mm

Temperature control device Manufacturer: gwk Type: teco cs 90 N°: 11936 Y.O.M.: 2002 Heating capacity: 9 kW Rated cooling capacity: 23 kW Maximum temperature circulating medium: 95° C LWH: 900 x 260 x 600 mm

Screw compressor system semi-thermal air conditioning compressor Compressor Chiller 2 x 30 Kw electric for air conditioning systems. 2x Screw compressor Manufacturer: RefComp Type: SRC-S-133 Ser.-No.: RE00093364 & RE00093366 400 V; 277/398 A; 50 Hz; IP54 rated power Leistg.: 30 kW Funding volume: 150 m3/h Pressure: 19-26.5 bar 3x Shell and tube condensers Manufacturer: WTK Type: CF270 CA2P Y.O.M.: 2009 272 kW (46.80 m3/h); 273 mm Tube Side: 10-11 bar; -10/+120 °C; 26.0 dm3; H2O Shell Side: 30-33 bar; -10/+120 °C; 85.9 dm3; gas with control box / control box with main switches, control & switching modules & pcd7. D232 terminal display. with piping and other various extensions, all mounted on a sturdy 4-edge dread tube frame. Total approx. 3450 x 1400 H 1900 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate s ...

Cooking cabinet made by ASCOTT, built in 2014, in a very good used and functional condition. Completely made of stainless steel. Chamber volume 3000 litres. Aditec digital control. Chamber size B/T/H 155/105/185 cm. External dimension B/D/H 195/135/275 cm. Natural gas connection required, electricity connection 230 volts. Workshop-tested, ready for immediate use. Further on request.

double piston compressor system semi-hermetically air-conditioning compressor Compressor Chiller 2 x 18.5 Kw with frequency inverters 2x Semi-hermetic piston compressor Manufacturer: Bock Type: HGX5/830-4 N°: AM18158A014 & AM37155A014 380/420 V; 50 Hz; 3 ph; 1450 rpm. Displacement: 72.20 m3; 19/25 bar Power with cooling conditions and refrigerant R407C: 39.32 kW Power with cooling conditions and refrigerant R404A: 41.27 kW Power with conditions and refrigerant R134a: 31.45 kW 4x Plate heat exchanger Manufacturer: GEA WTT Gmbh Type: WP7M-120 Y.O.M.: 2006 max. Pressure: 30 Bar Temperature: -195/+195 °C Content Page 1: 13.69 Ltr. Content Page 2: 13.92 Ltr. 2x Liquid collector Cat. 2 Manufacturer: FricoMEC Type: RV-300X606 Volume: 35 Ltr. Pressure max:28 bar Temperature: -10/+120 °C 2x Inverter Manufacturer: Fuji Electric Type: FRN18.5F1S-4E 3ph 380/48 ...

Storage number: 3590 CONTAINER ROTARY DEVICE Manufacturer: HENDRIKS, Type: 100 T Machines NR.: 06, Built: 2009 specifications: Size workpiece weight 100000 Kg Diameter 4800 mm Rolls slide. 700 mm Rolls width 480 mm Stepless rotations m/min Engine power 2 x 0.75 kw Drive rollers 1 pc Running rollers 1 pc Length: 3900mm (3700), Height: 1200 mm, Width: 1300 mm (900), Weight: 5000 kg

Complete non-returnable glass bottling line for hot fill and cold fill Krones / KHS Capacity: up to 33.000 bph by 500 ml glass bottles (the capacity depends on the product, the product temperature and CO2 content) Products: juices like orange juice, apple juice, tomato juice, etc. but also cold fill products like CSD with CO2 Bottle sizes: 250 ml - 1000 ml Capping type: 28 mm aluminium 33 mm aluminium twist-off cap 43 mm aluminium twist-off cap (the twist-off capping machine is included in the scope of supply) Labelling: paper labels with cold glue on the bottle Packaging: wrap around packaging (full carton) or tray packaging but without foil shrinking station Depalletizing and palletizing: full automatically Year of manufacturing: 1999 - 2007 This line was in production until end of 2025 in a German fruit juice and CSD company. It is stil ...

Mobile Medical Containers The medical containers provide a safe and secure environment for most medical applications in expedition base camps or mobile field hospitals. Made of high-quality materials that meet hospital standards, these medical containers offer an optimal solution for medical operations in difficult circumstances or harsh conditions by providing functional medical space with minimal logistical space requirements. 2 x containers equipped with medical rooms 1 x container with high-quality operating equipment, practice furniture Equipment: Practice furniture / laboratory equipment Medication refrigerators Heating asecos Hazardous Goods Cabinet Helios KWL EC ventilation system Mitsubishi Air Conditioner Esco Airstream Class II Microbiological Safety Cabinets Lighting APC UPS Areas of application Disaster relief and military Field clinics Expedi ...

The cover machine is used for the fast and efficient covering of mattresses of all kinds. It is specially designed for foam materials, especially foam mattresses. The cores to be processed can also be covered with cotton wool fleece or tricot material. How it works: The mattress cores are placed on a roller conveyor table at the back of the machine and then fed to the two pressing belts arranged on the side. Thanks to their non-slip profile, the press belts reliably capture the cores and guide them through the conically shaped inlet. The kernels are compressed in width to such an extent that the cover, which was previously manually applied to the mouthpiece, can be pulled over it without any problems. The pair of belts transports the cores safely and evenly into the cover. Adjustment: The height adjustment is infinitely variable via a handwheel and allows easy adaptation to diffe ...

We sell several 20 foot office and stay containers of different designs at reasonable prices. There are single containers, double containers, triple containers and quadruple containers. The containers are partly equipped with office furniture or cabinets. The location of the containers is Belgium. But we can organise mining and transport. Basic dimensions of the container length approx. 6055 mm, width approx. 2435 mm, height approx. 2350 mm. Price from 1500,- € + VAT depending on the number of units and execution.

Machine Details Stock No. 1105-03273 Type of machine Machining Center - Vertical Make HURCO Type VMX 42 M 2008 Year of Manufacture Type of control CNC Storage location FRANCE Country of origin taiwan Delivery time immediately Freight basis ex work Technical details x-travel 1060 mm y-travel 610 mm z-travel 610 mm work surface 1200 X 610 mm engine output (30 min. ED) 15 kW Distance between table and spindle 150 - 760 mm Torque 600 Nm rpm 30 min ED 22 Control Ultimax 4 weight of the machine about 6 t Additional information ultimax 4 8000 rpm

Touch Panel, Control panel, CP7822-0001-0010, Beckhoff, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Refrigeration display case / sales counter Model Jamaica 700 with 3 glass shelves Circulating air cooling Temperature +5 to +15°C adjustable Dimensions: 700 x 865 x 1360 mm, WxDxH Connection 230V, 400 watts Used equipment cleaned Visit our great sales shop!

Belt conveyor / conveyor belt / belt Colour: Light grey Manufacturer: AMI Fördertechnik Condition: Used Model: Webbing Strap Type: Longitudinal Grooves Total length: approx. 1610 mm Total width incl. motor: approx. 770 mm Total width without motor: approx. 690 mm Belt width: approx. 590 mm Metal frame Frame height: approx. 80 mm Including SEW motor (0.37 KW) Stock: 10 pieces Price per piece Internal Article Number: 2026020205 The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Pick-up address: Industriestraße 5 (47918 Tönisvorst) Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner ...

Cooling tower / water cooler Manufacturer Carter Environmental Engineers Type Sandrigham Serial number AQ 36068 Built June / 2006 2 x fan dia. 1500 mm Engine 380 V / 11 kW / 705 rpm 2 x centrifugal pumps Apex Type ISFC 125x100 Power 173 m3/h / H 35.36 m Engines Manufacturer WEG Type W22 Premium Power 37 kW / 2960 rpm Dimensions: LWH approx. 6,500 x 2,900 x 4,000 mm

Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Belt conveyor / conveyor belt / belt Manufacturer: VanderLande Condition: Used Year of Make: 2008 Total length: approx. 1650 mm Total width incl. motor: approx. 660 mm Total width without motor: approx. 500 mm Belt width: approx. 400 mm Strap Type: Longitudinal Grooves Material: Steel Frame height: approx. 170 mm Colour: Light grey Including SEW motor (1.1 KW) Stock: 37 pieces Price per piece The conveyor technology ran until dismantling. Internal Article Number: 2026020206 Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined con ...

Simodrive 611 control module, 6SN1 118-1NH00-0AA2, Siemens, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, Simodrive 611 Universal digital control module, 2 axes, optical encoder connection. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website.  ...

Parts made of compact tractor Shibaura SP 1840 (manual gearbox) with engine damage, e.B. cabin, rear axle gearbox, four-wheel drive front axle, three-point gear, steering, electrical parts, fairings, mask, wheels, front PTO gearbox, front lift, defective engine (cylinder head damage) etc.

pressure control valve, R6V10 595 W0 B1 220, Denison, mint condition Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Mint condition! - never been used and is in mint condition, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Belt conveyor / conveyor belt / belt Manufacturer: VanderLande Condition: Used Year of Make: 2008 Total length: approx. 1950 mm Total width incl. motor: approx. 870 mm Total width without motor: approx. 700 mm Belt width: approx. 600 mm Strap Type: Smooth (Color: Green) Material: Steel Frame height: approx. 170 mm Colour: Light grey SEW motor included Stock: 6 pieces Price per piece The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Internal Article Number: 2026020301 Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopes fo ...

Machine details Bearing number 1105-03282 Machine type Machining Center - Vertical Make FAMUP Type MCX 450 Built in 1997 Control type CNC Control FANUC OMC Warehouse FRANCE Country of origin Italy Delivery time immediately Freight base EX WORK Technical details x-path 450 mm y-path 300 mm z-way 400 mm Control FANUC OMC Spindle speed 8000 rpm Spindle motor 5 kW Rapids x/y/z 30 mm/min Table size 600 x 300 mm Tool change time 0.9 sec Tool magazine: 16 FACH SK 30 Information WITH CONTROL FANUC OMC 8000 RPM 5 KW 2.5 TONS MASSE 2 X 2.25 X 2.3 16 FACH MAGAZIN SK 30

Product number: 1998B Townsend MasterFormer Type: TA1521 Serial number: 10080439 Year of construction: 2010 Stork MasterFill Type: MTFII Serial number: 0441010 Year of construction: 2010 Stork Master Slice Type: DRST Serial number: 0420410 Year of construction: 2010 Caliber: 50 mm Karl Schnell vacuumfiller Type: P10SE, 596P Serial number: 22045 Year of construction: 2010 Power: 3 x 400V, 50Hz, 10.9kW Weight: 1180 kg Risco vacuumfiller Type: RS303 Serial number: T310021 Year of construction: 2010 Power: 3 x 400V, 50Hz, 7.7kW Weight: 830 kg With RS70 grinding head

approx. 15 pieces Transnorm conveyor curve 45 degrees - used - : Price per piece: 950.-€ (net), dismantled and loaded! Manufacturer: Transnorm Year of construction: 2010 Type: 1600-105 Nominal angle: 45 degrees Nominal briete / belt width: 800mm Belt type: KT 96 Nominal radius: 900mm SEW Engine Condition: good Available: now Location: Camp Frankenberg

1 piece of factory-new mobile residual concrete recycling plant RECYCLING PLANT for processing fresh concrete surpluses MREC 15 - MOBILE VERSION Manufacturer: RSM Type: MREC 15 Year of construction: factory new Washout capacity approx. 15 m³/h WAM washout screw Separation cut 0.3 mm - 1.00 pieces filling funnel - 1,00 pieces high basin (25m³) - 1,00 pieces intermediate pool (2m³) - 1.00 pieces of waste water mixer with console - 2.00 pieces of submersible sludge pumps - 1.00 pieces submersible pump - 1.00 pieces of control for residual concrete recycling plant - 1.00 pieces of flushing gallows - etc. The final painting is carried out according to customer requirements. Price on request Delivery time: immediately available Offer and prices are purely net from location Intermediate sale reserved, errors and/or misrepresentation reserved,

Slicer Bizerba Year of construction 2000 Price on request

Temperature control units Manufacturer: gwk Model: teco wv Machine no: 1) S001 2) S010 3) S030 4) 567 good condition with operating instructions Control via touchpad LWH: 1300 x 320 x 950 mm 4 pieces available

Temperature control unit Manufacturer: gwk Model: teco wv good condition with operating instructions Touch panel LWH: 1100 x 330 x 750 mm

Temperature control unit Manufacturer: Lauda Type: LTH140P No.: X12217 Power: 7 kW Filling volume: 5 l Year of construction: 1999 with operating instructions

Thank you for your interest in our used conveyor belt, which we can offer you as follows: Manufacturer : unknown Working width: 750mm electr. Values: 220V 1Ph Machine dimensions: 1200x800x1000mm (lxbxh) Details: Plastic conveyor belt with FU - speed controlled We offer this machine "in existing condition" under exclusion of any warranty / defect claims or assurances for sale. from stock Hess. Lichtenau; Unpacked

T9 - used approx. 20 m³ / 20,000 ltr steel tank with coated inside, standing upright. technical details: capacity: approx. 20 m³ / 20,000 litres material: steel tank with inner coating dimensions: Ø approx. 2.55 m × total height approx. 5.70 m Used steel tank with inner coating, professionally cleaned and in good condition. Standing, above-ground storage tank on 4 steel feet, lid on top of the roof and down at the tank bottom, several inlets and outlets. Steel rack and matching ladder available at an additional cost. The container can be used as a storage tank for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertise ...

New bellows probably Maho 700 old version

3692 KW Dresser Tuthill Nadrowski Tandem Condensation Turbine (steam turbine)for sale. 58.000 € plus VAT FCA freely charged in D-Bergisch Gladbach. Scope of supply: Steam turbo set and generator (6 KV). On request, generators with 10 to 11 KV are also available. A suitable capacitor costs 75,000 € extra. Not included: Control. Brand: Leroy-Somer Manufacturer: Tuthill Nadrowski Turbinen GmbH Type: LSA 56 BS 5- 4P Serial No.: 168233-1 Year of construction: 12-2001 Electr. Power: 3692 KW Power: 4625 KVA Voltage: 6000 V rpm: 1500 rpm Size (L x W x H): 3.10 m x 1.80 m x 2.70 m Weight: 10,000 kg Total output HD and ND turbine: 3692 KW. Total weight steam turbo set: 15 tons + 10 tons generator.

Machine Details Stock-No. 1105-03325 Type of machine Machining Center - Universal Make DMG Type DMU 70 V Year of manufacture (2000) Type of control CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details x-travel 750 mm y-travel 600 mm z-travel 520 mm table-size ø 700 x 500 mm spindle taper SK 40 spindle turning speed - stepless 20 - 12,000 rpm feeds longditudinal/cross/vertical 20,000 mm/min rapid traverse 50 m/min ATC 24x workpiece length 315 mm weight of tools max. 6 kg table load max. 0.35 t weight of the machine approx. 7 t Additional information , chip conveyor CNC CONTROL HEIDENHAIN I TNC 430 12000 RPM SK 40