hormes gmbh co used for sale

compressor compressor Copeland Stream, model

CONVEX® Combi-Tower - by UBERT - Made in Germany Two-in-One - The Advantages Combined arrangement for the smallest footprint. This also avoids long distances between sales rooms. Convex double glass doors for perfect product presentation, minimal heat loss and extremely low touch temperatures Intuitive user guidance thanks to plain text display Software update via USB interface Shorter cooking times of less than an hour for grilled chickens with a gross weight of 1kg each Programmable climate control in the cooking chamber for a perfect grilling result The new CONVEX® rotisserie Equipped with 3 heating systems in one device: Infrared for optimal tanning Convection for fast and even cooking Steam for juicier products CONVEX® dampers For the operating modes steam, combination, hot air, regeneration 8 levels (longitudinal insertion) for 1/1 GN ...

CACCIA HOT & COLD TURBOMIXER, Type CP1000, Hot mixer capacity 1.000 lt, 203 kw a.c.drive, + 1 CACCIA AG 3000, cooling unit, capacity 3.000 lt., installed power - used power in work: about 60-65% : 203 kw, availability: 3 weeks, capacity: 1000 hoìt -3000 cold, conditions: reconditioned, type: for PVC

Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Atlas Copco, screw block compressor stage from compressor type GA 408 Pack -Screw block: Type GA 408 -Final pressure: max. 8 bar -Shaft: Ø 40 x 55 mm -Dimensions: 760/490/H500 mm -Weight: 160 kg

Cheap used and new seeCONTAINER for sale in different versions! From current stock we can offer used and new sea containers for sale / leasing / rental: - 20ft (6m) Standard Box Container - 40ft (12m) Standard Box Container - 40ft (12m) High Cube Container - 20ft (6m) office container - 20ft (6m) sanitary container Special versions such as Double Door, Flat or Open Top are always available at short notice. Sightseeing is possible at any time and at short notice, for this we ask for a short telephone arrangement. Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 28mm waterproof hardwood floor. 20 feet (6m) of sea containers have two forklift pockets incorporated into the floor scaffolding and can theref ...

1 office container system approx. 1,500 m2 approximately 55 containers of 20 ft each. Modules Variable room layout 3 floors office building approx. 38 x 20 meters Sanitary facilities, stairwell, connecting passageways, air conditioning Price: on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange a ...

Straightening and cutting machine rolling from Coil. used test line please ask us for your special offer.

Cold water set make Combitherm Germany, water-cooled, cca.400Kw.with 2 pcs. Screw compressor Bitzer Type CSH 7571-90Y, refrigerant R 407C, two circles 50/50%, with control Digital uwm. Y.O.M.2005.Little used.state like new. Model KWW 7500 R407C

Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 409399-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tr ...

Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 77669-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tra ...

1987, CAP.: 75,000 T/ANNUM, STRIP WIDTH: 250 - 1300 MM, THICKNESS: 0.2 - 2.0 MM, COIL WEIGHT: 10 T, SHEET LENGTH: MAX. 4.0 M, 2-ND LINE: CAP.: 30,000 T/ANNUM, STRIP WIDTH: 700-1300 MM, THICKNESS: 0.3-3.0 MM; COIL WEIGHT: 10 T, SHEET LENGTH: 4.0 M, SPEED: 20 M/MIN.,

Precast Modular House Machine, Low Cost Precast Concrete House ERICH PETER MACHINES-PLANTS GMBH deals with complete solutions for the implementation of construction projects according to EU standards. We are not a construction company, but give the required knowledge in theory and practice to plan, calculate and implement construction projects. Business offers: ? Creation of necessary business, master and execution plans ? Sales of needed machines and plants for building material production ? Precast plant supply (new or refurbished) ? Plant commissioning and personnel training ? Concept & design for precast concrete projects as well as for multi-story wood structure buildings 5 key arguments: ? High speed buildings with short realisation time very important in all markets. ? High quality mainly in precast realised (minimized human failure) ? Low c ...

Comerio Ercole 1500mm wide x 550mm dia 4 roll inverted L calender. Peripherally drilled rolls (high pressure hot water heating), Motorised nip adjustment, Adjustable guides, Cross axis to roll 3, Unidrive gearbox with universal couplings. Motor power: Roll 1 and 4 - 50kW. Roll 2 and 3 - 60kW DC variable speed. Oil lubrication.

Colmec Italy 150mm dia coldfeed extruder, roller feed - 200mm wide, Screw length 2000mm, L/D ratio 13:1, with simple Spaghetti die/cutter assembly, jacketed barrel and cored screw for temperature regulation (no TCU's included). with 100HP, 1750rpm, 575V, 3ph, 60Hz AC motor (ex Canada) and controls. Fabricated bedplate. Screw height: 620mm. In very good condition.

Ariana Converger Stainless, 5 lanes into one, 5 x 60mm wide lanes into 120 x 60mm conveyor,adjustable side guides, easy adjust infeed height, product sensor.

From small through medium to big concrete batching plants, Prometal presents the most efficient ways of production of concrete with great results of high-quality concrete. Our customers can choose between 15 cubic meters per hour to 120 cubic meters per hour concrete batching plants. Long-lasting structures and stable design provides our customers with long term profitable investment with no regrets. The aggregate bunker is designed and manufactured to operate under heavy working conditions for a long time. There are 2 electro-pneumatically controlled discharge gates, which provide easiness and choice in the discharge together with suitable elevation. Aggregates are weighed by 4 units of load cells. Electric installation of concrete batching plant includes all electrical connections of voltage, controlling and part for measuring of the plant. All installations and sa ...

new compoundng extruders

Qty. 1 Second-hand continuous galvanising line Mfc.: Koryo SanGi, WMS Co., Sumitomo, Dongyang GiGong, Myungshin Mach., Kanto TK, Hitachi, Yuyoung Industry, Cosmo Gas, Hankuk Yugong, Jungwon Mach., Bugong Ind., Hanhyung Industry, SeunJin Mach., Cheongsong Electrics, Jungbu Civil Gas, HK. ENG, Cosmo Construction, KyungJin Construction, Cheonsu Hwankyung Ind., Shinhyeung Built: 1983 Some revamp in 2005 Material: Cold Rolled mild steel FH Strip Width: 650 - 1.250 mm Thickness: 0.2 -1.6 mm Capacity: REF: 27 Ton / Zn 1.2 Ton = 1 Hour HMI Main Control Operation system Zn Coating Wf 80 gm – 220 gm (Both Side) Coil Out Diameter: 2.050 mm Line Speed Max: 150 m/min Entry Section: 195 m/min Process Section: Max. 150 m/min Exit Speed Max.: 195 m/min

Stainless steel containment system Glovebox with insulators with scale and discharge screw for industry, pharmaceuticals, manufacturing and laboratory used , as good as new condition Manufacturer: Hecht Anlagenbau Type: 7.178710 Y.O.M.: 2008 / Nr.: 201040 Material: Stainless steel Test room area approx. 900 x 900 mm Front flap approx. 850 x 650 mm Servive flap on the side approx. 700 x 580 mm for the safe emptying of packaging, sack containers in the Pack Off system for pharmaceutical and chemical products to avoid contermination the containment system can be opened from 3 pages and has an eceleration in a connection on the side of approx. 350 mm Outlet at the bottom approx. 500 mm Opening rear approx. 100 mm Discharge screw with pneumatic valve Screw length approx. 1500 mm Screws approx. 110 mm Screw drive Siemens Z48-KQ - 1.7 L oil; 3000/113 rpm 4x Load cells "Fli ...

New galvanized or painted construction supports 3m, 3.50m, 4.00m at great conditions directly from the factory. From.21,50€/ Piece+ VAT Construction support painted 1,60m – 2,90m = 21,50€/piece reinforced version 2,00m - 3,50m = 23,50€/ piece reinforced version 2,30m – 4,00m = 26,50€/ piece reinforced version Construction support galvanized 1,60m - 2,90m = 25,90€/ piece reinforced version 2,00m - 3,50m = 26,90€/ piece reinforced version 2,10m – 4,00m = 29,90€/ piece reinforced version 1 frame for construction supports new, painted 70,00€ New inclined supports, painted 1,70m - 3,00m = 29,50€/ piece Inclined supports new, painted 2.10m - 3.50m. = 35,50€/ Piece Inclined supports new, painted 2,40m - 4,10m. = 38,50€/ Piece New inclined supports, galvanized 1,70m - 3,00m = 38,90€/ piece New inclined supports, galvaniz ...

WASHING INSTALLATION 90° One washer to washing system to clean the containers. The containers are tilted 90 degrees and transported through a washing device. The washing device consists of a housing that contains a spray device which is suitable for cold water with a pressure of 5bar. A conveyor belt to transport the containers. After washing, the containers are tilted back to horizontal position. No recycling water included. The concrete floor must be prepared to drain the water to a certain drain pit. The best option is lower the concrete floor in the area of the washer. OVERHEAD DE/STACKER For the PLC controlled movement, stacking and destacking of empty, containers with a maximum weight of 100 kg an overhead stacker/destacker is installed. The stacker/destacker can PLC controlled take up from:
-a-        The destacking position on the buffer (this is also the  ...

COMPAIR L11-7.5A screw compressor was built in 2014 in Italy. The compact oil-injected screw compressor with a capacity of 1820 l/min at an operating pressure of 7.5 bar delivers high-quality compressed air at low operating costs. All key operating parameters are continuously monitored by the state-of-the-art DELCOS PRO control, guaranteeing continuous and reliable operation throughout its service life. The screw compressor is additionally equipped with, among others, a refrigeration dryer, an oil separator and a 500 litre KOMNINO KPL-500/L-13 tank. The total weight of the machine is 219 kg. Technical specifications of the COMPAIR L11-7.5A compressor - capacity at maximum working pressure: 1820 l/min (1.82 m3/min) - maximum working pressure: 7.5 bar - suction pressure: 1 bar - motor speed: 3000 rpm - operating hours: 26399 h - operating hours under load: 4346 h - tank capacity: ...

Giusti, cooking vessel, steam jacketed vessel, 225L, central bottom discharge, stainless lid

Screw compressor - see pictures

Te Koop: Endress & Hauser conducta Alarmdekoder. Type MKD

Te Coop: Endress & Hauser Walter Contacters HTA 423

Te Coop: Endress & Hauser Walter Contacters HTA 380

- Single head machine - Direction : R – L - Different bottle sizes - In very good condition

PROFESSIONAL COFFEE FILTER MACHINE COFFEE QUEEN TOWER. Filter coffee machine with vacuum thermoses Coffee Queen Tower is a fast, flexible bulk coffee brewer with a hot water outlet for tea. It features digital display, full and half-brewing function as well as a signal to indicate when the coffee is ready. Brewing can take place on both sides simultaneously and the digital display shows the current temperature, brewing in progress and volume on each side. Characteristics: • Fast and easy to handle bulk brewer with hot water tap. • 2 uniquely designed 5 litre serving stations (vacuum thermoses) with tap, sight gauge and integrated handle grip. • Rotating function for easy handling. • Brewing on both sides at the same time. • Option for full- or half brew and brewing-complete signal. • Full brewing, 10 litres takes approx. 7 minutes. • Thermos with temperature drop o ...

Nitrogen cooling bath, Cryotherm, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used! The system was removed from a machine that had been in operation for a maximum of 2 years. Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the seller, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improvement, exchange, subsequent delivery or also for updating in case of digital components. Also excluded is the liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court  ...

ZUCKERMAN CHALLENGER- auto copy lathe and sander, capacity - ( mills 10" dia.by a max. of 120" long) hopper feed mills using cup cutters- followed by (1) sanding station, unit has hopper feeder, mills & sands one part at a time, does parts like: boat oars, shovel handles, gunstocks, chair legs, ect. Price-$10,900

Reichenbacker copy lathe mills/ turns (6) concentric or non concentric pieces at a time (1) station for your model/sample (models may be wood or metal) complete set up for duck decoys various sizes - items like Queen Ann legs, ect (photos available) (6) milling /working stations

Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)

continuous grilling line grilling surface (w x l) : 600 x 7.500 mm bottom contact grilling + hot air (with flip-over) grilling time : 1 minute to 60 minutes belt width ± 600 mm electrically heated power : 2x200 A, 2x140kW, 3 x 400V, 50 Hz belt washing system adjustable speed overall dimensions (l x w x h) : ± 10.315 x 1.230 x 2.338 mm weight : ± 4.500kg

The Bio Mark 7 is the largest commercial cold press juicer we manufacture. It features a quick release hopper using two toggle latches, meaning the hopper chute can be removed in seconds and requires no gasket like other manufacturers. It has a Slim top body that still raises up to allow faster bag cleaning and a press only option. It also is our only juicer with a speed control option on the grinder allowing you to control the speed of the grinder. The Mark 7 is for serious cold press juice production and can easily upscale your juice production with simple controls and exceptional performance. apacity: 12 Kg per batch Output: 70 - 100 Litres per hour ( depending on recipe ) Power: Single Phase 240 Vac 50/60 Hz 3.75Kw 22.9 Amp IP66 Max Press Pressure: 3000 PSI Operating Press Pressure: 2200 PSI Motor Power: 5HP Hydraulic Rams: Two Weight: 400 Kg Dimensions: L: ...

Laboratory roller for coating laboratory sheets (sample sheets) and plastics

2930-12-334-9601 / 0010985920 2930-12-F23-2495 / 8690980160

2x CHILLER with 660kW; each with 2x BITZER screw compressors; very few operating hours; in 2 containers with 2x recooler on the containers Technical data: Manufacturer: GWK Germany Type: SKW 2 -600 X 2x Bitzer Type: CSW 8593-125Y-40P Containers are heated Operating hours: approx. 5000h Year: 2010/2011, water tank approx. 8 m³ for cold water with 5 pumps 2 x GEA plate heat exchangers for freecooling 2 x 40ft Container High Cube B 3 m connected to each other 2 x GÜNTHNER Glycol Table Cooler W 2.4 m; 500 l capacity; on the container with 12 EC fans each (speed controlled) Refrigerant R134a; 34 kg per circle; Filled complete documentation very good condition more data: see pictures More pictures on request Price on request under infofrigocom.at

High-performance double-sided contact cooking. The Formcook Contact Cooker is excellent for cooking boneless products such as chicken fillets, meat patties, steak, bacon, pancakes, fish fillets, shrimp and vegetables. This cooker has been used to fry vegan products like buns and steaks. The machine was last used in February 2025. Fat-free contact cooking with non-stick belts seals the natural juices and fats in the product for the highest eating quality and minimum cooking losses. The cooking time is adjustable. The Formcook Contact Cooker is manufactured by JBT Corporation in Sweden. More information is available at JBT’s homepage. A conveyor machine manufactured by Ilpra is included. The contact cooker and the conveyor are complete and ready for use.

horizontal conveyor belt with hydromotor

Manufacturer: Atlas Copco, Type: GA 45, Year: 1991, Volume flow m³/min: 5,94, Drive power kW: 45, Drying unit: yes, Compressed air min/max bar: 10, Year :1991

Manufacturer: Costa, Type: Nastro, Year: 1999, Length mm: 2300, Working widht mm: 400, Drive power kW: 0,3, Year :1999

Complete Conversion Kit of TBA-19 330 ml prisam filling machine. All parts in original condition 10/10 and 100 % Tetra pak parts.

Manufacturer: Atlas Copco, Type: GA 55, Year: 1991, Control: Atlas Copco, Schraubenkompressor: yes, Running idle houres: 69200, Volume flow m³/min: 7,5, Verdichtungsenddruck bar 1: 12, Hauptläuferdrehzahl U/min 1: 2850, Antriebsleistung kW 1: 55, Year :1991

approx. 50 pcs in stock Office container - aisle container 16 Fufl / 20 Fufl / 24 Fufl 4.88x2.45x2.6m 6x2.45x2.6m 7.33x2.45x2.6m incl. electricity and lighting For conversion, expansion and/or refurbishment more information: We can configure the containers according to your wishes and conversions! Delivery possible!

Cooling compressor, Cooling compressors, Double compressor, Tandem compressors Manufacturer: DWM Copeland Type: DR6J1-4000-EWM Built: 1989 Condition: Used Weight: approx. 450 kg For more data, see also the photos All information without guarantee

COLOMBO AGOSTINO 225.400 coil stamping and punching line was built in 2006 in Italy by Colombo Agostino S.p.A. Its extensive machining capabilities and high reliability make it an excellent choice for series production of components, such as washing machine parts or automotive parts. The production process is fully automatic, thanks to a high-speed feeding system. It unwinds the sheet metal from the coil towards the work station, which features precision tools operating at a maximum force of 400 tonnes. The monolithic design of the machine further ensures high durability and stress-free operation. The COLOMBO AGOSTINO coil-fed punching machine weighs 75000 kg. The coil punching line is complete and consists of the following machines: – 400 t eccentric press: COLOMBO AGOSTINO – sheet metal decoiler: DEF CT 3/128 – coil lift table – sheet metal straightener RA 3000/4-8/120 A ...

RITTAL SK 3365.662 Wall-Mounted Cooling Unit – Blue e Series High-performance wall-mounted enclosure cooling unit designed to provide reliable temperature control for electrical cabinets and control panels in industrial environments. The RITTAL SK 3365.662 from the Blue e Series offers efficient cooling performance and energy-optimized operation for temperature-sensitive electronics. General Information - Manufacturer: RITTAL - Model: SK 3365.662 - Series: Blue e - Machine Type: Wall-mounted cooling unit Technical Specifications - Cooling Capacity: 1,500 W - Voltage Supply: 230 V AC / 50–60 Hz - Protection Class: IP54 (internal and external circuits) - Refrigerant: R134a Dimensions and Weight - Dimensions (W × H × D): 435 × 1,090 × 260 mm - Weight: approx. 45 kg - Condensate Management - System: Electrical condensate evaporation Key Features - Energy-e ...