130,794 used machines on RESALE, but how to find them? Machine Search
BAZ Spinner VZ 750 Year of construction: 2011 Hours : 6910 Spindle hours: 5114 Control Type: Fanuc OIMD-Alpha-Drive-HV-Technology Accessories: Chip conveyor Equipment: SK 40 Tool Pack
Flat Conveyor Belt FK 100 Width: 300 mm Length 2500 mm
Conveyor belt / belt flap / accumulation conveyor Working height approx. 850 mm, can be adjusted. Length approx. 800 mm Width approx. 450 mm Equipped with photocell to stop product when downstream machine occupies. Equipped with function pass-through flap -> straps stop as soon as the flap is lifted. Equipped with its own drive and controls. Fixed transport speed, no frequency converter installed. Machine runs flawlessly. New conveyor belts were installed.
Conveyor belt / belt flap / accumulation conveyor Working height approx. 850 mm, can be adjusted. Length approx. 600 mm Width approx. 450 mm Equipped with photocell to stop product when downstream machine occupies. Equipped with its own drive (attention, currently no own control). Equipped with recessed handle for easy product removal.
Conveyor belt length 1,350 mm Conveyor belt width 100 mm Web spacing 30 mm, web height 5 mm Conveyor belt made of white plastic, as good as new Adjustable inclination 1 speed Dust compartment Without inlet and outlet funnel Mobile Drive 400V/50Hz
Gas burner 1 flg. for city gas Heidebrenner AKO 70 Stainless steel Tabletop device Nominal heat load 3.8 kW Device is cleaned Dimensions: 410 x 410 x 200 mm, WxDxH Used device cleaned More bakery equipment in stock!
PROMAC Combination Belt Sander 322BE1 Motor 0.7 kW, 400 Volt Grinding wheel 200 x 25 x 20 mm Speed 2850 rpm Buffing disc Abrasive belt 100 x 1000 mm Belt speed 16 m/sec. Grinding surface 105 x 250 mm Dimensions 500 x 280 x 630 mm Weight approx. 28 kg
Key data: 2500
Engine; MTU204000L64 Year of Construction 2024 Operation hours; 0 (New) Electric power; max 2500kWe Construction form; 20 cylinders in V configuration Voltage; 10.5 kV Apparent power; 2.711kVa Speed; 1.500 RPM Frequency; 50Hz Model; Containerized Fully equipped with heat coupling & CHP MTU, GAS GENERATOR, CONTAINERIZED, CHP ROLLS ROYCE
Power extension cables, total 20 pieces ; see photos for more details Auction-ID: A7-46619-450
Glotter Metal Temperature control unit with chocolate pump and vibrator - Chocolate pump GM 950 - for pouring, filling or coating -Stainless steel - Vibrator EM 3045 - Tabletop appliance with drainer tray - With manual regulator - Temperature control unit with water bath heating - 20 to 50°C adjustable - Container with 15 liters - Ready to plug in Connection 220V, 1500 Watt Used machine cleaned More chocolate machines in stock!
Here, 40 feet of containers of Super High Cube DBCL40HCW with 1-2 sea routes 90.1 cubic meters volume will be auctioned. Due to the special internal dimensions, especially the interior height of about 3 meters, these containers are suitable as a storage area, but also ideal as a basis for a tiny house. These containers are also often used as a caravan or motorhome storage place, and classic cars also find the ideal place in them. There are also manufacturers who offer round roofs for containers to build an entire storage area and park your fleet in the middle. Also, some storage boxes/self-storage were built with these containers, where many craftsmen and self-employed people rent to store their material and tools, planning and execution can be asked. Please observe these neutralization obligations before submitting a bid • The buyer or buyers are obliged to return the container(s) w ...
Conveyor with modular belt, stopband, stopwatch with dimensions: tape width 510 mm Tape length 1800 mm SEW geared motor with brake 075 kW, 1380/42 rpm Self-collection in the area: Kędzierzyn-Koźle, Opole Voivodeship or by arrangement. This product is in stock. Joanna Multi-Industry Company + 77 482 44 99
Transnorm angled-belt conveyor 45° 1500-1250-1000 RA1850 Exhibit Make: Transnorm Year of manufacture: 2018 Inlet angle: 45 Length center: 1500 mm Belt width (RB): 1000 mm Frame height: 270 mm Nominal/external width (NB): 1250 mm Conveying speed: 0.717 mm V230/400 kW 1,5 Overall height side wall: 300 mm Scope of delivery: with motor and side guides (if required, please ask) Optional: Supports Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: scope of delivery: including side guides without supports Construction year: 2018 angle: 45° KW: 1,5/S1 Electric data: 220-240, 380-400 condition: Ausstellungsstück Conveying length in mm (NL): 1500 Frame width in mm (NB): 1250 Belt width in mm (GuB): 1000 Bauhöhe in mm (BH): 270 Antrieb: SEW Getriebemotor Optional erhältlich: Movi-Mot For individual ...
Auction-ID: A1-46694-2551
Key data: 760 mm, 460 mm, 460 mm
Vertical Machining Center Spinner VC 750 Year of construction: 2011 Control Fanuc OiMD X x Y x Z 760 x 460 x 460 mm Tool Changer 24 Fold Blow-out device SK 40 Tool Holder 5,100 spindle hours 10,000 rpm Conveyor Cooling via spindle Very good condition!
Key data: 550 mm, 450 mm, 500 mm
Machine Details Stock-No. 1105-03698 Type of machine Machining Center - Vertical Make CHIRON Type FZ 15 W HI SPEED Year of manufacture 2001 Type of control CNC Storage location FRANCE Country of origin france Delivery time ready for delivery Freight basis EX WORK Price Technical details X-Travel 550 mm Y-Travel 400 mm Z-Travel 425 mm control SIEMENS 840 D table surface area 600 X 350 mm tool taper ISO SK 40 spindle turning speed - stepless 20 - 12,000 rpm Feed Stepless 0 - 60,000 mm/min Rapid Traverse 60 m/min feed force X/Y axis 5.000 N feed force Z axis 10.000 N Tool Magazine: 20 diameter of tools max. 65 mm tool diameter with 2 vacant positions 150 mm Tool length - max. 220 mm Spindle diameter in front bearing 70 mm max. torque on the spindle max. 180 Nm Distance between table/spindle 280 - 705 mm distance between spindle/column 480 mm Milling capaci ...
Surplus/Never used or installed, High suction pressure compression unit of 5000 PSI, speed of 1000 RPM, 3550 HP, 10 MMSCFD flow rate. This compressor package consist of: One (1) Caterpillar G3612 LE, one Ariel Compressor JGD/6, Murphy Controls, Cooler and all auxiliary components. This unit was manufactured in 2015, but the project was cancelled. The compressor unit was never used or installed, having undergone a preservation maintenance in 2019. Recently inspected by Enerflex. It was found in excellent conditions!
Here, 40 feet of containers of Super High Cube DBCL40HCW with 1-2 sea routes 90.1 cubic meters volume will be auctioned. Due to the special internal dimensions, especially the interior height of about 3 meters, these containers are suitable as a storage area, but also ideal as a basis for a tiny house. These containers are also often used as a caravan or motorhome storage place, and classic cars also find the ideal place in them. There are also manufacturers who offer round roofs for containers to build an entire storage area and park your fleet in the middle. Also, some storage boxes/self-storage were built with these containers, where many craftsmen and self-employed people rent to store their material and tools, planning and execution can be asked. Please observe these neutralization obligations before submitting a bid • The buyer or buyers are obliged to return the container(s) w ...
Transnorm angled-belt conveyor 30° 1750-1000-800 RA2305 NEW Make: Transnorm Year of manufacture: 2022 Inlet angle: 30 Length center: 1670 mm Belt width (RB): 800 mm Frame height: 300 mm Nominal/external width (NB): 1000 mm, 1200 mm with motor Conveying speed: with Frequency converter for infinitely variable speed control between 0.25-0.75 mm/s, V230/400 kW 2,2 Overall height side wall: 200 mm Scope of delivery: with motor and side guides Optional: Supports Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: angle: 30° scope of delivery: including side guides without supports, inklusive Frequenzumrichter condition: Ausstellungsstück Antrieb: SEW Getriebemotor Electric data: 380-400 Bauhöhe in mm (BH): 300 KW: 2,2 Belt width in mm (GuB): 800 Optional erhältlich: Füße Construction year: 2022 Conveying length in mm (NL): 1670 Frame width in mm (N ...
Double-spindle machining centre in 5-axis design Travel x/ y/ z = 600/ 600(975) / 500 mm Number of spindles 2 Spindle spacing 600 mm Rapid traverse 45 m/min Spindle speed up to 17,500 rpm Drive power 38 kW Tool magazine 2 x 72 tool positions Tool holder HSK 63 CNC control Siemens 840D 1 x Tool breakage detection 2 x tension bridge support H75 mm 2 x tension bridges 5th axle Coolant system Knoll, 70 bar 1 x chip conveyor KB1000 1 x Drill Head Indexing 2 x Tool Planing System Control 2 x Upgrade Kit Torsion Compensation A/U Axis
Key data: 600 mm, 450 mm, 450 mm
achine details Stock-No. 1105-04026 Type of machine Machining Center - Universal Make MIKRON AGIE CHARMILLES Type UCP 600 Vario Year of manufacture 2006 Type of control CNC Storage location LAGER Country of origin Switzerland Delivery time to be agreed Freight basis ex site Price Technical details X-Travel 600 mm Y-Travel 450 mm Z-Travel 450 mm control iTNC 530 Heidenhain Turning Speed Range - Main Spindle max. 24,000 min/-1 Power capacity - main spindle 30 kW max. torque 91 Nm tool taper HSK-A63 surface area Ø 156 mm swivellable B: -101 / +45 ° rotatable C: 360° Table Speed 200 min/-1 max. workpiece sizes Ø 350 x 450 mm max. workpiece weight 80.0 kg numbers of pallets 10 number of toolpositions 30 pos. Max. mould width 80 / (125) mm max. tool length 200 mm Change time < 3.0 sec max. tool weight 6 kg max. total weight 80 kg Rapid Traverse 22 m/min ...
1 piece of used, technically overhauled reinforcing steel shears. The scissors work electromechanically. The engine was remounted. V-belt renewed. Machine painted. Cut is triggered by means of a footswitch on the front. Max. cutting capacity: 1 piece 32mm. D. Reinforcing steel bars. Connected load: 3KW/400V/16A
Transnorm curved belt conveyor left 45°-950-800-IR900 RA2306 Technical data: Frame width (NB): 900 mm Frame width with Bearing cover: 950mm Frame width with Bearing cover and Motor: 1250 mm belt width (GuB): 800 mm height (BH): 250 mm Inner radius (IR): 900 mm Conveying angle: 45° degrees conveying speed (v m/s): 0,42-1,50 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 0,75 / S1 Year of construction: 2022 Height Sideguides: 200 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2022 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 950 Belt width in mm: 800 angle: 45° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor speed m / s: freely adjustable scope of delivery: including side guid ...
Transnorm angled-belt conveyor 45° 1400-1050-800 RA2304 Exhibit Make: Transnorm Year of manufacture: 2022 Inlet angle: 45 Length center: 1400 mm Belt width (RB): 800 mm Frame height: 270 mm Nominal/external width (NB): 1050 mm Conveying speed: 0.717 mm/s V230/400 kW 1,5 Overall height side wall: 300 mm Scope of delivery: with motor and side guides (if required, please ask) Optional: Supports Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: scope of delivery: including side guides without supports angle: 45° KW: 1,5/S1 condition: Ausstellungsstück Bauhöhe in mm (BH): 270 Antrieb: SEW Getriebemotor Optional erhältlich: Füße, Movi-Mot Electric data: 380-400 Frame width in mm (NB): 1050 Conveying length in mm (NL): 1400 Belt width in mm (GuB): 800 Construction year: 2022 For individual, ...
New chain hoist with warranty Year 2013 Stroke 1/4 m/min complete with underlays, landing gear, etc.
Consists of control cabinet No. 1- 1-3 No. 2 - 4-6 No. 3 - 7
Make: BITZER Type: 6H-35.2Y-40P Flow rate: 110.5 m³/h Speed: 1450 rpm Operating current: 61A incl. BITZER liquid collector Type: F1052T Year of Make: 2008 Volume: 105L Min/Max Temp.: -10°/120°C Max. permissible. Pressure: 33bar Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at
- Flat pile feeder FD 66-T - Tremat - Digital Control - 6 folding pockets - 2 knifes - mobile stream delivery
maximum number of results exceeded
please refine your search
40 € 
