horizontal mixer used for sale

cutting diameter: 360 mm saw band length: 5200 x 34 x 1,1 mm cutting width: 700 mm cutting capacity - flat: 590 x 360 /30° mm cutting capacity - round: 360 / 30° mm cutting capacity - square: 360 x 360 / 30° mm cutting capacity - flat: 460 x 360 /45° mm cutting capacity - round: 360 /45° mm cutting capacity - square: 360 x 360 / 45° mm cutting capacity - flat: 305 x 360 /60° mm cutting capacity - round: 360 / 60° mm cutting capacity - square: 305 x 360 / 60° mm cutting capacity - flat: 700 x 360 / 90° mm cutting capacity - round: 360 / 90° mm cutting capacity - square: 360 x 360 / 90° mm speed: 20 - 100 m/min sawing motor: 3 kW hydraulic motor: 0,55 kW coolant pump: 0,12 kW voltage: 400 V / 50 Hz total power requirement: 3,7 kW weight of the machine ca.: 1460 kg dimensions of the machine ca.: 2850 x 1000 x 1850 mm Accessories: • Inverter • hydraulical vice • automatical ...

cutting diameter: 460 mm saw band length: 5200 x 41 x 1,3 mm cutting width: 460 mm cutting capacity - flat: 470 x 460 / 90° mm cutting capacity - round: 460 / 90° mm speed: 20 - 100 m/min voltage: 400 V / 50 Hz sawing motor: 4 kW total power requirement: 4,7 kW weight of the machine ca.: 1,665 t dimensions of the machine ca.: 2100 x 1300 x 850 m full-automatical band saw, Accessories: • Inverter for controllable speed, • automatical stop function after sawing and on breakage of the saw blade, • automatical saw arm lifting, • hydro-mechanical clamping of the saw blade, • material clamping to be effected from above, hydraulical vice, • switch for cutting pressure control, • coolant pump, • roller conveyor, length: 1.2 m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mm y-travel: 700 mm z-travel: 630 mm Control: Meldas M650 tool adaptor: HSK-A63 Table dimensions: 450x450 mm Table load: 400 kg number of spindle speeds: 300 - 20.000 min-1 total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis DOOSAN ACE HC-500 was manufactured in 2005. It features an X-axis travel of 850 mm, Y-axis travel of 700 mm, and Z-axis travel of 750 mm. The machine includes a robust pallet size of 500 x 500 mm with a maximum pallet load of 500 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN ACE HC-500 horizontal machining centre we have for sale. Contact us for further details.

This 4-axis MORI SEIKI NH4000 DCG was manufactured in 2013. It features impressive travels of approximately 560 mm in both X and Y axes, and 630 mm in the Z axis. The machine has a maximum speed of around 14,000 rpm and weighs approximately 10,000 kg with the rotary table. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH4000 DCG horizontal machining centre we have for sale. Contact us for further details.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 25 - 90 m/min total power requirement: 1,1/1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MORI SEIKI SH-400 Horizontal Machining Center was manufactured in 2000 in Japan by Mori Seiki CO., LTD. The CNC milling machine is equipped with Mori Seiki MSC-501 numerical control. The price of the machine includes various types of frames. Technical data of the MORI SEIKI SH-400 CNC milling machine - CNC control: MORI SEIKI MSC-501 - machine weight: 10100 kg

This 4-axis MORI SEIKI NH4000 DCG was manufactured in 2012. It features impressive travels of approximately 560 mm in both X and Y axes, and 630 mm in the Z axis. The machine has a maximum speed of around 14,000 rpm and includes a rotary table, CONSEP chip conveyor, and KNOLL coolant filter unit. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH4000 DCG horizontal machining centre we have for sale. Contact us for further details.

This 4-axis MORI SEIKI NH4000 DCG was manufactured in 2011. It features impressive travels of approximately 560 mm in both X and Y axes, and 630 mm in the Z axis. The machine has a maximum spindle speed of 14,000 rpm and a robust table size of 400 x 400 mm, with a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NH4000 DCG horizontal machining centre we have for sale. Contact us for further details.

This 4-axis HELLER MCi 25 was manufactured in 2003. It features a generous X, Y, and Z-axis travel of 800 mm each, along with a B-axis capable of 360° indexing. The machine is equipped with a tool magazine holding 80 slots and supports a total of 6 pallets. If you are looking to get high-quality machining capabilities, consider the HELLER MCi 25 horizontal machining centre we have for sale. Contact us for further details.

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 18 - 100 m/min table height: 940 mm total power requirement: 1,5 kW weight of the machine ca.: 0,65 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 220 mm saw band length: 2455 mm table height: 850 mm cutting width: 230 mm cutting speed: 25 - 80 m/min dimensions of saw-band: 2455 x 27 x 0,9 mm : 90 mm : 90 mm : 90 x 100 mm : 150 Impact energy: 150 Air consume per blow: 150 x 210 : 220 mm stroke back stop: 210 mm cross-slide: 230 x 185 total power requirement: 1,2 kW weight of the machine ca.: 0,24 t dimensions of the machine ca.: 1,2 x 0,6 x 1,7 m Miter cuts to 60 ° left - cutting speed 35/70 m / min. - Vice with rapid clamping device - Bandsaw blade guide made of hard metal - Band tension control - Electric cooling automatic. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 25 - 90 m/min total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 + 70 m/min total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis SCHMID SE 371 horizontal machining centre was manufactured in 2019. It features a Siemens Sinumerik 840 D SL control system, a shuttle table, and a 30-position tool changer with HSK-A63 tool holders. Additional highlights include a chip conveyor by Knoll and a recooling system by Lahntechnik. A great opportunity to buy this SCHMID SE 371 horizontal machining centre. Contact us for further details regarding this horizontal machining centre.

This 4-axis Starrag Heckert HEC 400 D was manufactured in 2012. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 80 tools, allowing for efficient machining operations. The machine includes two workpiece pallets with a size of 400 × 500 mm. If you are looking to get high-quality machining capabilities, consider the Starrag Heckert HEC 400 D horizontal machining centre we have for sale. Contact us for further details.

This 5-axis HELLER MC 20 was manufactured in 2012. It features an impressive X-axis travel of 1100 mm, Y-axis travel of 1100 mm, and Z-axis travel of 1000 mm. The machine is equipped with a Siemens 840D sl control unit and has a maximum fixture height of 1980 mm. If you are looking to get high-quality machining capabilities, consider the HELLER MC 20 horizontal machining centre we have for sale. Contact us for further details.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 18 - 110 m/min total power requirement: 1,5 kW weight of the machine ca.: 0,42 t dimensions of the machine ca.: 1,23 x 1,7 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 305 mm capacity 90 degrees: square: 260 mm : 350x200 saw band length: 3375x27x0,9 mm band speed: 37 + 74 m/min table height: 940 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,65 t dimensions of the machine ca.: 1,5 x 1,75 x 1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 510 mm capacity 90 degrees: square: 450 mm : 650x450 band speed: 15 - 100 m/min table height: 844 mm dimensions of saw-band: 5320 x 34 x 1,1 mm total power requirement: 3,0 kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: 1,9 x 2,87 x 1,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 225 mm x-travel: 8000 mm y-travel: 5600 mm z-travel: 2100 mm w-axis: 1400 mm spindle turning speed - stepless: 0-650 U/min spindle taper ISO: 60 feed stepless: 5 - 3000 mm/min rapid traverse: 5 m/min weight of the machine ca.: 150 t dimensions of the machine ca.: 12 x 5 x 8 m total power requirement: 120 kW Ram type horizontal boring machine was reconditioned and modernized in 2006, original yom was 1972. Control Siemens 840 C. Machine will come with tools and a vertical milling head. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal turning machine manufactured in 1998. This Weiler E35 features a center distance of 950 mm and a swing over bed of 410 mm. It has a spindle bore of 54 mm and a maximum torque at spindle of 700 Nm. If you are looking to get high-quality turning capabilities, consider the Weiler E35 machine we have for sale. Contact us for further details.

spindle diameter: 130 mm x-travel: 7000 mm y-travel: 2000 mm taper ISO: 50 w-axis: 1100 mm z-axis: 350 mm voltage: 400 V total power requirement: 30 kW weight of the machine ca.: . t dimensions of the machine ca.: . m Universal milling head Heidenhain D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis MORI SEIKI SL-253B MC/1000 was manufactured in 2000. It features a maximum turning diameter of 260 mm and a turning length of 1,035 mm. The machine is equipped with a spindle speed range of 35–3,500 RPM and a robust turret with 12 stations. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-253B MC/1000 horizontal turning machine we have for sale. Contact us for further details.

This 4-axis HELLER MCH 250 was manufactured in 2005. It features an XYZ travel of 800 x 800 x 800 mm and a pallet size of 630 x 630 mm. The machine is equipped with a 100-tool automatic tool changer and a 6-pallet pool for enhanced productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details.

This 4-axis HELLER MC 16 was manufactured in 1999. It features a maximum spindle speed of 8000 rpm and an automatic tool changer with 40 positions. The machine is equipped with twin pallets and offers an XYZ travel of 630 x 630 x 630 mm. If you are looking to get high-quality machining capabilities, consider the HELLER MC 16 horizontal machining centre we have for sale. Contact us for further details.

Horizontal tank made of stainless steel. The equipment was used as a recovery of mother water from a centrifuge. General characteristics: Material Stainless steel With manually folding lid, clamp and tube at the top and clamp discharges (1 in each bottom). Transport dimensions: Height: 900 mm Diameter: 600 mm Length: 1900 mm

This 4-axis HELLER MCP 250 was manufactured in 2000. It features a maximum spindle speed of 6000 rpm and an automatic tool changer with 52 positions. The machine is equipped with twin pallets and offers an XYZ travel of 800 x 800 x 710 mm. If you are looking to get high-quality machining capabilities, consider the HELLER MCP 250 horizontal machining centre we have for sale. Contact us for further details.

Auction-ID: A1-45793-43

This 4-axis SPINNER TC800 110 SMCY was manufactured in 2016. It features a maximum X-axis travel of 360 mm and Z-axis travel of 900 mm, along with a sub spindle and live tool capabilities. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800 110 SMCY horizontal turning machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 400 CM features a maximum chuck diameter of 500 mm, an X-axis travel of 620 mm, and a Z-axis travel of 2000 mm. It is equipped with a live tool for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 315 CM features a maximum turning length of 2,049 mm and a chuck diameter of 400 mm. It is equipped with live tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 315 CM machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2007. This BOEHRINGER VDF 400 CM features a 500 mm chuck and a live tool for enhanced versatility. It offers an impressive X-axis travel of 620 mm and Y-axis travel of 2000 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2007. This BOEHRINGER VDF 315 CM features a maximum turning length of 2,049 mm and a turning diameter of 400 mm. It is equipped with a live tool for enhanced machining capabilities. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 315 CM machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2004. This Weiler E55X1000 features a maximum chuck diameter of 315 mm and a spindle diameter of 120 mm. It includes a robust tool system with a turret and offers a cutting speed of 140 m/min. If you are looking to get high-quality turning capabilities, consider the Weiler E55X1000 machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2007. This Weiler E55X1000 features a maximum workpiece diameter over bed of 315 mm and a turning length of 340 mm. It is equipped with a Sauter 8-fold tool system and a spindle speed range of 1 – 2500 rpm. If you are looking to get high-quality turning capabilities, consider the Weiler E55X1000 machine we have for sale. Contact us for further details regarding this machine.

This 4-axis HELLER MCH 250 was manufactured in 2007. It features a spindle speed of 6000 rpm and a BT50 tool holder. The machine is equipped with an automatic tool changer that holds 100 tools, enhancing productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details.

cutting diameter: 170 mm dimensions of saw-band: 2080 x 20 x 0,9 mm table height: 880 mm cutting speed: 40 + 80 m/min : 170 mm : 125 mm : 150 x 190 mm : 95 x 120 mm total power requirement: 1,1 kW weight of the machine ca.: 0,24 t Dimensions (LxWxH): 870 x 1.550 x 1.740 mm mm Miter band saw Demonstration system at a special price ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 9-axis TAKISAWA TM-2000Y2 CNC Horizontal Turning Center was manufactured in 2022. It features a twin turret configuration with dual Y-axis capability, allowing for simultaneous machining. The machine includes a sub-spindle for complete machining and is compatible with bar work. If you are looking to get high-quality turning capabilities, consider the TAKISAWA TM-2000Y2 machine we have for sale. Contact us for further details.

This 3-axis DOOSAN LYNX 2100LMSA was manufactured in 2022. It features a maximum turning diameter of 300 mm and a turning length of 510 mm. The machine includes a 6-inch chuck size, a 12/24 station turret, and a sub-spindle for enhanced capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN LYNX 2100LMSA horizontal turning machine we have for sale. Contact us for further details.

This 5-axis DMG Sprint 50 2T was manufactured in 2012. It features a maximum turning diameter of 50 mm and a turning length of 550 mm. The machine is equipped with two turrets, each with 12 driven tool stations, and offers a rapid traverse speed of 30 m/min. If you are looking to get high-quality turning capabilities, consider the DMG Sprint 50 2T horizontal turning machine we have for sale. Contact us for further details.

This 3-axis DOOSAN Puma GT 3100 M was manufactured in 2022. It features a maximum turning diameter of 376 mm and a turning length of 725 mm. The machine is equipped with a 12-station tool turret and a three-jaw power chuck diameter of 305 mm. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 3100 M horizontal turning machine we have for sale. Contact us for further details.

This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2022. It features a maximum turning diameter of 255 mm and a turning length of 760 mm. The machine is equipped with a 24-station tool turret and driven tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 2600 SY II horizontal turning machine we have for sale. Contact us for further details.

This 3-axis Romi C420 was manufactured in 2013. It features a swing over bed of 430 mm and a distance between centers of 1,000 mm. The machine is equipped with a Siemens 802D control unit and has a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality turning capabilities, consider the Romi C420 horizontal turning machine we have for sale. Contact us for further details.

This 4-axis Romi GL 350B CNC Horizontal Turning Center was manufactured in 2014. It features a maximum workpiece diameter of 350 mm and a spindle speed of 4,000 rpm. The machine includes a counter spindle with a speed range of 6 – 6,000 rpm and a tool turret with 12 positions. If you are looking to get high-quality turning capabilities, consider the Romi GL 350B machine we have for sale. Contact us for further details.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 18 - 110 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 950 mm band speed: 35 + 70 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,42 t dimensions of the machine ca.: 1,23 x 1,7 x 1,75 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Auction-ID: A3-43519-12147

Auction-ID: A3-43519-12148

Auction-ID: A3-43519-12145