We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,889 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Horizontal round table - with bearing tracks Bearing tracks can be easily removed, Geraet fully ready for use without restrictions! Diameter 600mm construction height 140mm Partial setup via angular scale It's immediately available. Further horizontal parts available, please ask price. If you are not able to see what you need, please ask, we have not put the whole stock in place and probably the right one in stock. - Diameter 500mm built-in height 120mm with direct pitch over cam and angle scale - 2 pcs. diameter 400mm, can be used horizontally and vertically, indirect pitch for discs, once as good as new, once with bearing tracks Vertical sub-cameras and universal horizontal / Vertical pivoting sub-cameras 1. Walter with three-jaw lining 2. Lid with three-jaw lining and counter holder Special price
used
with palletech Table size 800 x 800 mm Table NCRT Number of pallets 14 Movement x-Axis 1300 mm y-Axis 1100 mm z-Axis 1000 mm Table indexing 0,001° Number in tools in magazine 237 pieces Maximum spindle speed 35-7.000 min Tool taper DIN 69871A-50 CNC control M-plus
used
Surface grinding machine
used
Many thanks for your interest on our second hand machines, please find follow our offer: Manufacturer : SIG Type : SB horizontal flow-pack YOM : 1988 Package size range : min. 60 x 30 x 5 mm (lxbxh) max. 410 x 180 x 75 mm (lxbxh) Trigger length : between 90 and 470 mm depending on the format range Roll width : up to 590 mm Output : up to 250 pcs./minute; infinitely adjustable Electricity : 220-380 V; 3 ph; 50 Hz supply chain length : ca. 5000 mm different: double foil roll holder automatic film splicer PLC Control date printer good Condition Nagema wafer cutter 5m long belt infeed We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked
used
Bei Fragen: 01718367957
used
Surface grinders - horizontal ELB-SCHLIFF perfect B-10 SPS Second-hand machine Grinding length: 1000 mm Grinding width: 400 mm Workpiece height: 450 mm Table size: 1000 x 400 mm Grinding wheel dimensions: 300 x 50 mm Grinding spindle motor: 3.5 kW Table speed: 2-30 m / min Grinding wheel speed: 1500 rpm Magnetic plate size: 1200 x 500 mm Total power: 15 kW Machine weight approx.: 4,5 t Space requirement approx.: 3.5 x 2.5 x 2.5 m General overhauled by 2015 with 12 month warranty Paper machine Magnetic clamping plate 1000 x 400 Automatic dressing device with compensation 1 flange Items put up
used
Used machine as good as new Grinding length: 600 mm Grinding width: 400 mm Workpiece height: 450 mm Table clamping area: 600 x 400 mm Grinding wheel dimensions: 300x50 mm Grinding spindle motor: 3.5 kW Table speed: 0 - 30 m/min Grinding wheel speed: 0 - 35 m/s Magnetic plate size: 600 x 400 mm Total power requirement: 15 kW Machine weight approx.: 4.5 t Room requirements approx.: 3.5 x 2.5 x 2.5 m 12 month warranty Paper filter machine Automatic table dressing with compensation 1 pc. flange Setting-up elements
Capacity 85 beats / min.
used
Surface grinders - horizontal ELB perfect BD 10 PLC Second-hand machine overhauled 2014 Surface grinders - horizontal ELB-SCHLIFF perfect BD 10 PLC Second-hand machine Grinding length: 1000 mm Grinding width: 600 mm Workpiece height: 600 mm Table size: 1000 x 600 mm Grinding wheel dimensions: 400 x 100 mm Grinding spindle motor: 11 kW Table speed: 2-30 m / min Grinding wheel speed: 0-35 m / s U/min Total power consumption: 35kW Machine weight approx.: 6 t Space requirement approx.: 3.8 x 2.5 x 2.5 m Part of 2014 overhauled with 12 month warranty Paper machine Magnetic clamping plate 1000 x 600 Automatic dressing device with compensation 1 flange Items put up
used
Plate filters/layers filter on role Manufacturer: KTM Troxler Type: FP 430 30 filter plates made of plastic DN 25 outlet with valve bottom Filter plate size: 40 cm x 40 cm In very good condition!
used
Qty.1 Second-hand milling (scalping) line Mfc.: Torrington Type: 30" Slap Miller Speed: 500 rpm – 18 fpm Capacity: 1,9 m/dk
new
Cutting capacity round 90°: 150 mm Section flat 90°: 145 x 150 mm Cutting capacity round 45°: 100 mm Section flat 45°: 90 x 150 mm Cutting capacity round 60°: 70 mm Working height: 890 mm Band saw blade dimensions: 1735 x 13 x 0.9 mm Cutting speed, continuous: 20-65 m / min Coolant pump: 100 W Engine power: 0,37 kW Voltage: 230 V Machine dimensions (L x D x H): 1000 x 510 x 1520 mm Approximate weight: 100 kg Features: -Adjustable cutting speed for optimal results -Standard with quick clamping vise and fence -Gearbox with hardened and ground Auger and bronze worm wheel -Fitted with base and coolant system -Ball bearing 3-point blade Guide no seeping effect of blade -For mitre cuts the saw handle is swung (up to 60 °), this space-saving work for long workpieces possible -Twist-free, heavily dimensioned saw bracket Scope of delivery: -Band saw blade -Work piece stop -Base -Quick cla ...
pressure:150 t total power requirement:20 kW weight of the machine ca.:11,5 t dimensions of the machine ca.:8800 x 1800 x 2200 mm Pressure adjustment via rotary control infinitely adjustable:15-150 t Cylinder diameter:100 mm Press speed (infinitely variable via joystick):0-9,9 mm/s servo motor:2 kW Cooling unit:1 kW Oil tank (under table):350 l Oil cooling (electric):1 kW (max)
used
unused counter-holder for horizontal fraesening for WMW FQ400CNC The gnholder has a counter bearing for the reception of the long fraesdorne. Special price
used
Horiontaler Round Table, probably unused - with bearing traces Bearing traces are easy to remove, Geraet fully ready for use without restrictions! Diameter 500mm Partial installation via sub-discs, indirect division Geraet immediately available. Special price
used
MORI SEIKI SH-500/40 Horizontal Machining Center was built in Japan in 1999 by MORI SEIKI CO., LTD. The machine is equipped with a numerical control type MORI SEIKI MSC-502. The milling machine has a table size of 500 x 500 mm and processes workpieces weighing up to 500 kg. The travel range of its X, Y, Z axes is 630 x 600 x 650 mm, respectively. The machine spindle rotates at 12,000 revolutions per minute. The milling machine is equipped with a magazine for forty tools with a maximum tool diameter of 150 mm, length 360 mm and a weight of 12 kg. The milling center is offered at a price with different types of holders. Technical parameters of the MORI SEIKI SH-500/40 CNC milling machine - CNC control: MORI SEIKI MSC-502 Travel range: - X axis (table travel length): 630 mm - Y axis (vertical movement of the spindle head): 600 mm - Z axis (cross table movement): 650 mm - distan ...
used
Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 400 mm Square: 400 x 400 mm Execution: Horizontal hydraulic Cut length: min.: 6 mm max: 750 mm Max. automatic forward feed length: 750 mm Cutting speed: stepless from: 20 m/min up to: 110 m/min Band length: 5090 mm Band width: 34 mm Sheet thickness: 1.1 mm Vice pressure max.: 20 - 60 bar Voltage 50 Hz 3x: 400 Volt Power: 8 kW Machine´s weight about: 2150 kg Overall dimensions machine: Length: 2420 mm Width: 2240 mm Height: 1915 mm Various accessories: Automatic forward feed Coolant system: 100 l Chip conveyor
used
Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0 Positions ATC: 0 CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 16-T Technical data Number of axis total: 5 Longitudinal travel (X-axis): 500 mm Transversal travel (y-axis): 400 mm Vertical travel (z axis): 500 mm B axis Pallets: number: 4 Length: 400 mm Width: 400 mm Maximum workpiece weight: 300 kg Tool changer: Number of tools: 96 Tool diameter max.: 80 mm Diameter with free adjacent pockets: 160 mm Tool lenght: 300 mm Max. tool-weight: 12 kg Time of tool changing: 2.5 sec Average chip-to-chip time: 6 sec Spindle nose: ISO: 40 DIN69871 Distance spindle nose to table: 100 - 600 mm Distance from vertical spindle to table: 20 - 420 mm Spindle speeds: stepless from: 0 rpm up to: 12000 rpm Feed range: 1 - 12000 mm/min Rapid traverse:: 20 m/min Air connect: 6 bar Volta ...
used
Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 300 mm Execution: hydraulic Max. distance from table to spindle-centreline: 500 mm Longitudinal travel (X-axis): 780 mm Transversal travel (y axis): 350 mm Automatic cross-feed: stepless up to: 7.00 m/min Table speeds: stepless from: 1.00 m/min up to: 30.0 m/min Automatic vertical feed: from: 0.0010 mm up to: 0.010 mm Vertical rapid traverse: 0.20 m/min Diameter of grinding wheel: 300 mm Width of the grinding wheel: 50 mm Grinding wheel speeds: number (steps): 2 from: 1775 rpm up to: 2180 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 8.15 HP Machine´s weight about: 3100 kg Overall dimensions machine: Length: 2100 mm Width: 1300 mm Height: 2450 mm Various accessories: Coolant system Wheel truieng attachment hydraulic ...
used
Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 400 mm Table width: 150 mm Grinding length: 400 mm Grinding width: 150 mm Execution: hydraulic Max. distance from table to spindle-centreline: 350 mm Table speeds: stepless from: 2.00 m/min up to: 20.0 m/min Automatic vertical feed: from: 0.0020 mm up to: 0.013 mm Diameter of grinding wheel: 200 mm Width of the grinding wheel: 16 mm Grinding wheel speeds: from: 2800 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 2.30 HP Machine´s weight about: 900 kg Overall dimensions machine: Length: 1300 mm Width: 1200 mm Height: 1500 mm
used
Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 750 mm Table width: 200 mm Grinding length: 500 mm Grinding width: 250 mm Grinding height: 375 mm Max. distance from table to spindle-centreline: 525 mm Table speeds: stepless up to: 30.0 m/min Diameter of grinding wheel: 300 mm Width of the grinding wheel: 25 mm Grinding wheel speeds: number (steps): 2 from: 1400 rpm up to: 2800 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 1.50 HP Machine´s weight about: 2250 kg Various accessories: Coolant system Magnetic plate: Length: 500 mm Width: 250 mm Wheel trueing attachment Creep feed
used
Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 500 mm Table width: 220 mm Grinding length: 550 mm Grinding width: 225 mm Grinding height: 200 mm Execution: hydraulic with automatic cycle Max. distance from table to spindle-centreline: 325 mm Longitudinal travel (X-axis): 500 mm cross travel (Z-axis): 250 mm Vertical travel (Y-axis): 300 mm Automatic cross-feed: from: 0 m/min up to: 2.5 m/min Table speeds: from: 0 m/min up to: 25 m/min Automatic vertical feed: from: 0.005 mm up to: 0.05 mm Vertical rapid traverse: 0.23 m/min Diameter of grinding wheel: 250 mm Width of the grinding wheel: 25 mm Wheel int. diameter: 76.2 mm Grinding wheel speeds: up to: 2100 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 3 kW Machine´s weight about: 1400 kg Overall dimensions machine: Length: 1850 mm ...
used
Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0 Positions ATC: 0 CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 640 Technical data Number of axis simultaneous: 5 Rotary table:diameter: 150 mm Table load max.: 25 kg Longitudinal travel (X-axis): 400 mm Transversal travel (y-axis): 200 mm Vertical travel (z axis): 385 mm B axis swivelling range: -110 / +30 ° Table speeds: stepless up to: 4000 rpm Holding torque of the table: 400 Nm Tool changer: Number of tools: 96 Tool diameter max.: 50 mm Tool lenght: 130 mm Max. tool-weight: 1 kg Time of tool changing: 0.8 sec Average chip-to-chip time: 3 sec Spindle nose: HSK: E40 Spindle speeds: stepless up to: 42000 rpm Rapid traverse:: 60 m/min Acceleration: 10 m/s Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle power: 10 / 15 kW Torque max.: 8 / 12 Nm Machine´s w ...
used
MSX-711-MAPPS IV CNC Control Twin pallet changer. Pallet diameter 500 mm. 2-Axis NC Rotary / Swivelling table. B-Axis 0.001° / 360°. A-Axis +30°/-120° - 0.001°. Travels : X 730 mm, Y 850 mm, Z 1100 mm. Feeds / Rapids to 50000 mm/min. Spindle taper HSK-63A. Spindle speeds to 12000 rpm. 120 station tool magazine. Coolant through the spindle. Measuring probe. Tool length measurement. Tool breakage control. etc... Low run hours - Superb condition. ; Super
used
Horizontal fraesing machine with swivel vertical frescent head (3510.3), table 315 x 1000 mm, x/y/z = 710/260/420 mm, Sk 40, speed range 45-2000 rpm, feed range 16-800 mm/min, eilgaenge 4 m/min, weight approx. 1.5 t
used
Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 220 mm Square: 220 mm hydraulic Cut length: min.: 6 mm max: 750 mm Max. automatic forward feed length: 750 mm Cutting speed: stepless from: 18 m/min up to: 110 m/min Band width: 1.3 mm Voltage 50 Hz 3x: 400 Volt Power: 4 kW Machine´s weight about: 1750 kg Overall dimensions machine: Length: 2050 mm Width: 2050 mm Height: 1300 mm Various accessories: Set of saw bands Roller conveyor Coolant system Material stops Workpiece counter
used
Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0 Positions ATC: 0 CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Number of axis total: 4 Longitudinal travel (X-axis): 700 mm Transversal travel (y-axis): 630 mm Vertical travel (z axis): 700 mm Dimension of the workpice: Width: 700 mm Table load max.: 500 kg Table divisions (B): 0.001 ° Table speed: 30 rpm Holding torque A-axis: 4000 Nm Tilting moment: 8000 Nm Pallets: number: 10 Length: 500 mm Width: 500 mm Maximum workpiece weight: 750 kg Time of changing palets: 7 sec Tool changer: Number of tools: 130 Tool diameter max.: 80 mm Diameter with free adjacent pockets: 150 mm Tool lenght: 350 mm Max. tool-weight: 10 kg Time of tool changing: 2.5 - 4.5 sec Average chip-to-chip time: 4 sec Spindle nose SK: 40 DIN69871-A40 Spindle speeds: stepl ...
used
Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0 Positions ATC: 0 CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 31i-Model AB Technical data Table length: 400 mm Table width: 400 mm Table load max.: 400 kg Maximum swing circle of up to: 600 mm Longitudinal travel (X-axis): 650 mm Transversal travel (y-axis): 560 mm Vertical travel (z axis): 560 mm Pallets chanching device: number: 12 Length: 400 mm Width: 400 mm Maximum workpiece weight: 400 kg Transport weight: 100 kg Tool magazine number of tools: 120 Spindle nose: BT: 40 Distance from horizontal spindle to table: 90 - 650 mm Spindle speeds: stepless from: 12 rpm up to: 12000 rpm Work feed rate: 20 m/min Rapid traverse:: 60 m/min Air connect: 6 bar Voltage 50 Hz 3x: 380 Volt Spindle power: 22 kW Total power required: 65 kW Total power required: 380 kVA Machi ...
used
Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0 Positions ATC: 0 CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 27052 Technical data Number of axis total: 4 Number of spindles: 1 Table load max.: 500 kg Longitudinal travel (X-axis): 560 mm Transversal travel (y-axis): 600 mm Vertical travel (z axis): 600 mm Dimension of the workpice: Height: 850 mm Diameter: 630 mm Table divisions (B): 360 ° Resolution: 0.001 ° Table speed: 40 rpm Holding torque of the table: 1580 / 2300 Nm Torque max.: 1550 Nm Pallets chanching device: Length: 400 mm Width: 400 mm Maximum workpiece weight: 500 kg Tool changer: Number of tools: 120 Tool diameter max.: 80 mm Diameter with free adjacent pockets: 160 mm Tool lenght: 400 mm Max. tool-weight: 12 kg Spindle nose: HSK: 63 DIN 69893 Form A Spindle diameter: 225 mm ...
used
Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0 Positions ATC: 0 CNC Brand: 0 CNC Model: 0 Control: GE Fanuc Series 18i-MB5 Operating hours: 34031 Technical data Number of axis total: 3 Number of spindles: 1 Table length: 770 mm Table width: 290 mm Longitudinal travel (X-axis): 450 mm Transversal travel (y-axis): 270 mm Vertical travel (z axis): 310 mm Drill capacity: 12 mm Max. taping diameter M: 8 Tool changer: Number of tools: 24 Tool diameter max.: 47 mm Diameter with free adjacent pockets: 100 mm Tool lenght: 160 mm Max. tool-weight: 1.2 kg Time of tool changing: 0.8 / 2.3 sec Average chip-to-chip time: 2.2 sec Spindle nose: HSK-A: 40 DIN 69893 Spindle speeds: up to: 30000 rpm Rapid traverse:: 75 m/min Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle motor: 7 kW Total power required: 14 kW Various acces ...
used
Little used and is very well maintained, factory No. 3791, in execution with degree - and indirect sharing using disc of part of. Table size 500 mm diameter Height 150 mm Length 710 mm 590 mm width (without drive) T - slot width 16 mm Gear ratio 1: 120 Weight 180 kg Accessories: Part of disc, operating instructions.
used
Horizontal grinding machine ELB, magnet 500/350 mm, table 840/350 mm, mesh. No. 140030676
used
Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0 Positions ATC: 0 CNC Brand: 0 CNC Model: 0 Control: GE FANUC Technical data Longitudinal travel (X-axis): 700 mm Transversal travel (y-axis): 500 mm Vertical travel (z axis): 700 mm Table divisions (B): 360´000x0.001 ° Table speeds: up to: 15 rpm Pallets: number: 9 Length: 500 mm Width: 400 mm Time of changing palets: 14 sec Transport weight: 500 kg Tool changer: Number of tools: 144 (2x72) Max. tool-weight: 12 kg Time of tool changing: 6 - 8 sec Spindle nose: ISO: 45 Horizontal spindle speeds: stepless from: 40 rpm up to: 10000 rpm Feeds: stepless longitudinal from: 1 mm/min up to: 10000 mm/min transversal from: 1 mm/min up to: 10000 mm/min vertical from: 1 mm/min up to: 10000 mm/min Rapid traverse:: 15 m/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 15 kW Total ...
used
Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0 Positions ATC: 0 CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Number of machines: 2 Number of axis total: 5 Longitudinal travel (X-axis): 750 mm Transversal travel (y-axis): 860 mm Vertical travel (z axis): 850 mm Table divisions (B): 0.001 ° Pallets: number: 12 Length: 630 mm Width: 630 mm Tool changer: Tool magazine number of tools: 334 Spindle nose: HSK-A: 100 Spindle speeds: stepless up to: 11000 rpm Feeds: X axis: 32 m/min Y axis: 32 m/min Z axis: 32 m/min Spindle motor: 25 kW Various accessories: FMS system (flexible manufacturing system) Coolant system Chip conveyor
used
Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0 Positions ATC: 0 CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 0 Technical data Number of axis total: 5 Longitudinal travel (X-axis): 3000 mm Transversal travel (y-axis): 2000 mm Vertical travel (z axis): 2000 mm vertical travel (Y-axis): 1720 mm Table divisions (B): 0.001 ° Swivel angle (a-axis): 175 ° Pallets: number: 8 Length: 1250 mm Width: 1250 mm Transport weight: 3000 kg Tool changer: Tool magazine number of tools: 640 Spindle nose: HSK-A: 100 Spindle speeds: stepless up to: 3000 rpm Feeds: X axis: 40 m/min Y axis: 40 m/min Z axis: 30 m/min Spindle motor: 50 kW Various accessories: FMS system (flexible manufacturing system) Coolant system Chip conveyor
used
Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0 Positions ATC: 0 CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 7176 Technical data Number of axis total: 4 Table length: 6400 mm Table width: 1000 mm Table load max.: 1500 kg Longitudinal travel (X-axis): 6000 mm Transversal travel (y-axis): 1000 mm Vertical travel (z axis): 1140 / 1200 mm B axis swivelling range: +/-90 ° Milling head divisions (B): 0.001 ° Tool magazine number of tools: 80 Tool diameter max.: 100 mm Diameter with free adjacent pockets: 180 mm Tool lenght: 400 mm Max. tool-weight: 15 kg Time of tool changing: 6 sec Spindle nose: HSK-A: 100 Spindle speeds: stepless from: 45 rpm up to: 9000 rpm Feeds: longitudinal from: 1 mm/min up to: 9999 mm/min transversal from: 1 mm/min up to: 9999 mm/min vertical from: 1 mm/min up to: ...
used
Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0 Positions ATC: 0 CNC Brand: 0 CNC Model: 0 Control: VISEL VSC 1025 M (2013) Technical data Number of axis total: 5 Table length: 510 mm Table width: 315 mm Longitudinal travel (X-axis): 305 mm Transversal travel (y-axis): 254 mm Vertical travel (z axis): 305 mm up to Tool changer: Number of tools: 12 Time of tool changing: 4 - 5 sec Spindle nose: BT: 30 Spindle speeds: number (steps) stepless from: 300 rpm up to: 8000 rpm Total power required: 8 kW Machine´s weight about: 2900 kg Overall dimensions machine: Length: 2240 mm Width: 1250 mm Height: 2400 mm Various accessories: Set of toolholders: 7 pcs Coolant system Tool setter Renishaw: TS27R Dividing attachment 4th and 5th axis: LEHMANN Type: 410 Oil mist extractor fire extinctor
used
LATHE MORANDO Manufacturer: ITALY Year of manufacture: 1970 Swing over bed 1200mm Turning length: 8 000mm
used
CNC Horizontal Lathe GURUTZPE Manufacturer: Gurutzpe YOM: 1974 retrofit 2010 Control: Siemens Sinumerik 820 Turning diameter: 1.380 mm Distance between centers 5.000 mm Center height: 600 mm Swing over cross slide: 1.100 mm Max workpiece weight: 17.000 Kg The tailstock is in the offer, stamds next to the machine – not visible on the photo
used
CNC Horizontal Milling Machine LAGUN Model G Cosmos 20 Manufacturer: LAGUN Model: G Cosmos 20 New in: 2004 Condition: very good, complete Control: Fagor 8055 Table dimensions: 2000 x 700 mm Distance from table to column: 1217 mm T-slots: 5x18x116 mm Max. workpiece weight: 4000 kg X axis travel: 2000 mm Y axis travel: 800 mm Z axis travel: 1000 mm Spindle taper: ISO 50 Spindle speed: 15 000 rpm Rapid traverse rate: 24 mm/min Main motor power: 17 - 20.5 kW Total power required: 27 kW Machine weight: 10 600 kg Dimensions: 5495x3440x3016 mm
used
Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0 CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 1.5 mm Max. diameter: 165 mm Max. honing length: 406 mm Spindle speeds: number (steps): 12 from: 200 rpm up to: 2500 rpm Stroke speed: number (steps): 5 from: 80 s/min up to: 310 s/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.73 kW Machine´s weight about: 450 kg Overall dimensions machine: Length: 1500 mm Width: 1300 mm Height: 1600 mm Various accessories: Coolant system Automatic workpiece honing unit
used
Honing diameter maximum: 0 mm Honing diameter minimum: 0 mm Stroke length: 0 mm Number of honing heads: 0 CNC Brand: 0 CNC Model: 0 Technical data Min. diameter: 1.5 mm Max. diameter: 165 mm Max. honing length: 406 mm Spindle speeds: number (steps): 12 from: 200 rpm up to: 2500 rpm Total stroke: 80 - 310 mm Stroke speed: number (steps): 5 from: 80 s/min up to: 310 s/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.73 kW Machine´s weight about: 530 kg Overall dimensions machine: Length: 1830 mm Width: 1250 mm Height: 1700 mm Automatic workpiece honing unit
used
Overhaul, retrofit, control conversion of all ELB-Schliff grinders with Granitan machine bed. Available with or without enclosure.
used
Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Operating hours: 54112 Technical data Cut range: round up to: 10 - 260 mm Square: 260 x 260 mm vertical hydraulic Automatic Cut length: min.: 5 mm max: 680 mm Max. automatic forward feed length: 680 mm stepless from: 15 m/min up to: 125 m/min Band length: 4115 mm Band width: 41 mm Sheet thickness: 1.3 mm Voltage 50 Hz 3x: 380 Volt Power: 4 / 6.5 kW Machine´s weight about: 1915 kg Overall dimensions machine: Length: 2125 mm Width: 1930 mm Height: 2100 mm Various accessories: Automatic forward feed Material bearing lenght: 1 m Roller conveyor Coolant system Chip conveyor
used
Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0 Positions ATC: 0 CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 75960 Technical data Number of axis simultaneous: 5 Number of tables: 1 Number of spindles: 1 Table load max.: 800 kg Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 750 mm Vertical travel (z axis): 620 mm Dimension of the workpice: Height: 550 mm Diameter: 500 mm Table divisions (B): 0,001° ° A axis: 145° (+35/-110°) Table speed: 30 rpm Pallets:: System Staflex number: 4 Length: 500 mm Width: 500 mm Transport weight: 200 kg Tool changer: Number of tools: 60 Tool diameter max.: 120 mm Diameter with free adjacent pockets: 200 mm Tool lenght: 400 mm Max. tool-weight: 15 kg Spindle nose:: HSK-A 100 Spindle speeds:: STEP TEC stepless up to: 12000 rpm Torque max ...
used
Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 250 mm Square: 250 mm Execution: Horizontal hydraulic Automatic Cut length: min.: 3 mm max: 2 X 400 mm Cutting speed: stepless from: 14 m/min up to: 116 m/min Roll diameter: 460 mm Band length: 4100 mm Voltage 50 Hz 3x: 380 Volt Power: 4.00 kW Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1700 mm Width: 1500 mm Height: 1350 mm Various accessories: Coolant system
used
Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg
used
Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 410 mm Square: 410 mm hydraulic Automatic Cutting speed: stepless from: 10 m/min up to: 100 m/min Table inclination right side: 60 ° Roll diameter: 450 mm Band length: 5300 mm Band width: 34 mm Sheet thickness: 1.1 mm Vice pressure max.: 3 - 25 bar Voltage 50 Hz 3x: 380 Volt Saw motor driving power: 2.2 kW Machine´s weight about: 2300 kg Overall dimensions machine: Length: 3250 mm Width: 1910 mm Height: 2100 mm
used
Many thanks for your interest on our second hand machines, please find follow our offer: Manufacturer : SIG Type : SB horizontal flow-pack YOM : 1988 Package size range : min. 60 x 30 x 5 mm (lxbxh) max. 410 x 180 x 75 mm (lxbxh) Trigger length : between 90 and 470 mm depending on the format range Roll width : up to 590 mm Output : up to 250 pcs./minute; infinitely adjustable Electricity : 220-380 V; 3 ph; 50 Hz supply chain length : ca. 5000 mm different: double foil roll holder automatic film splicer PLC Control date printer good Condition 5m long belt infeed We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked
used
Technical data Table length: 400 mm Table width: 200 mm Grinding length: 400 mm Grinding width: 200 mm Execution: hydraulic Max. distance from table to spindle-centreline: 400 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y axis): 200 mm Vertical travel (z axis): 300 mm Table speeds: stepless from: 1 m/min up to: 25 m/min Diameter of grinding wheel: 250 mm Width of the grinding wheel: 25 mm Grinding wheel speeds: number (steps): 2 from: 1300 rpm up to: 2600 rpm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 1250 kg Overall dimensions machine: Length: 1900 mm Width: 1300 mm Height: 2000 mm Various accessories: Coolant system Electrical magnetic chuck Length: 450 mm Width: 200 mm Wheel trueing attachment Set of flanges Central lubrification Automatic forward feed Automatic feed