horizontal milling center used for sale

CONTROLS   CNC controls HEIDENHAIN ITNC 620 WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 3   .. among of them simultaneous CNC axes: 3   X-axis travel: 1000 mm   Y-axis travel: 550 mm   Z-axis travel: 550 mm TABLE   table surface (left-right): 1100 mm   table surface (front-back): 550 mm   workpiece load (max): 800 kg SPINDLE / HEAD   spindle type: vertical   spindle revolutions (max): 10000 /min   tool fixture: ISO SK 40   drive power: 13.5 kW AXIS DRIVES   feed velocity (max): 10000 mm/min   rapid traverse X: 36000 mm/min   rapid traverse Y: 36000 mm/min   rapid traverse Z: 36000 mm/min TOOL MAGAZINE   magazin type: disc magazine   number of positions: 30   tool diameter max.: 76 mm   tool length max.: 250 mm   tool weight max.: 6 kg ELECTRICAL SPECIFICATIONS   mains power supply: 15 kVA DIMENSIONS / WEIGHTS  ...

CONTROLS   CNC controls HEIDENHAIN I TNC 530 WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 4   X-axis travel: 540 mm   Y-axis travel: 540 mm   Z-axis travel: 560 mm TABLE   table surface (left-right): 700 mm   table surface (front-back): 520 mm SPINDLE / HEAD   spindle revolutions (max): 8000 /min   tool fixture: ISO SK 40 AXIS DRIVES   feed velocity (max): 20000 mm/min   rapid traverse: 30000 mm/min TOOL MAGAZINE   number of positions: 21   tool diameter max.: 80 mm   - with free neighbour positions: 160 mm   tool length max.: 385 mm   tool weight max.: 6.8 kg ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3000 mm   space requirements -front/back-: 2600 mm   total height: 2700 mm   total weight approx.: 4200 kg Extras: - 4th axis - ...

To mediate on behalf of the customer. Used machine Machine Type: CNC Double Turning Center Model: EMCO TURN 420MCplus Manufacturer: EMCO Control: Siemens 840D First commissioning: 2005 #009338 Location: Poland Control Siemens 840D Turning length 120 mm Turning diameter100 mm Number of axes 2x3 Spindle speed 5000 rpm The above information was provided to us by the seller and must be checked during inspection. This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

CONTROLS   CNC controls SIEMENS SOLUTION LINE WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 3   X-axis travel: 600 mm   Y-axis travel: 560 mm   Z-axis travel: 510 mm TABLE   table surface (left-right): 900 mm   table surface (front-back): 560 mm   workpiece load (max): 600 kg SPINDLE / HEAD   spindle revolutions (min): 20 /min   spindle revolutions (max): 12000 /min   tool fixture: ISO SK 40   drive power S6 40%: 13 kW   drive power S1 100%: 9 kW   spindle torque S6 40%: 82 Nm   spindle torque S1 100%: 54 Nm AXIS DRIVES   traverse velocity X (max): 20000 mm/min   traverse velocity Y (max): 20000 mm/min   traverse velocity Z (max): 20000 mm/min   rapid traverse X: 30000 mm/min   rapid traverse Y: 30000 mm/min   rapid traverse Z: 30000 mm/min TOOL MAGAZINE   number of positions: 30   tool diameter max.: 80 mm   -  ...

A double-turret and double-spindle turning center Biglia including peripherals is available. Spindle power: 11kW/11kW, speed: 7000rpm, bar capacity: 36mm-37.5mm, max. turning diameter: 100mm, max. turning length: 140mm, tool stations: 2×12, Y-axis travel: +/-25mm, X/Z-axis travel: 85mm/300mm, rapid traverse: 15m/min, machine dimensions X/Y/Z: approx. 3700mm/1450mm/1900mm, weight: approx. 5000kg, control: Mitsubishi M730 with editor, power-on hours: approx. 47000h. Including FMB turbo 3-36 bar loader, Knoll KF10 coolant system, 700l tank, air cleaning unit and an extensive package of collets and tools. Documentation available. An on-site inspection is possible. Expected to be available starting October 2026.

OKUMA LB 300 M CNC turning center was built in 2006 in Japan by OKUMA Corporation. The machine, designed for even the most demanding production challenges, is an excellent choice for both unit and series production. Its extensive machining capabilities enable a wide range of complex operations, such as turning or threading, to be realised with the highest accuracy and repeatability. The workspace of the OKUMA LB 300 M machine has been fully maximised in relation to its compact dimensions in order to ensure complete freedom of operation. It features, among others, an inclined bed, a reliable spindle and a 12-position turret. The spindle, driven by a high-powered motor, reaches a maximum speed of 4500 rpm and moves in two X,Z axes with feeds of 260 mm and 520 mm respectively. All cutting tools are stored in a 12-position turret, which offers fast and reliable operation. Precise position ...

Cargo space 230cm high; distance center to rear of vehicle 584cm; wheelbase 46cm; number of owners private/business ; 1/0 Auction-ID: A1-42015-86

A CNC vertical machining center Spinner is available. Travel X/Y/Z: 650mm/450mm/460mm, table dimensions X/Y: 710mm/450mm, max. table load: 500kg, speed: 8000rpm, tool holder: SK40, tool positions: 24, rapid traverse: 24m/min, feed: 10m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 2400mm/2100mm/2600mm, weight: approx. 9500kg, control: Fanuc. Without vise and dividing head. The spindle was recently renewed and the hydraulic pump is currently being renewed. The rotary table is leaking oil. Documentation available. An on-site inspection is possible.

Heavy duty distribution pannels in very good shape,turbine control pannnels etc.

Travel X/Y/Z: 1600mm/400mm/350mm, quill stroke: 350mm, max. workpiece weight: 2100kg, table dimensions X/Y: 2100mm/430mm, table height: 908mm, tool positions: 78, tool holder: SK40, max. torque: 70Nm, rapid traverse: 30m/min, feed force: 7kN. Machine dimensions X/Y/Z: approx. 4700mm/2950mm/2700mm, weight: approx. 9300kg, control: Siemens 840C. The spindle of the machine must be overhauled and was removed as well. Documentation available. An on-site inspection is possible.

\" Lot of centering drills / drills from workshop stock. Marking / Contents: • Quantity: 36 pieces • Mixed versions: • Center drill / combination drill • Various diameters and lengths Weight • Net weight: 14 kg \" Auction-ID: A7-46417-192

\" Lot of centering drills / drills from workshop stock. Manufacturer / Identification: • WERKÖ • Mixed Lot Center Drill / Combination Drill • Various: • Diameters • Lengths • Tip geometries Weight • Net weight: 16 kg \" Auction-ID: A7-46417-190

CNC - processing center Brand: COMEC Type: MD TOP The ideal CNC solution to process narrow and complicated work pieces EASY with COMEC processing length up to 2.000 mm Head configuration individually customizable for: - saw with 360° - axis - milling unit for horizontal and vertical processing - drilling head with separate jumping spindles vertical and horizontal - multiple spindle drilling heads separate jumping even horizontal - horizontal milling unit with 360° C - axis Special developed clamping table, moves automatically program controlled in X direction Furthermore, optionally available: - Automatic raw work piece feed with finished work piece return to the operator TPA control unit: CNC control with graphical user interface Parametric software with 3D modeling Necessary processing macros customized to you pre-installed

This 3-axis BIESSE Rover 24S was manufactured in 2002. It features a length of 3390 mm and an overall width of 1500 mm, with a conveyor speed ranging from 28 to 140 m/min. The machine has a weight of 710 kg and is equipped with a powerful 1.1 kW motor. If you are looking to get high-quality CNC processing capabilities, consider the BIESSE Rover 24S machine we have for sale. Contact us for further details.

CONTROLS   CNC controls OKUMA OSP-P300MA WORKING RANGE -CUBIC-   X-axis travel: 560 mm   Y-axis travel: 560 mm   Z-axis travel: 625 mm SPINDLE / HEAD   spindle revolutions (max): 15000 /min X/Z SLIDE   number of tool positions (total): 12   number of live positions: 12   - rotation speeds (max): 5000 /min   - drive power: 5.5 kW TOOL MAGAZINE   number of positions: 146 AUTOMATIC WORKLOAD EQUIPMENT   number of store positions: 2   Workpiece diameter max.: 600 mm   worpiece length max.: 900 mm   pallet length: 400 mm   pallet width: 400 mm   number of pallets: 2 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENTS   chip conveyor: yes   coolant unit: yes   through spindle coolant attachment: yes   closed cabin: yes   European CE standards: yes

The machine is in good technical condition, after prior agreement it is possible to test it. Only 600 mth of mileage! Table size 1300X700mm, X-1220, Y-710, Z- 630mm, machine power 37kw, spindle speed 60-10000rpm, machine weight 9500Kg, control system Heidenhain TNC 640, tool magazine 24 positions.

Turning diameter: 430mm, max. swing diameter over bed: 760mm, max. turning length: 860mm, center distance: 990mm, travel X/Y: 280mm/860mm, speed: 3400rpm, chuck diameter: 12inch, tool stations: 12. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/1900mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible.

Inv. Num. : 9105 Type: MIKRON VCE 800 PRO Producer: Agie Charmilles Created: 2011 Parameters: Control system: HEIDENHAIN iTNC 530 Work table length: 910 mm Work table width: 500 mm Maximum table load (uniform): 1100 kg Maximum vertical spindle speed: 10000 1/min X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 540 mm Machine weight: 5000 kg

This 4-axis Felder Format4 H100 CNC processing center was manufactured in 2025. It features a spacious table size of 3100 x 2100 mm and includes a 16-position linear tool changer, 12 vertical drilling spindles, and a groove saw. If you are looking to get high-quality CNC machining capabilities, consider the Felder Format4 H100 machine we have for sale. Contact us for further details.

This 3-axis VITAP Point K2 TOP 2.0 was manufactured in 2018. It features continuous machining with a maximum workpiece weight of 80 kg and dimensions of Y 1200 mm and Z 50 mm. The machine includes an automatic 4-station tool changer and a dual “0” reference laser for precise positioning. If you are looking to get high-quality CNC processing capabilities, consider the VITAP Point K2 TOP 2.0 machine we have for sale. Contact us for further details.

A conventional center lathe is available. An on-site inspection is possible.

A Fehlmann CNC machining center that was used in the ceramics industry is available. Travel X/Y/Z: 700mm/420mm/610mm, speed: 20000rpm, tool holder: SK30, tool positions: 48, spindle power: 9kW, torque: 70Nm, table dimensions X/Y: 1260mm/490mm, weight: approx. 5200kg, control: Heidenhain TNC 430M. The C key has a fault on the ATS swivel apparatus regarding the amplitude. The ball screws of the X and Y axes were recently replaced. Without extraction system. Documentation available. An on-site inspection is possible.

Control: Heidenhain MillPlus, NC software: 400.00, connected load: 29kVA, length: 3100mm, width: 2400mm, height: 2450mm, weight: 5.7t. Operating hours: 50,213h, spindle hours: 9,297h. Machine is not functional, the control does not start up, cause is a defective system rack and two defective IOB80 boards. An on-site inspection is possible.

A CNC vertical machining center Emco is available. Travel X/Y/Z: 420mm/330mm/400mm, table dimensions X/Y: 650mm/320mm, max. table load: 150kg, tool positions: 12, tool holder: SK40, speed: 4500rpm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2400mm/2300mm/2450mm, weight: approx. 2750kg, control: Emcotronic TM02. An on-site inspection is possible.

MAHO M800 CNC Milling Machine Manufacturer: MAHO Model: M800 Type: Vertical CNC Milling Machine with Rotary Table Condition: Used – working overall condition, but uncleaned, with no known malfunctions Year: Not known (estimated: late 1980s – early 1990s) Technical data (as far as known): • Travels: X ≈ 500 mm / Y ≈ 400 mm / Z ≈ 400 mm (estimated, please check) • Rotary table with T-slots • Spindle mount: ISO or SK (please check exact standard) • Control via separate control panel • Coolant connection available • Doors with viewing windows (safety glazing) Auction-ID: 038-WFX-6

According to photos, spindle defective With turntable, tool changer available Auction-ID: A1-45666-24

According to photos, weight estimated. Tools included in the stacks 2 inverters are defective Auction-ID: A1-45666-18

Control MITSUBISHI M 700 Bar Passage 37.5 mm 2 x 12-speed revolver with attached revolver Wkz. 2 x C-axis 2 x Y-axis Main/sub-spindle FMB Bar Loading Magazine turbo 3-36 Knoll Coolant Preparation KF 10 Chip conveyor Renishaw Probes Parts catcher Conveyor belt for precast elements Air filter 2 x Collet Chuck Tool holders and collets

BAZ Johnford FMC 850 for sale The machine is built in 1999 and can be viewed under chipboard. Enclosed is a type picture of the machine! Available in mid-June!

-Flexible CNC plate machining center -The machine consists of two processing units (top, bottom) -Equipped with a total of 82 individually retrievable tools -The skipper is able to process two workpieces at the same time from above and below -Dimensions according to data sheet -Work and pressure table -Side work tables -Stop system -Electronic control of workpiece thickness -Digital drives -Central lubrication -Control -Automatic discharge with belt -Air cushion table -Bottom processing unit-Left slot -Upper processing unit-Left slot -Bottom processing unit-Right slot -Upper processing unit-Right slot -Horizontal glue dowel insertion unit for dowels with 8 mm diameter -Surveying system - NC-HOPS programming system -Version with left-hand automatic feed feed -Horizontal drilling and milling Auction-ID: A7-46409-13

\" (2x) Centering angle 300 mm – Precision marking angle Centering angle with 300 mm leg length for the exact determination of centers on round workpieces (e.g. shafts, tubes, discs). • Design: Centering angle • Length: 300 mm • Condition: new / unused • Accessories: protective bag • Marking: Centering angle 300 mm / 301-73 • Material: Metal, precisely manufactured • Application: Centering, scribing, testing \" Auction-ID: A7-46417-256

Tool holders and clamping adapters for BAZ special tool holders and clamping adapters for machining centres of the STAMA-MC series (including MC 440). Stock: Mixed lot with approx. several tool holders, chucks, reducers and spindle adapters. Typical designs include: STAMA special adapter with bayonet/form-fit contour Chuck with slotted clamping heads Reduction adapter for STAMA unit interfaces Mounting elements for special tools Tool carrier with STAMA logo and part numbers (including 150 864 / 150 865) Auction-ID: A7-46417-30

CNC working center Brand: Comec Type: Variax J new machine The highest level of progress for your door frame production: 6 controlled axes and a fast production process characterize the Variax J. Movable machining support - All axes move on ball bearing mounted BOSCH-REXROTH or comparable linear guides - Movement / positioning of the machining units max. 70 m/min. - Axis X = 2950 mm - Axis Y = 400 mm - Axis Z = 500 mm - Axis support for vertical rotation of the machining head. axis B from -135° to +135°, motor kW 0.45. - Axis support for horizontal rotation of the machining head. Axis C from -180° to +180°, motor kW 0.45. Machining head - electrospindle 1-2 - N°1+1 electrospindle fixed to the H support - N°1 electrospindle for milling, - with 2 spindle outputs, kW 7.0 / 12-18.000 rpm, adjustable by means of frequency converter Tool attachment wit ...

CNC processing center manufactured in 1997. This WEINIG / DIMTER Unicontrol 10 features a maximum workpiece length of 3,600 mm and a maximum workpiece height of 100 mm. It includes a powerful cross-cut saw with a spindle speed of up to 3,000 rpm and a tenoning spindle motor power of 15 kW. If you are looking to get high-quality CNC processing capabilities, consider the WEINIG / DIMTER Unicontrol 10 machine we have for sale. Contact us for further details.

Centering Machine - Speed 1390rpm - Power: 0.55KW - Connection voltage 380Volt - Centrically clamping vice - Collet holder - Base frame Auction-ID: A7-46460-441

CNC Machining Center Vertical - 30-fold tool changer - Handwheel - Chip conveyors - Belt filter system - some SK40 tool holders System can be dismantled to 2.45m. x-travel 2000 mm y-travel: 620 mm z-travel 520 mm Control Heidenhain TNC CNC Speed range - main spindle max. 15000 rpm/-1 Tool holder BT 40 Table clamping surface: 2500 x 550 mm Tool changing device 30-fold Connected load 25 KVA Weight 10.5 t Dimensions LxWxH 8.0 x 2.6 x 2.75 m Auction-ID: A7-46460-415

The machine is in good technical condition, after prior agreement it is possible to test it. CONTROL SYSTEM Control language - completely in Czech 3D simulation - yes Programming type - Dialogue and NC TABLE Table dimensions - 1,270 x 610 mm T-slots - 5 x 18 mm Max. table load - 1,350 kg Distance between the spindle face and the table - 150 - 760 mm TRAVELS X-axis - 1,070 mm Y-axis - 610 mm Z-axis - 610 mm SPINDLE Max. spindle speed - 12,000 rpm Spindle taper - SK40 TOOL MAGAZINE Number of tools - 24 Max. tool diameter - 80 mm Max. tool weight - 7 kg

The machine is in good technical condition, after prior agreement it is possible to test it. 0 Baumuller ball screws, spindle diameter 60 mm, SK 40, power 5.5kw/11 kW, torque 100Nm. Rotary tool changer 12. 3 axes and 4th axis only control board without 4th axis table..

Control Mitsubishi 64S Travel Distances X/Y/Z 600 x 400 x 460 mm Table size 700 x 410 mm Table load 250 kg Spindle speed 12,000 min-1 Tool magazine for 24 Wkz. BT 40 IKZ 20 bar Suction Chip conveyor

Machine type: CNC Vertical Machining Center Manufacturer: Tongtai Model: TMV-720A Control: Heidenhain CNC control Year: n/a Serial number: n/a Working hours: n/a Table size: approx. 900 x 400 mm Spindle: Vertical spindle Tool holder: SK40 (visual assumption) Tool changer: Yes, side-mounted tool rack Number of tool holders: approx. 20+ pcs included Coolant system: Yes, internal coolant nozzles Chip management: Chip conveyor installed Coolant unit: External filtration unit (Granch Filtration) Control panel: Heidenhain with manual pulse generator (MPG) Emergency stop: Yes Status light: Yes Accessories: Tool holders, coolant system, filtration unit Remarks: Machine in used condition, signs of wear and coolant residues visible. Control boots and initializes. Includes multiple tool holders and external coolant filtration system. Own mass: approx. 5 ...

! PAY ATTENTION Delivered without the ENERPAC hydraulic unit and the 2Hydraulic clamps Tool holder: BT 40 JIS B 6339 (MAS 403 BT) - [ISO 7388-2] Possibility for 20 Tools, comes without tool(holders) Auction-ID: A1-41995-142

Make: Big-Plus (Taiwan) Type: CNC Vertical Machining Center Model: 850 VMC Serial number: BM110CE01 Control: FANUC Series 0i-MD Technical data: - X / Y / Z travel: approx. 850 mm / 500 mm / 500 mm - Table size: approx. 1000 x 500 mm - Spindle speed: 10,000 rpm - Main voltage: 415 V AC - Power requirement: 20 kVA - Air required: approx. 6–8 kg/cm² Equipment: - Vertical spindle (Big-Plus spindle system) - Tool changer (carousel type) - Coolant system - Enclosed working area with sliding door - Manual pulse generator (handwheel) Control panel: - FANUC interface with display and full keyboard - Feed / rapid / spindle override controls - Emergency stop and cycle controls Condition: Used Auction-ID: A7-45993-49

Make: Dahlih Type: Vertical Machining Center (VMC) Model: DL-MCV1200 Year: 2010 Control: Heidenhain CNC control Technical data: - X-axis travel: approx. 1,200 mm - Y-axis travel: approx. 600 mm - Z-axis travel: approx. 600 mm - Table size: approx. 1,300 x 600 mm - Spindle speed: up to approx. 8,000–10,000 rpm (typical for model) - Power: 12 kVA (according to plate) Equipment: - Fully enclosed machining cabin with double doors - Heidenhain control panel with screen & keyboard - Electronic handwheel - Tool holders rack (side mounted) - Chip conveyor - Coolant system - Working light Application: - CNC milling and machining of metal components - Toolmaking and precision part production Condition: Used Auction-ID: A7-45993-42

Make: Dugard Type: CNC Vertical Machining Center Model: Eagle 1000 VMC Serial number: MC97BF06 Control: FANUC Series 0i-MC Technical data: - X / Y / Z travel: approx. 1000 mm / 500 mm / 500 mm (typical for model class) - Spindle speed: 8000 rpm - Main voltage: 415 V AC - Power requirement: 20 kVA - Air required: 5–6 kg/cm² Equipment: - Vertical spindle - Tool holders included (side mounted rack) - Coolant system - Manual pulse generator (handwheel) - Enclosed working area with sliding door Control panel: - Full FANUC keyboard and display - Feed / rapid / spindle override controls - Emergency stop and cycle controls Condition: Used Auction-ID: A7-45993-48

Type: CNC Vertical Machining Center Brand: EMSIL Techtrans Model: DMC2100H Control: FANUC Series 18i-MB Machine Type: Super Vertical Machining Center Axes: 3-axis (X / Y / Z) Equipment: - Enclosed working area with sliding doors - Large T-slot worktable - Automatic tool interface (tool holder included) - CNC control panel with screen and full keypad - Emergency stop - Coolant system with adjustable nozzles - Electrical cabinet integrated - Status signal tower (stack light) Displayed Data (at time of inspection): Run time: approx. 19,568 h Part count: 84,933 Condition: Used Remarks: Alarm displayed (pressure low); machine not tested; sold as seen Auction-ID: A7-45993-78

Matsuura MAM72-25V 5-axle Tool holder: BT 40 JIS B 6339 (MAS 403 BT) - [ISO 7388-2] Possibility for 180 tools, comes without tool(holders) Steering system: Fanuc Series 30i Year of construction: 2004 In combination with BMO: including 0-point tensioning system with 1 pneumatic Schunk clamp Power on: 99,802 hours Run time: 53,875 hours Cutting time: 27,631 hours Diameter ø250 Spindle : 12,000 rpm Internal cooling from the spindle Includes Renishaw probe (type: OMP60) BMO Titanium 50 Automation Robot: Yaskawa DX200 Year of construction 2016 The BMO leaves with 1 zero point clamping system and 1 long clamp Dimensions BMO 2600 x 4700 x 2700 mm. including PC10 automation that has not been used. Auction-ID: A1-41995-140

Make: Dahlih Type: Vertical Machining Center (VMC) Model: DL-MCV720 (720MCV) Year: 2006 Control: Heidenhain CNC control Technical data: - X-axis travel: approx. 720 mm - Y-axis travel: approx. 400 mm - Z-axis travel: approx. 450 mm - Table size: approx. 900 x 400 mm - Spindle speed: up to 15,000 rpm (according to plate) Equipment: - Enclosed working area with sliding door - CNC control panel with keyboard & display - Coolant system - Chip conveyor - Work light Application: - CNC milling operations for metal parts - Precision machining in toolmaking and production Condition: Used Auction-ID: A7-45993-41

DMG MORI CL2000A CNC turning center was built in 2017 in Japan by DMG MORI CO., LTD. The machine is new and has never been used. The DMG MORI CL2000A is an excellent choice for the production of high-precision and repeatable parts used in many industrial sectors. This compact yet extremely powerful lathe will excel in even the most demanding production challenges. All machining processes, i.e. precision turning or threading, are performed fully automatically by means of the spindle and the cutting tools, taken from a 10-position turret. The spindle, driven by a high-powered motor, rotates at a maximum speed of 4500 rpm and operates in two X,Z axes with feeds of 245 mm and 370 mm respectively. What’s more, the machine’s design is based on the Finite Element Method (FEM). This solution guarantees the maintenance of high geometrical accuracy of the design, even under heavy loads.  ...

Tool changer: 32 places IKZ 22 bar + belt filter system Chip conveyor Auction-ID: A1-46607-10