horizontal milling center used for sale

Tool holder, milling holder, milling tool -Number: 7x SK40 mounts with tool carrier -Executions: different -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills -Sale: only complete -Dimensions: 590/120/H210 mm -Weight: 12 kg

ORDER NO. 6623 TECHNICAL DATA - diameter range of machined pins 200mm - min length of input material 1100mm - infinitely variable feed speed + front/rear - knife head drive motor 15kW - feed motor 1,7kW Successively: - 2 toothed pulling shafts - 4-knife head - 2 smooth pulling pin shafts - electrically adjustable knife head - electrically adjustable shafts - dimensions length / width / height 3570x1300x1700mm - weight about 4000kg ADVANTAGES – German production - the possibility of turning poles into a cone – used turner, very good condition Net price: 159900 PLN Net price: 35533 EUR depending on the price 4,50 EUR (Prices may fluctuate with higher fluctuations)

Counter bearing, bearing block, pillow block, bearing for milling machine, upper support -Dovetail: 11 by 94 mm 16 mm high -Drawing: in the photos -Dimensions: 730/160/H110 mm -Weight: 28 kg

Table clamping surface: 300 x 1100 mm Travel x: 780 mm Travel y: 250 mm Travel z: 410 mm Cbgaxkvf39 Spindle holder: SK 40 Pinole stroke: 100 mm Spindle speeds: 31.5 - 1400 rpm Feeds longitudinally and transversely: 12.5 - 630 mm/min Feeds vertical: 6.3 - 315 mm/min electr. Connection: 380 V, 5.5 kW Space requirement: 1770 x 1500 x 2050 mm Weight: approx. 2200 kg

small handy machine from Swabia

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Leuco DIA wood router: 200X12/SB11X30 -Speed: 3800 - 6500 rpm -DP222145-80261567 -with: box -Dimensions: 305/305/H40 mm -Weight: 2.7 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Leuco DIA wood router: 200x10/SB9x30 -Speed: 3800 - 6500 rpm -DP222145-80261568 -with: box -Dimensions: 300/300/H80 mm -Weight: 4.1 kg

TABLE 500 X 800 ISO 40 CNC1600

Agritec floor reversing milling machine UKO 40-120, for PTO 540 rpm, power requirement 18.5-45 kw (25-60 hp) Three-point attachment frame Cat.1, working width 115 cm, total width 142 cm, lateral displacement hydraulic 26 cm, this also allows use on walls, fences, etc. Equipment with trailing grid roller for perfect seedbed preparation. Weight approx. 412 kg. Incl. cardan shaft with friction clutch. 30 knives - all new, ready for operation, incl. cardan shaft with friction clutch. Further reversing milling machine 130 cm working width in stock as well as conventional tillers from 100 to 150 cm, ploughs, cultivators etc.

Double end profiler, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 7.5 kW -Speed: 2860 rpm -Voltage: 380 V -Shaft holder: Ø 40/80 mm -Price: per piece -Number: 2 pieces -Dimensions: 675/250/H255 mm -Weight: 98 kg

Machine Details Warehouse number 1105-03692 Machine type Milling machine - Universal HERMLE brand Type fp 1000 Year of construction 1988 Control type CNC Control heidenhain 355 Storage location HAGUENAU Country of origin Germany Delivery time IMMEDIATELY Freight base EXW Technical details x-travel 700 mm y-travel 630 mm z-travel 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping surface: 1000 x 490 mm Spindle speed gear stage 1 25 - 400 1/min. Spindle speed gear stage 2 401 - 1260 1/min. Spindle speed gear stage 3 1261 - 4200 1/min. Feed 5 m/min Rapid traverse 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with coolant device Sale without clamping devices

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 70 by 98 mm -Bore: Ø 41.3 mm -Dimensions: 155/90/H150 mm -Weight: 6.8 kg

Radial drilling machine used for drilling and milling Manufacturer: COLLET & ENGELHARD GmbH Type: BUV 1600 Year of construction: 1976 horizontally and vertically swivelling head Drilling capacity: 50 mm Travel arm: approx. 800 mm max column travel: 1000 mm Speed: 14 to 710 rpm Spindle stroke approx. 300 mm 380 V Dimensions: approx. 2600 x 1300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 70 by 98 mm -Bore: Ø 45 mm -Dimensions: 155/90/H150 mm -Weight: 6.3 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 110 by 135 mm -Drawing: in the photos -Dimensions: 210/90/H220 mm -Weight: 8.6 kg

MAHO C Axis Machine Table - Table diameter: 600 mm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

CME FCM 9000 Bed milling machine 5-axis Table size 9500 x 1200 mm. Travel X-axis 9000 mm. Y-axis 1500 mm. Z-axis 1500 mm. Maximum table load 5000 kg/ Mtr. Vertical milling head can be swivelled by 1°x1° CNC control Heidenhain TNC 430 CB If you have any questions about the machine, as well as a scheduling for viewing, please contact us by phone or e-mail.

Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Circular saw motor in: flat design -Motor: 1.85 kW 2870 rpm at 50 Hz -Shaft holder: Ø 30 mm -Number: 2x motors available -Price: per piece -Dimensions: 390/120/H185 mm -Weight: 15 kg

Edge milling machine, edge milling device, chamfering machine, mobile milling machine, weld edge former, weld edge former, weld preparation, weld edge forming machine, deburring device, deburring machine -Edge milling: 0 - 3 mm -Drive: 0.45 kW -Angle: adjustable -Dimensions: 485/345/H250 mm -Weight: 18.2 kg

Tool holder, milling holder, milling tool -Number: 3x SK40 holders -various: versions -Sale: only complete -Weight: 6 kg

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -1x holder: Ø 27x 85 mm -1x holder: Ø 70 x 220 mm -Sale: only complete -Weight: 18 kg

Tool holder, milling holder, milling tool -Adjustment: SK50 -Recording inside: Ø 28 mm -Weight: 2.9 kg/piece

CNC-Universal milling machine MAHO MH700 C Table: 900 x 500 mm Travels: -X: 700 mm -Y: 500 mm -Z: 450 mm Spindle stroke: 100 mm Spindle taper: ISO 40 Spindle speed range: 20 - 3150 rpm Total power need: 40 kva Control: Maho / Philips CNC 432 Machine weight: 3,3 tn

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 278 by 218 mm 38 mm high -Drawing: in the photos -Dimensions: 450/95/H295 mm -Weight: 13 kg

DECKEL FP2 NC Dialog 11 Universal Milling Machine Milling Machine Travel X/300 Y/300 Z400 mm (340 mm for universal table in Z-axis) Speed infinitely variable 31.5 ... 5000 rpm Feeds 2-4000 rpm Rapid traverse 4000m/min Tool holder SK 40 Pinole stroke 80 mm Machine weight 1345 kg Main drive 5.5 kW Power consumption 11 kW The machine is currently being revised.

Type: Univer FC 100 Power: 1.2 kW Power supply: 380 Volt Current consumption: 3 A Weight ca: 125 kg Directly from the customer used from November from CH-Pratteln available.

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Swallowtail: 145 by 185 mm high -Drawing: in the photos -Number: 1x counter bearing available -Price: per piece -Dimensions: 290/90/H210 mm -Weight: 14 kg

Counter holder, counter bearing, bearing block, pillow block bearing, bearing for milling machine -Swallowtail: 102 by 126 mm by 20 mm high -Drawing: in the photos -Number: 1x counter bearing available -Price: per piece -Dimensions: 180/70/H140 mm -Weight: 6.9 kg

Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 315 by 255 mm 40 mm high -Drawing: in the photos -Number: 2x counter bearings available -Price: per piece -Dimensions: 560/200/H285 mm -Weight: 20 kg

Jig boring/Milling machine HAUSER 3DR Travel X: 400 mm Travel Y: 200 mm Travel Z: 400 mm Spindle: 2 speeds Cone:CM2 Spindle exit: 120 mm 2 speed ranges 60-1500 RPM / 1500-3000 RPM Table size: L 590 mm x W 320 mm Speed variator at the spindle 2 advances Auto descent: 0,03 mm/min - 0,06 mm/min X-axis functional with Mitutoyo devise Y and Z axis: defective scale Voltage: 380 V Width: 1500 mm Depth: 1700 mm Height in low position: 1800 mm Weight: approx 1,5 T

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 265 by 215 mm, 30 mm high -Drawing: in the photos -Number: 2x counter bearings available -Price: per piece -Dimensions: 390/130/H260 mm -Weight: 30 kg

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 275 by 220 mm, 40 mm high -Drawing: in the photos -Quantity: 1x counter bearing available -Price: per piece -Dimensions: 450/110/H300 mm -Weight: 12 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 15 mm -Tool: Ø 160 x 3.5 mm -Dimensions: 200/85/H70 mm -Weight: 2.5 kg

Tool holder, milling holder, milling tool -Number: 8x SK40 holders -1x: Tapping chuck, compensating chuck -35: Mount MK2, compensating chuck -suitable for: tool changer -Sale: only complete -Weight: 58 kg

bore capacity in steel (diameter): 25 mm throat: 175 mm bore stroke: 50 mm : 16 mm spindle taper: ISO 30 spindle turning speed range: 50 - 3000 U/min : 380 mm : 175 mm table surface area: 700 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,75 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° spindle protection. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Drawers: 2 -Storage: 1 -Brackets for: SK40/SK50 milling holders -Dimensions: 660/1030/H1200 mm -Weight: 190 kg

Tool holder, milling tool holder -Recording: SK50 -Recording tool: MK4 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 6 recordings available -Price: per piece -Dimensions: 240/95/H95 mm -Weight: 3.0 kg/piece

bore capacity in steel (diameter): 30 mm throat: 200 mm bore stroke: 70 mm : 16 mm spindle taper: MK3 spindle turning speed range: 50 - 3000 U/min : 565 mm : 220 mm table surface area: 840 x 210 mm connected load frequency: 400 V max. distance between table and spindle-nose: max. 470 mm total power requirement: 1,1 kW weight of the machine ca.: 230 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,3 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. spindle protection. Machine stand. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

NC Rotary Table Brand FIBRO, type 11.13.6.15.5.11.11.4.0120 T2 Diameter 800 mm Height: 240mm The indicated retail price is net.

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 75 to 90 mm, 15 mm high -Bore: Ø 55 mm -Drawing with the photos -Dimensions: 130/70/H150 mm -Weight: 10 kg

Tool holder, milling holder, milling tool -Number: 4x holder SK40 -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 5 kg

Tool holder, milling tool holder -Number: 6x SK50 recording -various versions -Ø 56 x 110 mm -Ø 46 x 130 mm -Ø 52 x 90 mm -Ø 42 x 80 mm -Ø 42 x 55 mm -Ø 32 x 60 mm -End milling cutter -Price/Sale: complete -Total weight: 24 kg

HOFLER HF 2000L hobber/gasher with both internal/external heads Year: 2013 Installed in 2020 Less that 200 working hours Table diameter: 1500mm Table loading: 18000kg Working stroke (external hobbing): 1760mm Working range above table (external hobbing): 150-1910mm Working range above table (internal hobbing): 250-1460mm Counter support-end face above table: 800-2300mm External toothing, Max: 2000mm Internal toothing, Max: 2400mm CNC control: Siemens 840D Complete weight: 61000kg Equipped with counter support

Tool holder, milling tool holder -Number: 13x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -only sold as a complete set -Weight: 54 kg

Tool holder, milling tool holder -Adapter -Recording: SK50 -Recording tool: 2x MK3 1x MK2 -Drill chuck reducing sleeves spindle tool -Price/Sale: complete -Weight: 9 kg

Tool holder, milling holder, milling tool -Number: 17x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -is only sold complete -Weight: 70 kg

First commissioning: 2016 Control: Heidenhain iTNC 530 incl. handwheel HR 520 X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 min-1 Torque: 95 Nm Tool holder: HSK 63A Tool tensioning: hydraulic Coolant supply: outside and inside Blowing air: Outdoor Drives Linear axes Feed speed X-, Y-, Z-axis: up to 60 m/min Axle acceleration X-, Y-, Z-axis: up to 5 m/s2 Connection data Connected load: 190 kVa Fuse: 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 9,000 x 5,650 mm Total weight: approx. 55,000 kg Colour Housing, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green  ...

Tool holder, milling tool holder -Number: 9x SK30 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -with transport box -Price/Sale: complete -Weight: 10 kg

Travel distances: 415 x 340 x 355 mm [ X x Y x Z ] HSC Machine Number of axles: 3  Control: Heidenhain iTNC 530  Table size X: 470 mm Table size Y: 400 mm workpiece weight: 500 kg Tool changer: 30 - fold Rapid traverse: 30 m/min electronic handwheel

KORRADI UW 10 with Heidenhain equipment, details see pictures, immediately available